Energy and carbon balances of wood cascade chains

In this study we analyze the energy and carbon balances of various cascade chains for recovered wood lumber. Post-recovery options include reuse as lumber, reprocessing as particleboard, pulping to form paper products, and burning for energy recovery. We compare energy and carbon balances of chains of cascaded products to the balances of products obtained from virgin wood fiber or from non-wood material. We describe and quantify several mechanisms through which cascading can affect the energy and carbon balances: direct cascade effects due to different properties and logistics of virgin and recovered materials, substitution effects due to the reduced demand for non-wood materials when wood is cascaded, and land use effects due to alternative possible land uses when less timber harvest is needed because of wood cascading. In some analyses we assume the forest is a limiting resource, and in others we include a fixed amount of forest land from which biomass can be harvested for use as material or biofuel. Energy and carbon balances take into account manufacturing processes, recovery and transportation energy, material recovery losses, and forest processes. We find that land use effects have the greatest impact on energy and carbon balances, followed by substitution effects, while direct cascade effects are relatively minor.     

Can oligopsony power be measured? The case of U.S. old newspapers market

This paper uses an index analogous to Lerner-index in the input market to derive a price–cost margin that measures input exploitation by few large buyers. This paper identifies oligopsony characteristics associated with the old newspaper (ONP) input market for recycled-content newsprint manufacture and then examines the impacts of market performances on ONP input prices. The wastepaper recycling market, in particular, ONP has not been successful in utilizing the ONP generated. The existence of high sunk costs for entry to the market, along with the small numbers of buyers in the old newspapers market, were the reasons to believe that the waste paper industry had oligopsony elements among paper recycling mills. The regional oligopsony/oligopoly indices were derived and the impact of these market powers on ONP input prices were examined for period 1972–1995. The findings of this study were: oligopsony elements were present to certain degrees among the recycled-content newsprint manufacturers; and the oligopsony market power enabled these mills to exert a larger price–cost margin on ONP input market.     

Biomass use in chemical and mechanical pulping with biomass-based energy supply

The pulp and paper industry is energy intensive and consumes large amounts of wood. Biomass is a limited resource and its efficient use is therefore important. In this study, the total amount of biomass used for pulp and for energy is estimated for the production of several woodfree (containing only chemical pulp) and mechanical (containing mechanical pulp) printing paper products, under Swedish conditions. Chemical pulp mills today are largely self-sufficient in energy while mechanical pulp mills depend on large amounts of external electricity. Technically, all energy used in pulp- and papermaking can be biomass based. Here, we assume that all energy used, including external electricity and motor fuels, is based on forest biomass. The whole cradle-to-gate chain is included in the analyses. The results indicate that the total amount of biomass required per tonne paper is slightly lower for woodfree than for mechanical paper. For the biomass use per paper area, the paper grammage is decisive. If the grammage can be lowered by increasing the proportion of mechanical pulp, this may lower the biomass use per paper area, despite the higher biomass use per unit mass in mechanical paper. In the production of woodfree paper, energy recovery from residues in the mill accounts for most of the biomass use, while external electricity production accounts for the largest part for mechanical paper. Motor fuel production accounts for 5–7% of the biomass use. The biomass contained in the final paper product is 21–42% of the total biomass use, indicating that waste paper recovery is important. The biomass use was found to be about 15–17% lower for modelled, modern mills compared with mills representative of today's average technology.     

Regulation of discharge of organochlorines from pulp mills in Canada

Organochlorines are a group of chemicals including dioxins and furans, at least some of which are highly toxic to humans. Organochlorines are formed as a byproduct of the chlorine bleaching process in pulp mills, as well as in other ways. Current federal and provincial environmental protection legislation in Canada is too general to adequately deal with the problem of organochlorine discharge. In Sweden and Germany strict new guidelines have been set for the discharge of organochlorines; strict guidelines are also planned for Alberta. The author recommends that new regulations, dealing specifically with organochlorine discharge, be promulgated under the new Canadian Environmental Protection Act. The new regulations should apply equally to all pulp mills. Strict enforcement, through cooperation of federal and provincial authorities, is also advised.     

