Microplastic sources,formation, toxicity and remediation: a review

Microplastic pollution is becoming a major issue for human health due to the recent discovery of microplastics in most ecosystems. Here, we review the sources, formation, occurrence, toxicity and remediation methods of microplastics. We distinguish ocean-based and land-based sources of microplastics. Microplastics have been found in biological samples such as faeces, sputum, saliva, blood and placenta. Cancer, intestinal, pulmonary, cardiovascular, infectious and inflammatory diseases are induced or mediated by microplastics. Microplastic exposure during pregnancy and maternal period is also discussed. Remediation methods include coagulation, membrane bioreactors, sand filtration, adsorption, photocatalytic degradation, electrocoagulation and magnetic separation. Control strategies comprise reducing plastic usage, behavioural change, and using biodegradable plastics. Global plastic production has risen dramatically over the past 70 years to reach 359 million tonnes. China is the world's top producer, contributing 17.5% to global production, while Turkey generates the most plastic waste in the Mediterranean region, at 144 tonnes per day. Microplastics comprise 75% of marine waste, with land-based sources responsible for 80–90% of pollution, while ocean-based sources account for only 10–20%. Microplastics induce toxic effects on humans and animals, such as cytotoxicity, immune response, oxidative stress, barrier attributes, and genotoxicity, even at minimal dosages of 10 μg/mL. Ingestion of microplastics by marine animals results in alterations in gastrointestinal tract physiology, immune system depression, oxidative stress, cytotoxicity, differential gene expression, and growth inhibition. Furthermore, bioaccumulation of microplastics in the tissues of aquatic organisms can have adverse effects on the aquatic ecosystem, with potential transmission of microplastics to humans and birds. Changing individual behaviours and governmental actions, such as implementing bans, taxes, or pricing on plastic carrier bags, has significantly reduced plastic consumption to 8–85% in various countries worldwide. The microplastic minimisation approach follows an upside-down pyramid, starting with prevention, followed by reducing, reusing, recycling, recovering, and ending with disposal as the least preferable option.

     

Enhanced desorption of fluoxetine from polyethylene terephthalate microplastics in gastric fluid and sea water

There are concerns that microplastics act as a vector of pharmaceuticals in the aquatic environment. Most studies have focussed on pharmaceutical adsorption and have not investigated desorption in the various matrices that microplastics enter. Therefore we studied the desorption of the antidepressant drug fluoxetine from polyethylene terephthalate (PET) microplastics in river water, sea water, and simulated gastric and intestinal fluids. We found that most desorption occurred rapidly, within a few hours of exposure. Fluoxetine desorption fitted well to the Freundlich isotherm with r² values ranging from 0.97 to 0.99. Desorption decreased in the following order: gastric fluid at 20 °C and 37 °C; sea water at 20 °C; intestinal fluid at 20 °C and 37 °C; then river water at 20 °C. The little difference in desorption in gastrointestinal fluids at 20 °C and 37 °C suggests a similar exposure risk to cold- and warm-blooded organisms following PET microplastic ingestion. Total desorption following sequential incubation 2 h in gastric fluid then 4 h in intestinal fluid to mimic gastrointestinal digestion was 37% at 20 °C and 41% at 37 °C. Interestingly, higher desorption of 18–23% occurred in sea water compared to river water, of 4–11%. Under a worst-case scenario, more than 44 mg kg⁻¹ body weight d⁻¹ or more than 52 mg kg⁻¹ body weight d⁻¹ of PET microplastics from river water or sea water, respectively, need to be consumed to exceed the mammalian acceptable daily intake for fluoxetine. Further studies are needed on microplastic ingestion and the bioavailability of adsorbed pharmaceuticals to a range of exposed aquatic organisms.

     

Microplastics in mangroves and coral reef ecosystems: a review

Microplastic pollution has recently been identified as a major issue for the health of ecosystems. Microplastics have typically sizes of less than 5 mm and occur in various forms, such as pellets, fibres, fragments, films, and granules. Mangroves and coral reefs are sensitive and restricted ecosystems that provide free ecological services such as coastal protection, maintaining natural cycles, hotspots of biodiversity and economically valuable goods. However, urbanization and industrial activities have started contaminating even these preserved ecosystems. Here we review sources, occurrence, and toxicity of microplastics in the trophic levels of mangrove and coral reef ecosystems. We present detection methods, such as microscopic identification and spectroscopy. We discuss mitigating measures that prevent the entry of microplastics into the marine environment.

