Vertical distribution of heavy metals in soil profile in a seasonally waterlogging agriculture field in Eastern Ganges Basin

The accumulation of heavy metals in soil and water is a serious concern due to their persistence and toxicity. This study investigated the vertical distribution of heavy metals, possible sources and their relation with soil texture in a soil profile from seasonally waterlogged agriculture fields of Eastern Ganges basin. Fifteen samples were collected at ～0.90-m interval during drilling of 13.11 mbgl and analysed for physical parameters (moisture content and grain size parameters: sand, silt, clay ratio) and heavy metals (Fe, Mn, Cr, Cu, Pb, Zn, Co, Ni and Cd). The average metal content was in the decreasing order of Fe?>?Mn?>?Cr?>?Zn?>?Ni?>?Cu?>?Co?>?Pb?>?Cd. Vertical distribution of Fe, Mn, Zn and Ni shows more or less similar trends, and clay zone records high concentration of heavy metals. The enrichment of heavy metals in clay zone with alkaline pH strongly implies that the heavy metal distributions in the study site are effectively regulated by soil texture and reductive dissolution of Fe and Mn oxy-hydroxides. Correlation coefficient analysis indicates that most of the metals correlate with Fe, Mn and soil texture (clay and silt). Soil quality assessment was carried out using geoaccumulation index (I _geo), enrichment factor (EF) and contamination factor (CF). The enrichment factor values were ranged between 0.66 (Mn) and 2.34 (Co) for the studied metals, and the contamination factor values varied between 0.79 (Mn) and 2.55 (Co). Results suggest that the elements such as Cu and Co are categorized as moderate to moderately severe contamination, which are further confirmed by I _geo values (0.69 for Cu and 0.78 for Co). The concentration of Ni exceeded the effects-range median values, and the biological adverse effect of this metal is 87 %. The average concentration of heavy metals was compared with published data such as concentration of heavy metals in Ganga River sediments, Ganga Delta sediments and upper continental crust (UCC), which apparently revealed that heavy metals such as Fe, Mn, Cr, Pb, Zn and Cd are influenced by the dynamic nature of flood plain deposits. Agricultural practice and domestic sewage are also influenced on the heavy metal content in the study area.     

Evaluation of groundwater quality and its suitability for drinking and agricultural use in Thanjavur city, Tamil Nadu, India

As groundwater is a vital source of water for domestic and agricultural activities in Thanjavur city due to lack of surface water resources, groundwater quality and its suitability for drinking and agricultural usage were evaluated. In this study, 102 groundwater samples were collected from dug wells and bore wells during March 2008 and analyzed for pH, electrical conductivity, temperature, major ions, and nitrate. Results suggest that, in 90% of groundwater samples, sodium and chloride are predominant cation and anion, respectively, and NaCl and CaMgCl are major water types in the study area. The groundwater quality in the study site is impaired by surface contamination sources, mineral dissolution, ion exchange, and evaporation. Nitrate, chloride, and sulfate concentrations strongly express the impact of surface contamination sources such as agricultural and domestic activities, on groundwater quality, and 13% of samples have elevated nitrate content (>45 mg/l as NO₃). PHREEQC code and Gibbs plots were employed to evaluate the contribution of mineral dissolution and suggest that mineral dissolution, especially carbonate minerals, regulates water chemistry. Groundwater suitability for drinking usage was evaluated by the World Health Organization and Indian standards and suggests that 34% of samples are not suitable for drinking. Integrated groundwater suitability map for drinking purposes was created using drinking water standards based on a concept that if the groundwater sample exceeds any one of the standards, it is not suitable for drinking. This map illustrates that wells in zones 1, 2, 3, and 4 are not fit for drinking purpose. Likewise, irrigational suitability of groundwater in the study region was evaluated, and results suggest that 20% samples are not fit for irrigation. Groundwater suitability map for irrigation was also produced based on salinity and sodium hazards and denotes that wells mostly situated in zones 2 and 3 are not suitable for irrigation. Both integrated suitability maps for drinking and irrigation usage provide overall scenario about the groundwater quality in the study area. Finally, the study concluded that groundwater quality is impaired by man-made activities, and proper management plan is necessary to protect valuable groundwater resources in Thanjavur city.     

A spectrophotometric assay method for vanadium in biological and environmental samples using 2,4-dinitrophenylhydrazine with imipramine hydrochloride

A simple, rapid, and sensitive method involving the interaction of 2,4-dinitrophenylhydrazine with imipramine hydrochloride in presence of vanadium (V) in sulfuric acid medium has been proposed for the determination of vanadium. The purple-colored product developed showed an absorption maximum at 560 nm and was stable for 24 h. The working curve was linear over the concentration range of 0.1–2.8 μg ml^− 1, with sensitivity of detection of 0.0124 μg ml^− 1. Molar absorptivity and Sandell’s sensitivity were found to be 2.6 × 10⁴ l/mol cm and 0.0039 μg cm^− 1, respectively. The accuracy of the proposed method was assessed by Student’s t test and variance ratio F test, and the results were on par with the reported method. The method was successfully used in the determination of V in water, human urine, soil, and plant samples, and it was free from interference by various concomitant ions.     

