企业环境绩效模糊综合评价

环境绩效评估指标体系的建立是企业环境绩效评估的关键环节.目前,中国指标体系方面已有一定的理论基础,但还不完善.为此,借鉴国外现有成果,建立中国企业环境绩效评估指标体系,并应用模糊综合法进行评价.     

江苏省企业环境绩效评估方法及指标体系研究

环境绩效评估，是一种开放而有效的环境管理工具。文中首先阐述了环境绩效评估的相关概念；然后就环境绩效评估的步骤和程序进行了介绍；并借鉴国内外现有成果，建立了由环境守法指标、环境管理指标、先进性指标和生命周期环境影响指标等主要指标构成的企业环境绩效指标体系；进而探讨了国外的经验对本省开展环境绩效评估的启示，以促进本省环境绩效评估的开展。     

印染废水处理技术与装置

印染厂是重要的环境污染源,印染废水是主要的有害工业废水之一.印染废水对环境的污染和对人体健康的影响是比较严重的.因此,世界各国都很重视印染废水的治理,开发了许多治理印染废水的行之有效的     

局部地区印染废水集中治理探索

分析了地区性的印染废水排放情况以及水污染治理的现状,综合比较了印染废水的主要处理工艺,对地区印染废水实施集中治理进行了初步设想,并推荐了主要处理工艺和流程,对提高行业水污染治理水平、改善区域环境质量具有探索性意义.     

嘉兴市印染行业中水回用率影响因素及对策研究

对嘉兴市3类印染企业中水回用率影响因素进行了全面调查,并对废水排放量大的化纤印染企业开展了典型调查.结果表明:嘉兴市印染企业共354家,小型企业占65.3％,微型企业占16.1％.化纤印染企业占57.6％,其原料和助剂用量最大,废水排放量最高.不同染色工艺中,溢流染色工艺COD产污系数最大,31家化纤印染、22家棉印染...     

印染废水集中处理工程的实例分析

针对印染企业集中园区产生的综合废水复杂多变,必要选择合式的处理工艺,因此,以某印染企业集中园区的污水处理厂为例,采用厌氧＋好氧＋物化组合工艺,并对废水的脱色和可生化性的改善进行了试验研究,通过类比调查,优化工程设计参数;经工程实践证明,综合印染废水经该工艺处理后,能达到一级排放标准.     

微絮凝-直接过滤工艺用于东江流域典型印染废水回用的实验研究

以东莞地区某典型印染企业尾水为研究对象,针对东江流域饮用水源河流水质污染现状及纳污河流水质改善目标要求与企业对尾水回用的实际需求,进行了印染废水深度处理回用工艺的适用性研究.通过混凝烧杯实验,选用工业PACl、FeSO4、HPAC 3种药剂,对微絮凝-直接过滤集成工艺用于印染废水尾水深度处理后水质回用的可行性,进行了实...     

基于层次分析法的人工湿地减排绩效评估指标体系研究

绩效减排有助于发挥减排工程潜力,为水污染减排提供更大空间.结合人工湿地特点,以水污染物减排为主要目标,从减排治污、资源利用、经济和管理指标选择了12个评估指标,并基于层次分析法对各个评价因子的权重进行了确定和判断,构建了人工湿地减排绩效评估指标体系,评估人工湿地减排绩效.通过科学分析人工湿地的减排绩效,优化人工湿地规划、设计和管理水平.     

印染生产工艺废水特性浅析

印染废水具有水量大、有机污染物浓度高、色度深、碱性大、水质变化大、成分复杂等特点，属较难处理的工业废水之一。作者根据海门地区印染企业实际生产情况，对印染生产工艺废水的特性进行了分析。     

印染企业节能减排状况与对策研究

印染企业生产成本中,能源成本约占总成本的70%.结合绍兴地区6家企业的清洁生产审核工作,通过采集各印染企业的能资源消耗数据,按照统一的能源统计方法进行折算,评估了能源成本比例构成.分析表明.水、电、蒸汽和煤的消耗与印染企业生产工艺、产品特点间有密切联系.同时,结合各印染企业的节能减排方案,提出了适合于印染企业有效开展节能减排工作的相关对策.     

Estimation of uncertainty of sampling for analysis of pesticide residues

Abstract

A computer model was used to take random samples from primary sample populations obtained from field trials to simulate the uncertainty of sampling for residue analysis of plant commodities and soil. The results indicate about 40%, 30% and 20% relative uncertainty when random samples of size 5, 10 and 25 are taken respectively, from a single lot. Therefore the sample size should be the same for establishing and enforcing legal limits.     

次氯酸钠发生器的研制

介绍了电解法生产次氯酸钠的原理 ,并在原有生产工艺的基础上进行了重新设计和对设备的重新选择、改造 ,得出了各个工艺参数的最佳值 ,生产出高品质的次氯酸钠     

不同泥源对厌氧氨氧化反应器启动的影响

采用2套上流式生物膜反应器,分别接种少量厌氧氨氧化污泥和大量硝化污泥,考察其对厌氧氨氧化反应器启动的影响。污泥接种入反应器后,测得接种厌氧氨氧化污泥的反应器(R1)内MLSS为0.22 g/L,另一个反应器(R2)MLSS为2.7 g/L。与直接接种厌氧氨氧化污泥相比,R1经过72 d的运行才显现出厌氧氨氧化特性。经过114 d的培养,前者氮去除速率由0.23 kg/(m3.d)提升到5.29 kg/(m3.d),总氮去除率大于89%;R2的氮去除速率由0.01 kg/(m3.d)提升到1.1 kg/(m3.d),总氮去除率大于84.6%。说明普通污泥启动需要一个较长的筛选过程,直接接种少量的厌氧氨氧化污泥比接种普通的污泥能够更快启动厌氧氨氧化反应器。     

