城市污水中PCBs的分析及其QA/QC研究

报道了一种城市污水中痕量PCBs的分析方法,并进行了QA/QC研究,采用二氯甲烷萃取剂对城市污水进行液-液萃取,联合运用浓硫酸和硅胶层析柱将PCBs与杂质分离,以毛细管GC-ECD和内标法对PCBs定量.空白加标回收试验得出,PCBs的回收率为58%～125%,标准偏差为0.00173～0.00778μg/L,相对标准偏差为1.58%～12.43%.以实际城市污水作为加标基质,得出加入污水中的19种PCBs的分析方法回收率为57.6%～129.2%,方法的检测限为0.010～0.056μg/L,满足了US EPA对PCBs回收率要求.经过3次平行测定,测得实际城市污水中PCBs含有9种PCBs,PCBs总量的平均值为0.0235μg/L,相对标准偏差为9.63%,该分析方法所需的仪器简便、容易操作.     

全自动固相萃取-GC-MS/MS法测定水中多氯联苯

采用全自动固相萃取-气相色谱/三重四极杆串联质谱法(SPE-GC-MS/MS)分析水中7种指示性多氯联苯,通过优化测定条件,使PCBs在0.100μg/L～100μg/L范围内线性良好,方法检出限为0.07 ng/L～0.1 ng/L,回收率为72.1%～102%,RSD为5.8%～12.9%。将该方法用于实际水样测定,结果城市污水处理厂的出水中PCBs检出率较高,而废旧电容器封存点周边地表水易受到PCBs的污染。     

空气中多氯联苯的定量研究

使用大流量采样器,分别以石英纤维滤膜(QFF)和聚氨基甲酸乙酯泡沫(PUF)对空气中颗粒相和气相PCBs进行采集。以GC/MS为检测手段,采用选择性离子检测技术(SIM)对PCBs进行定性,内标法结合响应因子法进行PCBs的定量。PCBs的仪器检测限为4.40~93.60pg,回收率为68.57%~121.28%。气相和颗粒相PCBs的方法检测限分别为2.36~381.75fg/m3和2.78~348.81fg/m3。吸附和穿透试验结果表明,在采样流速为0.23m3/min、采样时间为24h的条件下,吸附和穿透情况对空气中PCBs的定量不会产生显著影响。     

土壤中多氯联苯简化计算定量方法研究

针对含有两种或两种以上Aroclor多氯联苯混合物的样品,研究其简便易行的定性、定量方法。将复杂样品中的多氯联苯分别折算成Aroclor 1016、1242、1260含量,在定性的同时予以定量。3种不同组分混合样品的加标回收率分别为68.2%～80.6%、67.9%～74.2%、67.1%～76.8%,实际土壤样品的测定结果与已有研究结果相吻合。方法缺点为无法识别和计算各Aroclor之间的准确比例,可用于应急监测复杂组分样品中多氯联苯的测定。     

ASE-GC/MSMS多离子反应监测(MRM)测定土壤中的16种多环芳烃(PAHs)

采用加速溶剂萃取-凝胶色谱净化-三重四极杆串联气相色谱质谱多离子反应监测技术建立了土壤中16种多环芳烃的分析方法.通过优化试验条件,方法线性关系良好,16种多环芳烃的最低检出浓度在0.055～0.585μg/kg之间.回收率在72.1%～101.4%之间,相对标准偏差在2.9%～9.5%之间.大量实际样品的测定结果表明,该方法定性定量准确、灵敏度高、重复性好,能够满足实际土壤分析工作的需要.     

串联四极杆质谱(GC-QqQ-MS/MS)测定土壤中的有机氯农药和多氯联苯

建立了用加速溶剂萃取仪(ASE)萃取、凝胶渗透色谱(GPC)净化、气相色谱/串联四极杆质谱多反应监测、同时测定土壤中17种有机氯农药和19种多氯联苯的方法.加标浓度在3.3μg/kg时的平均回收率在79.6%～93.2%之间,相对标准偏差在2.9%～13.0%之间,定量限在0.01～0.51μg/kg之间.在检测土壤样品中的有机氯农药和多氯联苯残留方面,Gc-QqQ-MS/MS相对于气相色谱/电子捕获检测器(GC-ECD)和GC-MS的选择离子检测(SIM)模式具有非常明显的优势,尤其是在低浓度水平的定性和定量方面.     

