Use and disposal of large home electronic appliances in Vietnam

In this study, e-waste flows of five large home appliances (color televisions, refrigerators, washing machines, personal computers, and air conditioners) in Vietnam are investigated. A social survey was performed to investigate the situation on using appliances in households as well as on the disposal of appliances by the first users. Future quantities of e-waste were estimated using a model that combines use of the Weibull distribution, the logistic function, and the population balance model. It was forecast that about 3.86 million appliances, or 114 000 tons, will be discarded in 2010, and about 17.2 million appliances, or 567 000 tons, in 2025, showing a rapid increase of e-waste in the near future.     

Generation of and control measures for, e-waste in Hong Kong

While accurately estimating electrical and electronic waste (e-waste) generation is important for building appropriate infrastructure for its collection and recycling, making reliable estimates of this kind is difficult in Hong Kong owing to the fact that neither accurate trade statistics nor sales data of relevant products are available. In view of this, data of e-products consumption at household level was collected by a tailor-made questionnaire survey from the public for obtaining a reasonable e-waste generation estimate.It was estimated that on average no more than 80,443 tonnes (11.5 kg/capita) of waste is generated from non-plasma and non-liquid crystal display televisions, refrigerators, washing machines, air-conditioners and personal computers each year by Hong Kong households. However, not more than 17% of this is disposed as waste despite a producer responsibility scheme (PRS) not being in place because of the existence of a vibrant e-waste trading sector. The form of PRS control that can possibly win most public support is one that would involve the current e-waste traders as a major party in providing the reverse logistics with a visible recycling charge levied at the point of importation. This reverse logistic service should be convenient, reliable and highly accessible to the consumers.     

The challenge of electronic waste (e-waste) management in developing countries

Information and telecommunications technology (ICT) and computer Internet networking has penetrated nearly every aspect of modern life, and is positively affecting human life even in the most remote areas of the developing countries. The rapid growth in ICT has led to an improvement in the capacity of computers but simultaneously to a decrease in the products lifetime as a result of which increasingly large quantities of waste electrical and electronic equipment (e-waste) are generated annually. ICT development in most developing countries, particularly in Africa, depends more on secondhand or refurbished EEEs most of which are imported without confirmatory testing for functionality. As a result large quantities of e-waste are presently being managed in these countries. The challenges facing the developing countries in e-waste management include: an absence of infrastructure for appropriate waste management, an absence of legislation dealing specifically with e-waste, an absence of any framework for end-of-life (EoL) product take-back or implementation of extended producer responsibility (EPR). This study examines these issues as they relate to practices in developing countries with emphasis on the prevailing situation in Nigeria. Effective management of e-waste in the developing countries demands the implementation of EPR, the establishment of product reuse through remanufacturing and the introduction of efficient recycling facilities. The implementation of a global system for the standardization and certification/labelling of secondhand appliances intended for export to developing countries will be required to control the export of electronic recyclables (e-scarp) in the name of secondhand appliances.     

E-waste assessment methodology and validation in India

An attempt has been made to establish an approach and a methodology to quantify electronic waste (e-waste) in India. The study was limited to personal computers (PCs) and televisions (TVs) within the state boundaries of Delhi and in selected areas in the National Capital Region (NCR). Material flow analysis was used to establish an e-waste trade value chain, where cathode ray tubes (CRTs) were tracked in the e-waste dismantling stream of the CRT regunning process. The market supply method was used to estimate the theoretical amount of e-waste for each item. Sensitivity analysis was carried out for PCs, using 5 years and 7 years as the average life, and for TVs, using 10 years and 12 years as the average life. Externalities such as e-waste entering the study area from outside were factored into the final e-waste analysis. Sensitivity analysis on the average life also factored in elements of active usage, reuse, and storage of electronic items and consumer behavior into assumptions about the obsolescence rate in market supply method. A primary survey indicated an output of 1800–2100 CRTs per day from all regunning units in the study area. This range validated the theoretical output for an average life of 7 years for a PC and 12 years for a TV. Using this approach, e-waste was estimated to reach 2 million units from the domestic market by 2010.     

