Green Synthesis of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/Cellulose/Polyvinyl Alcohol Hybride Aerogel and Its Application for Dye Removal

A novel Fe₃O₄/cellulose–polyvinyl alcohol (PVA) aerogel was successfully synthesized by an eco-friendly and facile method in this work. Cellulose/PVA matrix was prepared through an environmental friendly physical cross-linking process and further in-situ decorated with Fe₃O₄. Series of Fe₃O₄ decorated aerogels were prepared and the effects of Fe₃O₄ nanoparticles (NPs) on the aerogels were systematic investigated. As-prepared aerogels exhibited desirable properties including nanostructure, relatively high porosity, improved mechanical and superparamagnetism. The TEM results showed that Fe₃O₄ NPs were integrated in the three-dimensional matrix of cellulose/PVA with a diameter of 9–12 nm. Furthermore, the mechanical strength of the aerogels was significantly enhanced after the introduction of Fe₃O₄ NPs. Meanwhile, the obtained Fe₃O₄/cellulose/PVA aerogel exhibited excellent adsorption performance toward methyl blue dye, and can be reused through fenton-like catalysts oxidative degradation of organic dye in H₂O₂ solution. Therefore, they will have a great potential application as eco-friendly and economical adsorbents.     

Long Term Trends in Concentration of Major Pollutants (SO<Subscript>2</Subscript>, CO,NO, NO<Subscript>2</Subscript>, O<Subscript>3</Subscript> and PM<Subscript>10</Subscript>) in Prague – Czech Republic (Analysis of Data Between 1992 and 2005)

To assess the effect of changes in traffic density and fuels used for heating at the beginning of the 1990s, 1992–2005 monthly averages of PM₁₀, SO₂, NO₂, NO, CO and O₃ from Prague, the Czech capital, were analyzed together with long term trends in emissions of major pollutants, fuel consumption and number of vehicles registered in Prague. The data from all monitoring stations were retrieved from the database of the state automated monitoring system. Correlation coefficients between ambient monthly averaged temperature and all pollutants of concern showed distinct seasonal trends. The results showed that while SO₂ and to some extent also CO concentrations dropped namely in the first half of the analyzed period (1992–1997) as a result decreased fossil fuel consumption for local heating, the behaviour of other pollutant concentrations followed a different pattern. PM₁₀ concentrations decreased during the beginning of the 1990s but showed a sign of increase after 2000. Concentrations of ozone and NO₂ did not reveal any significant change throughout the whole studied period. It can be concluded that during the studied period traditional urban sources of pollution, such as coal and oil combustion, lost their importance but were simultaneously substituted by pollutants from automotive transport (namely PM and NO₂) making the problem of air quality even worse.     

Preparation of MgCr<Subscript>2</Subscript>O<Subscript>4</Subscript> from waste tannery solution and effect of sulfate,chloride, and calcium on leachability of chromium

This paper presents a study regarding the preparation of MgCr₂O₄ from waste tannery solution, and chromium leaching behavior is also investigated with varying amounts of sulfate, chloride and calcium. The phase transformation, crystallinity index and crystallite diameter were characterized using XRD, FT-IR and thermal analysis. A well-crystallized MgCr₂O₄ was successfully prepared at 1400 °C. The sintering temperature had a major impact on the formation of MgCr₂O₄ compared with sintering time. The MgCr₂O₄ phase was observed initially at 400 °C and its crystallite diameter increased with increasing temperature. The concentration of total chromium leached and Cr(VI) decreased gradually with increasing temperature. The considerable amount of Cr(VI) was found in the leachate at 300–500 °C caused by Cr(VI) intermediary products. Sulfate and chlorine could impact the transformation efficiency of chromium adversely, and chlorine has a more significant effect than sulfate. The presence of calcium disturbed the formation of MgCr₂O₄ and new chromium species (CaCrO₄) appeared, which resulted in a sharp increase in the concentration of leached Cr(VI). Incorporating Cr(III) into the MgCr₂O₄ spinel for reusable products reduced its mobility significantly. This was demonstrated to be a promising strategy for the disposal of chromium containing waste resource.     

