共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
3.
4.
5.
《中国环保产业》2014,(2):4-7
环境保护部近日向国家发改委、工信部、财政部、商务部、人民银行等13个部门提供了《环境保护综合名录(2013年版)》(简称“综合名录”),同时向社会全文公开,将环境保护的要求有机融入经济发展过程。2007年以来,根据国务院有关工作部署要求,环境保护部组织有关工业行业协会和有关研究机构,开展了环境保护综合名录编制工作。综合名录为国家有关部门制定和调整相关产业、税收、贸易、信贷等政策,提供了环保依据。2011年,国务院印发的《关于加强环境保护重点工作的意见》(国发〔2011〕35号)和《国家环境保护“十二五”规划》(国发〔2011〕42号)都明确要求“制定和完善环境保护综合名录”。根据国务院要求,环境保护部继续组织研究提出了新的一批名录,并在汇总先前已经制定综合名录的基础上,形成了《环境保护综合名录(2013年版)》。综合名录包括三部分:(一)“高污染、高环境风险”产品名录(2013年版);(二)重污染工艺与环境友好工艺名录(2013年版);(三)环境保护重点设备名录(2013年版)。 相似文献
6.
7.
8.
《环境技术》2001,19(4):36
随着我国改革开放的深入发展,为适应社会主义市场经济建设需要,以及结合世界贸易组织的有关规定,国家质量技术监督局及时修订GB/T 1.1-1993版,于2000年12月20日批准、发布了GB/T 1.1-2000<标准化工作导则第1部分:标准的结构和编写规则>,并决定该项标准于2001年6月1日起实施. GB/T 1.1-2000是一项导则性的基础标准,是编写我国各类标准的指南.新标准和原标准相比,在体系、结构、内容和编写形式等方面均有重大调整,并非等效ISO/IEC导则第3部分:国际标准的结构和起草规则(1997年英文版).为做好该标准的实施工作,根据国家质量技术监督局的有关要求,各有关单位应做到: 1. 各专业标准化技术归口单位、有关企事业单位要切实重视和认真组织好该标准的学习. 2. 2001年6月1日起,起草单位要按GB/T 1.1-2000的要求编写国家标准、行业标准. 3. 2002年6月1日起,各单位报送中国机械工业联合会的国家标准草案、行业标准草案必须符合GB/T 1.1-2000规定的编写要求和格式.中国机械工业联合会将不再受理未按GB/T 1.1-2000要求编写的国家标准草案的审查和申报、行业标准草案的报批工作. 4. 委托中国机械工业标准化技术协会负责GB/T 1.1-2000的培训工作. □ 相似文献
9.
10.
11.
本文详细解读了IEC61215:2005标准中的紫外预处理试验。介绍了材料耐候性老化测试原理,包括户外老化及紫外光加速老化测试原理,从光谱的定义、辐照度的设定、温度及湿度控制等几个方面对IEC61215:2005标准中的紫外试验进行分析。最后指出QUV运行该标准时的参数设定。 相似文献
12.
随着用户对电能可靠性和质量要求的不断提升,智能电网、互动电网等技术逐步兴起。数字化变电站是智能电网的物理基础,国际电工委员会发布的IEC61850标准为数字化变电站技术奠定了理论基础。本文探讨了IEC61850规约在智能化一次设备以及数字化通信技术的发展及在500KV芝堰变电站的具体应用。 相似文献
13.
14.
15.
ISO16750《道路车辆电气及电子设备的环境条件和试验》系列国家标准转化已进入报批阶段。系列标准的第4部分《气候负荷》引用IEC 60068-2-14规定的试验N:温度变化(GB/T2423.22)中的试验Na:规定转换时间的温度快速变化和试验Nb:按规定温度变化速率的温度变化试验。2009年1月,IEC对60068-2-14进行了技术性改版。将IEC 60068-2-33《温度变化导则》(GB/T2424.13)的内容并入;对试验及温度变化容差的描述和要求、编辑和插图都做了修改和修订。等同采标的GB/T2423.22的改版修订工作已在进行,估计2010年稍晚就可以发布。这里就当前国际标准和将发布等同国标的试验方法对车载电子电器设备的温度变化试验进行描述,同时对试验要素和及其应用要素作一些介绍。ISO16750《道路车辆电气及电子设备的环境条件和试验》系列国家标准转化已进入报批阶段。系列标准的第4部分《气候负荷》引用IEC 60068-2-14规定的试验N:温度变化(GB/T2423.22)中的试验Na:规定转换时间的温度快速变化和试验Nb:按规定温度变化速率的温度变化试验。2009年1月,IEC对60068-2-14进行了技术性改版。将IEC 60068-2-33《温度变化导则》(GB/T2424.13)的内容并入;对试验及温度变化容差的描述和要求、编辑和插图都做了修改和修订。等同采标的GB/T2423.22的改版修订工作已在进行,估计2010年稍晚就可以发布。这里就当前国际标准和将发布等同国标的试验方法对车载电子电器设备的温度变化试验进行描述,同时对试验要素和及其应用要素作一些介绍。 相似文献
16.
