Demonstrating the In Situ Biodegradation Potential of Phenol Using Bio‐Sep® Bio‐Traps® and Stable Isotope Probing

The effect of phenol concentration on phenol biodegradation at an industrial site in the south of Wales, United Kingdom, was investigated using standard Bio‐Sep^® Bio‐Traps^® and Bio‐Traps^® coupled with stable isotope probing (SIP). Unlike many ¹³C‐amendments used in SIP studies (such as hydrocarbons) that physically and reversibly adsorb to the activated carbon component of the Bio‐Sep^® beads, phenol is known to irreversibly chemisorb to activated carbon. Bio‐Traps^® were deployed for 32 days in nine site groundwater monitoring wells representing a wide range of phenol concentrations. Bio‐Traps^® amended with ¹³C‐phenol were deployed together with non‐amended Bio‐Traps® in three wells. Quantitative polymerase chain reaction (qPCR) analysis of Bio‐Traps^® post‐deployment indicated an inhibitory effect of increasing phenol concentration on both total eubacteria and aerobic phenol‐utilizing bacteria as represented by the concentration of phenol hydroxylase gene. Despite the chemisorption of phenol to the Bio‐Sep^® beads, activated carbon stable isotope analysis showed incorporation of ¹³C into biomass and dissolved inorganic carbon (DIC) in each SIP Bio‐Trap^® indicating that chemisorbed amendments are bioavailable. However, there was a clear effect of phenol concentration on ¹³C incorporation in both biomass and DIC confirming phenol inhibition. These results suggest that physical reductions of the phenol concentrations in some areas of the plume will be required before biodegradation of phenol can proceed at a reasonable rate. © 2013 Wiley Periodicals, Inc.     

Use of bio‐traps with multiple substrates and electron acceptors to optimize remediation

Bio‐Traps® were used to investigate biodegradation of benzene, methyl tertiary butyl ether (MTBE), and tertiary butyl alcohol (TBA) under different conditions at a fractured rock site to aid the selection of a bioremediation approach. The Bio‐Traps were amended with the ¹³C‐labeled constituent of interest and sampled sequentially at 15‐, 30‐, 60‐, and 90‐day intervals. The conditions tested were biodegradation during operation of an air sparge system, amendment with nitrate during the air sparge operation, anaerobic biodegradation with the system turned off, and anaerobic biodegradation with nitrate amendment. There was increased biomass with nitrate amendment whether the air sparge system was on or off for all the constituents of interest. The diversity of the microbial community, determined by phospholipid fatty acid analysis, decreased with nitrate amendment as more specialized degraders were selected. The most negative indicators of potential biodegradation performance were observed with the anaerobic control. There was less biomass overall, less incorporation of ¹³C into biomass, and decreased membrane permeability. As testing with additional amendments continues at the site, it is not yet certain which treatment might be selected for bioremediation, but the Bio‐Trap tests thus far have identified that the in situ, natural attenuation condition is least favorable for biodegradation. © 2009 Wiley Periodicals, Inc.     

A Novel Approach to Biological Treatment of Contaminated Water

Over the past few years, the focus of our research has been to respond to the recognized needs for novel biological processes that are capable of destroying a wide range of biodegradable pollutants and providing the perfect environment for complex interspecies interactions required for the degradation of environmental contaminants. A new biotechnology process called Biological Permeable Barrier (BPB) was developed to provide high microbial density, stable environmental conditions, and protective measures for microbial activities for in‐situ bioremediation of contaminated groundwater. This patented technology (U.S. Patent 6,337,019 ) is based on the creation of a structured matrix, or Bio‐beads, that provides the perfect environment for organic‐degrading microorganisms to establish biofilms capable of destroying the contaminants in water with remarkable stability and control. For over 240 days, the viability and performance of the BPB (Bio‐beads) system were shown for biodegradation of a targeted contaminant, 2,4,6‐ trichlorophenol (TCP), under a variety of operating and stress conditions (Razavi‐Shirazi, 1997 ). Extensive batch experiments were also conducted to obtain necessary data to determine the rate of TCP diffusion into the Bio‐beads, adsorption properties of the Bio‐beads, and substrate‐use rate of the mixed bioculture as free cells and as immobilized cells (Bio‐beads). A simulated model of BPB was also characterized with its porosity, permeability, and compressibility or deformation under typical field conditions. Our extensive research showed that BPB takes advantage of a controlled biotechnology process to overcome the disadvantages and uncertainties associated with conventional biological processes. A summary of our investigation is presented here. © 2002 Wiley Periodicals, Inc.     