     

Microplastics pollution and reduction strategies

Microplastic particles smaller than 5 mm in size are of increasing concern, especially in aquatic environments, such as the ocean. Primary source is microbeads (<1 mm) used in cosmetics and cleaning agents and fiber fragments from washing of clothes, and secondary source such as broken down plastic litter and debris. These particles are mostly made from polyethylene (PE), polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) and polyesters. They are ingested by diverse marine fauna, including zooplanktons, mussel, oyster, shrimp, fish etc. and can enter human food chains via several pathways. Strategy for control of microplastics pollution should primarily focus on source reduction and subsequently on the development of cost-effective clean up and remediation technologies. Recent research results on biodegradation of plastics have revealed a potential for microbial biodegradation and bioremediation of plastic pollutants, such as PE, PS and PET under appropriate conditions.     

海洋中微塑料的环境行为和生态影响

微塑料一般指直径小于5 mm的微小型塑料颗粒或碎片，海洋中常见的微塑料类型主要包括聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯等。由于形状、颜色多变，分子量大，结构稳定，粒径范围与浮游植物相近，海洋中的微塑料很容易被对浮游植物、浮游动物和其他海洋动物等产生影响。微塑料还可以为病毒、细菌提供附着载体，影响浮游植物分布，进入海洋生物消化道或进一步转移到组织中对机体产生毒性效应，甚至通过捕食作用沿食物链传递，对高等动物及人类健康造成威胁。此外，微塑料可以作为海水中痕量化学物质的吸附载体，对生物产生联合毒性。根据目前对微塑料的研究进展情况，未来应加强对海洋微塑料分离、鉴定技术的研发以及海洋微塑料的生物毒性效应和生物传递效应机制等问题的研究。     

Microplastic contamination in Great Lakes fish

Freshwater ecosystems, generally adjacent to human population and more contaminated relative to adjacent marine ecosystems, are vulnerable to microplastic contamination. We sampled 7 species of fish from Lake Ontario and Lake Superior and assessed their gastrointestinal (GI) tracts to quantify ingested microplastics and other anthropogenic particles. A subset of the microparticles were chemically analyzed to confirm polymer types and anthropogenic origins. We documented the highest concentration of microplastics and other anthropogenic microparticles ever reported in bony fish. We found 12,442 anthropogenic microparticles across 212 fish (8 species) from nearshore Lake Ontario, 943 across 50 fish (1 species) from Humber River, and 3094 across 119 fish (7 species) from Lake Superior. Fish from Lake Ontario had the greatest mean abundance of anthropogenic microparticles in their GI tracts (59 particles/fish [SD 104]), with up to 915 microparticles in a single fish. Fish from Lake Superior contained a mean [SD] of 26 [74] particles/fish, and fish from Humber River contained 19 [14] particles/fish. Most particles were microfibers. Overall, ≥90% of particles were anthropogenic, of which 35-59% were microplastics. Polyethylene (24%), polyethylene terephthalate (20%), and polypropylene (18%) were the most common microplastics. Ingestion of anthropogenic particles was significantly different among species within Lake Ontario (p < 0.05), and the abundance of anthropogenic particles increased as fish length increased in Lake Ontario (ρ = 0.62). Although we cannot extrapolate the concentration of microplastics in the water and sediments of these fish, the relatively high abundance of microplastics in the GI tracts of fish suggests environmental exposure may be above threshold concentrations for risk.     

