气田增压机组烟气余热利用技术

综述国内外烟气余热利用技术的研究及应用现状,主要包括热能直接回收、吸收式制冷、有机朗肯循环和温差发电等方式。结合气田开采实际,分析讨论各类余热利用技术在气田增压机组烟气余热利用中的应用潜力和发展方向。在选择余热利用方案时,应结合气田增压机组现有条件、机组性能以及运行模式等因素进行综合评估。     

炼化企业低温余热利用技术探讨＊

目前炼化企业有大量的低温余热需要回收,了解低温余热的来源、回收途径和技术,对提高低温余热利用效率十分重要。文章对炼厂低温余热的主要来源、利用途径和技术进行综合分析,提出炼厂低温余热回收利用的一些建议。     

注汽锅炉烟气余热利用技术应用

通过对注汽锅炉烟气余热利用潜力分析和开展余热利用方式对比分析,采用了在对流段安装热管换热器,通过换热器将烟气余热与助燃空气换热,余热利用技术的现场应用,实现了注汽锅炉燃料单耗降低的目的,取得良好的节能效果。     

油田注汽锅炉烟气余热利用与低碳减排

通过对注汽锅炉烟气余热利用潜力的分析及开展余热利用方式对比分析,采用在注汽锅炉对流段上安装热管换热器,使高温烟气与助燃空气换热,利用换热器回收烟气余热。该技术的现场应用,实现了注汽锅炉燃料单耗降低和污染物排放量降低的目的,取得了良好的节能、减排效果。     

Waste‐to‐energy recovery potential: A case study at Jaipur railway station

A study was conducted at the Jaipur railway station in Jaipur, India, to give the perspectives of the actual waste management practices there. Required information was collected from the stakeholders by means of semi‐structured questionnaires, individual and group interviews, and recorded, official data regarding waste generation, collection, transportation, and disposal. Further quantitative and compositional analyses were performed by means of surveys and measurements. Field visits were made for collection of waste samples for quantification and for the study of its management. The field data were compiled and analyzed by sorting the waste into different components. It was found that 1.8 tons of solid waste is collected per day, and a considerable percentage of it comprises paper, plastic, and glass. Excluding the inerts, which are irrelevant from the point of view of energy saving and recovery potential, the average moisture content was found to be 3.38%. From the perspective of life cycle analysis, the option of composting or recycling would give savings of 28.33 gigajoules (GJ) per day over landfilling, while combustion would give savings of 2.97 GJ per day in comparison to landfilling. Analysis based on a compositional model gives a heat value of 8,157.87 kilojoules per kilogram, which amounts to 14.68 GJ of energy per day.     

Thermal analysis of tilted wick solar distillation-cum-drying system

The performance of the designed tilted wick solar water distillation-cum-drying unit has been tested at water flow rates of 50 and 65 ml/min in the distillation unit. Effect of water flow rates on the heat transfer coefficients of distillation and drying unit for drying ginger has been evaluated. The energy and exergy efficiency of the distillation system have also been evaluated. Average distillates of 2.36 and 2.2 l/m² were collected from the tilted wick solar still at flow rates of 50 and 65 ml/min, respectively. Large variation in convective and evaporative heat transfer coefficients of distillation unit has been observed at given water flow rates. Water flow rate in the distillation unit significantly affects the performance of the drying unit. Average convective heat transfer coefficients of 6.56 and 3.75 W/m^{2 o}C have been observed for drying ginger at flow rates of 50 and 65 ml/min, respectively. Energy and exergy efficiency of the distillation unit have been found to be nearly 19% and 0.9%, respectively. Experimental uncertainty has also been evaluated for distillation and drying units. The distillate cost for the developed distillation-cum-drying unit is calculated as $0.03729/l along with dried ginger of about 2.5 kg/m²/day.     