Integrated approach to PCE‐impacted site characterization,site management,and enhanced bioremediation

Tetrachloroethene (PCE)‐ and trichloroethene (TCE)‐impacted sites pose significant challenges even when site characterization activities indicate that biodegradation has occurred naturally. Although site‐specific, regulatory, and economic factors play roles in the remedy‐selection process, the application of molecular biological tools to the bioremediation field has streamlined the assessment of remedial alternatives and allowed for detailed evaluation of the chosen remedial technology. The case study described here was performed at a PCE‐impacted site at which reductive dechlorination of PCE and TCE had led to accumulation of cis‐dichlorethene (cis‐DCE) with concentrations ranging from approximately 10 to 100 mg/L. Bio‐Trap® samplers and quantitative polymerase chain reaction (qPCR) enumeration of Dehalococcoides spp. were used to evaluate three remedial options: monitored natural attenuation, biostimulation with HRC®, and biostimulation with HRC‐S®. Dehalococcoides populations in HRC‐S‐amended Bio‐Traps deployed in impacted wells were on the order of 10³ to 10⁴ cells/bead but were below detection limits in most unamended and HRC‐amended Bio‐Traps. Thus the in situ Bio‐Trap study identified biostimulation with HRC‐S as the recommended approach, which was further evaluated with a pilot study. After the pilot HRC‐S injection, Dehalococcoides populations increased to 10⁶ to 10⁷ cells/bead, and concentrations of cis‐DCE and vinyl chloride decreased with concurrent ethene production. Based on these results, a full‐scale HRC‐S injection was designed and implemented at the site. As with the pilot study, full‐scale HRC‐S injection promoted growth of Dehalococcoides spp. and stimulated reductive dechlorination of the daughter products cis‐DCE and vinyl chloride. © 2008 Wiley Periodicals, Inc.     

Concurrent and Complete Anaerobic Reduction and Microaerophilic Degradation of Mono‐, Di‐, and Trichlorobenzenes

Bio‐Trap^®–based in situ microcosm studies were conducted to evaluate EHC‐M^® stimulated degradation of mono‐, di‐, and trichlorobenzenes in anaerobic groundwater at a site in Michigan. The data show that the EHC‐M^® amendment stimulated an overall increase in microbial activity and a shift in the microbial community structure, indicating more reduced conditions. Stable isotope probing with ¹³C₆‐chlorobenzene demonstrated attenuation of chlorobenzene and subsequent separation and characterization of the ¹²C‐ and ¹³C‐deoxyribonucleic acid (DNA) fractions were used to identify the attenuating microbes. These data clearly show the participation of an obligate aerobe in the chlorobenzene biodegradation process. Decreases in concentrations of trichlorobenzenes were also observed in comparison to a control. Due to the thermodynamically favorable reducing conditions stimulated by EHC‐M^®, the mechanism of degradation of the trichlorobenzenes is presumed to be reductive dehalogenation. However, on the strength of the DNA‐based analysis of microbial community structure, concurrent microaerophilic degradation of chlorobenzene or its metabolites was definitively demonstrated and cannot be ruled out for the other chlorobenzenes. © 2013 Wiley Periodicals, Inc.     

Degradation of a Terephthalate-containing Polyester by Thermophilic Actinomycetes and <Emphasis Type="Italic">Bacillus</Emphasis> Species Derived from Composts

We intended to find thermophilic degraders of terephthalate-containing Biomax^® films. Films in mesh bags were buried in composts (inside temperature: approximately 55–60 °C), resulting in the degradation of them in 2 weeks. Fluorescent microscopy of films recovered from composts showed that microorganisms gradually covered the surface of a film during composting. DGGE analysis of microorganisms on the composted film indicated the presence of Bacillus species as main species (approximately 80% of microbial flora) and actinomycetes (approximately 10–20%) as the second major flora. Isolation of Biomax^®-utilizing bacteria was focused on these two genera: two actinomycetes and one Bacillus species were isolated as pure best degraders from the composted polymer films, which were fragmented into small pieces. All the strains were thermophilic and identified, based on their 16S rDNA analyses. Degradation of polymer films was confirmed by (1) accelerated fragmentation of films in composts, compared with a control (no inoculum) and resultant decrease in molecular weights, (2) growth in a powdered Biomax^® medium, compared with a control without powdered Biomax^®, and (3) production of terephthalate in a powdered Biomax^® medium. In this way, we concluded that these bacteria were useful for degradation of thermostable Biomax^® products.     