SIMULATED EFFECTS OF ALTERED SPILLWAY RELEASES ON THERMAL STRUCTURE AND KOKANEE GROWTH IN A COLORADO RESERVOIR1

ABSTRACT: In‐reservoir thermal and ecological effects of releasing some flows over the surface spillway at Blue Mesa Reservoir, Colorado, rather than routing all releases through the hypolimnetic outlet were evaluated using a calibrated and validated one‐dimensional thermal model (CE‐THERM) with a set of ecological models. Thermal model output indicated that surface water temperatures were influenced primarily by atmospheric conditions, but the release of warmer water over the spillway resulted in a thinner epilimnion and cooler metalimnetic water temperatures. Ecological model predictions indicated that spillway releases and associated temperatures resulted in lower growth rates for young‐of‐year (YOY) kokanee salmon (Oncorhynchus nerka) in the reservoir by up to 9 percent when compared with growth rates under baseline operations with no releases over the spillway. Kokanee growth rates were reduced under spillway release scenarios because lower temperatures not only affected metabolic rates, but limited the productivity of the zooplankton as well. Thus, altering the release regime with spillway discharges could have deleterious effects on Blue Mesa's YOY kokanee. However, in other reservoirs, distributing discharges among different elevations may provide managers with a mechanism to regulate temperatures to benefit species of concern that are facing challenges imposed by environmental conditions such as global warming.     

Inducing pollution prevention adoption: effectiveness of the 33/50 voluntary environmental program

The Environmental Protection Agency has encouraged voluntary efforts at pollution prevention by facilities through participation in voluntary environmental programs (VEPs) such as the 33/50 program to reduce toxic releases. This paper examines the effectiveness of the 33/50 program in the adoption of pollution prevention practices and disentangles the effect of adoption from that of program participation on releases of 33/50 chemicals. Using facility-specific panel data and controlling for the endogeneity of program participation and pollution prevention adoption, we find that program participants were 38% more likely to adopt pollution prevention practices than non-participants. Program participants who adopted pollution prevention practices reduced their 33/50 releases by 52% compared to facilities that neither participated nor adopted pollution prevention. This indicates that VEPs that emphasize pollution prevention can play a complementary role in reducing toxic releases.     

Deinking of recycled pulps using column flotation: energy and environmental benefits

Deinking of recycled pulps is an important operation intended to provide pulps appropriate for making paper and paperboard products from recycled wastepaper. Conventionally, deinking of recycled pulp is conducted in a flotation cell equipped with an agitator. We have investigated the applicability of a new flotation cell based on a column without an agitator present to accomplish the deinking of typical wastepaper feedstocks and also a feedstock consisting of rejects from a conventional deinking cell. Experimental results on the deinking operation indicate that it is possible to achieve deinking of a mixture of photocopier and laserprinted paper in the column flotation cell. The performance of the column, as measured by the resultant pulp’s brightness and ink particle size distributions, is comparable to that of a conventional laboratory cell which incorporates severe agitation regimens. Thus, it is found that the agitator can be eliminated by using the column flotation design which could yield significant electrical energy savings in addition to savings in capital costs and other operational and maintenance costs. A series of deinking experiments were also performed on a feedstock consisting of rejected waste obtained from a conventional cell in a pilot plant. We found that deinking of the rejected waste could yield significant usable fiber. This indicates the potential of the column flotation technique in enhancing the reuse of a waste component thus reducing the volume of deinking waste rejected into the environment.     

