Effects of long-term soil amendment with sewage sludges on soil humic acid thermal and molecular properties

Sewage sludges are frequently used as soil amendments due to their high contents of organic matter and nutrients, particularly N and P. However, their effects upon the chemistry of soil humic acids, one of the main components of the soil organic matter, need to be more deeply studied in order to understand the relation between organic matter structure and beneficial soil properties. Two sewage sludges subjected to different types of pre-treatment (composted and thermally dried) with very different chemical compositions were applied for three consecutive years to an agricultural soil under long-term field study. Thermal analysis (TG–DTG–DTA) and solid-state ¹³C NMR spectroscopy were used to compare molecular and structural properties of humic acids isolated from sewage sludges, and to determine changes in amended soils. Thermally dried sewage sludge humic acids showed an important presence of alkyl and O/N-alkyl compounds (70%) while composted sludge humic acids comprised 50% aromatic and carbonyl carbon. In spite of important differences in the initial chemical and thermal properties of the two types of sewage sludges, the chemical and thermal properties of the soil humic acids were quite similar to one another after 3 years of amendment. Long-term application of both sewage sludges resulted in 80–90% enrichment in alkyl carbon and organic nitrogen contents of the soil humic acid fraction.     

Effects of long-term soil amendment with sewage sludges on soil humic acid thermal and molecular properties

Sewage sludges are frequently used as soil amendments due to their high contents of organic matter and nutrients, particularly N and P. However, their effects upon the chemistry of soil humic acids, one of the main components of the soil organic matter, need to be more deeply studied in order to understand the relation between organic matter structure and beneficial soil properties. Two sewage sludges subjected to different types of pre-treatment (composted and thermally dried) with very different chemical compositions were applied for three consecutive years to an agricultural soil under long-term field study. Thermal analysis (TG–DTG–DTA) and solid-state ¹³C NMR spectroscopy were used to compare molecular and structural properties of humic acids isolated from sewage sludges, and to determine changes in amended soils. Thermally dried sewage sludge humic acids showed an important presence of alkyl and O/N-alkyl compounds (70%) while composted sludge humic acids comprised 50% aromatic and carbonyl carbon. In spite of important differences in the initial chemical and thermal properties of the two types of sewage sludges, the chemical and thermal properties of the soil humic acids were quite similar to one another after 3 years of amendment. Long-term application of both sewage sludges resulted in 80–90% enrichment in alkyl carbon and organic nitrogen contents of the soil humic acid fraction.     

Long-term effect of sewage sludge application on soil humic acids

Sewage sludges are used in agriculture because they act as a fertilizer. Long-term studies are needed to evaluate the effect of sewage sludge on soil properties by paying particular attention to the soil organic matter. Soil plots were amended for 10 years with 1Mg dry matter ha(-1)year(-1) of sewage sludge. Chemical parameters such as total organic carbon (TOC), N, C/N ratio and CEC were determined when this period ended. Moreover, TOC was fractionated into humified and non-humified fractions. Humic acids (HA) were isolated and studied by elemental analysis, DRIFT, (1)H NMR and CPMAS 13C NMR spectroscopies. At the end of the tests, compared to the control soil, the sludge-amended soil did not exhibit change in total organic C and related humified fractions. However, the HA composition of the soil treated with sludge had developed an HA composition closer to that of the HA-sludge as a result of the enrichment of recalcitrant fractions contained in the sludge.     

Temporal evolution of polycyclic aromatic hydrocarbons (PAHs) in sludge from wastewater treatment plants: comparison between PAHs and heavy metals

This paper presents results on the presence and temporal variability of the 16 PAHs recommended by the EPA in primary, secondary and digested sewage sludge over a year. The sewage sludges originated from the Guadalete wastewater treatment plant (WWTP) site in Jerez de la Frontera (Cádiz, Spain). These organic pollutants have been extracted from the sewage sludge by microwave energy. High performance liquid chromatography coupled with diode array (HPLC-DAD) or fluorescence (HPLC-FL) detectors have been used. The results showed that total PAHs concentration varied between 1,945 ng g(-1) dry matter (DM) for primary sludges collected in March and 10,100 ng g(-1) DM for primary sludge collected in June. Generally, concentrations of PAHs were higher in compost and digested sludge than in fresh one. On the other hand, the highest concentration of PAHs were found on summer. This thing is associated to the traffic increase from inland zones to the coast (Jerez de la Frontera is very near to beaches). Finally, this paper present a comparative study of the American an European legislation concluding that the limits of concentrations established are not exceeded. In addition heavy metals were analysed. The origin of PAHs and heavy metals seems to be different.     