Aerobic Biodegradation of Hydrocarbons in High Temperature and Saline Groundwater

A series of laboratory microcosm experiments and a field pilot test were performed to evaluate the potential for aerobic biodegradation of aromatic hydrocarbons and methyl tert‐butyl ether (MtBE; a common oxygenate additive in gasoline) in saline, high temperature (>30° C) groundwater. Aquifer, sediment, and groundwater samples from two sites, one in Canada and another in Saudi Arabia, were incubated for 106 days to evaluate the changes in select hydrocarbon and MtBE concentrations and microbial community structure. Almost complete biodegradation of the aromatic hydrocarbons was found in the Saudi Arabian microcosm samples whereas the Canadian microcosm samples showed no significant biodegradation during the laboratory testing. MtBE degradation was not observed in either set of microcosms. Denaturing gradient gel electrophoresis analyses showed that, while the Canadian microorganisms were the most diverse, they showed little response during incubation. The microbial communities for the Saudi Arabian sample contained significant numbers of microorganisms capable of hydrocarbon degradation which increased during incubation. Based on the laboratory results, pilot‐scale testing at the Saudi Arabian field site was carried out to evaluate the effectiveness of enhanced aerobic biodegradation on a high temperature, saline petroleum hydrocarbon plume. Dissolved oxygen was delivered to the subsurface using a series of oxygen diffusion emitters installed perpendicular to groundwater flow, which created a reactive zone. Results obtained from the seven‐month field trial indicated that all the target compounds decreased with removal percentages varying between 33 percent for the trimethylbenzenes to greater than 80 percent for the BTEX compounds. MtBE decreased 40 percent on average whereas naphthalene was reduced 85 percent on average. Examination of the microbial population upgradient and downgradient of the emitter reactive zone suggested that the bacteria population went from an anaerobic, sulfate‐reducing dominated population to one dominated by a heterotrophic aerobic bacteria dominant population. These studies illustrate that field aerobic biodegradation may exceed expectations derived from simple laboratory microcosm experiments. Also, high salinity and elevated groundwater temperature do not appear to inhibit in situ aerobic biorestoration. © 2014 Wiley Periodicals, Inc.     

Potential for bioremediation of the perchlorate‐contaminated sediments in the Las Vegas Wash area,Henderson, Nevada

This study investigates the potential for perchlorate biodegradation in the sediments of the Las Vegas Wash area in Henderson, Nevada. The continuous transport of perchlorate from a contaminated seepage to the Las Vegas Wash, Lake Mead, and the Colorado River has resulted in considerable deposition of perchlorate along the sediments of the Las Vegas Wash. The contaminated sediments act as a distributed source of perchlorate, making efforts to stop the flow of perchlorate to the Colorado River very challenging. In this study, perchlorate‐ reducing bacteria were enumerated and microcosm tests were performed to investigate the role of indigenous microorganisms and the limitations to natural perchlorate biodegradation in the contaminated sediments. The results of microcosm tests revealed that, despite the high number of perchloratereducing bacteria present, natural perchlorate in the area appears to be limited by (1) high salinity levels, the presence of nitrate, and the low perchlorate concentrations present in the sediments and (2) an insufficient carbon source. However, the potential for in situ bioremediation of the sediments along the Wash area is considered to be high due to the presence of significant numbers of perchlorate‐ reducing bacteria and to the ease in which an additional carbon source could be provided to sustain nitrate and perchlorate biodegradation. The economics of this process are expected to be very favorable; however, detailed cost estimates, pilot‐scale testing, and permit applications are required before this concept can be applied. © 2005 Wiley Periodicals, Inc.     

Degradation of a Terephthalate-containing Polyester by a Thermophilic Microbial Consortium

Biomax^® is an aliphatic-aromatic polyester. The biodegradability of Biomax^® was studied at 58 °C using a laboratory scale bioreactor. The bioreactor was inoculated with bacteria derived from compost and supplemented with powdered Biomax^® and an additional energy source. After a period of acclimation, the microorganisms in the bioreactor were capable of metabolizing the major components of the polymer, i.e., TPA and ethylene glycol. TPA and ethylene glycol were detected in the bioreactor only when they were added. Degradation and disintegration of the powdered Biomax^® was monitored by laser diffraction. The particle size distribution of the powdered polymer progressively shifted toward smaller sizes until the diameters of the polymer particles were indistinguishable from bacteria. The types of microbes in the bioreactor were determined by analyzing 16S rRNA gene sequences. The bacteria belonged to 35 different groups, and the majority of the bacteria appeared to represent new species.     