Influence of H<Subscript>2</Subscript> on the decomposition of halides by nonthermal plasma incorporated with in situ alkaline absorption

To control the emission of halides into the environment, an experiment on the nonthermal plasma decomposition of the halides CF₄, CHF₃, C₂HCl₃, and CHClF₂ was conducted in a wire-in-tube corona reactor. It was found that the decomposition of C₂HCl₃ and CHClF₂ was easy compared with the decomposition of CF₄ and CHF₃. With the addition of H₂ in N₂ gas, the decomposition ratio of CF₄, C₂HCl₃, and CHClF₂ increased. In contrast, the decomposition ratio of CHF₃ in a hydrogen-rich atmosphere was lower than that in an N₂ atmosphere. It was demonstrated that the yields of HF and/or HCl formed during halide decomposition clearly increased in the presence of H₂ in N₂ gas. Furthermore, in order to prevent the production of unwanted products from halide decomposition, a combination of plasma decomposition and in situ alkaline absorption was devised by coating a layer of Ca(OH)₂ onto the surface of the grounding electrode. It was demonstrated that the Ca(OH)₂ sorbent played an effective role as a scavenger, participating in halide decomposition by capturing reaction products such as HCl and HF, therefore resulting in increased halide decomposition.     

Preparation and characterization of mesoporous γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> recovered from aluminum cans waste and its use in the dehydration of methanol to dimethyl ether

The present study includes synthesis of two γ-Al₂O₃ samples from waste aluminum cans using a simple precipitation method. Precipitation was carried out using two different precipitating agents (i.e. NaOH and NH₄OH). The two prepared alumina samples were characterized by means of X-ray diffraction (XRD) and N₂ adsorption–desorption techniques. Surface acidity of γ-Al₂O₃ samples was measured by adsorption of two different probe molecules (i.e. pyridine and dimethyl pyridine) followed by desorption measurements using thermogravimetry (TG) and differential scanning calorimetry (DSC) techniques. Catalytic activity of the two prepared alumina samples towards the dehydration of methanol (to dimethyl ether) was studied in a fixed bed reactor at 300 °C. For comparison reasons, commercial γ-Al₂O₃ sample was, also, tested for the same catalytic reaction under the same conditions. Results showed that the alumina sample prepared using NaOH as a precipitating agent exhibited a better catalytic activity and stability compared with that prepared using NH₄OH and showed a similar activity as the commercial γ-Al₂O₃ sample.     

Photocatalytic Degradation of Poly(Vinyl Alcohol) on Pt/TiO<Subscript>2</Subscript> with Fenton Reagent

In this research Fenton reagent (Fe²⁺/H₂O₂) was investigated as oxidants to degrade poly (vinyl alcohol) (PVA). The role of nano-TiO₂ photocatalyst was discussed as an additive in Fenton reagent (Fe²⁺/H₂O₂). Pt/TiO₂ composites were also synthesized by photo-reaction to be used as additive in Fenton reagent. The rapid degradation of PVA was obtained when Pt/TiO₂ composites served as photocatalyst. The different photocatalytic efficiency of Pt/TiO₂- Fenton reagent (Fe²⁺/H₂O₂) was studied compared with TiO₂- Fenton reagent (Fe²⁺/H₂O₂) during the degradation of PVA.     

PM<Subscript>10</Subscript> and Ultrafine Particles Counts In-Vehicle and On-Road in the Athens Area

This work presents the first results of a study concerning on-road and in-vehicle exposure to particulate matter in the area of Athens. PM₁₀ concentration measurements were conducted by TSI DustTrak, while driving along routes with different characteristics of traffic density, during September 2003–March 2004. Concurrent measurements of the ultrafine particles (UFPs) number concentration were also conducted, by condensation particle counter during part of the days. Pedestrian exposure to PM₁₀ and UFPs was also studied through stationary measurements on the kerbside of selected roads on November 2003 and February 2004. A major avenue, a heavy-trafficked road across a children hospital and two central roads, one in a residential and one in a commercial area were selected for measurement. The results indicate that every day commuters are exposed to significant concentration levels. Higher exposures were observed in heavy-trafficked areas and during rush hours. Mean PM₁₀ in-vehicle and on-road concentrations ranged from 30–320 μg/m³ and 70–285 μg/m³, respectively. The ultrafine particles number concentrations were in the range of 5.0 × 10⁴–17.3 × 10⁴ particles/cm³ in-vehicle and 3.1 × 10⁴–7.3 × 10⁴ particles/cm³ on the kerbside of a central residential road. Both PM₁₀ and UFPs concentrations presented repeated short-term peak exposures. The results clearly point out the importance of the road microenvironment (in-vehicle and on kerbside) for population exposure in urban areas.     

