改性秸秆材料对高盐废水中染料和重金属的吸附性能研究

高盐印染废水是一种难处理的工业废水,其盐度高、色度高,含有染料、重金属等多种污染物.本文针对高盐印染废水中污染物的特点,设计了一种制备过程简单、成本经济的柠檬酸/丙烯酰胺改性秸秆材料(WA-CA-AM),并通过SEM、FI-IR和DTG等表征手段分别观测材料形貌、测定表面官能团和热稳定性.同时在不同盐度下,考察了单元/多元污染物体系中WS-CA-AM对4种污染物亚甲基蓝(MB)、甲基橙(MO)、铜离子(Cu~(2+))和铬离子(Cr~(6+))的吸附效果.结果表明:在单元污染物体系中,WS-CA-AM对污染物的吸附量随盐度的升高而降低;在多元污染物体系中同时存在竞争吸附和协同吸附;通过二元体系得出4种污染物的吸附受盐度影响大小顺序为MOCu~(2+)Cr~(6+)MB.在高盐度下,四元混合体系中MB和Cu~(2+)的吸附量均比染料/重金属二元混合体系的要大,Cr~(6+)的吸附量虽受到一些抑制但依然可观,表明改性秸秆材料在高盐印染废水的处理中具有巨大的应用潜力.     

铁有机骨架材料的快速合成及对阴离子染料的吸附性能

染料废水色度高,难以生化处理,吸附法是有色废水处理的重要方法.采用常温快速合成铁有机骨架材料,通过IR和XRD对合成的材料进行表征;并研究铁有机骨架材料对阴离子染料的吸附性能.结果表明常温快速反应能够合成铁有机骨架材料,材料比表面积和孔体积较高,等电点p H为3.7.铁有机骨架材料在酸性条件下更容易吸附水中的阴离子染料;随染料浓度的增加,材料对染料的吸附量逐渐增大,Langmuir恒温吸附模型可以很好描述该过程,计算的吸附参数表明吸附过程容易进行.材料对染料的吸附为准二级动力学,染料结构会显著影响铁骨架材料吸附过程,络合结构的偶氮染料能够快速达到吸附平衡.     

Dye removal from wastewater using the adsorbent developed from sewage sludge

Introduction Adsorptionisrelevantinenvironmentalpollutionandprotectionwithreferencetowaterandwastewatertreatment(Bowen,1992).Toxicmaterials,hazardousionsanddyes fromindustrialeffluentsbythewayofadsorptionareofgreatsignificantinconnectionwithenvironmentala…     

Isolation and characterization of Pseudomonas otitidis WL-13 and its capacity to decolorize triphenylmethane dyes

Pseudomonas otitidis WL-13, which has a high capacity to decolorize triphenylmethane dyes, was isolated from activated sludge obtained from a wastewater treatment plant of a dyeing industry. This strain exhibited a remarkable color-removal capability when tested against several triphenylmethane dyes under both shaking and static conditions at high concentrations of dyes. More than 95% of Malachite Green and Brilliant Green was removed within 12 h at 500 μmol/L dye concentration under shaking conditions. Cry...     

污泥活性炭对染料的吸附动力学研究

以城市污水处理厂脱水污泥作为原料,采用化学活化法(ZnCl2作为活化剂)制得污泥活性炭,全面研究了污泥活性炭对活性艳红K-2BP、酸性大红GR和直接紫N这3种染料的吸附动力学行为.结果表明,污泥活性炭可以有效地吸附染料,实现污泥的资源化;3种染料的平衡吸附量qe均随着染料初始浓度和温度的增大而增大,相同条件下平衡吸附量qe的大小顺序为:酸性大红GR＞活性艳红K-2BP＞直接紫N;伪二级动力学模型能够很好地描述3种染料在污泥活性炭上的吸附动力学行为;对于活性艳红K-2BP和直接紫N,颗粒内扩散过程是该吸附速率的控制步骤,但不是唯一的速率控制步骤,吸附速率同时还受颗粒外扩散过程的控制,而对于酸性大红GR,颗粒内扩散过程不是吸附速率的控制步骤;污泥活性炭对3种染料的吸附是一个吸热过程,吸附活化能较小,主要为物理吸附过程.     

