Synthesis and kinetics investigation of meso-microporous Cu-SAPO-34 catalysts for the selective catalytic reduction of NO with ammonia

A series of meso-microporous Cu-SAPO-34 catalysts were successfully synthesized by a one-pot hydrothermal crystallization method, and these catalysts exhibited excellent NH_3-SCR performance at low temperature. Their structure and physic chemical properties were characterized by means of X-ray diffraction patterns(XRD), Scanning electron microscopy(SEM), Transmission electron microscopy(TEM), N_2 sorption-desorption, nuclear magnetic resonance(NMR), Inductively Coupled Plasma-Atomic Emission spectrometer(ICP-AES), X-ray absorption spectroscopy(XPS),Temperature-programmed desorption of ammonia(NH_3-TPD), Ultraviolet visible diffuse reflectance spectroscopy(UV-Vis DRS) and Temperature programmed reduction(TPR).The analysis results indicate that the high activities of Cu-SAPO-34 catalysts could be attributed to the enhancement of redox property, the formation of mesopores and the more acid sites. Furthermore, the kinetic results verify that the formation of mesopores remarkably reduces diffusion resistance and then improves the accessibility of reactants to catalytically active sites. The 1.0-Cu-SAPO-34 catalyst exhibited the high NO conversion( 90%) among the wide activity temperature window in the range of 150–425℃.     

The selective catalytic reduction of NO over Ce0.3TiOx-supported metal oxide catalysts

A Ce_(0.3)TiO_xoxide carrier was synthesized via a sol–gel process,and Ce_(0.3)TiO_xsupported metal(M=Cd,Mn,Fe,W,Mo)oxide catalysts were prepared by the method of incipient-wetness impregnation.The catalysts were characterized by means of X-ray diffraction(XRD),Brunauer–Emmett–Teller(BET)analysis,scanning electron microscopy(SEM),transmission electron microscopy(TEM),Fourier transform infrared(FT–IR)spectroscopy,UV–Visdiffusereflectancespectroscopy(UV–VisDRS),and Temperature-programmed reduction with H_2(H_2-TPR).The catalytic activities for de-NO_(x )were evaluated by the NH_3-SCR reaction.Among all the catalysts tested,the 2 wt.%Cd/Ce_(0.3)TiO_xcatalyst exhibited the best NH_3-SCR performance,with a wide temperature window of 250–450°C for NO conversion above 90%.Moreover,the catalyst showed N_2 selectivity greater than 99%from 200 to 450°C.     

Potential ammonia emission from flag leaves of paddy rice (Oryza sativa L. cv. Koshihikari)

The present study aimed to investigate the potential ammonia (NH₃) emission from flag leaves of paddy rice (Oryza sativa L. cv. Koshihikari). The study was conducted at a paddy field in central Japan that was designed as a free-air CO₂ enrichment (FACE) facility for paddy rice. A dynamic chamber method was used to measure the potential NH₃ emissions. The air concentrations of NH₃ at two heights (2 and 6 m from the ground surface) were measured using a filter-pack method, and the exchange fluxes of NH₃ of the whole paddy field were calculated using a gradient method. The flag leaves showed potential NH₃ emissions of 25-38 ng N cm⁻² h⁻¹ in the daytime from the heading to the maturity stages, and they showed potentials of approximately 22 ng N cm⁻² h⁻¹, even in the nighttime, at the heading and mid-ripening stages. The exchange fluxes of NH₃ of the whole paddy field in the daytime were net emissions of 0.9-3.9 g N ha⁻¹ h⁻¹ whereas the exchange fluxes of NH₃ in the nighttime were approximately zero.     

