Dual oil concentration estimates in ecologically sensitive zones

Propagation of the oil spilling from a damaged oil tanker is considered in a limited sea area. Direct and adjoint estimates of the average oil concentration in special zones are derived by using solutions of the 2-D main and adjoint oil transport problems, respectively. The dual estimates complement each other nicely in studying the oil spill consequences. While the direct estimates are preferable to get a comprehensive idea of the oil spill impact on the whole area, the adjoint ones are specially useful and economical when the accident site-dependence or/and the oil spill rate-dependence of the oil concentration is/are studied only in a few ecologically sensitive zones. Indeed, each adjoint estimate explicitly relates the average oil concentration in a zone to the oil spill rate using the adjoint solution values at the accident site. Being independent of the two parameters (the accident site and oil spill rate), the adjoint solution can be found for each zone regardless of a concrete accident and used repeatedly for various possible values of these parameters. Several examples explain how to decide between two estimates.Thanks to special boundary conditions, the main and adjoint problems are both well-posed according to Hadamard (1923). The dual estimates can be generalized to the three dimensions. The balanced, absolutely stable and compatibie main and adjoint 3-D numerical algorithms by Skiba (1993) can easily be adapted to the problem discussed here.     

Workplace aerosol mass concentration measurement using optical particle counters

Direct-reading aerosol measurement usually uses the optical properties of airborne particles to detect and measure particle concentration. In the case of occupational hygiene, mass concentration measurement is often required. Two aerosol monitoring methods are based on the principle of light scattering: optical particle counting (OPC) and photometry. The former analyses the light scattered by a single particle, the latter by a cloud of particles. Both methods need calibration to transform the quantity of scattered light detected into particle concentration. Photometers are simpler to use and can be directly calibrated to measure mass concentration. However, their response varies not only with aerosol concentration but also with particle size distribution, which frequently contributes to biased measurement. Optical particle counters directly measure the particle number concentration and particle size that allows assessment of the particle mass provided the particles are spherical and of known density. An integrating algorithm is used to calculate the mass concentration of any conventional health-related aerosol fraction. The concentrations calculated thus have been compared with simultaneous measurements by conventional gravimetric sampling to check the possibility of field OPC calibration with real workplace aerosols with a view to further monitoring particle mass concentration. Aerosol concentrations were measured in the food industry using the OPC GRIMM? 1.108 and the CIP 10-Inhalable and CIP 10-Respirable (ARELCO?) aerosol samplers while meat sausages were being brushed and coated with calcium carbonate. Previously, the original OPC inlet had been adapted to sample inhalable aerosol. A mixed aerosol of calcium carbonate and fungi spores was present in the workplace. The OPC particle-size distribution and an estimated average particle density of both aerosol components were used to calculate the mass concentration. The inhalable and respirable aerosol fractions calculated from the OPC data are closely correlated with the results of the particle size-selective sampling using the CIP 10. Furthermore, the OPC data allow calculation of the thoracic fraction of workplace aerosol (not measured by sampling), which is interesting in the presence of allergenic particles like fungi spores. The results also show that the modified COP inlet adequately samples inhalable aerosol in the range of workplace particle-size distribution.     

分光光度法测定大气中的过氧化物

采用液氮冷冻法采集大气中的过氧化物,并用分光光度法测定其浓度.研究中对大气采样条件和样品测定条件进行了探讨,并将测定结果与高压液相色谱法的测定结果进行了对比.在野外大气监测中应用该方法测定了长江三角洲地区大气中过氧化物浓度及日变化规律.结果表明,分光光度法显色稳定,灵敏度高,检测下限为7.92×10-8mol/L,可用于测定大气中的H2O2和有机过氧化物,是一种操作方便,易于推广的方法.     

Monsoonal differences and probability distribution of PM10 concentration

There are many factors that influence PM₁₀ concentration in the atmosphere. This paper will look at the PM₁₀ concentration in relation with the wet season (north east monsoon) and dry season (south west monsoon) in Seberang Perai, Malaysia from the year 2000 to 2004. It is expected that PM₁₀ will reach the peak during south west monsoon as the weather during this season becomes dry and this study has proved that the highest PM₁₀ concentrations in 2000 to 2004 were recorded in this monsoon. Two probability distributions using Weibull and lognormal were used to model the PM₁₀ concentration. The best model used for prediction was selected based on performance indicators. Lognormal distribution represents the data better than Weibull distribution model for 2000, 2001, and 2002. However, for 2003 and 2004, Weibull distribution represents better than the lognormal distribution. The proposed distributions were successfully used for estimation of exceedences and predicting the return periods of the sequence year.     