Preparation of Water-Insoluble Antibacterial Materials with Surface-Grafted Material PSt/SiO<Subscript>2</Subscript> and Their Antibacterial Activity

Styrene (St) was graft-polymerized onto the surfaces of micro-sized silica gel particles, and the surface-grafted composite particles PSt/SiO₂ were obtained. With the surface-grafted composite particles PSt/SiO₂ as a starting material, water-insoluble antibacterial materials with quaternary ‘onium’ salt-type were synthesized via two polymer reaction steps. The grafted polystyrene was first chloromethylated, resulting in grafted particles CMPS/SiO₂, and then quaterisation (QN) and quaternary phosphonium reaction (QP) were conducted with triethylamine, tri-n-butylamine and triphenyl phosphine as reagents, respectively. Two kinds of water-insoluble antibacterial materials, QN-PSt/SiO₂ and QP-PSt/SiO₂ were prepared. Their antibacterial property was mainly investigated by using Escherichia coli (E. coli) as a model bacterium and by adopting colony count method. The relationship between the chemical structure of the antibacterial group and antimicrobial activity for the water-insoluble antibacterial materials was studied in detail, and their antibacterial mechanism was investigated by TTC-dehydrogenase activity determination and extracellular DNA and RNA measurement methods. The experimental results show that QN-PSt/SiO₂ and QP-PSt/SiO₂ possess strong antibacterial activity. The main factors affecting the antibacterial ability of the water-insoluble materials are the chemical structure of the antibacterial groups, the bound density of the antibacterial groups on the surface of the water-insoluble antibacterial materials as well as the pH value of the medium. QP-PSt/SiO₂ has stronger antibacterial activity than QN-PSt/SiO₂; the QN-PSt/SiO₂ prepared with tri-n-butylamine has stronger antibacterial activity than that prepared with triethylamine; the water-insoluble material with higher bound density of the antibacterial groups has stronger antibacterial ability; as the pH value of the medium is over the isoelectric point of E. coli, the antibacterial ability is strengthened with the increase of pH value.     

Photochemical Kinetic Modeling of Degradation of Aqueous Polyvinyl Alcohol in a UV/H<Subscript>2</Subscript>O<Subscript>2</Subscript> Photoreactor

This study presents a photochemical kinetics model to describe the degradation of water-soluble PVA (Polyvinyl Alcohol) polymer in a UV/H₂O₂ batch reactor. Under the effect of UV light, the photolysis of hydrogen peroxide into hydroxyl radicals can generate a series of polymer scission reactions. For a better understanding and analysis of the UV/H₂O₂ process in the cracking of the PVA macromolecules, a chemical reaction mechanism of the degradation process and a relevant photochemical kinetics model are developed to describe the disintegration of the polymer chains. Taking into account the probabilistic fragmentation of the polymer, the statistical moment approach is used to model the molar population balance of live and dead polymer chains. The model predicts the PVA molecular weight reduction, the acidity of the solution, and hydrogen peroxide residual. In addition to previously published data collected in this laboratory, a new set of experiments were conducted using a 500 mg/L PVA aqueous for different hydrogen peroxide/PVA ratios for model validation. Measurements of average molecular weights of the polymer, hydrogen peroxide concentrations and pH of the PVA solution were determinant factors in constructing a reliable photochemical model of the UV/H₂O₂ process. Experimental data showed a decrease in the PVA molecular weight and a buildup of the solution acidity. The experimental data also served to determine the kinetics rate constants of the PVA photochemical degradation and validate the model whose predictions are in good agreement with data. The model can provide a comprehensive understanding of the impact of the design and operational variables.     