Effect of MoO3 on vanadium based catalysts for the selective catalytic reduction of NOx with NH3 at low temperature

The selective catalytic reduction(SCR) activities of the MoO_3 doped V/WTi catalysts prepared by the incipient wetness impregnation method at low temperature were investigated.The results showed that the addition of MoO_3 could enhance the NO_ xconversion at low temperature and the best SCR activity was obtained when the dosage of MoO_3 reached5 wt.%. The NH3-TPD and DRIFTS experiments indicated that the addition of MoO_3 changed the type and number of acid sites on the surface of catalysts and reaction activities of acid sites were altered at the same time. The redox capacity and amount of active oxygen species got improved for V3Mo5/WTi catalyst, which could be confirmed by the H_2-TPR and transient response experiments. Water vapor inhibited the NO_xconversion at low temperature. Deposition of ammonium sulfate or bisulfate might be main reason for the loss of catalytic activity in the presence of SO_2 at low temperature. Choosing the suitable NH_3/NO ratio and elevation of reaction temperature both could weaken the influence of SO_2 on the SCR activity of the V3Mo5/WTi catalyst. Thermal treatment of the deactivated catalyst at350°C could get the low temperature activity recovered. The decrease of GHSV improved the de NO_x efficiency at low temperature and we speculated that the rational technological process and operation parameters could contribute to the application of this kind of catalysts in real industrial environment.     

Effects of synthesis methods on catalytic activities of CoOx–TiO2 for low-temperature NH3-SCR of NO

A series of cobalt doped TiO_2(Co-TiO_2) and Co Oxloaded TiO_2(Co/TiO_2) catalysts prepared by sol–gel and impregnation methods respectively were investigated on selective catalytic reduction with NH_3(NH_3-SCR) of NO. It was found that Co-TiO_2 catalyst showed more preferable catalytic activity at low temperature range. From characterization results of XRD,TEM, Raman and FT-IR, Co species were proved to be doped into TiO_2 lattice by replaced Ti atoms. After being characterized and analyzed by NH_3-TPD, PL, XPS, EPR and DRIFTS, it was found that the better NH_3-SCR activities of Co-TiO_2 catalysts, compared with Co/TiO_2 catalyst, were ascribed to the formation of more oxygen vacancies which further promoted the production of more superoxide ions(O-2). The superoxide ions were crucial for the formation of low temperature SCR reaction intermediates(NO-3) by reacting with adsorbed NO molecule. Therefore, these aspects were responsible for the higher low temperature NH_3-SCR activity of Co-TiO_2 catalysts.     

Oxidation of diesel soot on binary oxide CuCr(Co)-based monoliths

Binary oxide systems (CuCr₂O₄, CuCo₂O₄), deposited onto cordierite monoliths of honeycomb structure with a second support (finely dispersed Al₂O₃), were prepared as filters for catalytic combustion of diesel soot using internal combustion engine's gas exhausts (O₂, NO_x, H₂O, CO₂) and O₃ as oxidizing agents. It is shown that the second support increases soot capacity of aforementioned filters, and causes dispersion of the particles of spinel phases as active components enhancing thereby catalyst activity and selectivity of soot combustion to CO₂. Oxidants used can be arranged with reference to decreasing their activity in a following series: O₃ ? NO₂ > H₂O > NO > O₂ > CO₂. Ozone proved to be the most efficient oxidizing agent: the diesel soot combustion by O₃ occurs intensively (in the presence of copper chromite based catalyst) even at closing to ambient temperatures. Results obtained give a basis for the conclusion that using a catalytic coating on soot filters in the form of aforementioned binary oxide systems and ozone as the initiator of the oxidation processes is a promising approach in solving the problem of comprehensive purification of automotive exhaust gases at relatively low temperatures, known as the “cold start” problem.     

CuO/ZSM-5系列催化剂的脱硫脱硝性能研究

采用浸渍法制备了不同质量分数的催化剂x％ CuO/ZSM-5 (x =2、4、6、8、10、12、50),并考察了其在CH4为还原剂条件下的脱硫脱硝性能.同时,采用X射线衍射(XRD)、H2-程序升温还原(H2-TPR)、NH3-程序升温脱附(NH3-TPD)、比表面积(BET)、扫描电子显微镜与能谱分析(SEM-EDS)等测试手段对催化剂进行表征.实验结果表明:10％ CuO/ZSM-5催化剂的活性组分具有较好的晶型结构,且高度分散在ZSM-5骨架中.在CH4+NO+ SO2反应中,10％ CuO/ZSM-5催化剂具有最好的脱硫脱硝活性,最高脱硫率和脱硝率分别为97.4％和94.6％.     