低浓度SO_2检测管的研制

通过对常见的几种检测管法的比较，筛选出灵敏度较高的亚硝基铁氰化钠法；同时筛选出载体为６０—８０目的素陶瓷，指示剂浓度为２０％。玻璃管内径为２．０—２．３ｍｍ，采气速度为０．３（Ｌ／ｍｉｎ），采样体积为１２Ｌ，以此条件进行实验．结果表明，检测管变色长度对应ＳＯ２浓度的相关性很好；变异系数均小于１１０％，检测的重现性较好。检测管的测定值与理论值的平均相对误差为５．０９％（＜±１５％），最大相对误差为７．１３％（＜±２５％），准确度较高．测定结果可靠；与化学法比较，两者无显著性差异；浓度小于０．１５ｍｇ／ｍ３的Ｈ２Ｓ及浓度小于０．０１ｍｇ／ｍ３的ＮＯ２对ＳＯ２检测管无干扰．     

Estimating the radon concentration in water and indoor air

The paper presents the results of radon concentration measurements in the vicinity of water, indoor air and in contact to building walls. The investigations were carried out using CR-39 track detectors. Samples of ground water flowing out of many springs mostly in Arabian Gulf area except one from Germany have been studied. The results are compared with international recommendations and the values are found to be lower than the recommended value. Measuring the mean indoor radon concentrations in air and in contact to building walls in the dwellings of Kuwait University Campus were found 24.2 +/- 7.7, and 462 +/- 422 Bq m(-3) respectively. These values lead to average effective dose equivalent rates of 1.3 +/- 0.4 and 23 +/- 21 mSv year(-1), respectively.     

关于废水中污染物浓度日均值的思考

在环境污染防治工作从污染物浓度控制逐步向排污总量控制转变的过渡阶段 ,污染物浓度日均值仍然发挥着十分重要的作用。文章阐述了日均值的监测时段、监测频率及计算方法等技术要求 ,并结合排污总量监测 ,提出了一些建议     

Effect of fertilizer application on soil heavy metal concentration

A large amount of chemicals is annually applied at the agricultural soils as fertilizers and pesticides. Such applications may result in the increase of heavy metals particularly Cd, Pb, and As. The objective of this study was to investigate the variability of chemical applications on Cd, Pb, and As concentrations of wheat-cultivated soils. Consequently, a study area was designed and was divided into four subareas (A, B, C, and D). The soil sampling was carried out in 40 points of cultivated durum wheat during the 2006–2007 periods. The samples were taken to the laboratory to measure their heavy metal concentration, soil texture, pH, electrical conductivity, cationic exchange capacity, organic matter, and carbonate contents. The result indicated that Cd, Pb, and As concentrations were increased in the cultivated soils due to fertilizer application. Although the statistical analysis indicates that these heavy metals increased significantly (P value < 0.05), the lead and arsenic concentrations were increased dramatically compared to Cd concentration. This can be related to overapplication of fertilizers as well as the pesticides that are used to replant plant pests, herbs, and rats.     

皮革铬鞣废水回收利用中铬渣的铬量测定

本文研究了皮革铬鞣废水中铬的定性特征曲线。利用吸光度加合定律对大量实测数据进行统计处理。建立测定铬的实验室校准直线方程，相关系数γ＝０．９９６０．以此作为测定铬鞣废水及回收铬渣中铬量的实验室回归直线方程。并对本法的可靠性进行研究，结果令人满意。本法不仅大大简化了铬量测定的步骤．而且在提高分析效率的同时获得同等的检测结果。     

Prediction of daily ground-level ozone concentration maxima over New Delhi

The pollution levels in New Delhi from industrial, residential, and transportation sources are continuously growing. As one of the major pollutants, ground-level ozone is responsible for various adverse effects on both humans and foliage. The present study aims to predict daily ground-level ozone concentration maxima over a site situated in New Delhi through neural networks (NN) and multiple-regression (MR) analysis. Although these methodologies are case and site specific, they are being developed and used widely. Therefore, to test these methodologies for New Delhi where no such study is available for ground-level ozone, six models have been developed based on NNs and MR using the same input data set. The changes in the performance capability of the two methods are sensitive to the selection of input parameters. The results are encouraging, and remarkable improvements in the performance of the models have been observed.     