Informal electronic waste recycling: a sector review with special focus on China

Informal recycling is a new and expanding low cost recycling practice in managing Waste Electrical and Electronic Equipment (WEEE or e-waste). It occurs in many developing countries, including China, where current gaps in environmental management, high demand for second-hand electronic appliances and the norm of selling e-waste to individual collectors encourage the growth of a strong informal recycling sector. This paper gathers information on informal e-waste management, takes a look at its particular manifestations in China and identifies some of the main difficulties of the current Chinese approach. Informal e-waste recycling is not only associated with serious environmental and health impacts, but also the supply deficiency of formal recyclers and the safety problems of remanufactured electronic products. Experiences already show that simply prohibiting or competing with the informal collectors and informal recyclers is not an effective solution. New formal e-waste recycling systems should take existing informal sectors into account, and more policies need to be made to improve recycling rates, working conditions and the efficiency of involved informal players. A key issue for China’s e-waste management is how to set up incentives for informal recyclers so as to reduce improper recycling activities and to divert more e-waste flow into the formal recycling sector.     

E-waste issues and measures in the Philippines

The continuous dependence on electronic equipment at home and in the workplace has given rise to a new environmental challenge: electronic waste. Electronic waste, or e-waste, refers to electronic products that no longer satisfy the needs of the initial purchaser. These can include a wide variety of goods, such as computers, cellular phones, TVs, refrigerators, air conditioners, washing machines, and video cameras. These pieces of equipment contain hazardous materials such as lead, beryllium, mercury, cadmium, and chromium that pose both an occupational and environmental health threat. Although electronic equipment is considered safe during use, the potential for release of the toxic constituents increases during storage or disposal. Because of the growing number of discarded electronic devices resulting from rapid product obsolescence, this type of waste is an emerging concern among developing countries. This study estimates the current and future quantity of e-waste in the Philippines, with a focus on televisions, refrigerators, air conditioners, washing machines, and radios. Data from the National Statistics Office (NSO) serve as the input to a simple end-of-life model for each type of electronic device. Mathematical equations are derived incorporating other factors, such as the number of electronic devices in use, current end-of-life management practices, serviceable years of the product, and disposal behavior of consumers. An accurate estimation of e-waste generation would be useful in policy making as well as in designing an effective management scheme to avoid the potential threats of health impacts or environmental pollution. Preliminary estimates show that at the end of 2005, approximately 2.7 million units became obsolete and about 1.8 million units required landfilling. Over a 10-year period from 1995 to 2005, approximately 25 million units became obsolete. An additional 14 million units are projected to become obsolete in the next 5 years.     

A material flow analysis on current electrical and electronic waste disposal from Hong Kong households

A material flow study on five types of household electrical and electronic equipment, namely television, washing machine, air conditioner, refrigerator and personal computer (TWARC) was conducted to assist the Government of Hong Kong to establish an e-waste take-back system. This study is the first systematic attempt on identifying key TWARC waste disposal outlets and trade practices of key parties involved in Hong Kong. Results from two questionnaire surveys, on local households and private e-waste traders, were used to establish the material flow of household TWARC waste. The study revealed that the majority of obsolete TWARC were sold by households to private e-waste collectors and that the current e-waste collection network is efficient and popular with local households. However, about 65,000 tonnes/yr or 80% of household generated TWARC waste are being exported overseas by private e-waste traders, with some believed to be imported into developing countries where crude recycling methods are practiced. Should Hong Kong establish a formal recycling network with tight regulatory control on imports and exports, the potential risks of current e-waste recycling practices on e-waste recycling workers, local residents and the environment can be greatly reduced.     

Difficulties in applying extended producer responsibility policies in developing countries: case studies in e-waste recycling in China and Thailand

Developing Asian countries have started to apply the principle of extended producer responsibility (EPR) to electronics and electrical equipment waste (e-waste). This policy approach aims to give electronic appliance manufacturers and importers responsibility for the collection and recycling of discarded electronic equipment. China and Thailand have drafted regulations on the recycling of e-waste with common characteristics such as the financial responsibility of producers and subsidies for collection. Although the proposed system is sensible, taking into account the fact that e-waste is a market-traded commodity, there are two major difficulties in implementing EPR in developing countries. First, it may be difficult for governments to collect funds from producers or importers if smuggled, imitation, or small shop-assembled products have a large share in the market. Second, the system creates incentives for collectors and recyclers to over-report the amount of collected e-waste in order to gain extra subsidies from the fund. Other policy measures such as the enforcement of pollution control regulations on informal recyclers, the prevention of smuggling, and the protection of intellectual property rights should accompany EPR policies.     

