Potential utilization of burned wood in manufacture of medium density fiberboard

The potential utilization of burned wood in the manufacture of medium density fiberboard (MDF) was investigated. For this aim, the MDF panels were made of various mixtures of burned pine wood (Pinus sylvestris L.), unburned beech (Fagus orientalis L.) and oak (Ouercus robur L.) woods under commercial conditions in an MDF company. The mixture ratio of the unburned beech and oak woods to the burned pine wood were 50/50 wt%. The mixing ratios of burned wood chips with unburned wood chips were 0:100, 25:75, 50:50, 75:25 and 100:0, %, respectively. A commercial urea–formaldehyde resin was used as a binder. The physical properties measured in the investigation included density and thickness swelling, while the mechanical properties examined were bending strength, modulus elasticity, internal bond, screw holding ability perpendicular to the plane of panel, and janka hardness perpendicular to the plane of the panel. Surface roughness and color of the panels were also measured. The results indicated that all the panels met the mechanical properties of general-purpose MDF requirements of EN 622-5. The surface roughness of the MDF panels containing burned wood decreased with increasing burned wood content but remained higher than the control panels. The dimensional stability of the MDF panels decreased with the incorporation of burned wood fibers as compared with the control MDF panels.     

Properties of Biocomposite Films From PLA and Thermally Treated Wood Modified with Silver Nanoparticles Using Leaf Extracts of Oriental Sweetgum

Journal of Polymers and the Environment - The technological, thermal, and antimicrobial properties of biocomposite films produced from polylactic acid (PLA) and thermally treated wood flour with in...     

Testing the performance of European diatom indices for evaluating the ecological status in the Kızılırmak basin,Turkey: flowing waters

Environmental Science and Pollution Research - The K?z?l?rmak River is the longest river (1.355 km) in Turkey and flows into the Black Sea. Main pressures in the basin are waste...     

Pyrolysis of commingled waste textile fibers in a batch reactor: Analysis of the pyrolysis gases and solid product

The main object of this study was the investigation of the thermal recycling of commingled waste textile fibers, with the aim of the production of useful end products. Differential scanning calorimetry/Thermo gravimetric analysis (DSC/TGA) was applied to determine the thermal degradation characteristics of the commingled waste textile fibers and there are two peaks located at the temperature ranges of 299–360°C and 399–500°C. Commingled waste fiber was pyrolyzed in a nitrogen atmosphere in relation to three different temperatures (500, 600, and 700°C), heating rates (25 and 50°C min^?1), and retention times (15 and 30 min). The effect of the experimental conditions such as pyrolysis temperature, heating rates, and retention time on the formation of char and gas--liquid products was investigated and the product yields were determined from the rate of the weight loss. The highest conversion rate 82.9 wt.% liquid--gas product and 17.1 wt.% char product was achieved at 700°C. Pyrolysis gases were taken for every 7, 15, and 25 min and were analyzed for major components such as CO, CO₂, CH₄, and H₂ by gas chromatography. The pyrolysis char called as carbon black derived from the pyrolysis of commingled waste textile fibers was analyzed for a range of properties, including the elemental analysis, moisture content, ash content, calorific value, and trace metal analysis.     

Prenatal diagnosis of Milroy's primary congenital lymphedema

Milroy's primary congenital lymphedema (PCL) (hereditary lymphedema type I, Milroy disease) is present at birth, and mostly affects the dorsal aspects of feet. It is mostly a life-long condition but does not affect longevity. Complications are rare except for chronic discomfort and warmness of affected areas. PCL is an autosomal dominant disease with incomplete penetrance due to a mutation in the gene locus encoding for VEGFR3 with resultant dysgenesis of microlymphatic vessels. We report on two fetuses where ultrasonographic examination at 15 weeks of gestation showed significant edema of the dorsal aspects of both feet with no evidence of other major malformations. Whereas in one fetus the edema resolved completely, it persisted in the second fetus and proved after birth to be of lymphedematous nature. To the best of our knowledge, this is the first report of early prenatal diagnosis of primary congenital lymphedema via fetal ultrasonographic examination and of spontaneous resolution of lymphedema during fetal life. Copyright © 2002 John Wiley & Sons, Ltd.     