对环境空气氯化氢浓度限值的探讨

通过对环境空气中氯化氢的毒理作用,各类标准比较、标准来源、评价标准的计算方法等,对现有的环境空气质量标准进行了探讨,提出了需要对现行标准进行修订的建议.     

Estimation of suspended sediment concentration in rivers using acoustic methods

Acoustic Doppler current meters (ADV, ADCP, and ADP) are widely used in water systems to measure flow velocities and velocity profiles. Although these meters are designed for flow velocity measurements, they can also provide information defining the quantity of particulate matter in the water, after appropriate calibration. When an acoustic instrument is calibrated for a water system, no additional sensor is needed to measure suspended sediment concentration (SSC). This provides the simultaneous measurements of velocity and concentration required for most sediment transport studies. The performance of acoustic Doppler current meters for measuring SSC was investigated in different studies where signal-to-noise ratio (SNR) and suspended sediment concentration were related using different formulations. However, these studies were each limited to a single study site where neither the effect of particle size nor the effect of temperature was investigated. In this study, different parameters that affect the performance of an ADV for the prediction of SSC are investigated. In order to investigate the reliability of an ADV for SSC measurements in different environments, flow and SSC measurements were made in different streams located in the Aegean region of Turkey having different soil types. Soil samples were collected from all measuring stations and particle size analysis was conducted by mechanical means. Multivariate analysis was utilized to investigate the effect of soil type and water temperature on the measurements. Statistical analysis indicates that SNR readings ob tained from the ADV are affected by water temperature and particle size distribution of the soil, as expected, and a prediction model is presented relating SNR readings to SSC mea surements where both water temperature and sediment characteristics type are incorporated into the model. The coefficients of the suggested model were obtained using the multivariate anal ysis. Effect of high turbidity conditions on ADV performance was also investigated during and after rain events.     

Temporal variations of airborne particle concentration in an arid region

Airborne particle concentration (APC) measurements were carried out at the Sede Boker experimental station located in the northern Negev Desert, about 50 km south of Beer Sheva, during the years 1987--1997. The basic sampling period used in 1987--1993 was 12 h (day and night) and in 1994--1997 the sampling period was 24 h. For the entire study period, the average airborne particle concentration (APC) was 123.8 microg/m3, the highest value was 4204.2 microg/m3; and the lowest, near 5 microg/m3. For the 24 h average, about 90% of the cases were defined as normal situations (APC between 0-200 microg/m3) about, 8.5%, hazy periods (APC between 200-500 microg/m3), 1.4% dusty periods (APC between 500-1000 microg/m3) and about 0.7% were intense dusty periods (APC above 1000 microg/m3). Statistical analysis of the data showed significant seasonal and monthly fluctuations. The seasonal variation of the APC was further examined using different definitions of the seasons (astronomical, meteorological, and synoptic).     

Temporal variations of airborne particles concentration in the Brussels environment

We report and analyze data on the PM10 fraction of airborne particles measured at five recording stations in the Brussels region from October 2002 till September 2003. These stations are representative of the various activity sectors of the Brussels urban area. The objective was the determination of the origin of the PM10 particles (particles up to 10 μm) that are recorded in that region in order to follow the EU directives concerning tolerance level of airborne particles concentration. In order to evaluate the impacts of local and external factors that inject solid particles in the atmosphere of Brussels we compared concentration data from working and not working (holidays) periods. Moreover, we also compared concentrations from periods of agricultural activity and rest in the Brabant provinces surrounding the Brussels region for various crop types. The results lead to the conclusion that the impact or urban traffic is rather limited while that of the agricultural activities is important. Moreover, there appears a clear-cut distinction between different types of crops.     

拉曼光谱在比较水中杂质浓度的研究

为了比较不同水样品中所含杂质浓度的相对大小,运用激光拉曼光谱的分析方法,测量了四种不同水样品的激光拉曼光谱,同时还测量了蒸馏水的激光拉曼光谱.计算了它们的弯曲振动强度与伸缩振动强度之比,并对测量和计算结果进行了比较和分析.结果表明,水中所舍杂质浓度的相对大小不仅可以从其拉曼谱杂峰和毛刺的多少做定性比较,而且还可以从弯曲振动强度与伸缩振动强度的比值的相对大小做定量比较.这为水质分析提供了新的有效途径.     