Policy trends of e-waste management in Asia

This paper examines the policy trends of electronic waste (e-waste) management in Asia. E-waste is a rapidly growing waste stream in the world today and is estimated to be growing at 3–5 % per annum. Fast paced obsolescence in the electronic sector has resulted in the generation of e-waste. There are concerns that e-waste generated in developed countries is ending up in developing countries especially in Asia resulting in adverse environmental and health impacts. Consequently, a number of countries in Asia are developing policy instruments to ensure the proper management of e-waste. These include e-waste regulatory frameworks, data and inventories, and infrastructure and capacity building. These trends indicate a positive development path towards sustainable e-waste management in Asia. Nevertheless, potential limiting obstacles for e-waste management in Asia may also include an over-reliance on legislation to drive e-waste management or the simplistic adoption of policies from developed countries without taking into context the local political, cultural and socio-economic waste management issues. Consequently, this paper suggest that e-waste policy development may require a more customized approach where, instead of addressing e-waste in isolation, it should be addressed as part of the national development agenda that integrates green economy assessment and strategic environmental assessment as part of national policy planning. In conclusion, policy trends of e-waste management in Asia appear promising provided there is a paradigm shift from an e-waste perception of an environment problem to a e-waste perception of a potential opportunity as sustainable national green growth strategy in Asia.     

小型废弃电器电子产品精细拆解与资源化利用初步探讨

随着工业化进程和社会生活的丰富,各种小型电器电子产品不断问世,相关废弃产品的拆解和资源化利用已经成为资源综合利用的重要课题.基于其分类与回收利用现状,就国内精细拆解与资源化利用问题进行了探讨,并以废弃手机为例,就处理原则、工艺流程设置和高值利用方法提出了一些建议.     

Potential e-waste generated from households in Indonesia using material flow analysis

Waste of electronic and electrical equipment (e-waste) generated in Indonesia is expected to increase due to high growth of the Indonesian economy and fast development in technology. As Indonesia has not yet had specified criteria on e-waste, in this study, e-waste is defined as any obsolete or unwanted electronic and electrical equipment that is introduced into the recycling and disposal process. The objective of this study is to estimate the e-waste generated in Indonesian households using the method of material flow analysis. The amount of generated e-waste could be used for constructing an e-waste recycling management system in Indonesia. E-waste materials that need to be treated could be known. In this study, some types of equipment, such as television, washing machine, refrigerator, personal computer, and mobile phone, were chosen to be tracers. Using the modified material flow analysis model proposed by Steubing et al. (Waste Manage 30:473–482, 38), the potential e-waste that was generated from households was estimated. The total estimated accumulation of generated e-waste from households in 2015 and 2025 is about 285,000 and 622,000 tonnes, respectively. If a proper recycling system was in place, a new source for valuable materials recovery would be created, as well as protecting the environment and health.     

Quantification and probabilistic modeling of CRT obsolescence for the State of Delaware

The cessation of production and replacement of cathode ray tube (CRT) displays with flat screen displays have resulted in the proliferation of CRTs in the electronic waste (e-waste) recycle stream. However, due to the nature of the technology and presence of hazardous components such as lead, CRTs are the most challenging of electronic components to recycle. In the State of Delaware it is due to this challenge and the resulting expense combined with the large quantities of CRTs in the recycle stream that electronic recyclers now charge to accept Delaware’s e-waste. Therefore it is imperative that the Delaware Solid Waste Authority (DSWA) understand future quantities of CRTs entering the waste stream. This study presents the results of an assessment of CRT obsolescence in the State of Delaware. A prediction model was created utilizing publicized sales data, a variety of lifespan data as well as historic Delaware CRT collection rates. Both a deterministic and a probabilistic approach using Monte Carlo Simulation (MCS) were performed to forecast rates of CRT obsolescence to be anticipated in the State of Delaware. Results indicate that the peak of CRT obsolescence in Delaware has already passed, although CRTs are anticipated to enter the waste stream likely until 2033.     

The Best-of-2-Worlds philosophy: Developing local dismantling and global infrastructure network for sustainable e-waste treatment in emerging economies