Variability of soil-water quality due to Tsunami-2004 in the coastal belt of Nagapattinam district, Tamilnadu

In this study, the Tsunami-caused deterioration of soil and groundwater quality in the agricultural fields of coastal Nagapattinam district of Tamilnadu state in India is presented by analyzing their salinity and sodicity parameters. To accomplish this, three sets of soil samples up to a depth of 30cm from the land surface were collected for the first six months of the year 2005 from 28 locations and the ground water samples were monitored from seven existing dug wells and hand pumps covering the study region at intervals of 3 months. The EC and pH values of both the soil and ground water samples were estimated and the spatial and temporal variability mappings of these parameters were performed using the geostatistical analysis module of ArcGIS((R)). It was observed that the spherical semivariogram fitted well with the data set of both EC and pH and the generated kriged maps explained the spatial and temporal variability under different ranges of EC and pH values. Further, the recorded EC and pH data of soil and ground water during pre-Tsunami periods were compared with the collected data and generated variability soil maps of EC and pH of the post-Tsunami period. It was revealed from this analysis that the soil quality six months after the Tsunami was nearing the pre-Tsunami scenario (EC< 1.5dSm(-1); pH<8), whereas the quality of ground water remained highly saline and unfit for irrigation and drinking. These observations were compared with the ground scenarios of the study region and possible causes for such changes and the remedial measures for taking up regular agricultural practices are also discussed.     

Influence of hydraulic retention time in a two-phase upflow anaerobic sludge blanket reactor treating textile dyeing effluent using sago effluent as the co-substrate

Purpose  

Textile dyeing and sago industries are the most polluting industries in South India, especially in industrial cities like Salem, Tamil Nadu, where textile dyeing and sago industries are clumped together geographically. Conventional physicochemical treatment followed by biological processes for the effluent generated from these industries are ineffective, costlier and produce huge quantities of hazardous sludge and harmful by-products which requires further treatment and safe disposal. Hence, the development of an alternative treatment method will become important. The main objective of this investigation is to establish a sustainable biotreatment technology for the treatment of textile dyeing effluent using sago effluent as co-substrate in a two-phase upflow anaerobic sludge blanket (UASB) reactor.     

Properties of Biocomposite Films From PLA and Thermally Treated Wood Modified with Silver Nanoparticles Using Leaf Extracts of Oriental Sweetgum

Journal of Polymers and the Environment - The technological, thermal, and antimicrobial properties of biocomposite films produced from polylactic acid (PLA) and thermally treated wood flour with in...     

Clove as antioxidant additive in diesel–biodiesel fuel blends in diesel engines

Increased NOx emission from usage of biodiesel is a burning issue to be dealt with. Many techniques have been adopted to reduce NOx emissions from diesel engines. The present experimental study deals with the analysis of performance and emission characteristics of Cotton Seed oil biodiesel with the addition of natural antioxidant extract of clove. FTIR analysis characterized the antioxidant by the presence of hydroxyl groups denoted by the corresponding wave number. The oxidation stability of the test samples was determined in terms of induction period by means of Rancimat test. The induction periods of the test fuel samples B100, B20, B20+CL1000, and B20+CL2000 were found to be 2.20 h, 2.73 h, 10.19 h, and 11.12 h, respectively. Thus, the addition of Clove antioxidant increased the oxidation stability of the biodiesel. Results show that the addition of antioxidant to biodiesel blend has increased the Brake Thermal Efficiency to a maximum of 4.71% and decreased the Brake Specific Fuel Consumption to a maximum of 6.25% at full-load conditions compared to Cotton Seed biodiesel blend. The addition of Clove extract antioxidant at a concentration of 1000 ppm and 2000 ppm decreases the NOx emission by 23.03% and 26.7%, respectively, at full-load conditions. However, CO emissions increased by 1.12% and 4.49% with the addition of CL1000 and CL2000 to B20, respectively. Similarly, HC emissions increased by 4.19% and 7.35% by the addition of CL1000 and CL2000 to B20, respectively. The increases in smoke with the addition of CL1000 and CL2000 to B20 were 42.48% and 47.71%, respectively.     

Studies on Merops orientalis Latham 1801 with special reference to its population in Mayiladuthurai, Tamil Nadu

Role of habitat-structure and climatic factors in the population dynamics of the small green bee-eater Merops orientalis was evaluated in three habitats viz., agricultural lands, river banks and human habitations during 1991-1993. The river banks supported relatively high population of bee-eaters (157/Km2) followed by the agricultural lands (101/Km2) and human habitations (58/Km2). Bee-eater populations showed year-wise variations in river banks and human habitations having high values during 1992 (123/Km2) and 1993 (43/Km2) respectively. Agricultural lands showed a significantly low mean density in 1991 than other years. Seasonal variations in the bee-eater densities among the habitats were also recorded. Vegetation structure, food (insects) availability, climatic conditions and human disturbance were the casual factors for variations in bee-eater populations.     

Factors influencing NOx emission of a stationary diesel engine fuelled with crude rice bran oil methyl ester blend – Taguchi approach

The main objective of this work is to control the NO_x emission of a stationary diesel engine fuelled with crude rice bran oil methyl ester blend with less sacrifice on smoke density and brake thermal efficiency (BTE) and also to investigate the factors influencing the objective. Fuel injection timing, percentage of exhaust gas recirculation and fuel injection pressure are chosen as the promising factors for the objective and NO_x emission, smoke density and BTE are considered as response variables. Tests were conducted as per Taguchi’s L₉ orthogonal array and the most influencing factor for each response variable and also the significance of each factor on the same was found out through analysis of variance (ANOVA). Response graph was drawn for each response variable and from the results of response graph and ANOVA the optimum combination of the factor levels in achieving the objective was obtained and the same was confirmed experimentally.