Effect of additives on dechlorination of PVC by mechanochemical treatment

Polyvinyl chloride (–CH₂–CHCl–) _n (PVC) was ground with a powdered inorganic material (CaO, CaCO₃, SiO₂, Al₂O₃, or slag) in a planetary ball mill under atmospheric conditions to investigate the effect of additions on its dechlorination. The grinding causes a dehydrochlorinating reaction, forming a mixture of partially dechlorinated PVC and inorganic chloride, depending on the grinding time. The dechlorination increases as the grinding progresses, and is improved with increasing amounts of additives. The most effective additive is a mixture of CaO, SiO₂, and Al₂O₃, which has the same constituent components as blast furnace slag. CaO, a mixture of CaO, SiO₂, and blast furnace slag, are also effective, but CaCO₃ is the least effective additive tired. Received: August 3, 2000 / Accepted: September 21, 2000     

Photochemical Degradation of Aqueous Polyvinyl Alcohol in a Continuous UV/H<Subscript>2</Subscript>O<Subscript>2</Subscript> Process: Experimental and Statistical Analysis

Polyvinyl alcohol (PVA), being a dominant contributor of total organic carbon (TOC) in textile wastewater, is not easily degradable by conventional methods of wastewater treatment. This study investigates the degradation of aqueous PVA in a continuous UV/H₂O₂ photoreactor since the feeding strategy of hydrogen peroxide proves to have considerable effects on the process performance. Response surface methodology involving the Box–Behnken method is adopted for the experimental design to study the effects of operating parameters on the process performance. Experimental analysis shows that the TOC removal varies from 16.11 to 42.70 % along with a reduction of the PVA molecular weights from 56.7 to 95.3 %. The TOC removal is significantly lower than the molecular weight reduction due to the generation of the intermediate products during oxidation. Operating the UV/H₂O₂ process in a continuous mode facilitates the degradation of highly concentrated polymeric solutions using a relatively small hydrogen peroxide concentration in the feed with a small residence time ranges from 6.13 to 18.4 min.     

Synthesis,Characterization and NH<Subscript>3</Subscript>/N<Subscript>2</Subscript> Gas Permeation Study of Nanocomposite Membranes

Carbon nanotubes have exceptional mechanical properties which make them very attractive for the development of composite membranes. In this research, NH₃/N₂ gas permeation behavior of flat sheet composite membranes was examined. The cellulose acetate-multiwalled carbon nanotubes composite membranes were synthesized using solution casting method. The morphology and dispersion of carbon nanotubes were observed through SEM. However, the composite membranes were also characterized using several analytical techniques such as X-ray diffraction analysis, tensile testing analysis, and thermal gravimetric analysis. Characterization of these membranes depicted that carboxylic group functionalized MWCNTs are extremely compatible with CA. The permeation experiments were performed with NH₃ and N₂ to explore the host–guest interaction of MWCNTs with chosen gases. The permeability of NH₃ was found pronounced compared to N₂. The NH₃/N₂ selectivity up to 90 was documented.     

High Toughness and Fast Crystallization Poly(Lactic Acid)/Polyamide 11/SiO<Subscript>2</Subscript> Composites

A poly(lactic acid) (PLA)/polyamide 11 (PA11)/SiO₂ composite was mixed from PLA, PA11, and nanosilica particles through twin-screw extrusion. The PLA/PA11/SiO₂ composite was evaluated with tensile and Izod impact tests, light transmission and haze measurement, and isothermal and nonisothermal crystallization behavior determinations. The PLA/PA11/SiO₂ (97.0/3.0) composite had approximately 10.8% less ultimate tensile strength than neat PLA, but it had greater ductility and approximately ninefold greater elongation at break. A dimple morphology was observed on the fractural surface of the PLA/PA11/SiO₂ composite, indicating that the incorporation of PA11 and nanosilica particles increased the ductility of the PLA matrix. PLA with less than 3 wt% of PA11 and 0.5 phr of nanosilica particles had an Izod impact strength of 8.72 kJ/m². PA11 and nanosilica particles effectively toughened this PLA polymer; they accelerated both isothermal and nonisothermal crystallization rates and increased the crystallinities of the resulting composites under isothermal and nonisothermal crystallization processes.     