Effect of Ce doping of TiO2 support on NH3-SCR activity over V2O5-WO3/CeO2-TiO2 catalyst

CeO2–TiO2composite supports with different Ce/Ti molar ratios were prepared by a homogeneous precipitation method, and V2O5–WO3/CeO2–TiO2catalysts for the selective catalytic reduction（SCR） of NOx with NH3 were prepared by an incipient-wetness impregnation method. These catalysts were characterized by means of BET, XRD, UV–Vis,Raman and XPS techniques. The results showed that the catalytic activity of V2O5–WO3/TiO2 was greatly enhanced by Ce doping（molar ratio of Ce/Ti = 1/10） in the TiO2 support.The catalysts that were predominantly anatase TiO2 showed better catalytic performance than the catalysts that were predominantly fluorite CeO2. The Ce additive could enhance the surface adsorbed oxygen and accelerate the SCR reaction. The effects of O2 concentration, ratio of NH3/NO, space velocity and SO2 on the catalytic activity were also investigated. The presence of oxygen played an important role in NO reduction. The optimal ratio of NH3/NO was 1/1 and the catalyst had good resistance to SO2 poisoning.     

Structures and catalytic performances of Me/SAPO-34 (Me = Mn, Ni, Co) catalysts for low-tem perature SCR of NOx by ammonia

Me/SAPO-34 (Me = Mn, Ni, Co) series of catalysts were prepared by a wetness impregnation method and investigated for the selective catalytic reduction of nitrogen oxides with ammonia (NH₃-SCR). Among them, Mn/SAPO-34 catalyst was found as the most promising candidate based on its superior low-temperature activity. The catalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy images (TEM), nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS), temperature programmed reduction and desorption (TPR and TPD), and diffuse reflectance infrared Fourier transformed spectroscopy (DRIFTS) of NH₃/NO_x adsorption. Mn/SAPO-34 is obviously different from Ni/SAPO-34 and Co/SAPO-34 in the active species state and distribution. Surface MnO_x species which play an essential role in NO oxidation and NO₂ adsorption, act as better active sites than nickel and cobalt mostly in the form of the aluminates and silicates.     

Effects of WOx modification on the activity, adsorption and redox properties of CeO2 catalyst for NOx reduction with ammonia

A series of WO₃/CeO₂ (WOx/CeO₂) catalysts were synthesized by wet impregnation of ammonium metatungstate on a CeO₂ support. The resulting solid acid catalysts were characterized by X-ray diffraction (XRD), UV-Vis spectroscopy (UV-Vis), Raman spectroscopy (Raman), in-situ Fourier transform infrared spectroscopy (in-situ FT-IR) of ammonia adsorption, NH₃-TPD, H₂ temperature-programmed reduction (H₂-TPR), NH₃/NO oxidation and activity measurements for NOx reduction by NH₃ (NH₃-SCR). The results show that polytungstate (WOx) species are the main species of tungsten oxide on the surface of ceria. The addition of tungsten oxide enhances the Brönsted acidity of ceria catalysts remarkably and decreases the amount of surface oxygen on ceria, with strong interaction between CeO₂ and WOx. As a result, the N₂ selectivity of NH₃ oxidation and NH₃-SCR at high temperatures (> 300℃) is enhanced. Therefore, a wide working temperature window in which NOx conversion exceeds 80% (NOx conversion > 80%) from 200 to 450℃, is achieved over 10 wt.% WOx/CeO₂ catalyst. A tentative model of the NH₃-SCR reaction route on WOx/CeO₂ catalysts is presented.     

Pd/Ce0.5Zr0.5O2三效催化剂负载方法

分别采用沉积沉淀、直接混合和传统的浸渍法制备1% Pd/Ce_0.5Zr_0.5O₂ 催化剂, 研究了Pd负载方法对催化剂活性影响.运用H₂-TPR和原位漫反射红外(DRIFTS)研究了Pd-铈锆载体间的相互作用及Pd/Ce_0.5Zr_0.5O₂催化剂上的三效反应机理.结果表明沉积沉淀法制备的Pd/Ce_0.5Zr_0.5O₂催化剂(Pd-DP)表现出最强的Pd-载体作用及最优活性,原位红外实验发现Pd-DP上存在与传统的浸渍法制备的Pd-IMP催化剂不同的NO催化还原途径,推测Pd-载体间相互作用引起NO还原机理差异,进而导致活性差异.     