EVALUATION OF EROSION CONTROL PRODUCTS WITH AND WITHOUT ADDED POLYACRYLAMIDE1

ABSTRACT: Polyacrylamide (PAM) has been demonstrated to greatly reduce erosion in furrow irrigation, but much less is known about its effectiveness on the much steeper slopes typical of construction sites. The purpose of this study was to determine if anionic PAM would enhance erosion control either alone on bare soil or in combination with four types of ground covers commonly used for grass establishment: straw, straw erosion control blanket (ECB), wood fiber, and mechanically bonded fiber matrix (MBFM). Tests were conducted under natural rainfall and vegetation on a 4 percent slope (bare soil, straw, ECB, and MBFM) or using a rainfall simulator (bare soil, straw, wood fiber, MBFM) on either 10 percent or 20 percent slope on three different soil substrates. All ground cover treatments were evaluated with and without PAM applied in solution at 19 kg/ha. The straw, ECB, and MBFM significantly reduced runoff volume, average turbidity, and total sediment lost over five rainfall events on the vegetated plots. The addition of PAM to ground covers only occasionally had significant effects on runoff parameters but did significantly increase vegetative coverage overall. The rainfall simulator tests produced similar results after four events, with the straw, wood fiber, and MBFM all having significantly lower turbidity than the bare soil. The PAM significantly reduced turbidity for both the first and second events but did not consistently improve runoff quality after multiple rainfall events for any ground cover‐soil combinations tested. Separate tests of PAM applied before or after straw did not indicate a clear advantage of either approach, but runoff turbidity was often significantly reduced with PAM, especially at the 20 percent slope. Turbidity reductions were attributed to flocculation of eroded sediment.     

A Systems Approach to Materials Flow in Sustainable Cities: A Case Study of Paper

This study develops a modelling framework within which the effects of technology choice and policy on the sustainability of cities may be assessed. A life cycle accounting system for environmental impacts is combined with systems analysis, to represent the flows of resources into cities, the wastes and pollution generated and the technological choices available in an urban environment. The approach is demonstrated through a case study of the demand for paper and management of wastepaper. The case study questions the applicability for paper of the accepted 'hierarchy' of waste management techniques; incineration imposes lower environmental costs than recycling, and consequently lower total costs under some circumstances.     

Material flow analysis of paper in Korea. Part I. Data calculation model from the flow relationships between paper products

The flows of paper are analyzed throughout the papermaking processes, with the year 2007 and Korea defined as the system boundaries. In practice, the statistical data on the production, import and export of paper or pulp can be collected with relative ease from the government and industrial associations. However, the input data regarding the volumes of pulp and wastepaper used in different paper products, such as newsprint, printing papers, sanitary and household papers, specialty papers, and corrugating board base, are difficult to obtain because such information is generally kept confidential in the course of corporate operations.The production processes of paper products in Korea are modeled using information on raw materials, their compositions and production yields of products in order to identify and quantify the amounts of pulp and wastepaper used in each paper product. The material flows of paper are then analyzed based on the calculation model derived from the correlation of input and output flows between the individual processes throughout the entire paper lifecycle. Accuracy analysis using both mean absolute error (MAE) and mean absolute percent error (MAPE) is conducted to verify the amounts of pulp and wastepaper calculated from the proposed model against the volumes of domestically consumed pulp and wastepaper provided in the national statistics. Although the calculated values for the past (i.e., the 1980s and 1990s) differ to some degree from the statistical values, the data for the 2000s have a relatively higher level of accuracy, with the MAPE of the total pulp and recycling volume at 5.39% and 5.30%, respectively, thus validating the adequacy of the proposed modeling method. The proposed calculation model can be effectively used in the material flow analysis (MFA) of paper to reduce the burden of data collection and obtain relatively accurate results.     

Trends in Toxic Chemical Releases: A Case Study on the Drug Industry in Connecticut and New Jersey

To analyse trends in toxic chemical releases, an empirical study was conducted on Connecticut's and New Jersey's drug industry. It was the purpose of this study to investigatethese trends based on the following three questions: first, what is the trend of toxic chemical releases in the drug industry?; second, does the drug industry show patterns of qualitative growth?;and third, does the drug industry show substantial release reductionsof chemicalsknown to be highly toxic to public health and ecosystems? This analysis used the Toxics Release Inventory TRI data from 1988 to 1993. Given the trends, plausible driving forces for the observed changes in toxic chemical releases in the drug industry over the past five years are discussed. The study contends that the following four driving forces are most important in the illustrated development:the TRI, a publicly available database, can be used to reveal severe polluters; the TRI increased corporations' awareness of effective toxic chemical releases and may be used to reflect corporations' communicated commitment to sustainable development; federal and state environmental protection agencies enhance pollution prevention activities in a co-operative manner; and finally, since the late 1980s, the awareness of the business benefits of pollution prevention continuously increases.     

