A new method for the detection of low levels of free fibres of chrysotile in contaminated soils by X-ray powder diffraction

A new method for the determination of free fibres of chrysotile in contaminated soils is described. The detection limit of 0.5 wt per thousand is reached by an enrichment process of the asbestos fraction of the sample using a standard laboratory elutriator for sedimentation analysis. The analysis of the enriched fraction is performed by X-ray powder diffraction using a conventional instrument. The procedure can be successfully applied to several soils of different nature throughout thermal treatment and removal of possible interferences due to some matrix components. This method is straightforward, routinized and has been especially developed to fulfil the request of public and private institutions for an appropriate quantitative determination of chrysotile free fibres in contaminated soils.     

Exposure and inhalation risk assessment in an aluminium cast-house

To date the exposure, absorption and respiratory health effects of cast-house workers have not been described since most studies performed in the aluminium industry are focused on exposure and health effects of potroom personnel. In the present study, we assessed the external exposure and the absorbed dose of metals in personnel from the aluminium cast house. This was combined with an evaluation of respiratory complaints and the lung function of the personnel. 30 workers from an aluminium casting plant participated and 17 individuals of the packaging and distribution departments were selected as controls. The exposure was assessed by the quantification of total inhalable fume with metal fraction and by the determination of urinary aluminium, chromium, beryllium, manganese and lead concentration. Carbon monoxide (CO), carbon dioxide (CO2), aldehydes and polyaromatic hydrocarbons and man-made mineral fibres concentration were assessed as well. In order to evaluate their respiratory status each participant filled out a questionnaire and their lung function was tested by forced spirometry. Total inhalable fume exposure was maximum 4.37 mg m(-3). Exposure to the combustion gases, man-made mineral fibres and metal fume was well below the exposure limits. Beryllium could not be detected in the urine. The values of aluminium, manganese and lead in the urine were all under the respective reference value. One individual had a urinary chromium excretion above the ACGIH defined biological exposure index (BEI) of 30 microg g(-1) creatinine. There was no significant difference in any of the categories of the respiratory questionnaire and in the results of the spirometry between cast house personnel and referents (Chi-square, all p > 0.05). Exposure in cast houses seem to be acceptable under these conditions. However, peak exposure to fumes cannot be excluded and the potential risk of chromium and beryllium exposure due to the recycling of aluminium requires further attention.     

Near - Infrared Diode Laser Air Monitoring

Inexpensive near-infrared diode lasers are now being used to enable high sensitivity, real time monitoring of gases both in open path measurements of urban air quality and in industrial environments for stack gas emission monitoring. Individual species are detected in a highly selective manner via overtone and combination bands of their vibrational spectra. Operating at room temperature and with simple optical components they can be made into portable instruments, ideal for field measurements. Combined with optical fibres they can be used for accessing remote and possibly dangerous locations. This paper presents current progress on the development of such a system illustrating recent results on ammonia monitoring at 1540 nm and acetylene at 780 nm. Sensitivities of the order of parts per million and below have been attained. Advantages and disadvantages of this approach to air pollution monitoring will be described. Pressure broadening results are also given for the 2v1 band of ammonia.     

A ten channel fibre-optic device for distributed sensing of underground hydrocarbon leakage

With millions of fuel storage tanks and oil pipelines installed around the world, there is inevitably frequent leakage of potentially hazardous hydrocarbons. As many of these installations are below ground, it can often be many years before the extent of the leak is discovered. We have previously reported the development of a sensor for the detection of such subterranean leaks, using infrared reflectometry to interrogate a hydrocarbon sensitive membrane. However, a single sensor cannot provide any information about the flow rate or direction of the leak. This paper describes the extension of the technology to a multi-channel distributed sensing system, using optical fibres capable of distributing the sensors over large subterranean areas. Results are reported from the evaluation of the device, which consisted of monitoring the movement of different hydrocarbons (gasoline, diesel and insulating oil) through a vertical sand-filled vessel.     

Pesticide vapours in confined atmospheres. Determination of dichlorvos by SPME-GC-MS at the microg m(-3) level

A method based on SPME is described for assessing the gaseous dichlorvos concentration in confined atmospheres like a greenhouse after a pesticide application. Sampling was made by using SPME with PDMS fibres immersed into a 250 mL sampling flask into which air samples were dynamically pumped from the analysed atmosphere. Sampling duration was 40 min and samples were then analysed by GC-MS. Calibration was performed from a vapour saturated air sample and gas phase diluted samples, and this procedure afforded a curve with a regression coefficient (R2) higher than 0.98. The repeatability of these measurements was observed with an RSD of 2.5%. This analysis procedure was then applied for the determination of gaseous dichlorvos concentrations versus time, in the atmosphere of an experimental 8 m2 and 20 m3 greenhouse. The pesticide was sprayed according to real cultivation conditions and measurements were made from 2 up to 74 h after application affording observed concentrations in the range of decades and hundreds of microg m(-3) (corresponding limits of detection and quantification were found at the level of a few microg m(-3)).     