A research note on the assessment of optimum conditions for preparing soils for bioremediation feasibility testing

In this applied study, the effects of short‐term storage at 22°C, 6°C, and ?25°C on the numbers of microorganisms enumerated were examined with soils collected from a petrochemical contaminated soil containing multiple contaminants including phenol, polycyclic aromatic hydrocarbons, and petroleum hydrocarbons. Short term storage of soils at refrigerator temperature did not significantly change the number of microorganisms compared to those in the fresh soil (0 days of storage); however, at ?25°C there was a slight decrease in the phenol utilizers and total viable count (TVC). Long‐term storage caused a significant decrease in the number of phenol utilizers in the petrochemical‐contaminated soil samples. Chemical dispersing agents were used in an attempt to increase the extraction of microorganisms from naphthalene contaminated soil which were predominantly clay soils. These did not significantly change the enumeration of naphthalene utilizers or TVC. While these results are not unexpected from current research and knowledge of microbial community succession in laboratory environments, the results from the applied nature of this study confirm that it is best practice to keep soil samples designated for bacterial enumeration for the shortest possible time, and not longer than 1–2 weeks, and at refrigerated temperature (6°C) in preference to room (22°C) or deep freezer (?18°C) temperatures.     

Microbial responses to in situ chemical oxidation,six‐phase heating,and steam injection remediation technologies in groundwater

The evaluation of microbial responses to three in situ source removal remedial technologies—permanganate‐based in situ chemical oxidation (ISCO), six‐phase heating (SPH), and steam injection (SI)—was performed at Cape Canaveral Air Station in Florida. The investigation stemmed from concerns that treatment processes could have a variety of effects on the indigenous biological activity, including reduced biodegradation rates and a long‐term disruption of community structure with respect to the stimulation of TCE (trichloroethylene) degraders. The investigation focused on the quantity of phospholipid fatty acids (PLFAs) and its distribution to determine the immediate effect of each remedial technology on microbial abundance and community structure, and to establish how rapidly the microbial communities recovered. Comprehensive spatial and temporal PLFA screening data suggested that the technology applications did not significantly alter the site's microbial community structure. The ISCO was the only technology found to stimulate microbial abundance; however, the biomass returned to predemonstration values shortly after treatment ended. In general, no significant change in the microbial community composition was observed in the SPH or SI treatment areas, and even small changes returned to near initial conditions after the demonstrations. © 2004 Wiley Periodicals, Inc.     

A research note on the recalcitrance of carbon dioxide gas scrubbing compounds to biodegradation processes

A laboratory study was conducted to determine the feasibility of biotreatment of liquid Sulfinol waste stored at a gas treatment facility. Sulfinol is used to scrub impurities from gas generated from both traditional gas extraction and that from hydraulic fracturing processes. Chemical characterization and microbiological assessment showed that cultures of Sulfinol‐degrading microorganisms could be enriched from Sulfinol‐contaminated soil containing saturated concentrations of Sulfinol: a mixture of di‐isopropanolamine (DiPA), sulfolane, and oxazolidone. Based on this initial finding from the enrichment culture study, batch reactors were incubated with inoculants from enrichment cultures containing known numbers of presumptive Sulfinol‐degrading microorganisms. The microbial analyses of liquors from batch reactors showed microbial inhibition and/or loss of viability due to Sulfinol toxicity, even at the lowest Sufinol waste concentration used (5 percent of the original waste). The changes in concentrations of the chemicals in the batch reactor trials were a result of chemical rather than biodegradation processes. Further research is recommended to develop repeatable strategies for biodegrading the constituents of Sulfinol under field conditions.     

Effects of physicochemical factors on PAH degradation by Planomicrobium alkanoclasticum

Polycyclic aromatic hydrocarbons (PAHs) are environmental pollutants that are mutagenic, carcinogenic, and toxic to living organisms. Here, the ability and effectiveness of selected bacteria isolated from an oil‐contaminated area in biodegrading PAHs were evaluated, and the optimal conditions conducive to bacterial PAH biodegradation were determined. Of six bacterial isolates identified based on their 16S rRNA sequences, Planomicrobium alkanoclasticum could subsist on and consume nearly all hydrocarbons according to the 2,6‐dichlorophenolindophenol assay. The efficacy of this isolate at PAH biodegradation was then empirically confirmed. After 30 days of incubation, P. alkanoclasticum degraded 90.8% of the 16 PAH compounds analyzed and fully degraded eight of them. The optimum P. alkanoclasticum growth conditions were 35°C, pH 7.5, and NaNO₃ as the nitrogen source. Under these biostimulant conditions, P. alkanoclasticum degraded 91.4% of the total PAH concentration and completely decomposed seven PAHs after 15 days incubation. Hence, P. alkanoclasticum is an apt candidate for the biodegradation of PAHs and the bioremediation of sites contaminated by them.     