Analysis of a two-layer cloud system with RAMS model and comparison to airborne observations

A three-dimensional numerical model (Regional Atmospheric Modeling System—-RAMS) was used to study the formation and evolution of water forms in a two-layer cloud structure observed during a field campaign over Brest (France). The model performance in regular operations, using conventional meteorological data as initial and lateral boundary conditions, was also examined. Remote sensing observations of the cloud system and in-situ aircraft data, selected during the campaign, were used to validate the model outputs. The model simulations showed that the lower cloud formation was characterized by high number concentration of pristine ice and snow, while the concentration of aggregates, graupel and hail were considerably lower. Hydrometeors in liquid phase appeared demonstrating high number concentration and water content on the top of this layer. The upper cloud layer consisted only of frozen water substances in lower amounts. The qualitative and quantitative comparison of the model-calculated meteorological and microphysical fields to the available observational data revealed that the model reflected fairly well the cloud structure (e.g., the spatio-temporal variability of the cloud parameters, the geometry of the cloud system). However, there were deviations as far as the model underestimating the ice water content (IWC) and number concentration (N_t) fields is concerned, especially at the atmospheric layer between 2.5 and 4 km of altitude. These deviations of the model simulated quantities from the measured ones may be attributed either to the performance of the model’s microphysics scheme, to instrument inaccuracies and to the local disturbance caused by the aircraft.     

几类有机污染物的微塑料/水分配系数的线性溶解能关系模型

水体中的微塑料会吸附其中的有机污染物,影响有机污染物和微塑料的环境归趋和生态毒性。研究微塑料对有机污染物的吸附行为,对于评价有机污染物和微塑料的环境赋存、迁移及生物有效性有重要意义。污染物在微塑料与水之间的平衡分配系数(Kd),是表征微塑料对有机污染物吸附能力的重要参数。实验方法难以逐个测定众多有机污染物的Kd值,有必要发展其预测模型。本研究搜集了有机污染物的线性溶解能关系(LSER)参数及Kd值,构建了可预测有机污染物在聚丙烯微塑料与海水、聚乙烯微塑料与海水、聚乙烯微塑料与淡水之间Kd值的LSER模型。模型具有良好的拟合优度(R2adj介于0.794~0.903)、稳健性(Q2LOO和Q2BOOT分别介于0.763~0.863和0.720~0.804)和预测能力(R2ext和Q2ext分别介于0.886~0.971和0.825~0.954),能够用于预测多氯联苯、多环芳烃、六氯环已烷和氯苯类有机污染物的Kd值。     

The abundance,characteristics and diversity of microplastics in the South China Sea: Observation around three remote islands

• A high abundance of floating MPs was found in the southern South China Sea. • Transparent film and fiber were predominant in water and organisms, respectively. • 84.7% of floating MPs and 54.5% of MPs in vivo belonged to PP and PE. • Characteristics of MP in organisms were different from those of inshore ones. Surrounded by emerging markets with considerable plastic consumption, the South China Sea has been a focus area of microplastic research. A survey on the floating microplastics (>0.3 mm) and microplastics ingested by fish and mollusks was conducted around three remote islands here. Compared with the results from several previous studies, a high abundance of floating microplastics (with a median of 1.9 × 10⁵ items/km² or 0.7 items/m³) was observed, revealing another “hot spot” for microplastics. Polyolefin, especially polypropylene, was the main component. The diversity index and evenness index were calculated and evaluated based on the composition of microplastics. The characteristic peaks of Raman spectra concerning pigmented microplastics were provided. Transparent sheets/films were predominant in the water sample, which was quite different from a similar study in this sea area (8.9% for film), and only 16.4% of floating microplastics (>0.3 mm) were fibers/lines, implying that the main sources of floating microplastics (>0.3 mm) might be household/agricultural consumption activities. The transparent fiber/line was also dominant in organisms. It is suggested that the main sources of microplastics ingested by organisms might be both fabric fibers and fishing/aquaculture.     

Synthesis and potential applications of cyclodextrin-based metal–organic frameworks: a review

Metal–organic frameworks are porous polymeric materials formed by linking metal ions with organic bridging ligands. Metal–organic frameworks are used as sensors, catalysts for organic transformations, biomass conversion, photovoltaics, electrochemical applications, gas storage and separation, and photocatalysis. Nonetheless, many actual metal–organic frameworks present limitations such as toxicity of preparation reagents and components, which make frameworks unusable for food and pharmaceutical applications. Here, we review the structure, synthesis and properties of cyclodextrin-based metal–organic frameworks that could be used in bioapplications. Synthetic methods include vapor diffusion, microwave-assisted, hydro/solvothermal, and ultrasound techniques. The vapor diffusion method can produce cyclodextrin-based metal–organic framework crystals with particle sizes ranging from 200 nm to 400 μm. Applications comprise food packaging, drug delivery, sensors, adsorbents, gas separation, and membranes. Cyclodextrin-based metal–organic frameworks showed loading efficacy of the bioactive compounds ranging from 3.29 to 97.80%.