An application of the theory of kinematics of mixing to the study of tropospheric dispersion

The most common technique used for numerical simulations of tracer mixing is that of the numerical solution of the advection–diffusion equation with the unresolved fluxes parameterized using the similarity theory. Despite correct predictions of the overall directions of transport, models based on a numerical solution of the advection–diffusion equation lack sufficient accuracy to correctly reproduce the coupling of mixing with small scale processes which are sensitive to the microstructure of the tracer distribution. The objective of this paper is to revisit the basic formalism employed in numerical models used to investigate atmospheric tracers. The main mathematical method proposed here is the theory of kinematics of mixing which could be applied effectively for simulations of atmospheric transport processes. At the beginning of the paper, we introduce simple mathematical transformations in order to demonstrate how complex topological structures are created by mixing processes. These idealistic flow systems are essential to explain transport properties of much more complex three-dimensional geophysical flows. An example of the application of the kinematics of mixing to the analysis of tracer transport on a planetary scale is presented in the following sections. The complex filamentary structures simulated in the numerical experiment are evaluated using some commonly applied statistical measures in order to compare the results with the data published in the literature. The results of the experiment are also analysed with the help of simple conceptual models of fluid filaments. The microstructure of the tracer distribution introduced in the paper is essential to increase our understanding of atmospheric transport and to develop more realistic parameterizations of small-scale mixing. The presented results could also be used to improve calculations of the coupling between microphysical processes and tracer mixing.     

造纸废水混凝处理中SFT助凝替代性研究

中小造纸厂废水处理常用PAC作混凝剂 ,PAM作助凝剂。由于PAM成本很高 ,影响了处理设备的投运率。用超细滑石粉 (SFT)替代PAM助凝 ,与混凝剂PAC配合 ,其混凝处理效果基本相当 ,但是处理成本降低 0 .10元 /m3 。由于SFT属环境无害材料 ,不会给排泥带来二次污染     

产油微藻培养与回收的关键技术研究进展

寻找廉价而高效的替代原料是实现生物柴油产业化的关键所在.微藻以含油量高、生长周期短、环境适应能力强、生物产量高等优点,有望成为一种极具潜力的生物柴油生产原料.然而,目前尚存在微藻培养低效成本高和微藻回收效率低两大难题.综述了微藻培养与回收过程中的关键技术,并对存在的两大难题及其改进技术进行了详细的探讨.最后,总结并展望了微藻培养、回收技术未来的发展趋势.     

红土吸附砷对其动电电位的影响

研究了遵义红土吸附砷对其动电电位的影响 ,从砷酸根浓度和体系pH对红土动电电位影响的角度作了探讨 ,结果表明 ,砷酸根离子浓度越大 ,Zata电位下降幅度越大 ,Zata电位也越低 ;随着体系pH的升高 ,氧化铁胶体动电电位逐渐下降 ,甚至改变了表面电位的符号。由此得出了红土吸附砷属于专性吸附的结论。     

活性炭三维电极法对印染废水的处理研究

对三维电极方法处理印染废水进行了实验研究,初步探讨了活性炭三维电极法处理印染废水的机理,对影响处理效果的各种要素,如反应时间、槽电压和pH值等进行了条件实验,得出了活性炭三维电极法处理印染废水的最佳运行条件为:停留时间120-180 min,槽电压25～30 V,进水pH值6.5～7.5。结果表明,该反应器能有效地降低废水色度,有较高的COD去除效率,并能提高印染废水的可生化性。     

生物质快速热裂解主要参数对生物油产率的影响

以松木木屑为原料,在自制的小型流化床上,开展了生物质热裂解温度、生物质粒径和进料速率对生物油产率的影响实验研究.结果表明,在热裂解温度分别为450、475、500、525和550℃条件下,当热裂解温度为500℃时,生物油产率最高,平均产率达到53.33%(质量百分比).反应温度越高,炭产量越低,不可冷凝气体产量越高,气体发热值越高;粒径＜1 mm的生物质其粒径对生物油产率影响不大;生物质进料速率增加时,生物油产率增加.本研究为生物能的利用提供了新的途径.     

Evaluation of the presence of drugs of abuse in tap waters

A total of seventy samples of drinking water were tested for non-controlled and illicit drugs. Of these, 43 were from Spanish cities, 15 from seven other European countries, three from Japan and nine from seven different Latin American countries. The most frequently detected compounds were caffeine, nicotine, cotinine, cocaine and its metabolite benzoylecgonine, methadone and its metabolite EDDP. The mean concentrations of non-controlled drugs were: for caffeine 50 and 19 ng L⁻¹, in Spanish and worldwide drinking water respectively and for nicotine 13 and 19 ng L⁻¹. Illicit drugs were sparsely present and usually at ultratrace level (<1 ng L⁻¹). For example, cocaine has mean values of 0.4 (Spain) and 0.3 ng L⁻¹ (worldwide), whereas for benzoylecgonine, these mean values were 0.4 and 1.8 ng L⁻¹, respectively. Higher concentrations of benzoylecgonine were found in Latin American samples (up to 15 ng L⁻¹). No opiates were identified in any sample but the presence of methadone and EDDP was frequently detected. Total mean values for EDDP were 0.4 ng L⁻¹ (Spain) and 0.3 ng L⁻¹ (worldwide). Very few samples tested positive for amphetamines, in line with the reactivity of chlorine with these compounds. No cannabinoids, LSD, ketamine, fentanyl and PCP were detected.