Long-Term Maintenance of Rapid Atrazine Degradation in Soils Inoculated with Atrazine Degraders

Two different microbial communities able to degrade atrazine (atz) were inoculated in four different soils. The most critical factor affecting the success of inoculation was the soil pH and its organic matter (OM) content. In two alkaline soils (pH > 7), some inoculations led immediately to a strong increase of the biodegradation rate. In a third slightly acidic soil (pH = 6.1), only one inoculum could enhance atz degradation. In a soil amended with organic matter and straw (pH = 5.7, OM = 16.5%), inoculation had only little effect on atz dissipation on the short as well as on the long-term. Nine months after the microflora inoculations, atz was added again and rapid biodegradation in all alkaline inoculated soils was recorded, indicating the long-term efficiency of inoculation. In these soils, the number of atz degraders was estimated at between 6.5 × 10³ and 1.5 × 10⁶ (g of soil)^-1, using the most probable number (MPN) method. Furthermore, the presence of the atz degraders was confirmed by the detection of the gene atzA in these soils. Denaturing gradient gel electrophoresis (DGGE) analysis of the 16S rDNA genes indicated that the inoculated bacterial communities had little effect on the patterns of the indigenous soil microflora.     

Evolution of predictive tools for in situ bioremediation and natural attenuation evaluations

Proving the viability of in situ bioremediation technologies and gathering data for its full‐scale implementation typically involves collecting multiple rounds of data and often completing microcosm studies. Collecting these data is cumbersome, time‐consuming, costly, and typically difficult to scale. A new method of completing microcosm studies in situ using an amendable sampling device deployed and incubated in groundwater monitoring wells provides actionable data to expedite site cleanup. The device, referred to as a Bio‐Trap® sampler, is designed to collect actively colonizing microbes and dissolved organic compounds from groundwater for analysis using conventional analytical techniques and advanced diagnostic tools that can answer very specific design and viability questions relating to bioremediation. Key data that can be provided by in situ microcosm studies using Bio‐Trap® samplers include definitively demonstrating contaminant destruction by using compound‐specific isotope analysis and providing data on the mechanism of the degradation by identifying the responsible microbes. Three case studies are presented that demonstrate the combined flexibility of Bio‐Trap® samplers and advanced site diagnostics. The applications include demonstrating natural attenuation of dissolved chlorinated solvents, demonstrating natural attenuation of dissolved petroleum compounds, and using multiple Bio‐Trap® samplers to comparatively assess the viability of bioaugmentation at a chlorinated solvent release site. At each of these sites, the in situ microcosm studies quickly and cost‐effectively answered key design and viability questions, allowing for regulatory approval and successful full‐scale implementation. © 2010 Wiley Periodicals, Inc.     

Remediation of chlorinated ethenes,ethanes, and methanes in groundwater using carbon‐ and iron‐based electron donor

Field‐scale pilot tests were performed to evaluate enhanced reductive dechlorination (ERD) of dissolved chlorinated solvents at a former manufacturing facility located in western North Carolina (the site). Results of the site assessment indicated the presence of two separate chlorinated solvent–contaminated groundwater plumes, located in the northern and southern portions of the site. The key chlorinated solvents found at the site include 1,1,2,2‐tetrachloroethane, trichloroethene, and chloroform. A special form of EHC^® manufactured by Adventus Americas was used as an electron donor at this site. In this case, EHC is a pH‐buffering electron donor containing controlled release carbon and ZV Iron MicroSphere 200, a micronscale zero‐valent iron (ZVI) manufactured by BASF. Approximately 3,000 pounds of EHC were injected in two Geoprobe^® boreholes in the saprolite zone (southern plume), and 3,500 pounds of EHC were injected at two locations in the partially weathered rock (PWR) zone (northern plume) using hydraulic fracturing techniques. Strong reducing conditions were established immediately after the EHC injection in nearby monitoring wells likely due to the reducing effects of ZV Microsphere 200. After approximately 26 months, the key chlorinated VOCs were reduced over 98 percent in one PWR well. Similarly, the key chlorinated solvent concentrations in the saprolite monitoring wells decreased 86 to 99 percent after initial increases in concentrations of the parent chlorinated solvents. The total organic carbon and metabolic acid concentrations indicated that the electron donor lasted over 26 months after injection in the saprolite aquifer. © 2009 Wiley Periodicals, Inc.     