CRC-ICP-MS在重金属突发环境事件中的半定量方法研究

采用非反应性的He碰撞模式和动能歧视与ICP-MS的联用技术,建立了一套在重金属环境突发事件中的半定量检测方法.通过对三江口表层水样加标回收及ESS-2标准土壤样品的半定量分析,结果显示,该方法能够有效消除各种来源和各种活性的多原子离子干扰,实现多种重金属元素的一次性快速测定,水样的回收率85.5%～09%,标准土壤样品的回收率84%～107%.该方法已成功应用于两次突发环境事件中,为快速处理提供了科学依据.     

兰州市土壤中PAHs和PCBs的分布特征及风险评价

通过采集兰州市各功能区表层土壤样品,分析土壤中PAHs和PCBs的分布特征及潜在风险。结果表明,兰州市土壤中16种PAHs的平均质量比为5 734μg/kg,其中7种致癌芳烃的平均质量比为276μg/kg;18种PCBs的平均质量比为45.9μg/kg,其中7种指示性PCBs的平均质量比为10.8μg/kg。风险评价结果表明,除苊为高生态风险外,兰州市土壤中PAHs其他组分和PCBs均处于低中生态风险。16种PAHs的毒性当量浓度为59.9μg/kg,主要贡献者为苯并[a]芘和苯并[b]荧蒽;7种指示性PCBs的毒性当量浓度为1.96×10~(-4)μg/kg,主要贡献来源为PCB138和PCB118。     

甲醇提取-吹扫捕集-气质联用法快速测定土壤中8种苯系物

采用甲醇提取-吹扫捕集的前处理方法并结合气相色谱-质谱仪来测定土壤样品中的8种苯系物。实验结果表明,8种苯系物在前处理过程中被有效提取出来并被准确定性和定量,对于低浓度样品也具有良好的实验效果。此方法的检出限为0.3～0.8μg/kg,测定下限为1.2～3.2μg/kg。加标低、中、高3种不同质量比的标准物质,经实验分析土壤中8种苯系物相对标准偏差(RSD)为2.1%～6.8%,加标回收率为91.0%～105%,与相关行业标准相比具有一定的优势。     

二(口恶)(口英)类物质常用的分析测定方法

介绍了目前二类物质常用的前处理与分析测定方法,包括提取方法、净化方法和定性与定量方法。并列举了PCDD/Fs与PCBs分离的常用手段,并就它们的优缺点进行了比较,提出HPLC虽然是其中最昂贵的方法,但是值得一用,并且可以一劳永逸。而就分析测定手段来讲,要根据研究目的和样品情况选择合适的方法。     

A New Mathematical Approach in Environmental and Life Sciences: Gene–Environment Networks and Their Dynamics

An important research area in life sciences is devoted to modeling, prediction, and dynamics of gene-expression patterns. As clearly understood in these days, this enterprise cannot become satisfactory without acknowledging the role of the environment. To a representation of past, present, and most likely future states, we also encounter measurement errors and uncertainties. This paper surveys and improves recent advances in understanding the foundations and interdisciplinary implications of the newly introduced gene–environment networks, and it integrates the important theme of carbon dioxide emission reduction into the networks and dynamics. We also introduce some operational and managerial issues of practical working and decision making, expressed in terms of sliding windows, quadrants (modules) of parametric effects, and navigating (controlling) between such effects and directing them. Given data from DNA microarray experiments and environmental records, we extract nonlinear ordinary differential equations that contain parameters that have to be determined. For this, we employ modern (Chebychevian) approximation and (generalized semi-infinite) optimization. After this is provided, time- discretized dynamical systems are studied. A combinatorial algorithm with polyhedra sequences allows to detect the region of parametric stability. Finally, we analyze the topological landscape of gene–environment networks with its structural (in)stability. By embedding as a module and investigating CO₂ emission control and figuring out game theoretical aspects, we conclude. This pioneering work is theoretically elaborated, practically devoted to health care, medicine, education, living conditions, and environmental protection, and it invites the readers to future research.      