E-waste is a complex waste category containing both hazardous and valuable substances. It demands for a cost-efficient treatment system which simultaneously liberates and refines target fractions in an environmentally sound way. In most developing countries there is a lack of systems covering all steps from disposal until final processing due to limited infrastructure and access to technologies and investment. This paper introduces the ‘Best-of-2-Worlds’ philosophy (Bo2W), which provides a network and pragmatic solution for e-waste treatment in emerging economies. It seeks technical and logistic integration of ‘best’ pre-processing in developing countries to manually dismantle e-waste and ‘best’ end-processing to treat hazardous and complex fractions in international state-of-the-art end-processing facilities. A series of dismantling trials was conducted on waste desktop computers, IT equipment, large and small household appliances, in order to compare the environmental and economic performances of the Bo2W philosophy with other conventional recycling scenarios. The assessment showed that the performance of the Bo2W scenario is more eco-efficient than mechanical separation scenarios and other local treatment solutions. For equipment containing substantial hazardous substances, it demands the assistance from domestic legislation for mandatory removal and safe handling of such fractions together with proper financing to cover the costs. Experience from Bo2W pilot projects in China and India highlighted key societal factors influencing successful implementation. These include market size, informal competitors, availability of national e-waste legislation, formal take-back systems, financing and trust between industrial players. The Bo2W philosophy can serve as a pragmatic and environmentally responsible transition before establishment of end-processing facilities in developing countries is made feasible. The executive models of Bo2W should be flexibly differentiated for various countries by adjusting to local conditions related to operational scale, level of centralized operations, dismantling depth, combination with mechanical processing and optimized logistics to international end-processors.     

Estimation of future outflows of e-waste in India

The purpose of this study is to construct an approach and a methodology to estimate the future outflows of electronic waste (e-waste) in India. Consequently, the study utilizes a time-series multiple lifespan end-of-life model proposed by Peralta and Fontanos for estimating the current and future quantities of e-waste in India. The model estimates future e-waste generation quantities by modeling their usage and disposal. The present work considers two scenarios for the approximation of e-waste generation based on user preferences to store or to recycle the e-waste. This model will help formal recyclers in India to make strategic decisions in planning for appropriate recycling infrastructure and institutional capacity building. Also an extension of the model proposed by Peralta and Fontanos is developed with the objective of helping decision makers to conduct WEEE estimates under a variety of assumptions to suit their region of study. During 2007–2011, the total WEEE estimates will be around 2.5 million metric tons which include waste from personal computers (PC), television, refrigerators and washing machines. During the said period, the waste from PC will account for 30% of total units of WEEE generated.     

Electronic waste (e-waste): material flows and management practices in Nigeria

The growth in electrical and electronic equipment (EEE) production and consumption has been exponential in the last two decades. This has been as a result of the rapid changes in equipment features and capabilities, decrease in prices, and the growth in internet use. This creates a large volume of waste stream of obsolete electrical and electronic devices (e-waste) in developed countries. There is high level of trans-boundary movement of these devices as secondhand electronic equipment into developing countries in an attempt to bridge the 'digital divide'. The past decade has witnessed a phenomenal advancement in information and communication technology (ICT) in Nigeria, most of which rely on imported secondhand devices. This paper attempts to review the material flow of secondhand/scrap electronic devices into Nigeria, the current management practices for e-waste and the environmental and health implications of such low-end management practices. Establishment of formal recycling facilities, introduction of legislation dealing specifically with e-waste and the confirmation of the functionality of secondhand EEE prior to importation are some of the options available to the government in dealing with this difficult issue.     

Generation amount prediction and material flow analysis of electronic waste: a case study in Beijing, China.

The draft legislation on e-waste prepared by the Chinese national government assigns management responsibility to local governments. It is an urgent task for the municipal government to plan an effective system as soon as possible to divert the e-waste flow from the existing informal e-waste recycling processes. This paper presents a case study implemented in Beijing, the capital city of China, with the purpose of predicting the amount of obsolete equipment for five main kinds of electronic appliances from urban households and to analyse the flow after the end of their useful phase. The amount to be handled was 885,354 units in 2005 and is predicted to double by 2010. Due to consumption growth and the expansion of urbanization it is estimated that the amount will increase to approximate 2,820,000 units by 2020: 70% of the obsolete appliances will be awaiting collection for possible recycling, 7% will be stored at the owner's home for 1 year on average and 4% will be discarded directly and enter the municipal solid waste collecting system. The remaining items will be reused for about 3 years on average after the change of ownership. The results of this study will assist the waste management authorities of Beijing to plan the collecting system and facilities needed for management of e-waste generated in the near future.     