Synthesis of malachite@clay nanocomposite for rapid scavenging of cationic and anionic dyes from synthetic wastewater

Synthesis of malachite@clay nanocomposite was successfully carried out for the removal of cationic (Methylene Blue, MB) and anionic dyes (Congo Red, CR) from synthetic wastewater. Nanocomposite was characterized by TEM, SEM, FT-IR, EDS analysis and zeta potential. TEM analysis indicated that the particle diameter of nanocomposite was in the range of 14 to 23 nm. Various important parameters viz. contact time, concentration of dyes, nanocomposite dosage, temperature and solution pH were optimized to achieve maximum adsorption capacity. In the case of MB, removal decreased from 99.82% to 93.67% while for CR, removal decreased from 88.55% to 75.69% on increasing dye concentration from 100 to 450 mg/L. pH study confirmed the higher removal of CR in acidic range while MB removal was higher in alkaline range. Kinetic study revealed the applicability of pseudo-second-order model for the adsorption of both dyes. Negative values of ΔG⁰ for both systems suggested the feasibility of dye removal and support for spontaneous adsorption of CR and MB on nanocomposite. Nanocomposite showed 277.77 and 238.09 mg/g Langmuir adsorption capacity for MB and CR respectively. Desorption of dyes from the dye loaded nanocomposite was easily carried out with acetone. The results indicate that the prepared malachite@clay nanocomposite is an efficient adsorbent with high adsorption capacity for the aforementioned dyes.     

活性炭纤维电极法处理印染废水的应用研究

采用新型催化电极处理了１８种水溶性及水不溶性染料液，并应用于数种实际扎染残液的处理，脱色率可达到９５％￣１００％，ＣＤＣｃｒ去除率达到４０％￣７０％。初步探讨了该电化学处理系统的反应机理，推论整个处理为吸附，自由基聚合和絮凝反应相结合的过程。     

改性硅藻土对三种有机染料的吸附作用研究

以天然硅藻土分别负载十六烷基三甲基溴化铵(CTMAB)、四甲基溴化铵(TMAB)和壳聚糖,制得一系列改性硅藻土,研究了改性硅藻土吸附水中的阴离子染料(活性红120)、阳离子染料(亚甲基蓝)、酸性染料(玫瑰红B)的适宜条件及吸附机理.结果表明,天然硅藻土对亚甲基蓝、四甲基溴化铵改性硅藻土对玫瑰红B和壳聚糖改性硅藻土对活性红120的饱和吸附量分别为51.15、49.56、56.64mg.L-1,效果良好,可被直接利用.延长吸附时间、增大吸附剂用量、控制溶液的pH值(<6)都能提高改性硅藻土吸附剂的吸附效果;3种染料在各自吸附剂上的平衡吸附量Qe与平衡浓度Ce之间的关系均符合Freundlich等温吸附方程,表明改性硅藻土吸附染料以分配作用、弱的溶质吸收为主.改性剂的引入可以改变硅藻土的表面电性,从而对不同类型染料的吸附能力产生不同影响.     

The addition of microbes for treating textile wastewater

Some strains and culture of bacteria which are able to decolorize dyes and degrade polyvinyl alcohol(PVA) were isolated and selected. A pilot scale facultative anaerobic-aerobic biological process was applied for treatment of textile wastewater containing dyes and PVA. Activated carbon adsorption was used as a tertiary treatment stage, and residual sludge from clarifier returned to the anaerobic reactor again. The pilot test were carried out with two systems. One was inoculated by acclimated sludge, and the another was adding the mixed culture of dye-decoloring and PVA-degrading bacteria for forming biological films, the latter was observed to be more effective than the former. The test has run normally for ten months with a COD loading of 2.13 kg/m3/day, a BOD5 loading of 0.34 kg/m3/day in anaerobic reactor; a COD loading of 1.71 kg/m3/day, a BOD5 loading 0.44 kg/m3/day in aerobic reactor. The pollutants removal efficiency by adding microbes was about 20% higher than that by acclimated sludge. The aver     