Urease inhibitor reduces N losses and improves plant-bioavailability of urea applied in fine particle and granular forms under field conditions

A field lysimeter/mini plot experiment was established in a silt loam soil near Lincoln, New Zealand, to investigate the effectiveness of urea fertilizer in fine particle application (FPA), with or without the urease inhibitor N-(n-butyl) thiophosphoric triamide (NBPT - “Agrotain”), in decreasing nitrogen (N) losses and improving N uptake efficiency. The five treatments were: control (no N) and ¹⁵N-labelled urea, with or without NBPT, applied to lysimeters or mini plots (unlabelled urea), either in granular form to the soil surface or in FPA form (through a spray) at a rate equivalent to 100 kg N ha⁻¹. Gaseous emissions of ammonia (NH₃) and nitrous oxide (N₂O), nitrate (NO₃⁻) leaching, herbage dry-matter (DM) production, N-response efficiency, total N uptake and total recovery of applied ¹⁵N in the plant and soil varied with urea application method and with addition of NBPT. Urea with NBPT, applied in granular or FPA form, was more effective than in application without NBPT: N₂O emissions were reduced by 7-12%, NH₃ emissions by 65-69% and NO₃⁻ leaching losses by 36-55% compared with granular urea. Urea alone and with NBPT, applied in FPA form increased herbage DM production by 27% and 38%, respectively. The N response efficiency increased from 10 kg DM kg⁻¹ of applied N with granular urea to 19 kg DM kg⁻¹ with FPA urea and to 23 kg DM kg⁻¹ with FPA urea plus NBPT. Urea applied in FPA form resulted in significantly (P < 0.05) higher ¹⁵N recovery in the shoots compared with granular treatments and this was improved further when urea in FPA form was applied with NBPT. These results suggest that applying urea with NBPT in FPA form has potential as a management tool in mitigating N losses, improving N-response efficiency and increasing herbage DM production in intensive grassland systems.     

Roles of SO2 oxidation in new particle formation events

The oxidation of SO₂ is commonly regarded as a major driver for new particle formation (NPF) in the atmosphere. In this study, we explored the connection between measured mixing ratio of SO₂ and observed long-term (duration > 3 hr) and short-term (duration <1.5 hr) NPF events at a semi-urban site in Toronto. Apparent NPF rates (J₃₀) showed a moderate correlation with the concentration of sulfuric acid ([H₂SO₄]) calculated from the measured mixing ratio of SO₂ in long-term NPF events and some short-term NPF events (Category I) (R² = 0.66). The exponent in the fitting line of J₃₀ ~ [H₂SO₄]ⁿ in these events was 1.6. It was also found that SO₂ mixing ratios varied a lot during long-term NPF events, leading to a significant variation of new particle counts. In the SO₂-unexplained short-term NPF events (Category II), analysis showed that new particles were formed aloft and then mixed down to the ground level. Further calculation results showed that sulfuric acid oxidized from SO₂ probably made a negligible contribution to the growth of >10 nm new particles.     

Roles of SO2 oxidation in new particle formation events

The oxidation of SO₂ is commonly regarded as a major driver for new particle formation (NPF) in the atmosphere. In this study, we explored the connection between measured mixing ratio of SO₂ and observed long-term (duration > 3 hr) and short-term (duration < 1.5 hr) NPF events at a semi-urban site in Toronto. Apparent NPF rates (J₃₀) showed a moderate correlation with the concentration of sulfuric acid ([H₂SO₄]) calculated from the measured mixing ratio of SO₂ in long-term NPF events and some short-term NPF events (Category I) (R² = 0.66). The exponent in the fitting line of J₃₀ ~ [H₂SO₄]ⁿ in these events was 1.6. It was also found that SO₂ mixing ratios varied a lot during long-term NPF events, leading to a significant variation of new particle counts. In the SO₂-unexplained short-term NPF events (Category II), analysis showed that new particles were formed aloft and then mixed down to the ground level. Further calculation results showed that sulfuric acid oxidized from SO₂ probably made a negligible contribution to the growth of > 10 nm new particles.     