Effect of Nanoscale SiO<Subscript>2</Subscript> and TiO<Subscript>2</Subscript> as the Fillers on the Mechanical Properties and Aging Behavior of Linear Low-Density Polyethylene/Low-Density Polyethylene Blends

Linear low-density polyethylene (LLDPE) was blended with low-density polyethylene (LDPE) at a fixed ratio (80 wt LLDPE and 20 wt %LDPE) and filled with nanoparticles of SiO₂ and TiO₂ at a ratio up to wt 5%, so as to develop the polymeric composites suitable to preparing the agricultural micro-irrigation pipes having good environmental adaptability. These compounds were blended using calcium stearate, polyethylene wax, and titanate coupling agent as the auxiliary dispersants, and ethylene-vinyl acetate copolymer (EVA) as the toughness improver. The LLDPE/LDPE composites filled with the nanoparticles were extruded and injected to prepare the composites specimens for the performance evaluations and micro-irrigation pipe field test. The mechanical properties, thermostability, and processibility of the injected composites were investigated. The effect of heating in an oven and irradiating by ultraviolet on the mechanical properties of the composites was explored. The environmental adaptability of the micro-irrigation pipes made of the filled LLDPE/LDPE composites was evaluated making use of long-term outdoor field test in northwest China where the arid and harsh natural conditions are of great concerns. It was found that the LLDPE/LDPE blend with the LLDPE mass fraction fixed as 80% showed balanced mechanical and thermal properties and flexibility, and was suitable to be used as the basic resin matrix. The incorporation of nano-TiO₂ contributed to effectively improving the resistance to heating and ultraviolet irradiation of the composites. The composite made from 91% basic resin matrix, 6% EVA, and 3% mixed nano-SiO₂ and TiO₂, showed balanced comprehensive properties. The micro-irrigation pipes made of this filled LLDPE/LDPE composite had good environmental adaptability and service behavior in a three-year field test and were suitable to be used in arid area.     

Resurrection of the iron and phosphorus resource in steel-making slag

 This research focused on the treatment of steel-making slags to recycle and recover iron and phosphorus. The carbothermal reduction behavior of both synthesized and factory steel-making slag in microwave irradiation was investigated. The slags were mixed with graphite powder and heated to a temperature higher than 1873 K to precipitate a lump of Fe–C alloy with a diameter of 2–8 mm. The larger the carbon equivalent (C_eq, defined in the text), the higher the fractional reduction of iron and phosphorus. An increase in the SiO₂ content of slag led to a considerable improvement in the reduction for both iron and phosphorus because of the improvement in the fluidity of the slags and an increase in the activity coefficient of P₂O₅ in the slags. The extraction behavior of phosphorus from Fe–P–C_satd alloy was also investigated at 1473 K by carbonate flux treatment. For all the experiments with a processing time longer than 10 min, the phosphorus in the fluxes could be concentrated to more than 9% (w/w) showing that it could be used as a phosphorus resource. Compared with K₂CO₃ flux treatment, that using Na₂CO₃ was more effective for the extraction of phosphorus, and this was attributed to the lower evaporation of Na₂CO₃. Finally, a recycling scheme for steel-making slag is proposed. Received: March 16, 2001 / Accepted: November 12, 2001     

The use of waste basic oxygen furnace slag and hydrogen peroxide to degrade 4-chlorophenol

A new treatment method is developed to degrade 4-chlorophenol (4-cp) and its oxidation intermediates. The experimental results of this research demonstrate that 4-cp and its oxidation intermediates can be decomposed completely by basic oxygen furnace slag (BOF slag) with hydrogen peroxide (H₂O₂) in an acid solution. The factors that effect the treatment efficiency were studied including initial concentration of 4-cp, pH of the solution, concentration of H₂O₂ and amount of BOF slag. The BOF slags are final waste materials in the steel making process. The major components of BOF slag are CaO, SiO₂, Fe₂O₃, FeO, MgO and MnO. As the BOF slag in an acid solution, FeO and Fe₂O₃ can be dissociated to produce ferrous ion and ferric ion. Ferrous ion reacts with hydrogen peroxide to form “Fenton's reagent” which can produce hydroxyl radicals (OH^.). Hydroxyl radical possession of high oxidation ability can oxidize organic chemicals effectively. Results show that 100 mg/l of 4-cp is decomposed completely within 30 min by 438.7 g/l BOF slag with 8.2 mM hydrogen peroxide in pH=2.8±0.2 solution. The COD value of the solution is reduced from 290 to 90 mg/l. The factors studied which affect the 4-cp decomposition efficiency were the hydrogen peroxide concentration, BOF slag concentration, pH of the solution and initial concentration of 4-cp. Because large amounts of Fe₂O₃ and FeO are present in the BOF slag, the BOF slag not only has a high treatment efficiency, but also can be used repeatedly.     