Assessment of the greenhouse effect impact of technologies used for energy recovery from municipal waste: A case for England

Waste management activities contribute to global greenhouse gas emissions approximately by 4%. In particular the disposal of waste in landfills generates methane that has high global warming potential. Effective mitigation of greenhouse gas emissions is important and could provide environmental benefits and sustainable development, as well as reduce adverse impacts on public health. The European and UK waste policy force sustainable waste management and especially diversion from landfill, through reduction, reuse, recycling and composting, and recovery of value from waste. Energy from waste is a waste management option that could provide diversion from landfill and at the same time save a significant amount of greenhouse gas emissions, since it recovers energy from waste which usually replaces an equivalent amount of energy generated from fossil fuels. Energy from waste is a wide definition and includes technologies such as incineration of waste with energy recovery, or combustion of waste-derived fuels for energy production or advanced thermal treatment of waste with technologies such as gasification and pyrolysis, with energy recovery. The present study assessed the greenhouse gas emission impacts of three technologies that could be used for the treatment of Municipal Solid Waste in order to recover energy from it. These technologies are Mass Burn Incineration with energy recovery, Mechanical Biological Treatment via bio-drying and Mechanical Heat Treatment, which is a relatively new and uninvestigated method, compared to the other two. Mechanical Biological Treatment and Mechanical Heat Treatment can turn Municipal Solid Waste into Solid Recovered Fuel that could be combusted for energy production or replace other fuels in various industrial processes. The analysis showed that performance of these two technologies depends strongly on the final use of the produced fuel and they could produce GHG emissions savings only when there is end market for the fuel. On the other hand Mass Burn Incineration generates greenhouse gas emission savings when it recovers electricity and heat. Moreover the study found that the expected increase on the amount of Municipal Solid Waste treated for energy recovery in England by 2020 could save greenhouse gas emission, if certain Energy from Waste technologies would be applied, under certain conditions.     

A CLOSED WATER REUSE SYSTEM FOR POWER PLANT COOLING AND DIGESTER HEATING1

ABSTRACT: A model consisting of closed water reuse and productive use of various types of wastes for energy generation is presented. The sewage after treatment would be used as the cooling water for power plants, and the condenser discharge therefrom be used as heating water for sludge digesters. The water is then purified for municipal water supply for continuous use. The advantages of this system are that water resources and energy are conserved while various types of wastes including waste heat are controlled. With a preliminary system analysis, it appears that the design for power plant based on the total heating value of wastes and digester capacity based on sewage sludge generation is feasible in terms of acquisition and full utilization of various types of wastes as generated in a single metropolitan area. The system as shown in this design is in balance among various factors such as the generation rate of municipal refuse, municipal sewage, waste heat in the condenser discharge, and raw sewage sludge.     

Adsorptive cooling: a clean technology

As a consequence of the Kyoto Protocol and its predecessor, the Montreal Protocol, environmental considerations will play an important role in the choice of a refrigeration or heat pump system. Accordingly, sorption technology is expected to develop for cooling as well as for heat pump applications because it uses benign fluids. At the moment, liquid absorption technology is the leading technology in that field; however, adsorption offers advantages that cannot be achieved by liquid absorption technology. This article addresses the measures to reduce halocarbon emissions and the possibilities of adsorption technology. Not only are the direct emissions taken into account but also the indirect ones due to energy consumption. Several cases that show that adsorption cooling is very promising, from the global warming point of view, are considered in this article. They are: waste heat adsorption chilling, natural gas adsorption chilling, trigeneration and natural gas reversible heat pump. Adsorption air conditioning for automobiles is also discussed as a very challenging possibility for adsorption cooling.     

燃煤锅炉低温烟气余热利用探讨

针对燃煤锅炉燃烧产生的低温烟气仍具有一定温度的现象,提出通过增设超导热管空气预热器对这部分低温烟气余热加以回收的设想,对锅炉送风进行预热,探讨烟气余热利用可达到的送风温度、节能效果及可能产生的经济效益。     

余热锅炉在绿色油田建设中的应用

余热锅炉的运用使得不同品级的能源可以得到充分合理的利用。中国石油塔里木油田公司在生产实践中,采用燃气发电机组—余热锅炉联合循环技术,用不能再发电的燃气尾气生产蒸汽,对天然气中蕴含的能量进行分级利用,实现了发电、供热双重效益,也降低了对周边环境的热污染。文章对该热电联合循环的工艺流程进行介绍,通过对燃气发电机组尾气的能量传递进行计算,用热力学原理进行分析,以期实现对使用余热锅炉后的热电联产经济性进行综合评价的目的。     

A numerical model for drying of spherical object in an indirect type solar dryer and estimating the drying time at different moisture level and air temperature