Recycling and consumption in Germany and Japan: a case of toilet paper

This paper compares the recycling attitudes of consumers in Germany and Japan, based on our nationwide questionnaires. We analyzed consumption behavior as well as recycling behavior in narrow sense, because it is important to study the former to see how the supply of recycled materials is balanced with the demand, particularly in Japan which exports little recycled materials. Toilet paper was adopted as a specific good for study, because consumers have options of buying virgin products and recycled products. It was found that German households pay for waste collection specifically and have higher recycling rates than Japanese households. On the other hand, similar figures in German and Japanese consumers were observed with regard to consumption of recycled products. Their purchasing criteria and preference on virgin and recycled products of toilet paper were examined by self-report and blind test with 2×2 experimental design for toilet paper (German versus Japanese, virgin versus recycled). Blind test showed that people prefer domestic and virgin products in both countries. Half of respondents rating virgin products guessed that the products contained recycled material. For Japanese, the material of the sample toilet paper, made from virgin pulp, seems to be a more determining factor than the nationality of products, i.e. made in Japan. On the other hand, for Germans, the domestic nature seems to be a more dominant factor than the material, i.e. made from virgin material. Canonical discriminant analysis in conjunction with logistic regression based on self-reporting data detected the characters ‘multiplied’, ‘appearance’ and ‘brand’ as major factors making the difference in preference between the two countries. The possible reasons causing the similarity and dissimilarity between the two countries are discussed with reference to the background history.     

STEREOTYPICAL PROCESSING: THE ROLE OF ENVIRONMENTAL CONTEXT

Previous research examining stereotype dilution had illustrated the importance of task instructions (Neuberg & Fiske, 1987), outcome dependence (Erber & Fiske, 1984; Neuberg & Fiske, 1987), and information about the target individual (Krueger & Rothbart, 1988; Macrae et al., 1992). This paper presents two studies investigating the stability of an occupational stereotype under different environmental conditions. Specifically it examines the maintenance and dilution of stereotypical judgements about licensees (pub managers) amongst undergraduate students. The results of the first study provide evidence for a context-free stereotype about public house licenses. However, results from the second study suggest that this stereotype is influenced by environmental conditions. That is, subjects do not simply continue to stereotype regardless of context, rather, under certain environmental conditions they individuate and reduce the impact of their stereotypical judgements. Implications for stereotype research and the role of environmental variables are made.     

A harvest failure approach to assess the threat from an invasive species

We present the idea of using potential infringements on annual allowable harvest targets as an approach to estimate threats from invasive species to the forest products sector. The approach uses present-day harvest levels as a reference level to estimate when and where the impact of a nonnative forest pest could become economically damaging. We use a generic model that simulates spread and damage by nonnative invasive species, basic harvest and forest growth through time. The concept is illustrated with a case study of a new nonnative invasive pest, Sirex noctilio Fabricius on pine resources in eastern Canada. Impacts of invasion on wood supply, in particular, the point at which present-day harvest levels are not attainable, were identified for 77 non-overlapping geographical regions that delimit the primary wood supply areas around large mills and wood processing facilities in eastern Canada. The results identify the minimum area of a pest outbreak that could trigger harvest shortages (approximately 12.5–14 M ha of pine forests in Ontario and Quebec). Beyond this level, the amount of host resource available for harvesting in any given year declines rapidly. The failure to sustain broad-scale harvest targets may be an attractive and intuitive indicator for policy makers and regulators interested in developing control and “slow-the-spread” programs for non-native forest pests.     

ACUTE RESIDUAL TOXICITY OF SEVERAL DISINFECTANTS IN DOMESTIC AND INDUSTRIAL WASTE WATER1

ABSTRACT: This study determined the acute toxicity of waste water disinfected with chlorine, bromine chloride, or ozone. The residual toxicity of effluent dechlorinated with sulfur dioxide was also tested. Toxicity tests were conducted with cyprinid, salmonid, and centrarchid fishes, as well as several species of fresh water macroinvertebrates. Residual chlorine exhibited the greatest toxicity of the disinfectants tested; dechlorination with sulfur dioxide effectively eliminated the toxicity of chlorinated effluent. Residual ozone produced mortality in test animals only under special conditions where subjects were exposed to effluent immediately after it was contacted with ozone, and chlorobrominated effluent was more toxic to salmonids than chlorinated effluent.     