Utilization of Sunflower Stalk in Manufacture of Thermoplastic Composite

Dimensional stability and mechanical performance of polypropylene thermoplastic composites filled with sunflower stalk (SS) flour at 30, 40, 50, and 60 wt% contents of the SS flour were investigated. The thickness swelling and water absorption of the specimens increased with increasing SS flour content. The modulus in the flexural and tensile improved with increasing SS flour content while the tensile and flexural strengths of the specimens decreased. The use of maleic anhydride polypropylene (3 wt%) had a positive effect on the dimensional stability and mechanical properties of the polypropylene thermoplastic composites filled with SS flour. The melting temperature of polypropylene decreased with increasing content of the SS flour. The degree of crystallinity of filled polypropylene composites between fibre loading of 0–30 % by weight was higher than that of unfilled polypropylene composites. However, further increment in the filler content decreased the degree of crystallinity. The obtained results showed that SS flour could be potentially suitable raw material in the manufacture of polypropylene composites.     

Competitive effects and interactions during sorption of SMP fractions on activated carbon: response surface approach for visualization of sorption profiles

The objectives of this study were to investigate the significance of the effects and interactions for during competitive sorption of soluble microbial products (SMP). Batch experiments were conducted to assess the competitive sorption characteristics and individual affinity of glucose (carbohydrate) and bovine serum albumin (BSA) (protein) as two representative fractions of SMP. The influence of surface availability was investigated by using carbon particles with different particle sizes (5-75 μm, 75-850 μm, and 850-1000 μm) and different carbon amounts. Competitive effects and interactions were evaluated for each adsorbate and surface availability. Competitive sorption mechanisms were quantified in relation to surface affinity of the SMP fractions. Sorption capacity profiles of the SMP fractions at equilibrium were developed using second-degree polynomial models for the experimental data and compared with the estimates obtained from the modified Langmuir-like model which uses single parameter sorption data to estimate competitive sorption profiles of systems with two adsorbates. Adequacy limitations of the modified Langmuir-like model for each SMP fraction were evaluated based on the significance of the synergistic and antagonistic effects between the two SMP fractions and the carbon surface availability.     

Utilization of waste tire rubber in manufacture of oriented strandboard

Some physical and mechanical properties of oriented strandboards (OSBs) containing waste tire rubber at various addition levels based on the oven-dry strand weight, using the same method as that used in the manufacture of OSB. Two resin types, phenol–formaldehyde (PF) and polyisocyanate, were used in the experiments. The manufacturing parameters were: a specific gravity of 0.65 and waste tire rubber content (10/90, 20/80 and 30/70 by wt.% of waste tire rubber/wood strand). Average internal bond values of PF-bonded OSB panels with rubber chips were between 17.6% and 48.5% lower than the average of the control samples while polyisocyanate bonded OSBs were 16.5–50.6%. However, water resistance and mechanical properties of OSBs made using polyisocyanate resin were found to comply with general-purpose OSB minimum property requirements of EN 300 Type 1 (1997) values for use in dry conditions at the lowest tire rubber loading level (10%) based on the oven-dry panel weight. The tire rubber improved water resistance of the OSB panel due to its almost hydrophobic property. Based on the findings obtained from this study, we concluded that waste tire rubber could be used for general-purpose OSB manufacturing up to 10% ratio based on the oven-dry panel weight.     