Heavy metal binding by the polymeric organic fractions of sewage sludges

Organic complexes in sewage sludge play an important role in the speciation and transformation of metals into potentially more toxic and bioavailable forms. Two organic fractions, bacterial extracellular polymer and fulvic acid, were extracted from mixed liquor and digested sewage sludge by methods established as the most appropriate. The homogeneity of the extracts was verified using gel permeation chromatography. Conditional stability constants and complexation capacities of the organic fractions from the sludges with copper, cadmium, nickel and zinc have been determined using equilibrium dialysis titration. Organic fractions extracted from digested sludge demonstrated a greater capacity to complex metals over mixed liquor extracts. Copper formed stronger complexes than nickel with the mixed liquor biomass and cadmium exhibited the greatest affinity for digested sludge organic matter.     

中国部分城市污泥中矿质元素形态与生物可利用性研究

近年来随着城市污水处理厂数目迅速增加,低成本、高效率的污泥农用受到越来越多的关注。研究从北到南的五家污水处理厂消化污泥中矿质元素的含量和形态分布,为污泥资源化的合理利用提供科学参考。结果表明：消化污泥总体呈高有机质、高氮磷、低K、高矿质元素营养的相似性,但其理化性质如阳离子交换容量(CEC)、pH等差异较大,对矿质元素的形态分布与生物可利用性有明显的影响。同种元素在不同污泥中含量的差异较大,相差数倍,甚至十倍以上。污泥中不同元素含量明显不同,Fe的浓度最高,次之是Mg、Zn、B的浓度最低。连续提取研究表明,污泥pH对污泥中矿质元素的形态分布有明显影响,酸性污泥(厦门污水处理厂)中各矿质元素酸溶／交换态百分率明显高于其他污泥。Cu主要分布在氧化态;Zn的三态分布百分率均在10％以上;Mg、Mn的酸溶／交换态含量较高;Fe主要分布在残渣态;B氧化态和还原态的百分率较高。建议在全国范围内进行一次污水处理厂污泥品质调查,为污泥合理农用提供科学依据。     

Changes of polycyclic aromatic hydrocarbons during composting of sewage sludges with chosen physico-chemical properties and PAHs content

The aim of the experiment was to determine changes in the PAH content during sewage sludge composting. The extent was evaluated to which sewage sludge properties influences on PAHs losses during composting. Five municipal sewage sludges were studied from sewage treatment plants located in the south-east of Poland, i.e. in Stalowa Wola, Kra?nik, Lublin, Zamo?? and Bi?goraj. The treatment plants selected were characterised by their differentiation with catchments area as well as the industrial character of the areas. Sludge composting was carried out in aerobic conditions in plastic containers for a period of 76 days. The content of 14 polycyclic aromatic hydrocarbons (PAHs) and some physical-chemical (TOC, Nt, TOC/Nt, CEC, BS, TEB, pH, available potassium and phosphorus, total forms of cations) sewage sludge properties were monitored. In the present study correlations between PAHs losses (during various phases of composting) and physical-chemical properties of sewage sludges and composts were also evaluated. The sewage sludges were characterised both by differentiated properties and by PAH content. The total PAH content (the sum of 14 PAHs from the EPA List with exception of naphthalene and acenaphthene) in the sludges ranged from 3674 to 11236 microg kg(-1). Four- and three-ring compounds were predominant in the sewage sludges. Almost all of the sludges were characterised by differentiated content levels of both individual PAHs groups and PAHs sum. After 76 days of composting, a significant lowering of the PAH content was observed in all sludges as compared to the beginning of the experiment. The range of total observed PAH losses was from 15.8% to 48.6%, depending on the sewage sludge. The largest lowering of the PAH content was observed in the sludge with the lowest concentration of the xenobiotics studied. The largest losses in individual PAHs were observed in the case of five- and six-rings compounds, and were probably related to strong pollutant binding by other components of the sewage sludge. The few significant relationships showed that PAH losses during composting were only slightly determined by the analysed physical-chemical properties.     