Topsoil and Housedust Metal Concentrations in the Vicinity of a Lead Battery Manufacturing Plant

The aim of the study was to determine the extent of heavy metal pollution in the vicinity of a lead battery manufacturing plant in the Czech Republic, both in the general environment and within homes. Topsoils (0–5 cm) were sampled from 100 sites along 4 transects which crossed the battery factory, the town centre and outlying rural areas. Housedust samples were collected from 15 plant-workers' homes and 15 non plant-workers' homes located at various distances from the factory. Samples were analysed for levels of Pb, Zn, Cd, Cu, As and Sb, using ICP-AES. Soil concentrations of Pb, Cd, As and Sb peaked at the perimeter fence of the battery factory with Pb levels of up to 12 650 g g> ^-1. Concentrations of these metals decreased exponentially within 500 m of the plant. Whilst the battery factory does appear to be a source of all the metals with the exception of Zn, emissions do not appear to be transported to any great extent over distances of more than 0.5 km. Topsoil and housedust concentrations of Pb, Zn, Cd, Cu, As and Sb in the general Mlada Boleslav area do not appear to be significantly different from those recorded in a large scale survey of urban soils in the United Kingdom. A comparison of housedust Pb concentrations in homes of plant workers and non-plant workers suggests that there may be a small input of Pb into the home environment by battery plant employees.     

An Overview of Contaminant-Related Issues Identified by Monitoring in San Francisco Bay

The San Francisco Estuary Regional Monitoring Program for Trace Substances (RMP) began in 1993 and is sponsored by 74 local, state, and federal agencies and companies through their discharge or Bay use permits. The RMP monitors water, sediment, toxicity, and bivalve bioaccumulation at 25 sites in the Bay that are considered to represent "background" conditions. Several major environmental issues have been identified by the RMP. Polychlorinated biphenyls and mercury were often above water quality guidelines, and often occurred in fish tissues above U.S. Environmental Protection Agency (U.S. EPA) screening values. Concentrations do not appear to be decreasing, suggesting continuing inputs. Episodes of aquatic toxicity often occurred following runoff events that transport contaminants into the Bay from urbanized and agricultural portions of the watershed. Sediment toxicity occurred throughout the Bay, and has been correlated with concentrations of specific contaminants (chlordanes, polynuclear aromatic hydrocarbons) at some locations; mixtures of contaminants were probably also important. Since the RMP does not monitor all ecosystem components, assessments of the overall condition of the Bay cannot be made. However, in terms of contamination, the RMP samples suggest that the South Bay, and North Bay sites are moderately contaminated.     

Biomagnification factors (fish to Osprey eggs from Willamette River,Oregon, U.S.A.) for PCDDs,PCDFs, PCBs and OC pesticides