Particulate matter assessment of a wetland in Beijing

To increase the knowledge on the particulate matter of a wetland in Beijing, an experimental study on the concentration and composition of PM₁₀ and PM_2.5 was implemented in Beijing Olympic Forest Park from 2013 to 2014. This study analyzed the meteorological factors and deposition fluxes at different heights and in different periods in the wetlands. The results showed that the mean mass concentrations of PM₁₀ and PM_2.5 were the highest at 06:00–09:00 and the lowest at 15:00–18:00. And the annual concentration of PM₁₀ and PM_2.5 in the wetland followed the order of dry period (winter) > normal water period (spring and autumn) > wet period (summer), with the concentration in the dry period significantly higher than that in the normal water and wet periods. The chemical composition of PM_2.5 in the wetlands included NH₄⁺, K⁺, Na⁺, Mg^2 +, SO₄^2 −, NO₃⁻, and Cl⁻, which respectively accounted for 12.7%, 1.0%, 0.8%, 0.7%, 46.6%, 33.2%, and 5.1% of the average annual composition. The concentration of PM₁₀ and PM_2.5 in the wetlands had a significant positive correlation with relative humidity, a negative correlation with wind speed, and an insignificant negative correlation with temperature and radiation. The daily average dry deposition amount of PM₁₀ in the different periods followed the order of dry period > normal water period > wet period, and the daily average dry deposition amount of PM_2.5 in the different periods was dry period > wet period > normal water period.     

Optimizing the crystallinity and acidity of H-SAPO-34 by fluoride for synthesizing Cu/SAPO-34 NH3-SCR catalyst

A series of H-SAPO-34 zeolites were synthesized by a hydrothermal method in fluoride media. The as-synthesized H-SAPO-34 zeolites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), N₂ physisorption, temperature-programmed desorption of NH₃ (NH₃-TPD) and nuclear magnetic resonance (NMR) measurements. The results showed that a certain concentration of F⁻ anions promoted the nucleation and crystallization of H-SAPO-34. The H-SAPO-34 synthesized in the fluoride media showed high crystallinity, uniform particle size distribution, large specific surface area and pore volume, and enhanced acidity. Therefore, Cu/SAPO-34 based on the fluoride-assisted zeolite showed a broadened temperature window for the selective catalytic reduction of NO by NH₃ (NH₃-SCR) reaction due to the enhanced acidity of the zeolite and the improved dispersion of copper species.     

Adsorption and desorption of SO2, NO and chlorobenzene on activated carbon

Activated carbon (AC) is very effective for multi-pollutant removal; however, the complicated components in flue gas can influence each other''s adsorption. A series of adsorption experiments for multicomponents, including SO₂, NO, chlorobenzene and H₂O, on AC were performed in a fixed-bed reactor. For single-component adsorption, the adsorption amount for chlorobenzene was larger than for SO₂ and NO on the AC. In the multi-component atmosphere, the adsorption amount decreased by 27.6% for chlorobenzene and decreased by 95.6% for NO, whereas it increased by a factor of two for SO₂, demonstrating that a complex atmosphere is unfavorable for chlorobenzene adsorption and inhibits NO adsorption. In contrast, it is very beneficial for SO₂ adsorption. The temperature-programmed desorption (TPD) results indicated that the binding strength between the gas adsorbates and the AC follows the order of SO₂ > chlorobenzene > NO. The adsorption amount is independent of the binding strength. The presence of H₂O enhanced the component effects, while it weakened the binding force between the gas adsorbates and the AC. AC oxygen functional groups were analyzed using TPD and X-ray photoelectron spectroscopy (XPS) measurements. The results reveal the reason why the chlorobenzene adsorption is less affected by the presence of other components. Lactone groups partly transform into carbonyl and quinone groups after chlorobenzene desorption. The chlorobenzene adsorption increases the number of C = O groups, which explains the positive effect of chlorobenzene on SO₂ adsorption and the strong NO adsorption.     