Trace metal concentration in scalp hair of occupationally exposed autodrivers

The concentrations of Cr, Pb, Zn, Cu, Ni and Cd wereanalyzed by Atomic Absorption Spectrophotometer in thescalp hair of professional male autodrivers who areoccupationally exposed to the vehicular/industrialpollutants in the industrial city of Coimbatore, TamilNadu. The unwashed hair samples when compared with thewashed hair showed a significantly higher levels of Cr,Zn and Pb. The correlation coefficient showed a strongmutual dependence on the scalp hair of the exposedindividuals and no correlation was found among the tracemetals except for Ni–Pb and Ni–Cd. The results ingeneral showed a positive exogenous contribution of allthe analyzed industrial trace metals. The drivers who are occupationally exposed to vehicular/industrial pollution are at risk.     

Spatiotemporal analysis of the PM10 concentration over the Taranto area

In this paper, an analysis of air quality data is provided for the municipal area of Taranto (southern Italy) characterized by high environmental risks as formally decreed by the Italian government in the 1990s with two administrative measures. This is due to the massive presence of industrial sites with elevated environmental impact activities along the NW boundary of the city conurbation. The aforementioned activities have effects on the environment and on public health, as a number of epidemiological researches concerning this area reconfirm. The present study is focused on particulate matter as measured by PM10 concentrations at 13 monitoring stations, equipped with analogous instruments based on the Beta absorption technology, either reporting hourly, two-hourly, or daily measurements. Daily estimates of the PM10 concentration surfaces are obtained in order to identify areas of higher concentration (hot spots), possibly related to specific anthropic activities. Preliminary analysis involved addressing several data problems: (1) due to the use of two different validation techniques, a calibration procedure was devised to allow for data comparability; (2) imputation techniques were considered to cope with the large number of missing data, due to both different working periods and occasional malfunctions of PM10 sensors; and (3) reliable weather covariates (wind speed and direction, pressure, temperature, etc.) were obtained and considered within the analysis. Spatiotemporal modelling was addressed by a Bayesian kriging-based model proposed by Le and Zidek (2006) characterized by the use of time varying covariates and a semiparametric covariance structure. Advantages and disadvantages of the model are highlighted and assessed in terms of fit and performance. Estimated daily PM10 concentration surfaces are suitable for the interpretation of time trends and for identifying concentration peaks within the urban area.     

高浓度含氨废水中氨氮的快速测定

依据铵盐与甲醛反应生成等物质量酸的原理,建立了一种快速测定高浓度含氨废水中氨氮含量的甲醛法。试验结果表明,甲醛法所测结果与国家标准分析方法比较无显著性差异。该方法的加标回收率范围为96％～103％,具有快速、简便的优点,对合成氨工业废水和生活污水中氨氮的测定结果令人满意。     

Monitoring of total and bioavailable heavy metals concentration in agricultural soils

The aim of this paper is to evaluate total and bioavailable concentration of heavy metals in agricultural soils in order to estimate their distribution, to identify the possible correlations among toxic elements and the pollution sources, to distinguish the samples in relation to sampling site or to sampling depth, and to evaluate the available fraction providing information about the risky for plants. In particular, we reinvestigated total concentrations of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sb, V, and Zn and available concentrations of As, Be, Cd, Cr, Cu, Hg, Ni, Pb, Sb, and Zn in soil from Apulia (Southern Italy). Analytical results showed that total concentrations, for all soils, are in the range permitted by regulations in force in Italy, but some soils evidence slight enrichment of Cd, Cr, Cu, Pb, and Zn. All the heavy metals in the available fraction were below the detection limits of the analytical techniques used except Cu, Ni, Pb, and Zn.     

Determination of European methane emissions,using concentration and isotope measurements

The determination of methane emissions on a regional scale is needed in order to reduce some of the uncertainties in the global methane budget. Our measurements of the concentration and the Carbon-13 isotope composition (¹³C) of atmospheric methane are, combined with trajectories, used to get insight in the type and size of the methane emissions of a large area.