Waste electrical and electronic equipment (WEEE) management in Korea: generation, collection, and recycling systems

In Korea, generation of waste electrical and electronic equipment (WEEE), or electronic waste (e-waste), has rapidly increased in recent years. The management of WEEE has become a major issue of concern for solid waste communities due to the volumes of waste being generated and the potential environmental impacts associated with the toxic chemicals found in most electronic devices. Special attention must be paid when dealing with WEEE because of toxic materials that it contains (e.g., heavy metals, polybrominated diphenyl ethers, phthalates, and polyvinyl chloride). If managed improperly, the disposal of WEEE can adversely affect the environment and human health. Environmental regulatory agencies; electronic equipment manufacturers, retailers, and recyclers; environmental nongovernmental organizations; and many others are much interested in updated statistics with regard to how much WEEE is generated, stored, recycled, and disposed of. In Korea, an extended producer responsibility policy was introduced in 2003 not only to reduce the amount of electronic products requiring disposal, but also to promote resource recovery from WEEE; the policy currently applies to a total of ten electrical and electronic product categories. This article presents an overview of the current recycling practices and management of electrical and electronic waste in Korea. Specifically, the generation rates, recycling systems and processes, and recent regulations of WEEE are discussed. We estimated that 1 263 000 refrigerators, 701 000 washing machines, 1 181 000 televisions, and 109 000 airconditioning units were retired and handled by the WEEE management system in 2006. More than 40% of the products were collected and recycled by producers. Four major producers’ recycling centers and other WEEE recycling facilities are currently in operation, and these process a large faction of WEEE for the recovery of valuable materials. Much attention should still be paid to pollution prevention and resource conservation with respect to WEEE. Several suggestions are made in order to deal with electronic waste management problems effectively and to prevent potential impacts.     

Shared responsibility for managing electronic waste: A case study of Maine,USA

Based on high disposal and low recycling rates of electronic waste (e-waste) and continued exportation to developing countries, reliance on municipal responsibility for e-waste management has been unsuccessful in the United States. This case study examines Maine’s program, which was the first US state to mandate producer responsibility for recycling household e-waste. Maine’s program established a shared cost responsibility among producers, municipalities, and consumers. The study found that Maine’s program resulted in a significant reduction in disposal and a corresponding increase in environmentally sound recycling. In the first 3 years of the program, 6.406 million kg of household e-waste was collected and recycled for a population of 1.32 million. The new program, implemented in 2006, increased the number of e-waste items collected and recycled by 108% in the first year, 170% in the second year, and 221% in the third year. The program decreased direct economic costs to municipalities and households because of the shared cost approach and for the first time established costs for producers. There was no empirical evidence indicating that producers have or will improve the recyclability of electronic products to reduce recycling costs. While other weaknesses were that found potentially limit the adoption of Maine’s program, its positive aspects warrant consideration by other governments.     

Enhancing e-waste estimates: Improving data quality by multivariate Input–Output Analysis

Waste electrical and electronic equipment (or e-waste) is one of the fastest growing waste streams, which encompasses a wide and increasing spectrum of products. Accurate estimation of e-waste generation is difficult, mainly due to lack of high quality data referred to market and socio-economic dynamics. This paper addresses how to enhance e-waste estimates by providing techniques to increase data quality. An advanced, flexible and multivariate Input–Output Analysis (IOA) method is proposed. It links all three pillars in IOA (product sales, stock and lifespan profiles) to construct mathematical relationships between various data points. By applying this method, the data consolidation steps can generate more accurate time-series datasets from available data pool. This can consequently increase the reliability of e-waste estimates compared to the approach without data processing. A case study in the Netherlands is used to apply the advanced IOA model. As a result, for the first time ever, complete datasets of all three variables for estimating all types of e-waste have been obtained. The result of this study also demonstrates significant disparity between various estimation models, arising from the use of data under different conditions. It shows the importance of applying multivariate approach and multiple sources to improve data quality for modelling, specifically using appropriate time-varying lifespan parameters. Following the case study, a roadmap with a procedural guideline is provided to enhance e-waste estimation studies.     

Electrical and electronic waste management in China: progress and the barriers to overcome.

Serious adverse impacts on the environment and human health from e-waste recycling have occurred in the past and continue to occur in China today, due to a lack of national management strategies. China has made great efforts to face the challenges of the approaching peak increase in the domestic generation of e-waste and the illegal shipment of e-waste from other countries. This study examined recent progress and analysed the main problems associated with this issue in China. It was found that the material and the financial flows of e-waste in China had their own specific characteristics. Nearly 60% of the generated e-wastes were sold to private individual collectors and passed into informal recycling processes. More than 90% of Chinese citizens are reluctant to pay for the recycling of their e-waste. This is due to their traditional understanding that there remained value in these end-of-life products. Regulations concerning e-waste in China have been drafted but their deficiencies are obvious. The extended producer responsibilities (EPR) have been introduced but are not well defined. Eight formal facilities have been planned and are under construction or are in operation along the eastern coast of China but it will be difficult for them to compete with the informal processes for the reasons identified during the study.