Ecotoxicological assessment of acid mine drainage: electrophysiological changes in earthworm (Aporrectodea caliginosa) and aquatic oligochaete (Lumbriculus variegatus)

Ecological health of 15 sites in two mining areas on the West Coast of the South Island, New Zealand, was assessed using a non-invasive electrophysiological technique. The conduction velocity (CV) changes in the medial giant fibres (MGF) of the terrestrial earthworm Aporrectodea caliginosa were measured on days 0, 1, 2, 4, 7, 14, and 21 following exposure to soil and/or sediment from six acid mine drainage (AMD) sites, and aquatic oligochaete Lumbriculus variegatus at 0, 3, 6, and 24 h following exposure to water from 14 AMD sites. The colour of the soil/sediments varied from red-brown to black with pH ranging from 4.46 to 7.37. The colour of AMD water samples varied from clear, black, brown to orange, and the pH ranged from 2.99 to 7.66. The CV decreased progressively in A. caliginosa exposed to most soil and sediment samples from the AMD sites (compared with controls exposed to soil from an organic farm) and this was most evident in measurements taken at 7 days. Based on the CV measurements taken on day 7, sites 3 > 2 > 1 were significantly (P < 0.05) the most toxic to earthworms. The CV of L. variegatus exposed to AMD water sampled from many sites also decreased progressively and this was significantly lower than the controls in the measurements taken at 24 h from sites 3 > 9 > 7 > 11. It is proposed that MGF CV in A. caliginosa and L. variegatus worms can be used as a non-invasive, sensitive, biomarker to monitor the toxicity of AMD sites.     

The collection of PM10 for toxicological investigation: comparisons between different collecting devices

A positive correlation has been established between increased levels of airborne particulate pollution and adverse health effects, the toxicological mechanisms of which are poorly understood. For toxicologists to unambiguously determine thesemechanisms, truly representative samples of ambient PM₁₀ are required. This presents problems, as PM₁₀ collecting equipment commonly employed, such as the Tapered Element Oscillating Microbalance (TEOM®), heat the inflow toexclude moisture or use fibrous filters, resulting in a PM₁₀sample that may have undergone significant chemical change on thefilter surface or is contaminated by filter fibres. Other systems(i.e. Negretti and Partisol) can successfully collect PM₁₀ without chemical alteration or filter contamination. Comparativecollections from Port Talbot, S. Wales suggest that TEOMs and Negretti/Partisol systems collect different PM₁₀'s; the principle difference arising from the TEOM's heating chamber, which precipitates water-soluble ions and volatilises some organic components. This results in both the mass and compositionof the PM₁₀'s being altered. Particle size distributionsfor Negretti and Partisol collections highlighted differences mainly attributed to different flow rates. The results of thiswork demonstrate that simple correlations between PM₁₀ massand adverse health effects are problematic. Furthermore, elucidation of the complex fractionation and chemical changes indifferent collectors is necessary.     

Quantification of re-evaporated mass from loaded fibre-mist eliminators

Airborne lubricant emissions are a serious health hazard for employees in the metal working industry. The basic components of lubricants are oils and additives for adapting the properties to achieve the process demands. The oils used in lubricants are either mineral, synthetic or of biological origin. The lubricants are used as water-emulsions and also as straight oils. Extreme process conditions cause considerable amounts of aerosol and vapour emissions of lubricants into the working environment. Fibre filters are used in industrial demisters for pollution control and also for sampling purposes. Re-evaporation of separated lubricants from loaded fibre filters causes increased vapour emissions. Quantification of lubricant vapour emission was the subject of this research. An apparatus and an appropriate procedure for measuring the dynamic behaviour of evaporative losses from fibre filters were developed. The test piece of a loaded fibre filter was fixed in a sampling probe according to VDI 2066. The vapour concentration of organic compounds in downstream air was measured in real-time by using a photo-ionisation detector (PID). The PID was checked by sampling the vapour on an oleophilic adsorbent resin, solvent extraction and quantitative IR analysis and also gravimetrically. The two basic processes of filtering volatile aerosols are, on the one hand, collecting droplets on the fibres and, on the other hand, the evaporation of collected liquid. These two processes had to be separated in order to measure the increase of the vapour concentration caused by the tested fibre filter. The experiments were carried out using pure dodecane and hexadecane in order to avoid difficulties due to the unknown chemical composition of lubricant vapour. The variation of the air flow and the initial liquid mass on the filter covered the relevant range for industrial fibre demisters and for sampling methods based on collecting aerosols on fibre filters. It was found that the downstream air was saturated with lubricant vapour for a wide range of filter loads and filtration velocities. From the results obtained it can be concluded that loaded industrial filter systems emit air with saturation vapour concentration throughout their operation. Hence, vapour emissions can be estimated easily if the saturation vapour pressure and the mean relative molecular mass are known. Moreover, results obtained from measurements of filters with low loads confirm that the phase transition from liquid to vapour is influenced by the identified process parameters. This is relevant for measurement methods using fibre filters for sampling volatile aerosols. A semi-empirical model to estimate the evaporative losses for low loadings is proposed. However, further research is necessary to determine the full range of parameters that are relevant for evaporative losses from filters loaded with low masses of aerosols.     