     

Polylactic acid synthesis,biodegradability, conversion to microplastics and toxicity: a review

Global pollution by plastics derived from petroleum has fostered the development of carbon–neutral, biodegradable bioplastics synthesized from renewable resources such as modern biomass, yet knowledge on the impact of bioplastics on ecosystems is limited. Here we review the polylactic acid plastic with focus on synthesis, biodegradability tuning, environmental conversion to microplastics, and impact on microbes, algae, phytoplankton, zooplankton, annelids, mollusk and fish. Polylactic acid is a low weight semi-crystalline bioplastic used in agriculture, medicine, packaging and textile. Polylactic acid is one of the most widely used biopolymers, accounting for 33% of all bioplastics produced in 2021. Although biodegradable in vivo, polylactic acid is not completely degradable under natural environmental conditions, notably under aquatic conditions. Polylactic acid disintegrates into microplastics faster than petroleum-based plastics and may pose severe threats to the exposed biota.

     

Microplastics in municipal wastewater treatment plants: a case study of Denizli/Turkey

● High amounts of microplastics are released to receiving media from WWTPs. ● The effect of classical treatment processes on MP removal is important. ● MP load in the effluent of WWTPs is important for developing treatment technology. ● Additional physical treatment could help further reduce MP discharge. Plastic particles smaller than 5 mm are microplastics. They are among the significant pollutants that recently attracted attention. Great quantities of microplastics enter the sewage system daily and reach wastewater treatment plants (WWTPs). As a result, WWTPs are potential microplastic sources. Hence, they create a pathway for microplastics to reach aquatic environments with treated wastewater discharge. Studies on microplastic characterization in WWTPs have gained momentum in academia. This study investigates the abundance, size, shape, color, polymer type, and removal efficiencies of microplastics in a municipal wastewater treatment plant (WWTP) in Denizli/Turkey. The results showed that the dominant microplastic shape in wastewater samples was fibers (41.78%–60.77%) in the 100–500 µm (58.57%–80.07%) size range. Most of the microplastics were transparent-white (32.86%–58.93%). The dominant polymer types were polyethylene (54.05%) and polyethylene vinyl acetate (37.84%) in raw wastewater. Furthermore, the microplastic removal efficiencies of the Denizli Central WWTP as a whole and for individual treatment units were evaluated. Although the microplastic pollution removal efficiency of the Denizli Central WWTP was over 95%, the microplastic concentration discharged daily into the receiving environment was considerably high (1.28 × 10¹⁰ MP/d). Thus, Denizli Central WWTP effluents result in a high volume of emissions in terms of microplastic pollution with a significant daily discharge to the Çürüksu Stream.     

Trans-Sahara migrants select flight altitudes to minimize energy costs rather than water loss

Meteorological conditions influence strongly the energy and water budget of birds. By adjusting their flights spatially and temporally with respect to these conditions, birds can reduce their energy expenditure and water loss considerably. By radar, we quantified songbird migration across the western Sahara in spring and autumn. There autumn migrants face the trade-off between (a) favorable winds combined with hot and dry air at low altitudes and (b) unfavorable winds combined with humid and cold air higher up. Thus, it can be tested whether birds may chose altitudes to minimize water loss instead of energy expenditure. We predicted optimal flight altitudes with respect to water loss and energy expenditure based on a physiological flight model when crossing the western Sahara and compared these model predictions spatially and temporally with measured songbird densities. The model aiming for minimal water consumption predicted a mean flight altitude of 3,400 m under autumn conditions. However, 64% of the nocturnal songbird migration flew at altitudes below 1,000 m above ground level profiting from tailwind. This preference for tailwind in autumn, despite the hot and dry air, emphasizes the importance of energy savings and diminishes the significance of possible water stress for the selection of flight altitude. Nevertheless, during daytime, high energy expenditure due to air turbulences and water loss due to warmer air and direct solar radiation prevent songbirds from prolonging their nocturnal flights regularly into the day. Birds crossing the Sahara save water by nocturnal flights and diurnal rests.     