Environmental application of three-dimensional graphene materials as adsorbents for dyes and heavy metals: Review on ice-templating method and adsorption mechanisms

The remediation of wastewater requires treatment technologies which are robust, efficient, simple to operate and affordable such as adsorption. Lately, three-dimensional (3D) graphene based materials have attracted significant attention as effective adsorbents for wastewater treatment. The intrinsic properties of 3D graphene structure such as large surface area and interconnected porous structure can facilitate the transport of pollutants into the 3D network and provide abundant active sites for trapping the pollutants. For the synthesis of 3D graphene structure, ice-templating is commonly practiced due to its facile steps, cost effectiveness and high scalability potential. This review covers the ice-templating fabrication technique for 3D graphene based materials and their application as adsorbents in eliminating dyes and heavy metals from aqueous media. The assembly mechanisms of the ice-templating fsynthesis are comprehensively discussed. Further discussion on the fundamental principles, critical process parameters and characteristics of ice-templated 3D graphene structures is also included. A thorough review on the mechanisms for batch adsorption of dyes and heavy metals is presented based on the structures and properties of the 3D graphene materials. The review further evaluates the dynamic adsorption in packed columns and the regeneration of 3D graphene based materials.     

TiO2/Ag modified penta-bismuth hepta-oxide nitrate and its adsorption performance for azo dye removal

A modified hydrophilic penta-bismuth hepta-oxide nitrate (Bi₅O₇NO₃) surface was synthesized via a precipitation method using TiO₂ and Ag as modified agents. The synthesized product was characterized by different analytical techniques. The removal efficiency was evaluated using mono-and di-sulphonated azo dyes as model pollutants. Different kinetic, isotherm and diffusion models were chosen to describe the adsorption process. X-ray photoelectron spectroscopy (XPS) results revealed no noticeable differences in the chemical states of modified adsorbent when compared to pure Bi₅O₇NO₃;however, the presence of hydrophilic centres such as TiO₂ and Ag developed positively charged surface groups and improved its adsorption performance to a wide range of azo dyes. Dyes removal was found to be a function of adsorbent dosage, initial dye concentration, solution pH and temperature. The reduction of Langmuir 1,2-mixed order kinetics to the second or first-order kinetics could be successfully used to describe the adsorption of dyes onto the modified adsorbent. Mass transfer can be described by intra-particle diffusion at a certain stage, but it was not the rate limiting step that controlled the adsorption process. Homogenous behavior of adsorbent surface can be explored by applying Langmuir isotherm to fit the adsorption data.     

粘土颗粒吸附直接染料的分形特征

粘土颗粒对直接耐晒黑和直接大红染料的吸附均可分为快速的边缘覆盖和慢速的晶层吸附2个过程,整个吸附过程符合准-二级反应动力学方程式,除了伊利土-直接耐晒黑染料的吸附体系之外,其它体系的吸附过程中以晶层吸附为主的阶段均具有类分形特征.体系的非线性吸附等温线符合Langmuir型吸附等温模式,并且除了蒙脱土吸附直接大红染料之外,也可以用分形Langmuir吸附等温模式获得较好的模拟效果.在不同原始浓度下直接大红染料在粘土颗粒表面发生的边缘覆盖和晶层吸附这2个过程的程度是不同的,从而导致了吸附等温线在原始染料为150mg·L-1时出现最大的吸附量,而且颗粒边缘覆盖的直接大红染料的比例较高.染料进入粘土颗粒的晶层后,扩大了晶层间距,改变了其表面微孔几何结构.颗粒表面棱角变得光滑,结构疏松,片层结构逐渐减少,上述效果在蒙脱土颗粒上或直接耐晒黑染料吸附时表现地更为显著.而且吸附染料后蒙脱土颗粒对N2的吸附量比伊利土下降的幅度小,其比表面积、孔体积和平均孔径的下降比例也比伊利土小,其中平均孔径的差异比较明显.吸附染料之后粘土颗粒表面分形维数Ds均升高了,晶层膨胀和开孔作用抵消了"表面粗糙度屏蔽"、"孔阻塞效应"机理降低Ds的影响.增加了表面粗糙度.     