Removal of Cs from water and soil by ammonium-pillared montmorillonite/Fe3O4 composite

To remove cesium ions from water and soil, a novel adsorbent was synthesized by following a one-step co-precipitation method and using non-toxic raw materials. By combining ammonium-pillared montmorillonite (MMT) and magnetic nanoparticles (Fe₃O₄), an MMT/Fe₃O₄ composite was prepared and characterized. The adsorbent exhibited high selectivity of Cs⁺ and could be rapidly separated from the mixed solution under an external magnetic field. Above all, the adsorbent had high removal efficiency in cesium-contaminated samples (water and soil) and also showed good recycling performance, indicating that the MMT/Fe₃O₄ composite could be widely applied to the remediation of cesium-contaminated environments. It was observed that the pH, solid/liquid ratio and initial concentration affected adsorption capacity. In the presence of coexisting ions, the adsorption capacity decreased in the order of Ca^2 + > Mg^2 + > K⁺ > Na⁺, which is consistent with our theoretical prediction. The adsorption behavior of this new adsorbent could be expressed by the pseudo-second-order model and Freundlich isotherm. In addition, the adsorption mechanism of Cs⁺ was NH₄⁺ ion exchange and surface hydroxyl group coordination, with the former being more predominant.     

CO2 sequestration utilizing basic-oxygen furnace slag: Controlling factors, reaction mechanisms and V–Cr concerns

Basic-oxygen furnace slag(BOF-slag) contains 35%CaO,a potential component for CO_2sequestration.In this study,slag-water-CO_2 reaction experiments were conducted with the longest reaction duration extending to 96 hr under high CO_2 pressures of 100-300 kg/cm2 to optimize BOF-slag carbonation conditions,to address carbonation mechanisms,and to evaluate the extents of V and Cr release from slag carbonation.The slag carbonation degree generally reached the maximum values after 24 hr slag-water-CO_2 reaction and was controlled by slag particle size and reaction temperature.The maximum carbonation degree of 71%was produced from the experiment using fine slag of0.5 mm under 100℃and a CO_2 pressure of 250 kg/cm~2 with a water/slag ratio of 5.Vanadium release from the slag to water was significantly enhanced(generally 2 orders) by slag carbonation.In contrast,slag carbonation did not promote chromium release until the reaction duration exceeded 24 hr.However,the water chromium content was generally at least an order lower than the vanadium concentration,which decreased when the reaction duration exceeded 24 hr.Therefore,long reaction durations of 48-96 hr are proposed to reduce environmental impacts while keeping high carbonation degrees.Mineral textures and water compositions indicated that Mg-wustite,in addition to CaO-containing minerals,can also be carbonated.Consequently,the conventional expression that only considered carbonation of the CaO-containing minerals undervalued the CO_2 sequestration capability of the BOF-slag by~20%.Therefore,the BOF-slag is a better CO_2 storage medium than that previously recognized.     

Spatial and temporal distribution of cyanobacteria in Batticaloa Lagoon

The necessity to understand the relationship between cyanobacterial species abundance and water quality variations in coastal lagoons is crucial to develop strategies to prevent further cyanobacterial proliferation. This paper evaluates the relationship between water quality variations on the distribution of cyanobacteria during a 12-month period in Batticaloa Lagoon (Sri Lanka) using Redundancy analysis and Pearson correlations. Drastic variations in pH, temperature, salinity, dissolved oxygen (DO) and total phosphorus (TP) levels were reported, but not turbidity and NO₃⁻. This brackish waterbody is hypereutrophic (TP levels > 0.1 mg/L). The cyanobacterial community contained 13 genera and 22 species. NO₃⁻, TP and turbidity levels positively influenced cyanobacterial abundance during all seasons indicating that nutrient (largely phosphorus) and sediment entry control is highly crucial along with periodic monitoring of cyanobacterial growth.