Polybrominated diphenyl ethers and polybrominated biphenyls in Australian sewage sludge

This paper presents a brief review of the international scientific literature of polybrominated diphenyl ethers (PBDEs) and polybrominated biphenyls (PBBs) in sewage sludge and a survey of these compounds in sewage sludge from 16 Australian wastewater treatment plants (WWTPs). The SigmaPBDE mean concentration in the Australian study was 1137microgkg(-1) dry weight (d.w.) (s.d. 1116) and ranged between 5 and 4 230microgkg(-1)d.w. The urban mean of 1308microgkg(-1) (s.d. 1320) and the rural mean of 911microgkg(-1) (s.d. 831) are not statistically different and are similar to levels in European sludges. Principal components analysis was performed on the data set and revealed that 76% of the data variation could be explained by two components that corresponded to overall concentration of the pentaBDE and the decaBDE commercial formulations. An analysis of variance was performed comparing PBDEs levels at three WWTPs over the years 2005 and 2006, finding differences between treatment plants (BDE-47) but no significant difference in PBDE levels in the years 2005 and 2006. Low levels of BB-153 were detected in all samples of this survey (n=16); mean 0.6microgkg(-1)d.w. (s.d. 0.5). This compound has rarely been reported in any other study of sewage sludges undertaken outside Australia. This work highlights the need for a risk assessment of PBDEs in sewage sludge when used for land application, taking into account typical levels found in Australian sludges and soils.     

Ecotoxicity, phytotoxicity and extractability of heavy metals from different stabilised sewage sludges

The presence of heavy metals in the sludges produced in wastewater treatment plants restricts their use for agricultural purposes. This study compares different types of sludges (aerobic, anaerobic, unstabilised and sludge from a waste stabilisation pond) in order to assess the extractability of heavy metals using simple extraction, water and DTPA. The stabilisation treatment undergone by the sludges influenced the heavy metals extractability. The least mineralised sludges (unstabilised and aerobic) showed higher metal extractability. The sewage sludges were subjected to chemical characterisation and toxicity testing (ecotoxicity and phytotoxicity assays) in absence of substrate, to provide a preliminary assessment of their suitability for land application. The ecotoxicity assays confirmed that no sludge constituted a hazardous waste. The sludge extracts had significant adverse effect on the germination index (GI) of barley (Hordeum vulgare L.) and cress (Lepidium sativum L.), a fact which indicates that some characteristics affected root growth.     

A comparative study of anaerobically digested and undigested sewage sludges in preparation of activated carbons.

Disposal of sewage sludge is an increasingly expensive and environmentally sensitive problem throughout the world. Preparation of activated carbon from sewage sludge offers an attractive re-use alternative to the traditional disposal routes. The objective of this research work was to compare anaerobically digested sewage sludge (DS) and undigested sewage sludge (US) as source materials in the preparation of activated carbons. Prior to the preparation the properties of the two types of sewage sludges were determined and compared. Subsequently the sludge samples were activated with 5 M ZnCl2 solution and thereafter pyrolysed at heating temperature of 650 degrees C for 2 h with the heating rate of 15 degrees C/min under a nitrogen atmosphere. The produced activated carbons were characterised by surface area and porosity analysis, CHN elemental composition and ash contents determination, and aqueous phase phenol adsorption tests. The results indicate that in comparison with the DS, the US had a higher carbon content and lower ash content, and accordingly yielded a better activated carbon with a higher BET surface area, pore volume, carbon content and phenol adsorption capacity.     

The total carbohydrate: organic carbon ratio as an indicator of sewage-derived organic matter in Burbo Bight sediments, Liverpool Bay, UK

Sediments from the Burbo Bight, Liverpool Bay, were analysed for their total carbohydrate (TCH) and organic carbon (TOC) contents, and the TCH:TOC ratio (when the TCH is expressed as a percentage of the TOC) was used to give an indication of the amount of sewage-derived organic matter in the sediments. The %TCH values found ranged from 17-68 with an average of 40, indicating that sewage-derived organic matter constituted a significant fraction of the organic matter in the sediment. This appears likely to have been derived mainly from the Mersey Estuary outflow and the sewage sludge dumped in Liverpool Bay, but these two sources cannot be distinguished using this technique. It is suggested that further studies are required on the carbohydrates in sewage sludge and coastal sediments to satisfactorily establish this technique.     

Nitro musks, nitro musk amino metabolites and polycyclic musks in sewage sludges. Quantitative determination by HRGC-ion-trap-MS/MS and mass spectral characterization of the amino metabolites

Nitro- and polycyclic musks were quantified in sewage sludge samples from different catchment areas using high-resolution gas chromatography (HRGC) and ion-trap MS/MS. Collision induced dissociation (CID) turned out to be a useful tool for quantification of the analytes. Negative chemical ionization (NCI) quadrupole MS in the selected ion mode (SIM) showed similar sensitivities compared to ion trap MS/MS. Among the nitro musks, musk ketone (MK) and musk xylene (MX) were the main compounds in predominantly domestic sewage sludges, found at low microgram/kg dry matter (d.m.) whereas polycyclic musks were present in domestic as well as in industrial sludges up to 12 mg/kg d.m. Galaxolide (HHCB) and Tonalide (AHTN) were the major polycyclic musks found in the sludges. Amino metabolites of the nitro musks, amino musk xylene (AMA), amino musk moskene (AMM) and amino musk ketone (AMK) were detected for the first time in sewage sludges, and reached partly higher concentrations compared to the parent compounds.     