A numerical model for simultaneous heat and mass transfer was developed for solar drying of spherical objects and the object considered is green peas. Solar collector outlet temperature is assumed as drying chamber temperature and justified through energy balance equations. Assumptions are imposed on heat and mass transfer governing equations without losing the physics of the problem. Discretization is performed by finite difference method with implicit scheme. To generalize, the governing equation and boundary conditions are non-dimensionalized. The set of finite difference equations was solved by Tridiagonal Matrix Algorithm and a computer code in MATLAB was developed to solve them. The drying curves showed two stages of drying, initial, and secondary drying stage. At all drying temperatures and drying time, the center moisture was maximum and it was minimum at the boundary. A percentage of 85.67 surface moisture content and 25.33% center moisture was eliminated in the first 1 hr at 348 K. The product should be dried up to 7.45, 4.74, and 3.74 hr at air drying temperatures of 318, 333, and 348 K respectively, to maintain 10% of the product’s initial moisture content. The result is compared with the experimental result from literature and they are found to be in good agreement.     

Grey relational analysis of an integrated cascade utilization system of geothermal water

With the drastic decrease in fossil resources and rapid deterioration of the global environment, the utilization of geothermal resources has been strongly advocated. The combination of heat, power, and cold utility generation is commonly used to increase the utilization efficiency of geothermal resources. In this study, an integrated cascade utilization system of waste geothermal water (ICUWGW) from a flash geothermal power plant in China is established to increase the utilization efficiency of geothermal water. The waste geothermal water leaving the power plant is proposed for further use in cascade for two-stage LiBr/H₂O absorption cooling, agricultural product drying, and residential bathing. Twelve candidate temperature schemes showing different inlet and outlet temperatures of every subsystem are proposed for the ICUWGW. Several criteria are selected for the evaluation and screening of the candidate schemes. Grey relational analysis incorporating analytic hierarchy process is conducted to screen the optimal temperature scheme for the ICUWGW to meet the comprehensive criteria of thermodynamics and economics. Results show that the optimal scheme features significant improvement in energy efficiency, exergy efficiency, and equivalent electricity generation efficiency compared with those of the current geothermal power plant. The investment payback time of the additional subsystems for cooling, drying, and bathing is 1.85 years. Exergy analysis is also conducted to determine the further optimization potential of the optimal ICUWGW. Sensitivity analysis of electricity price on the performance of the optimal ICUWGW is also performed.     

Effects of planned expansion of waste incineration in the Swedish district heating systems

Recent targets for reduced amounts of waste to landfills in Sweden will result in a large increase in waste incineration with recovery of energy, used primarily for district heating. The aim of this study is to investigate what changes in the usage of other fuels and technologies for district heat production would be caused by this increase. A questionnaire was sent out to the largest district heating companies, and simulations in an energy systems model were carried out. The analysis shows that increased waste incineration reduces the demand for other fuels, especially biomass, for district heat production. The effects include reductions in operating hours as well as the avoidance or postponement of investments in new plants for district heat production. Increased waste incineration will also lead to a greater use of district heating in Sweden.     

Municipal solid waste management in South Africa: from waste to energy recovery through waste-to-energy technologies in Johannesburg

ABSTRACT

“Waste-to-energy” (WTE) technologies have been presented as one of the avenues to improve the management of solid waste whilst promoting clean and healthy urban environments through the recovery of waste and generation of energy. Research suggests that with the right investment in technologies and institutional changes, waste can potentially become a resource that can contribute to the socio-economic development of cities. It is in this context that this paper presents a review of the literature on WTE technologies and their implications on sustainable waste management in urban areas. The paper particularly contributes to our understanding of WTE technologies and its potential on Municipal Solid Waste Management (MSWM) in Johannesburg, South Africa. It is estimated that the city of Johannesburg’s landfills airspace will be completely depleted by year 2023. This projection becomes a motivation for the identification of suitable WTE alternative avenues to manage waste in the city. The paper argues that WTE technologies can contribute significantly to sustainable waste management, economic growth, ecological and environmental well-being.     