Investigating the impacts of some meteorological parameters on air pollution in Balikesir, Turkey

Air pollution is one of the most important environmental problems in Balikesir, situated in the western part of Turkey, during the winter periods. The unfavorable climate as well as the city’s topography, and inappropriate fuel usage cause serious air pollution problems. The air pollutant concentrations in the city have a close relationship with meteorological parameters. In the present study, the relationship between daily average total suspended particulate (TSP) and sulphur dioxide (SO₂) concentrations measured between 1999–2005 winter seasons were correlated with meteorological factors, such as wind speed, temperature, relative humidity and pressure. This statistical analysis was achieved using the stepwise multiple linear regression method. According to the results obtained through the analysis, higher TSP and SO₂ concentrations are strongly related to colder temperatures, lower wind speed, higher atmospheric pressure and higher relative humidity. The statistical models of SO₂ and TSP gave correlation coefficient values (R ²) of 0.735 and 0.656, respectively.     

GC-EAD responses to semiochemicals by eight beetles in the subcortical community associated with Monterey pine trees in coastal California: similarities and disparities across three trophic levels

Summary.  Antennae of six sympatric bark and ambrosia beetles (Scolytidae), Dendroctonus valens LeConte, Gnathotrichus retusus (LeConte), Hylastes tenuis Eichhoff, Ips mexicanus (Hopkins), Ips plastographus maritimus Lanier, and Pseudohylesinus sericeus (Mannerheim), and two scolytid predators, Enoclerus sphegeus (F.) (Cleridae) and Lascontonus tuberculatus Kraus (Colydiidae), were analyzed by gas chromatographic-electroantennographic detection (GC-EAD) for their responses to synthetic Ips spp. pheromone components, and host and nonhost volatiles. The beetles emerged from cut logs of pitch canker-infected Monterey pine trees, Pinus radiata D. Don. There were significant disparities in EAD response patterns to the hemiterpene and monoterpene alcohol pheromone components that are typically produced by Ips spp. Antennae of I. p. maritimus responded strongly to ( ± )-ipsdienol, ( ± )-ipsenol, amitinol, and lanierone; antennae of I. mexicanus responded strongly to (1S,2S)-(–)-cis-verbenol, with weaker responses to ( ± )-ipsdienol, ( ± )-ipsenol, and amitinol; antennae of H. tenuis responded to (1S, 2R)-(–)-trans-ver-benol, with less pronounced responses to (–)-cis-verbenol and 2-methyl-3-buten-2-ol; and antennae of D. valens, G. retusus, and P. sericeus generally responded to all Ips spp. pheromone components except 2-methyl-3-buten-2-ol (D. valens and G. retusus) and E-myrcenol (G. retusus and P. sericeus). Ips mexicanus responded only to the (–)-enantiomers of ipsenol and ipsdienol, whereas I. p. maritimus responded to (–)-ipsenol, but to both the (+)- and (–)-enantiomers of ipsdienol. The antennae of the two predaceous insects (E. sphegeus and L. tuberculatus) responded to a range of the Ips spp. pheromone components. Host monoterpenes elicited no antennal responses from E. sphegeus, G. retusus, H. tenuis, and I. mexicanus, but several monoterpenes elicited various levels of responses from D. valens and I. p. maritimus antennae. Interestingly, antennae of female D. valens responded to (–), but not (+)-limonene. α- and β-Pinene elicited weak responses from L. tuberculatus antennae. EAD responses to selected nonhost volatiles were almost identical among the six scolytid species, with trans-conophthorin eliciting the strongest response in most cases, followed by three C₆- alcohols and two C₈-alcohols. The antennal responses by most of these species to linalool or geranylacetone were very weak; (E)-2-hexenal, (Z)-3-hexenyl acetate, and benzyl alcohol elicited almost no response. The response pattern of P. sericeus to nonhost volatiles differed slightly from the rest of the scolytids: a strong response to linalool, weaker response to the C₈-alcohols. The two predaceous Coleoptera generally had weak, but detectable, responses to nonhost volatiles, except for a relatively strong response to trans-conophthorin by L. tuberculatus. No notable differences in EAD responses were observed between males and females of the two Ips spp. Our results provide an electrophysiological baseline for future efforts to identify attractive and repellent semiochemicals (aggregation pheromones, host kairomones, or nonhost interruptants) for this guild of scolytids and their key predators that are associated with moribund and pitch canker- infected P. radiata.