Assessment and prediction of the effect of ageing on the adsorption of nonylphenol in black carbon-sediment systems

Black carbon (BC) is a promising sediment amendment, as proven by its considerable adsorption capacity for hydrophobic organic pollutants and accessibility, but its reliability when used for the removal of pollutants in natural sediments still needs to be evaluated. For example, the ageing process, resulting in changing of surface physicochemical properties of BC, will decrease the adsorption capacity and performance of BC when applied to sediment pollution control. In this study, how the ageing process and BC proportion affect the adsorption capacity of BC-sediment systems was modelled and quantitatively investigated to predict their adsorption capacity under different ageing times and BC additions. The results showed that the ageing process decreased the adsorption capacity of both BC-sediment systems, due to the blockage of the non-linear adsorption sites of BC. The adsorption capacity of rice straw black carbon (RC)-sediment systems was higher than that of fly ash black carbon (FC)-sediment systems, indicating that RC is more efficient than FC for nonylphenol (NP) pollution control in sediment. The newly established model for the prediction of adsorption capacity fits the experimental data appropriately and yields acceptable predictions, especially when based on parameters from the Freundlich model. However, to fully reflect the influence of the ageing process on BC-sediment systems and make more precise predictions, it is recommended that future work considering more factors and conditions, such as modelling of the correlation between the adsorption capacity and the pore volume or specific surface area of BC, be applied to build an accurate and sound model.     

青霉菌(Penicillium sp.)对三种活性染料的吸附和降解

通过14C标记底物的矿化实验发现青霉菌对多聚芳香族化合物有一定降解能力,本研究以3种偶氮和蒽醌型活性染料为作用底物,结果表明,青霉菌G-1 (Penicillium sp.)对染料进行吸附,吸附等温线符合Langmuir模型,最大理论吸附量(Q_max)可达169.5～243.9mg/g干重,被吸附染料最早在第4d完全脱色降解,有菌丝和去除菌丝的培养液中再次加入染料,均可在20～30h内使染料完全脱色降解.     

藻菌系统降解偶氮染料的机理研究

研究了藻、菌及藻菌共存系统对偶氮染料降解的机理.50种偶氮染料的降解试验表明,多数偶氮染料可被藻、菌或二者共存系统所降解.藻也能单独降解偶氮染料,其降解机理基本一致:偶氮化合物的偶氮双键首先被还原裂解,产生芳香胺,芳香胺再被进一步降解.偶氮双键还原是由偶氮还原酶催化的.偶氮还原酶受氧抑制.芳香胺的降解是需氧的.     

Influence of particle size and salinity on adsorption of basic dyes by agricultural waste： dried Seagrape （Caulerpa lentiUifera）

Green macroalga Caulerpa lentillifera was found to have reasonable adsorption capacity for basic dyes, Astrazon Blue FGRL （AB）, Astrazon Red GTLN （AR）, and Astrazon Golden Yellow GL-E （AY）. The initial dye concentration was in the range of 100-1,800 mg/L. The dried algal sorbent was ground and sieved into 3 sizes： S （0.1-0.84 mm）, M （0.84-2.0 mm）, and L sizes （larger than 2.0 mm）. For all conditions examined in this work （at 25℃ in batch systems）, the adsorption reached equilibrium within the first hour. The kinetic data corresponded well with the pseudo second order kinetic model where the rate constant, k2, decreased as the sorbent size increased for all dyes. The adsorption isotherms followed both Langmuir and Freundlich models. Among three sorbent sizes, S size gave the highest adsorption capacity followed by M and L sizes. A reduction of sorbent size increased the specific surface area for mass transfer, and also increased the total pore volume, thus providing more active sites for adsorption. The adsorption of AB was adversely influenced by the protonation of algal surface at low pH. On the other hand, the adsorption of AR and AY could be due to weak electrostatic interaction, which was not significantly affected by pH. Increasing salinity of the system caused a decrease in adsorption capacity possibly due to the competition between Na^＋ and the dye cations for the binding sites on algal surface. Moreover, an increase in salinity generated a compressed electrical double layer on the algal surface which exerted repulsive force, retarding the adsorption of positive charged molecules such as the basic dyes.     