Fate of microplastics in a coastal wastewater treatment plant: Microfibers could partially break through the integrated membrane system

• Fate of microplastics in integrated membrane system for water reuse was investigated. • Integrated membrane system has high removal efficiency (>98%) for microplastics. • Microplastics (>93%) were mainly removed through membrane bioreactor treatment. • Small scale fiber plastics (<200 μm) could break through reverse osmosis (RO) system. • The flux of microplastics maintained at 2.7 × 10¹¹ MPs/d after the RO treatment. Rare information on the fate of microplastics in the integrated membrane system (IMS) system in full-scale wastewater treatment plant was available. The fate of microplastics in IMS in a coastal reclaimed water plant was investigated. The removal rate of microplastics in the IMS system reached 93.2% after membrane bioreactor (MBR) treatment while that further increased to 98.0% after the reverse osmosis (RO) membrane process. The flux of microplastics in MBR effluent was reduced from 1.5 × 10¹³ MPs/d to 10.2 × 10¹¹ MPs/d while that of the RO treatment decreased to 2.7 × 10¹¹ MPs/d. Small scale fiber plastics (<200 μm) could break through RO system according to the size distribution analysis. The application of the IMS system in the reclaimed water plant could prevent most of the microplastics from being discharged in the coastal water. These findings suggested that the IMS system was more efficient than conventional activated sludge system (CAS) for the removal of microplastics, while the discharge of small scale fiber plastics through the IMS system should also not be neglected because small scale fiber plastics (<200 μm) could break through IMS system equipped with the RO system.     

Microplastics pollution in Bangladesh: current scenario and future research perspective

ABSTRACT

Microplastics are emerging environmental pollutants that have gained tremendous scientific interest in recent years. These micropollutants are omnipresent both in the terrestrial and aquatic environments posing a deleterious threat to the ecosystem and biodiversity. So, it is important to develop a deep understanding of the environmental fate and potential adverse impacts of microplastics on the aquatic and terrestrial environments. By critically reviewing the previously published scientific literature, the present synthesis briefly outlines the characteristics, occurrence and potential toxic effects of microplastics on terrestrial and aquatic biota. The article also focuses on some innovative approaches for sustainable remediation of macroplastics as well as microplastics. Since the concept of microplastics pollution has yet in its infancy in Bangladesh, this synthesis provides an overview of the current scenario of microplastics pollution and some future research recommendations in the context of Bangladesh which might be helpful to the novice researchers of this field.     

The origin of high hydrocarbon groundwater in shallow Triassic aquifer in Northwest Guizhou,China

Original high hydrocarbon groundwater represents a kind of groundwater in which hydrocarbon concentration exceeds 0.05 mg/L. The original high hydrocarbon will significantly reduce the environment capacity of hydrocarbon and lead environmental problems. For the past 5 years, we have carried out for a long-term monitoring of groundwater in shallow Triassic aquifer in Northwest Guizhou, China. We found the concentration of petroleum hydrocarbon was always above 0.05 mg/L. The low-level anthropogenic contamination cannot produce high hydrocarbon groundwater in the area. By using hydrocarbon potential, geochemistry and biomarker characteristic in rocks and shallow groundwater, we carried out a comprehensive study in Dalongjing (DLJ) groundwater system to determine the hydrocarbon source. We found a simplex hydrogeology setting, high-level water–rock–hydrocarbon interaction and obviously original hydrocarbon groundwater in DLJ system. The concentration of petroleum hydrocarbon in shallow aquifer was found to increase with the strong water–rock interaction. Higher hydrocarbon potential was found in the upper of Guanling formation (T₂g³) and upper of Yongningzhen formation (T₁yn⁴). Heavily saturated carbon was observed from shallow groundwater, which presented similar distribution to those from rocks, especially from the deeper groundwater. These results indicated that the high concentrations of original hydrocarbon in groundwater could be due to the hydrocarbon release from corrosion and extraction out of strata over time.