Simple and sequential extractions of heavy metals from different sewage sludges

The presence of heavy metals in the sludges produced in waste-water treatment plants restricts their use for agricultural purposes. This study looks at different types of sludges (aerobic, anaerobic, unstabilised and sludge from a waste stabilisation pond) and compares the distribution of the heavy metals they contain according to the treatment that they have undergone. Some agronomic parameters necessary for characterising a sludge as suitable for use as amendment were determined. The aim of this study is to compare the availability and the localisation of heavy metals in different sewage sludges using simple (water and DTPA) extraction and the BCR (Community Bureau of Reference) sequential extraction procedure. It was confirmed that the total concentration of heavy metals did not exceed the limits set out by European legislation and that the stabilisation treatment undergone by the sludges strongly influenced the heavy metal distribution and the phases to which they were associated and their bioavailability level. The DTPA extraction procedure is cheap and easy to perform and the obtained results are similar to those obtained with the sequential procedure.     

Decontamination of polycyclic aromatic hydrocarbons and nonylphenol from sewage sludge using hydroxypropyl-β-cyclodextrin and evaluation of the toxicity of leachates

A decontamination technique based in cyclodextrin extraction has been developed to eliminate nonylphenol (NP) and 16 polycyclic aromatic hydrocarbons (PAHs; the US Environmental Protection Agency priority pollutants list) from sewage sludge. In a first step, PAHs and NP were characterised in six sludges to determine contamination levels according to limit values proposed by the European Union Sludge Directive draft. There were few variations in the total PAHs content with levels of 1.88 to 3.05 mg kg^?1. Three-ring PAHs predominated, but fluoranthene and pyrene were also present. None of the sludge exceeded the PAHs limit proposed by the European Union’s draft Directive. On the contrary, NP content in four of the six sludges was over the recommended limits of 50 mg kg^-1 for NP ethoxylates. With the aim of obtaining NP values below the concentration limits proposed to use the sewage sludge as agricultural amendments, a preliminary study using hydroxypropyl-β-cyclodextrin (HPBCD) extractions as a decontamination technique was carried out. About 90 % of NP content was removed with only one extraction with HPBCD, whereas after three sequential extractions using an aqueous solution without HPBCD, the NP extraction percentage was less than 1 %. Simultaneously, PAHs extraction percentages obtained with HPBCD were also much higher than when aqueous solution was used, especially in the case of two- and three-ring PAHs. Finally, the potential environmental hazard of HPBCD leachates to aquatic organisms (Daphnia magna) was tested. These results indicate that the treatment of sewage sludge with cyclodextrin could allow their safe use as fertiliser in agriculture.     

The influence of sewage sludge applications to agricultural land on human exposure to polychlorinated dibenzo-p-dioxins (PCDDs) and -furans (PCDFs)

Polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) are organic chemicals of suspected extreme toxicity. PCDD/Fs are ubiquitous in the environment and relatively enriched in sewage sludges. The deliberate application of sewage sludge to agricultural land can therefore potentially increase exposure of the human population to these compounds via transfers through the foodchain. This paper presents a protocol for assessing the background human exposure to all seventeen 2,3,7,8-substituted PCDD/Fs for which toxic equivalent factors (TEFs) are available. Background daily human exposure in the UK to 2,3,7,8-T(4)CDD and I-TEQ are calculated to be 0.0239 ng and 0.203 ng, respectively. The potential increases in crop plant and livestock tissue PCDD/F concentrations, and hence in human exposure, following applications of sewage sludge to agricultural land are quantified for different sludge application scenarios. The key role of PCDD/F transfer into livestock via ingestion of sludge adhered to vegetation in determining increases in human exposure is demonstrated.     

Heavy metal speciation and phytotoxic effects of three representative sewage sludges for agricultural uses

The environmental impact of sewage sludges depends on the availability and phytotoxicity of their heavy metal. The influence of representative sludges (dewatered anaerobic, pelletization, and composted sludge) on the availability of heavy metals, and their effects on seed germination were compared. The total heavy metal concentrations were below the maximum permitted for land-applied waste and the differences among them were small. The DTPA-extracted metal concentrations were rather different. The sequential extraction of the compost showed a slight increase in Cd and Cu availability, and a decrease in the availability of Fe, Mn, Ni and Zn. Pelletization increased the availability of Ni and slightly reduced that of Cr. The dewatering sludge led to greater availability of Cr and Mn but reduced the concentration of Cd. The three different sludges also affected seed germination and root elongation in different ways. The most serious adverse effects were caused by the dewatered sludge extract.     