Immersion frying for the thermal drying of sewage sludge: an economic assessment

This paper presents an economic study of a novel thermal fry-drying technology which transforms sewage sludge and recycled cooking oil (RCO) into a solid fuel. The process is shown to have significant potential advantage in terms of capital costs (by factors of several times) and comparable operating costs. Three potential variants of the process have been simulated and costed in terms of both capital and operating requirements for a commercial scale of operation. The differences are in the energy recovery systems, which include a simple condensation of the evaporated water and two different heat pump configurations. Simple condensation provides the simplest process, but the energy efficiency gain of an open heat pump offset this, making it economically somewhat more attractive. In terms of operating costs, current sludge dryers are dominated by maintenance and energy requirements, while for fry-drying these are comparatively small. Fry-drying running costs are dominated by provision of makeup waste oil. Cost reduction could focus on cheaper waste oil, e.g. from grease trap waste.     

Phosphorus recovery and recycling from waste: An appraisal based on a French case study

Phosphate rocks, used for phosphorus (P) fertilizer production, are a non-renewable resource at the human time scale. Their depletion at the global scale may threaten global food and feed security. To prevent this depletion, improved P resource recycling from food chain waste to agricultural soils and to the food and feed industry is often presented as a serious option. However, waste streams are often complex and their recycling efficiency is poorly characterized. The aim of this paper is to estimate the P recovery and recycling potential from waste, considering France as a case study. We assessed the P flows in food processing waste, household wastewater and municipal waste at the country scale using a substance flow analysis for the year 2006. We also quantified the P recycling efficiency as the fraction of P in waste that ultimately reached agricultural soils or was recycled in the food and feed industry. Efforts were made to limit data uncertainty by cross-checking multiple data sources concerning P content in waste materials. Results showed that, in general, P recovery in waste was high but that the overall P recycling efficiency was only 51% at the country scale. In particular, P recycling efficiency was 75% for industrial waste, 43% for household wastewater and 47% for municipal waste. The remaining P was discharged into water bodies or landfilled, causing P-induced environmental problems as well as losses of nutrient resources. Major P losses were through food waste (which amounted to 39% of P in available food) and treated wastewater, and the findings were confirmed through cross-checking with alternative data sources. Options for improving P resource recycling and, thereby, reducing P fertilizer use were quantified but appeared to be less promising than scenarios based on reduced food waste or redesigned agricultural systems.     

“三废”资源化利用探讨

针对我国环境污染严重,资源、能源利用率低的现状,胜利油田积极开展“三废”资源化工作。通过对废水、固体废物、工业废气资源化现状的分析,科学地论证了“三废”资源化具有投资少,处理工艺简单易行,处理成本低,管理难度小等优点。找出存在的主要问题,并提出下一步工作目标。     

放射性浓缩液桶内干燥过程数学模型及动态仿真

为实现放射性浓缩液最大程度减容,设计了桶内干燥系统,基于物料衡算与热量衡算,建立了干燥过程动态数学模型,考察了不同的工艺条件对系统总体运行参数的影响,预测了桶内物料质量、含盐率、理论料面高度、温度、蒸发速率等关键参数随时间的变化规律。结果表明:干燥总时长随加热功率、浓缩液含盐率、浓缩液温度、最终干燥盐分湿含率以及第一阶段单次加料体积的增大而减小;干燥初期,新物料的加入对桶内含盐率有较为显著的降低作用;提高干燥强度将降低料面高度,间接降低热能有效利用率;在典型的工艺条件下,桶内干燥系统理论干燥总时长为281.19h,平均蒸发速率为3.43kg/h,平均处理能力为4.05L/h。为桶内干燥系统设计及试验提供理论指导。     

Performance analysis of different orc power plant configurations using solar and geothermal heat sources

ABSTRACT

Energy optimization is performed on hybrid solar-geothermal power plant working according to Organic Rankine Cycle and installed in southern Tunisia. The performances of four different configurations of the power plant are studied. Mass and energy balances are established for the different compounds. The effects of the main operating parameters such as the geothermal water temperature, ambient temperature and direct normal irradiation on the power plant performances are analyzed. A code is established using Engineering Equation Solver software (EES) to perform the required calculations. Obtained results show that the hybrid solar-geothermal power plant with a heat recovery system is the most suitable configuration design giving a better overall energy efficiency of 15.77 and13.11% and a maximum net power of 1089 and 1882 kW in winter and summer, respectively. However, in the summer season, using a heat recovery system can valuable only when the water temperature is higher than 66°C. For air-cooled condenser, the suitable condensing pressure is 1 bar in winter and 1.9 bars in summer.