Energy and carbon footprint assessment of production of hemp hurds for application in buildings

Construction is considered as one of the most relevant sectors in terms of environmental impacts, due to the significant use of raw materials, fossil energy consumption and the consequent Greenhouse Gases emissions. The use of unconventional and environmentally-friendly materials and technologies is worldwide recognised as a key factor to enable the decrease of material and energy consumption in buildings. Between natural/sustainable materials, those using hemp products and by-products (fibres and hurds) have rapidly widened their field of application in the building industry, mainly because of their good hygrothermal and acoustic insulation properties. Moreover, the usage of these materials allows high carbon storage due to the CO₂ sequestration during the agricultural phase.This study represents an energy and environmental assessment of hemp crop cultivation in France, carried out through a Life Cycle Assessment approach, showing positive and negative contribution related to the different life cycle phases. The total CF evaluated through the IPCC, 2013 GWP 100 method (IPCC, 2013) is equal to 0.975 kgCO₂eq, in view of a CO₂ uptake of −1.29 kgCO₂eq. So, it is understood that the total CF results therefore lower than the CO2 uptake due to the biogenic carbon captured and stored during hemp growth. The total Energy Footprint, instead, was calculated in 17.945 MJ. The Upstream phase came out as the main contributor to the impacts. A sensitivity analysis was performed to explore changes in results related to main inputs assumptions and, in particular, the environmental benefits associated with the replacement of conventional fertilisers (ammonium sulphate) with organic matter were highlighted.     

Climate Damage on Production or on Growth: What Impact on the Social Cost of Carbon?

Recent articles have investigated with integrated assessment models the possibility that climate damage bears on productivity (TFP) growth and not on production. Here, we compare the impact of these alternative representations of damage on the social cost of carbon (SCC). We ask whether damage on TFP growth leads to higher SCC than damage on production ceteris paribus. To make possible a controlled comparison, we introduce a measure of aggregate damage, or damage strength, based on welfare variations. With a simple climate-economy model, we compare three damage structures: quadratic damage on production, linear damage on growth and quadratic damage on growth. We show that when damage strength is the same, the ranking of SCC between a model with damage on production and a model with damage on TFP growth is not unequivocal. It depends on welfare parameters such as the utility discount rate or the elasticity of marginal social utility of consumption.     

Low-Carbon Policy Making vs. Low-Carbon Policy Modelling: State-of-the-Art and Challenges

This paper surveys the use made of modelling expertise in the recent literature focused on the policy making of low-carbon societies in Europe, both peer-reviewed and ‘grey’. The first section focuses on the prominent policy instrument of carbon pricing. It starts by analysing the somewhat confusing use made of carbon pricing modelling in policy reports emanating from the French and British governments, then reviews some modelling results on carbon pricing in a ‘second best’ world. The second section lists the impressive collection of more focused policy instruments that are advocated in both governmental and non-governmental literature. It insists on the contrast between the high degree of precision of some of these policy proposals and the limited modelling of their impacts, either from an environmental or an economic point of view. The third section concludes on recommendations to the policy modelling community inspired by this survey. Purposely avoiding the current controversies surrounding cost–benefit analysis, it advocates further applied research on the cost efficiency of carbon pricing trajectories (when flexibility); on the terra incognita beyond first best uniform pricing (where flexibility); on the elicitation of policy overlaps; and on the modelling of extended policy portfolios in comprehensive, consistent modelling frameworks.     