17.
随着空调的发展,开关电源、可控硅及相关非线性器件的大量应用,一方面提高了人们对电能的利用效率;另一方面,非线性的电能转换又在电网中引入了大量谐波电流。作为对电网质量的控制及维护人体健康,我国相继出版了两个标准:GB17625.1《电磁兼容限值低压电气及电子设备发出的谐波电流限值(设备每相输入电流≤16A)》及GB17625.2《电磁兼容限值对额定电流不大于16A的设备在低压供电系统中产生的电压波动和闪烁的限值》(此两标准分别等同于IEC61000-3-2和IEC61000-3-3)。从标准号看,均为强制性标准,特别是在我国开展的强制性产品认证中,有相当一部分电气和电子产品需要进行谐波电流的发射测试,所以值得各相关企业特别注意。本文主要分析了其危害性、起因、对策。 相似文献
18.
Brian J. Harshburger Karen S. Humes Von P. Walden Brandon C. Moore Troy R. Blandford Albert Rango 《Journal of the American Water Resources Association》2010,46(3):603-617
Harshburger, Brian J., Karen S. Humes, Von P. Walden, Brandon C. Moore, Troy R. Blandford, and Albert Rango, 2010. Evaluation of Short-to-Medium Range Streamflow Forecasts Obtained Using an Enhanced Version of SRM. Journal of the American Water Resources Association (JAWRA) 46(3):603-617. DOI: 10.1111/j.1752-1688.2010.00437.x Abstract: As demand for water continues to escalate in the western United States, so does the need for accurate streamflow forecasts. Here, we describe a methodology for generating short-to-medium range (1 to 15 days) streamflow forecasts using an enhanced version of the Snowmelt Runoff Model (SRM), snow-covered area data derived from MODIS products, data from Snow Telemetry stations, and meteorological forecasts. The methodology was tested on three mid-elevation, snowmelt-dominated basins ranging in size from 1,600 to 3,500 km2. To optimize the model performance and aid in its operational implementation, two enhancements have been made to SRM: (1) the use of an antecedent temperature index method to track snowpack cold content, and (2) the use of both maximum and minimum critical temperatures to partition precipitation into rain, snow, or a mixture of rain and snow. The comparison of retrospective model simulations with observed streamflow shows that the enhancements significantly improve the model performance. Streamflow forecasts generated using the enhanced version of the model compare well with the observed streamflow for the earlier leadtimes; forecast performance diminishes with leadtime due to errors in the meteorological forecasts. The three basins modeled in this research are typical of many mid-elevation basins throughout the American West, thus there is potential for this methodology to be applied successfully to other mountainous basins. 相似文献
19.
Brian J. Harshburger Von P. Walden Karen S. Humes Brandon C. Moore Troy R. Blandford Albert Rango 《Journal of the American Water Resources Association》2012,48(4):643-655
Harshburger, Brian J., Von P. Walden, Karen S. Humes, Brandon C. Moore, Troy R. Blandford, and Albert Rango, 2012. Generation of Ensemble Streamflow Forecasts Using an Enhanced Version of the Snowmelt Runoff Model. Journal of the American Water Resources Association (JAWRA) 48(4): 643‐655. DOI: 10.1111/j.1752‐1688.2012.00642.x Abstract: As water demand increases in the western United States, so does the need for accurate streamflow forecasts. We describe a method for generating ensemble streamflow forecasts (1‐15 days) using an enhanced version of the snowmelt runoff model (SRM). Forecasts are produced for three snowmelt‐dominated basins in Idaho. Model inputs are derived from meteorological forecasts, snow cover imagery, and surface observations from Snowpack Telemetry stations. The model performed well at lead times up to 7 days, but has significant predictability out to 15 days. The timing of peak flow and the streamflow volume are captured well by the model, but the peak‐flow value is typically low. The model performance was assessed by computing the coefficient of determination (R2), percentage of volume difference (Dv%), and a skill score that quantifies the usefulness of the forecasts relative to climatology. The average R2 value for the mean ensemble is >0.8 for all three basins for lead times up to seven days. The Dv% is fairly unbiased (within ±10%) out to seven days in two of the basins, but the model underpredicts Dv% in the third. The average skill scores for all basins are >0.6 for lead times up to seven days, indicating that the ensemble model outperforms climatology. These results validate the usefulness of the ensemble forecasting approach for basins of this type, suggesting that the ensemble version of SRM might be applied successfully to other basins in the Intermountain West. 相似文献