     

海洋中微塑料的环境行为和生态影响

微塑料一般指直径小于5 mm的微小型塑料颗粒或碎片,海洋中常见的微塑料类型主要包括聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯等。由于形状、颜色多变,分子量大,结构稳定,粒径范围与浮游植物相近,海洋中的微塑料很容易对浮游植物、浮游动物和其他海洋动物等产生影响。微塑料还可以为病毒、细菌提供附着载体,影响浮游植物分布,进入海洋生物消化道或进一步转移到组织中对机体产生毒性效应,甚至通过捕食作用沿食物链传递,对高等动物及人类健康造成威胁。此外,微塑料可以作为海水中痕量化学物质的吸附载体,对生物产生联合毒性。根据目前对微塑料的研究进展情况,未来应加强对海洋微塑料分离、鉴定技术的研发以及海洋微塑料的生物毒性效应和生物传递效应机制等问题的研究。     

Biofuel production,hydrogen production and water remediation by photocatalysis,biocatalysis and electrocatalysis

The energy crisis and environmental pollution have recently fostered research on efficient methods such as environmental catalysis to produce biofuel and to clean water. Environmental catalysis refers to green catalysts used to breakdown pollutants or produce chemicals without generating undesirable by-products. For example, catalysts derived from waste or inexpensive materials are promising for the circular economy. Here we review environmental photocatalysis, biocatalysis, and electrocatalysis, with focus on catalyst synthesis, structure, and applications. Common catalysts include biomass-derived materials, metal–organic frameworks, non-noble metals nanoparticles, nanocomposites and enzymes. Structure characterization is done by Brunauer–Emmett–Teller isotherm, thermogravimetry, X-ray diffraction and photoelectron spectroscopy. We found that water pollutants can be degraded with an efficiency ranging from 71.7 to 100%, notably by heterogeneous Fenton catalysis. Photocatalysis produced dihydrogen (H₂) with generation rate higher than 100 μmol h⁻¹. Dihydrogen yields ranged from 27 to 88% by methane cracking. Biodiesel production reached 48.6 to 99%.

     

Correlation of cadmium and aluminum in blood samples of kidney disorder patients with drinking water and tobacco smoking: related health risk

The combined exposure to aluminum (Al) and cadmium (Cd) causes more pronounced adverse health effects on humans. The kidneys are the main organs affected by internal exposure to Cd and Al via food and non-food items. The objective of present study was to measure the Al and Cd concentrations in cigarettes tobacco (branded and non-branded) and drinking water (domestic treated, ground and lake water) samples in southern part of Pakistan, to assess the risk due to ingestion of water and inhalation of cigarettes smoke containing high concentrations of both elements. The study population (kidney disorder and healthy) divided into two group based on consuming lake and ground water, while smoking non-branded cigarette as exposed, while drinking domestic treated water and smoking branded cigarette as non-exposed. Electrothermal atomic absorption spectrometry was used to determined Cd and Al concentrations in tobacco, drinking water and blood samples. The resulted data indicated that the levels of Al and Cd in lake and underground water were higher than the permissible limit in drinking water recommended by the World Health Organization. The biochemical parameters of exposed and referent patients, especially urinary N-acetyl-h-glucosaminidase, were used as a biomarkers of kidney disorder. Exposed kidney disorder patients have higher levels of Cd and Al than the exposed referents subjects, while difference was significant when compared to resulted data of non-exposed patients and referents (p = 0.01–0.001). The pearson correlation showed positive correlation between both toxic element concentrations in water, cigarettes versus blood samples of exposed subjects (r = 0.20–0.67 and 0.71–0.82), while lower values were observed for non-exposed subjects (r = 0.123–0.423 and 0.331–0.425), respectively.

     

Chemistry,abundance, detection and treatment of per- and polyfluoroalkyl substances in water: a review

Per- and polyfluoroalkyl substances (PFAS) encompass a wide range of compounds containing carbon–fluorine bonds. Due the strength of this bond and the high electronegativity of fluorine atoms, PFAS display stability, wettability and other characteristics that are unique for industrial applications and products. However, PFAS induce adverse effects on the environment and human health. Here we review the chemistry, synthesis, properties, analysis, occurrence in water, filtration, removal and oxydation of PFAS.  We highlight emerging hybrid treatments to remove PFAS from water.