A migratory population of 78 pairs of Osprey (Pandion haliaetus) nesting along the Willamette River in westernOregon was studied in 1993. The study was designed to determinecontaminant concentrations in eggs, contaminant concentrationsin fish species predominant in the Ospreys diet, andBiomagnification Factors (BMFs) of contaminants from fish specieseaten to Osprey eggs. Ten Osprey eggs and 25 composite samplesof fish (3 species) were used to evaluate organochlorine (OC)pesticides, polychlorinated biphenyls (PCBs), polychlorinateddibenzo-p-dioxins (PCDDs), and polychlorinated dibenzofurans(PCDFs). Mercury was also analyzed in fish. Geometric meanresidues in Osprey eggs were judged low, e.g., DDE 2.3 g g^-1 wet weight (ww), PCBs 0.69 g g^-1, 2,3,7,8-TCDD 2.3 ng kg^-1, and generally well below known threshold values for adverse effects on productivity, and the population was increasing. Osprey egg residue data presentedby River Mile (RM) are discussed, e.g., higher PCDDs were generally found immediately downstream of paper mills and eggsfrom the Willamette River had significantly elevated PCBs and PCDDs compared to reference eggs collected nearby in the CascadeMountains. Prey remains at nest sites indicated that the Largescale Sucker (Catostomus macrocheilus) and NorthernPikeminnow (Ptychocheilus oregonensis) accounted for an estimated 90.1% of the biomass in the Osprey diet, and composite samples of these two species were collected from different sampling sites throughout the study area for contaminant analyses. With the large percentage of the fishbiomass in the Osprey diet sampled for contaminants (and fisheaten by Ospreys similar in size to those chemically analyzed),and fish contaminant concentrations weighted by biomass intake, a mean BMF was estimated from fish to Osprey eggs for the largeseries of contaminants. BMFs ranged from no biomagnification(0.42) for 2,3,7,8-TCDF to 174 for OCDD. Our findings for themigratory Osprey were compared to BMFs for the resident HerringGull (Larus argentatus), and differences are discussed. Webelieve a BMF approach provides some basic understanding ofrelationships between contaminant burdens in prey species offish-eating birds and contaminants incorporated into their eggs,and may prove useful in understanding sources of contaminants inmigratory species although additional studies are needed.     

Cyanobacterial Flora from Polluted Marine Shores

Citation of cyanobacterial cultures from the shores of south west coast of Gujarat, India and their relationship with sea water quality, influenced by extensive pollutant runoff is reported in this study. Intensity of pollution was evaluated by physico-chemical analysis of water. Higher load of suspended solids (60–1000 mg l⁻¹) and nutrients (PO₄ ⁻P: 1.3–4 μmole l⁻¹ and NO₃ ⁻N: 12.5–17.8 μmole l⁻¹) were persistent throughout the analysis. Community structure is seen to be influenced by such persistent pollution. Twenty nine cyanobacterial species were isolated belonging to 9 genera of 4 families, with an elevated occurrence of Oscillatoria and Lyngbya species. No heterocystous cyanobacteria were isolated throughout the study.     

The Draft of the New German Guideline VDI 3782/8 to Model Automobile Exhaust Dispersion

The draft of the German guideline to calculate automobile exhaust dispersion is explained. It contains a two-stage-system: For first quick estimates the guideline contains the simple models MLuS and STREET. In case these models are not applicable or their results shows concentration levels close to the air quality standards, the more complex models PROKAS_V and MISKAM are recommended. PROKAS_V is a Gaussian plume model, MISKAM is a 3-dimensional microscale non hydrostatic flow model for built-up areas with an Eulerian dispersion model. The guideline comprises cases in rural areas without or with few adjacent buildings as well as urban areas with buildings near the roads. The contribution gives information about the models, typical results and some of the problems showing up presently.     

An investigation on biological stability of product water generated by lab-scale and pilot-scale distillation systems

Material Disposal Area G is the primary low-levelradioactive waste disposal site at Los Alamos NationalLaboratory, New Mexico, and is adjacent to Pueblo of SanIldefonso lands. Pueblo residents and Los Alamos scientists areconcerned about radiological doses resulting from uptake of AreaG radionuclides by mule deer (Odocoileus hemionus) andRocky Mountain elk (Cervus elaphus), then consumption ofdeer and elk meat by humans. Tissue samples were collected fromdeer and elk accidentally killed near Area G and were analyzedfor ³H, ⁹⁰Sr, total U, ²³⁸Pu, ^{239, 240}Pu,²⁴¹Am, and ¹³⁷Cs. These data were used to estimatehuman doses based on meat consumption of 23 kg y^-1. Humandoses were also modeled using RESRAD, and dose rates to deer andelk were estimated with a screening model. Dose estimates tohumans from tissue consumption were 2.9 × 10^-3 mSv y^-1and 1.6 × 10^-3 mSv y^-1 from deer and elk, respectively,and RESRAD dose estimates were of the same order of magnitude. Estimated dose rates to deer and elk were 2.1 × 10^-4 mGyd^-1 and 4.7 × 10^-4 mGy d^-1, respectively. Allestimated doses were significantly less than established exposurelimits or guidelines.     