Perils of categorical thinking: “Oxic/anoxic” conceptual model in environmental remediation

Given ambient atmospheric oxygen concentrations of about 21 percent (by volume), the lower limit for reliable quantitation of dissolved oxygen concentrations in groundwater samples is in the range of 0.1–0.5 mg/L. Frameworks for assessing in situ redox condition are often applied using a simple two‐category (oxic/anoxic) model of oxygen condition. The “oxic” category defines the environmental range in which dissolved oxygen concentrations are clearly expected to impact contaminant biodegradation, either by supporting aerobic biodegradation of electron‐donor contaminants like petroleum hydrocarbons or by inhibiting anaerobic biodegradation of electron‐acceptor contaminants like chloroethenes. The tendency to label the second category “anoxic” leads to an invalid assumption that oxygen is insignificant when, in fact, the dissolved oxygen concentration is less than detection but otherwise unknown. Expressing dissolved oxygen concentrations as numbers of molecules per volume, dissolved oxygen concentrations that fall below the 0.1 mg/L field detection limit range from 1 to 10¹⁷ molecules/L. In light of recent demonstrations of substantial oxygen‐linked biodegradation of chloroethene contaminants at dissolved oxygen concentrations well below the 0.1–0.5 mg/L field detection limit, characterizing “less than detection” oxygen concentrations as “insignificant” is invalid. © 2012 Wiley Periodicals, Inc.     

Bioremediation of contaminated soil and sediment by composting

There are many well‐established bioremediation technologies applied commercially at contaminated sites. One such technology is the use of compost material. Composting matrices and composts are rich sources of microorganisms, which can degrade contaminants to innocuous compounds such as carbon dioxide and water. In this article, composting of contaminated soil and sediment was performed on a laboratory bench‐scale pile. Fertilizer was added to increase the nutrient content, and the addition of commercial compost provided a rich source of microorganisms. After maintaining proper composting conditions, the feasibility of composting was assessed by monitoring pH, total volatile solids, total microbial count, temperature, and organic contaminant concentration. The entire composting process occurred over a period of five weeks and resulted in the degradation of contaminants and production of compost with a high nutritional content that could be further used as inocula for the treatment of hazardous waste sites. © 2006 Wiley Periodicals, Inc.     

Characterizing In Situ Methane‐Enhanced Biostimulation Potential for 1,4‐Dioxane Biodegradation in Groundwater

This study characterizes the 1,4‐dioxane biodegradation potential for an in situ methane‐enhanced biostimulation field pilot study conducted at Air Force Plant 44, located south of the Tucson International Airport in Arizona. In this study, the use of methane as the primary substrate in aerobic cometabolic biodegradation of 1,4‐dioxane is evaluated using environmental molecular diagnostic tools. The findings are compared to an adjacent pilot study, wherein methane was generated via enhanced reductive dechlorination and where methane monooxygenase and methane‐oxidizing bacteria were also found to be abundant. This article also presents the use of ¹³C and ²H isotopic ratio enrichment, a more recent tool, to support the understanding of 1,4‐dioxane biodegradation in situ. This study is the first of its kind, although alkane gas‐enhanced biodegradation of 1,4‐dioxane has been evaluated extensively in microcosm studies and propane‐enhanced biodegradation of 1,4‐dioxane has been previously studied in the field. ©2016 Wiley Periodicals, Inc.     

Treatment of creosote-contaminated groundwater in vegetated sorption/bio-barriers in cold climates

Permeable barriers are structures installed in situ to treat contaminated groundwater. Pollutants are removed as contaminated groundwater flows through a barrier material. A compost/sand barrier and a plant covered permeable barrier with soil/sand and peat/sand were tested in pilot-scale to treat creosote-contaminated groundwater by sorption and biological removal in situ. Outlet concentrations of the barriers were consistently low during the 29 months of operation. Although sorption sites were filled up with polycyclic aromatic hydrocarbons, they seemed to be regenerated because of biodegradation under aerobic conditions. The vegetated section was least efficient, probably because of lack of oxygen, hence it could not be determined if the plants had a positive effect. As long as biodegradation is efficient the barrier is expected to function for several more years.