An econometric model of wastepaper recycling in the USA

A simultaneous model describing the demand for and supply of wastepaper in the USA during 1952-74 has been estimated using the three stage least squares procedure. In our analysis, a low supply elasticity coupled with a zero price elasticity of demand explains the volatile nature of wastepaper prices. The structural estimates indicate that neither the elimination of differential rail freights nor the elimination of preferential tax treatment of stumpage profits will have a significant effect in stimulating the recycling effort.     

Influences on Wood Load in Mountain Streams of the Bighorn National Forest,Wyoming, USA

We documented valley and channel characteristics and wood loads in 19 reaches of forested headwater mountain streams in the Bighorn National Forest of northern Wyoming. Ten of these reaches were in the Upper Tongue River watershed, which has a history of management including timber harvest, tie floating, and road construction. Nine reaches were in the North Rock Creek watershed, which has little history of management activities. We used these data to test hypotheses that (i) valley geometry correlates with wood load, (ii) stream gradient correlates with wood load, and (iii) wood loads are significantly lower in managed watersheds than in otherwise similar unmanaged watersheds. Statistical analyses of the data support the first and third hypotheses. Stream reaches with steeper valley side slopes tend to have higher wood loads, and reaches in managed watersheds tend to have lower wood loads than reaches in unmanaged watersheds. Results do not support the second hypothesis. Shear stress correlated more strongly with wood load than did stream gradient, but statistical models with valley-scale variables had greater explanatory power than statistical models with channel-scale variables. Wood loads in stream reaches within managed watersheds in the Bighorn National Forest tend to be two to three times lower than wood loads in unmanaged watersheds.     

Progress report on EPA's 33/50 program: Reducing toxic risks through voluntary action 33/50 program office

EPA's 33/50 Program calls for voluntary industry reductions of toxic wastes, aimed at achieving an overall national reduction of 33 percent by 1991 and 50 percent by 1995. The seventeen high-priority toxic chemicals included in the program accounted for 1.4 billion pounds of releases and transfers in 1988; a 50-percent reduction would eliminate 700 million pounds by 1995. As of June 1991, 236 companies have committed to an average reduction commitment of more than 200 million pounds. Thousands more companies are being invited to participate.     

A NOVEL CHLORAMINE COMPOUND FOR WATER DISINFECTION1

A new chloramine agent, 3-chloio-4, 4-dimethyl-2-oxazolidinone, has been tested in a laboratory scale water treatment plant as to its efficacy in water disinfection. The agent seems to be equally effective as compared to chlorine gas in this application. The results of preliminary toxicity studies on the agent are very encouraging. The agent has a long shelf life both in water solution and in the solid state. Being a solid, the agent is clearly less hazardous to handle than chlorine gas. The agent appears to inhibit oxidative corrosion of metals as well. The agent is less likely to produce toxic halocarbons (e.g., chloroform) in water than is chlorine gas. Possibly most important from the standpoint of water disinfection, the agent is a “slow release” one for its positive chlorine, which provides prolonged bactericidal activity.     

EFFECT OF THE PAPER INDUSTRY ON WATER QUALITY OF THE LOWER FOX RIVER1

ABSTRACT: The Lower Fox River, Wisconsin, hosts the densest concentration of paper mills in the US., with 18 located along a 4Gde stretch between Lake Winnebago and Green Bay, Lake Michigan. Some of these companies use only primary, others also secondary, waste treatment techniques. Comparison of the quantities of wastes discharged with the legal limits indicates that all plants discharge only 40-50 percent or less of the allowable suspended solids; most discharge < 50 percent of the allowable BOD. This is equal or better than the performance of paper companies elsewhere in the state. Reductions in pollutant discharges have corresponded to improved water quality, though too much BOD is still discharged to be adequately assimilated by the Fox River. The relatively low current level of discharges means permit levels would have to be drastically cut to make any significant impact on water quality. Only a few companies might be seriously affected by such changes. Flow and temperature related permits would likely be more effective, but more difficult to comply with for the industry. Toxic substances are also a potential problem, particularly chlororganic compounds that can form in situ from the chlorine frequently used for pulp bleaching.