Heavy metal-rich wastes sequester in mineral phases through a glass-ceramic process

Certain sludges generated by industry are rich in contaminating elements and are a major environmental problem. In this study, we determine the ability of these contaminating elements to be incorporated into a glass-matrix and in various mineral phases after a crystallization process. The contaminating elements studied were obtained from sewage sludges (SS) and galvanic sludges (GS), our raw materials. The sludge samples were taken from urban wastewater treatment plant in Catalonia (NE Spain) with high levels of phosphorus oxide (P(2)O(5)). In silica glasses, P(2)O(5) acts as a network former. We determined the chemical composition of both the SS and GS, as well as their thermal behaviour by differential thermal analysis and thermal gravimetric analysis (DTA-TG) to obtain their melting curves. The vitreous transition temperature of the obtained glass was established by dilatometer technique at 725 degrees C. The DTA-TG curve of the glass obtained has an exothermal wide peak at 860 degrees C corresponding to crystallization of the two phases: a spinel phase and a phosphate phase. A second exothermal wide peak at 960 degrees C was attributed to the crystallization of aluminium pyroxene, anorthite and fluor-apatite, with two exothermal phenomena attributed to the evolution of these phases. An exothermal peak at 1100 degrees C was attributed to gehlenite crystallization. Scanning electron microscope observations and energy-dispersed X-ray spectroscopy microanalyses of glass-ceramic showed that the contaminating elements were concentrated in the spinel phases, which are the first phases to crystallize during the cooling of glass. Finally, the spinel structure permits the incorporation of all the contaminating elements into it.     

Comparison of sewage sludge toxicity to plants and invertebrates in three different soils

Understanding the effect of soil type on the overall toxicity of sewage sludge is one of the most important issues concerning environmental risks associated with the sewage sludge land application. The aim of the study was to determine the influence of different soils (sandy, loamy and OECD soil) on sewage sludges toxicity in relation to plants (Lepidium sativum, Sorghum saccharatum, Sinapis alba) and an invertebrate species (Heterocypris incongruens). The most evident negative influence of sewage sludges on root growth was observed in the case of OECD soil. The EC(50) values determined on the basis of the root growth inhibition of all tested plants were in the range 0.1-6.4%, 0.03-9.4% and 6.6-22.1% (% of sewage sludgekg(-1) soil) for OECD, sandy and loamy soil, respectively. Soil type also affects the sewage sludge toxicity in relation to H. incongruens. The LC(50) (mortality) values ranged from 0.26% to 11.5% depending on the sludge tested. For EC(50) (growth inhibition) values ranged from 10.7% to 36.2%.     

Removal of DEHP in composting and aeration of sewage sludge

The potential of composting and aeration to remove bis(2-ethylhexyl) phthalate (DEHP) from municipal sewage sludge was studied with two dewatered sludges: raw sludge and anaerobically digested sludge. Composting removed 58% of the DEHP content of the raw sludge and 34% of that of the anaerobically digested sludge during 85 days stabilisation in compost bins. A similar removal for the anaerobically digested sludge was achieved in a rotary drum in 28 days. Less than 1% of DEHP was removed with the compost leachate. Although DEHP removal was greater from raw sludge compost than anaerobically digested sludge compost, the total and volatile solids removals were on the same level in the two composts. In the aeration of raw sludge at 20 degrees C the DEHP removals were 33-41% and 50-62% in 7 and 28 days, respectively. Both composting and aeration are concluded to have the potential to reduce the DEHP contents typically found in sewage sludges to levels acceptable for agricultural use.     

Organic carbon concentration profiles in recent cave sediments: records of agricultural pollution or diagenesis?

Recent (<7 years old) cave sediments in Speedwell Cavern, Derbyshire, show an approximately exponential decay of organic carbon with depth. This phenomenon was thought to be due to one of two causes: (i) changing agricultural practice within the catchment feeding the cave, especially the increased use of sewage sludge and animal slurry as fertilizer; (ii) a relatively constant organic carbon concentration over time in the input sediment, with subsequent carbon mineralization during diagenesis. Carbon isotope composition of the organic material and the evolution of H/C ratio with depth indicate that the latter hypothesis is correct and that the profiles result from microbial diagenesis, not increased organic carbon inputs. By comparison with sediment of known (7 years) age, temporal decay constants for organic matter can be derived; these lie between rates previously determined for organic matter decomposition in marine sediments and soils. The H/C ratio of organic matter can be modelled as a function of time and proceeds in a similar fashion to soil organic material.