Hydrocarbon Utilization in Yeast Isolates Found to Grow in Association with Petroleum in a Polluted Ultisol of Midwestern Nigeria

The population counts of hydrocarbon-utilising yeasts weremonitored at six sampling stations in the Benin City municipalarea over a four-week period. Although the population countswere relatively constant in each locality, the highest countsoccurred in areas heavily polluted by domestic and industrialeffluents. A total of thirty-five hydrocarbon-degrading yeastswere isolated from soil at the sampling stations usingn-hexadecane as sole carbon source. The isolates were identifiedas belonging to the genera Candida (27 strains), Endomycopsis (4 strains). All the organisms grew on long-chainn-alkane, kerosene, diesel oil and crude oil but failed to growon short-chain n-alkane, aromatic and alicyclic hydrocarbons.Measurement of growth attributes of the isolates usingn-hexadecane, diesel oil and crude oil as substrates showed thatthe Candida species were better utilizers of hydrocarbonsubstrates relative to Endomycopsis and Schizosaccharomyces species.     

Study of urban atmospheric pollution in Navarre (Northern Spain)

An ambient air quality study was undertaken in two cities (Pamplona and Alsasua) of the Province of Navarre in northern Spain from July 2001 to June 2004. The data were obtained from two urban monitoring sites. At both monitoring sites, ambient levels of ozone, NO_x, and SO₂ were measured. Simultaneously with levels of PM₁₀ measured at Alsasua (using a laser particle counter), PM₁₀ levels were also determined at Pamplona (using a beta attenuation monitor). Mean annual PM₁₀ concentrations in Pamplona and Alsasua reached 30 and 28 μg m⁻³, respectively. These concentrations are typical for urban background sites in Northern Spain. By using meteorological information and back trajectories, it was found that the number of exceedances of the daily PM₁₀ limit as well as the PM₁₀ temporal variation was highly influenced by air masses from North Africa. Although North African transport was observed on only 9% of the days, it contributed the highest observed PM₁₀ levels. Transport from the Atlantic Ocean was observed on 68% of the days; transport from Europe on 13%; low transport and local influences on 7%; and transport from the Mediterranean region on 3% of the days. The mean O₃ concentrations were 45 and 55 μg m⁻³ in Pamplona and Alsasua, respectively, which were above the values reported for the main Spanish cities. The mean NO and NO₂ levels were very similar in both sites (12 and 26 μg m⁻³, respectively). Mean SO₂ levels were 8 μg m⁻³ in Pamplona and 5 μg m⁻³ in Alsasua. Hourly levels of PM₁₀, NO and NO₂ showed similar variations with the typically two coincident maximums during traffic rush hours demonstrating a major anthropogenic origin of PM₁₀, in spite of the sporadic dust outbreaks.     

Assessing health consequences in an environmental impact assessment: The case of Amsterdam Airport Schiphol

In this article a comprehensive approach for the evaluation of possible health effects in an environmental impact assessment (EIA) is described, illustrated with the example of Amsterdam Airport Schiphol. Unlike many EIAs, we estimated quantitatively the impact of aircraft-related pollution in terms of the number of affected people for aircraft noise annoyance, odour annoyance and hypertension. In addition, an analysis of health registry data on cardiovascular and respiratory diseases and a short survey on annoyance and risk perception were carried out. The scope of a health impact assessment depends on the situation, available knowledge and data, concern in the population about the impact and the number of people concerned. It is important to pay attention to the perception of risks and concerns from all parties involved. Moreover, the results demonstrate that far more people outside the area for which standards apply were affected than inside.