干活性污泥吸附水中染料的试验研究

以城市污水处理厂干活性污泥为吸附剂对染料直接深棕M、酸性媒介棕RH进行了吸附研究,结果表明,吸附过程能很好地用二级速率表达式表示,同时也可用Lagergren一级速率方程描述。其一级吸附速率常数k1分别为0.0204min-1和0.0068min-1,二级吸附速率常数k2分别为0.00592和0.00589gmg-1min-1。两者的吸附特性不同,其吸附等温线前者符合Freundlich方程,后者既符合Freundlich方程也符合Langmuir方程。吸附平衡时间、去除率亦不同,前者明显大于后者,达到吸附平衡的时间分别为120min和240min。两种染料的正辛醇/水分配系数logP计算数值分别为4.65和-0.22,这一顺序与两种染料在干污泥上的吸附行为相符。     

Recent advances based on the synergetic effect of adsorption for removal of dyes from waste water using photocatalytic process

The problem of textile dye pollution has been addressed by various methods,mainly physical,chemical,biological,and acoustical.These methods mainly separate and/or remove the dye present in water.Recently,advanced oxidation processes(AOP)have been focused for removal of dye from waste water due to their advantages such as ecofriendly,economic and capable to degrade many dyes or organic pollutant present in water.Photocatalysis is one of the advance oxidation processes,mainly carried out under irradiation of light and suitable photocatalytic materials.The photocatalytic activity of the photocatalytic materials mainly depends on the band gap,surface area,and generation of electron–hole pair for degradation dyes present in water.It has been observed that the surface area plays a major role in photocatalytic degradation of dyes,by providing higher surface area,which leads to the higher adsorption of dye molecule on the surface of photocatalyst and enhances the photocatalytic activity.This present review discusses the synergic effect of adsorption of dyes on the photocatalytic efficiency of various nanostructured high surface area photocatalysts.In addition,it also provides the properties of the water polluting dyes,their mechanism and various photocatalytic materials;and their morphology used for the dye degradation under irradiation of light along with the future prospects of highly adsorptive photocatalytic material and their application in photocatalytic removal of dye from waste water.     

青霉菌GX2对蒽醌染料的吸附作用

GX2生长菌体对 4种蒽醌染料均表现出优良的吸附性能 ,但由于染料分子的结构不同 ,吸附速率和吸附率也表现出一定的差异 .染料对菌体的生长具有一定的抑制作用 ,但即使在很高的染料浓度下 ,GX2生长菌体仍表现出很强的吸附性能 .对 250mg/L活性艳蓝KN-R的吸附率高达 100% ,对 400mg/LKN R的吸附率也可达91.4% .在 0～2%范围内 ,随着盐度 (NaCl)的增加 ,菌体干重增加 ;颗粒状菌团的直径却随之减小 ,比表面积增大 ,对GX2生长菌体的染料吸附表现出较为明显的促进作用 .碳源浓度通过影响菌体的生长而影响染料吸附 ,当培养基中的葡萄糖浓度大于 2.5g/L时 ,即可使浓度为 120mg/L的活性艳蓝KN R溶液完全脱色 .生长菌体具有比静止活体和死体更好的吸附性能 .     

Adsorption of dyes onto activated carbon prepared from olive stones

Activated carbon was produced from olive stones（OSAC） by a physical process in two steps. The adsorption character of this activated carbon was tested on three colour dyes molecules in aqueous solution： Methylene blue（MB）, Rhodamine B（RB） and Congo Red（CR）. The adsorption equilibrium was studied through isotherms construction at 30℃, which were well described by Langmuir model. The adsorption capacity on the OSAC was estimated to be 303 mg/g, 217 mg/g and 167 mg/g respectively for MB, RB and CR. This activated carbon has a similar adsorption properties to that of commercial ones and show the same adsorption performances. The adsorption kinetics of the MB molecule in aqueous solution at different initial concentrations by OSAC was also studied. Kinetic experiments were well fitted by a simple intra-particle diffusion model. The measured kinetics constant was influenced by the initial concentration and we found the following correlation： Kid = 1.55 C0^0.51.