Study of nitrogen oxide absorption in the calcium sulfite slurry

Experiments were conducted using a bubbling reactor to investigate nitrogen oxide absorption in the calcium sulfite slurry. The effects of CaSO₃ concentration, NO₂/NO mole ratio and O₂ concentrations on NO₂ and SO₂ absorption efficiencies were investigated. Five types of additives, including MgSO₄, Na₂SO₄, FeSO₄, MgSO₄/Na₂SO₄ and FeSO₄/Na₂SO₄, had been evaluated for enhancing NO₂ absorption in CaSO₃ slurry. Results showed that CaSO₃ concentration had significant impact on NO₂ and SO₂ absorption efficiencies, and the highest absorption efficiencies of SO₂ and NO₂ could reach about 99.5 and 75.0 %, respectively. Furthermore, the NO₂ absorption was closely related to the NO₂/NO mole ratio, and the existence of NO₂ in flue gas may promote NO absorption. The presence of O₂ in simulated flue gas was disadvantage for NO _x removal because it can oxidize sulfite to sulfate. It was worth pointing out that FeSO₄/Na₂SO₄ was the best additive among those investigated additives, as the NO₂ removal efficiency was significantly increased from 74.8 to 95.0 %. IC and in situ FTIR results suggest that the main products were NO₃ ^? and NO₂ ^? in liquid phase and N₂O, N₂O₅ and HNO₃ in gas phase during the CaSO₃ absorption process.     

The behaviors of H2, CH4, C2H4 and C3H6 from the decomposition of polypropylene by NiO/Si–Al catalyst

The purpose of this study was to investigate the possibility of light gases produced from polypropylene, specifically hydrogen. In particular, we examined the effect of operating conditions on gaseous product and compositions in the catalytic cracking of polypropylene. We also characterized the gaseous product generated from polypropylene cracking. The feedstock (2.0 g) mixed with NiO/SiO₂–Al₂O₃ (Si–Al) was used, under non-isothermal conditions at low temperature range between 380 and 500 °C. Argon gas was used to carry the pyrolyzed gas, and the gas collected in a tedlar bag was analyzed for its behavior. We observed the behavior of major gases (H₂, CH₄, C₂H₄ and C₃H₆, etc.) according to reaction time and temperature. Finally, the effect of reaction conditions on evolved gases from catalytic cracking of polypropylene was analyzed.     

Carbon dioxide utilization with carbonation using industrial waste-desulfurization gypsum and waste concrete

In this study, we propose a process making calcium carbonate and calcium sulfate and recovering absorbent using ammonia absorbent, carbon dioxide, and industrial waste. The main objective of this study is to confirm the possibility of carbon capture and utilization based on waste materials. We assumed desulfurization gypsum and construction waste (ready mixed concrete washing water, waste concrete, etc.) are CaSO₄, Ca(OH)₂, respectively. And concentration of simulated carbon dioxide gas was 15 vol% similar to flue gas. Calcium carbonate was produced by combination reaction between ionic CO₂ in absorbent and metal ion in the solid waste. Experiments were conducted at normal temperature and pressure. Furthermore, the generated products were characterized by X-ray diffraction, and scanning electron microscope.     

Whole-year-round Observation of N<Subscript>2</Subscript>O Profiles in Soil: A Lysimeter Study

Despite many studies of the N₂O emission, there is a lack of knowledge on the role of subsoil for N₂O emission, particularly in sandy soils. To obtain insight into the entrapment, diffusion, convection and ebullition of N₂O in the soil, the N₂O concentration in the soil atmosphere was measured over a period of 1 year in 4 lysimeters (agricultural soil monoliths of 1 m2 × 2 m) at 30, 50, 80, 155, and 190 cm depth with altogether 86 gas probes. Additionally the N₂O emission into the atmosphere was measured in 20 closed chambers at the soil surface. Concurrently the soil temperature and soil water content were recorded in order to quantify their effects on the fate of N₂O in the soil. Results of the continuous measurements between January and December 2006 were: N₂O concentrations were highest in the deeper soil; maximum concentration was found at a depth of 80 cm, where the water content was high and the gas transport reduced. The highest N₂O concentration was recorded after ‘special events’ like snowmelt, heavy rain, fertilization, and grubbing. The combination of fertilization and heavy rain led to an increase of up to 2,700 ppb in the subsoil.