春节燃放烟花爆竹对南京气溶胶细粒子的影响

根据南京城区草场门与远郊固城湖大气观测点PM2.5质量浓度及组分监测结果,分析了2012年春节期间烟花爆竹燃放对城市气溶胶细粒子的影响。结果表明,春节除夕和初五烟花爆竹集中燃放时段,草场门观测点PM10和PM2.5均出现同步异常突升,且细颗粒物占比较大,PM2.5最大峰值同比远郊固城湖观测点分别高出2.79倍和6.02倍;PM2.5各化学组分中,城区草场门观测点水溶性离子K^＋、Cl^-和SO4^2＋以及微量元素K、Al、Mg、Fe、Ba等值同比远郊固城湖明显偏高,春节烟花爆竹燃放对南京城区空气质量影响显著。     

RELATIONSHIP BETWEEN BASAL SOIL RESPIRATION RATE, TREE STAND AND SOIL CHARACTERISTICS IN BOREAL FORESTS

Soil respiration is considered to represent the overall microbial activity reflecting mineralisation of organic matter in soil. It is the most commonly used biological variable in soil studies. In long-term monitoring of forested areas, there is a need for reference values for soil microbiological variables in different forest ecosystems. In this study we describe the relationship between soil respiration rate, tree stand and humus chemical characteristics of boreal coniferous forests stands. Soil respiration rate was higher in pine dominated than in spruce dominated study sites when the result was calculated on dry matter bases. However, when calculated on area bases, the result was opposite and no difference was found when the soil respiration rate was calculated on organic carbon bases. Irrespective of the main tree species, the soil respiration rate was equal in different development classes but not equal in soil fertility classes, i.e. within forest site types based on differences in ground vegetation. Respiration rates were clearly higher in mesic sites when calculated on dry matter, C_org or area bases. However, soil respiration rate did not correlate with soil chemical variables indicating site fertility. Soil respiration rate on dry matter basis was at a lower level in the south and on more fertile sites, and on the other hand at a higher level in older stands and on sites with a thicker organic layer.     

Trends in Pesticide Use and Efficacy During 26 Years of Changing Agriculture in Southern England

We report on trends in agricultural pesticide use from1970 to 1995 inclusive in arable crops on the SouthDowns, West Sussex, U.K. Information is given on theproportion of cropped area treated with pesticides,the percentage spray area, the number of pesticideapplications per field, and the number of compoundsapplied per field for herbicides, foliar fungicidesand insecticides. Compared to national publishedfigures, our data are broadly representative of thenational picture; they provide a complete and detailedtime series whereas national figures are available foronly 7 out of the 26 yr. In general, the areatreated (fungicides, insecticides) and the intensityof use (all three types of pesticide) increased overthe 26 yr. The spectrum of activity of theherbicides applied to arable crops increased from anaverage of 22 weed taxa susceptible in 1970 to 38 weedtaxa susceptible in 1995. The odds on herbicide andfungicide use in break crops were, respectively, 93%and 99% lower than average; odds on insecticide usein spring cereals were 98% lower than average. Comparing winter wheat on the most traditional farm(grass/cereal rotation) with the most modern one(monoculture winter wheat), the proportion of fieldstreated with herbicides was similar, but the odds onbeing treated with fungicides were 129% higher on themodern farm. Insecticides were used in only 2% ofthe fields on the traditional farm, while on themodern farm over the same time period, 79% of thefields were treated. This fits previously observeddifferences in wildlife abundance on the two farms.     

A review of uncertainty research in impact assessment

This paper examines uncertainty research in Impact Assessment (IA) and the focus of attention of the IA scholarly literature. We do so by first exploring ‘outside’ the IA literature, identifying three main themes of uncertainty research, and then apply these themes to examine the focus of scholarly research on uncertainty ‘inside’ IA. Based on a search of the database Scopus, we identified 134 journal papers published between 1970 and 2013 that address uncertainty in IA, 75% of which were published since 2005. We found that 90% of IA research addressing uncertainty focused on uncertainty in the practice of IA, including uncertainty in impact predictions, models and managing environmental impacts. Notwithstanding early guidance on uncertainty treatment in IA from the 1980s, we found no common, underlying conceptual framework that was guiding research on uncertainty in IA practice. Considerably less attention, only 9% of papers, focused on uncertainty communication, disclosure and decision-making under uncertain conditions, the majority of which focused on the need to disclose uncertainties as opposed to providing guidance on how to do so and effectively use that information to inform decisions. Finally, research focused on theory building for explaining human behavior with respect to uncertainty avoidance constituted only 1% of the IA published literature. We suggest the need for further conceptual framework development for researchers focused on identifying and addressing uncertainty in IA practice; the need for guidance on how best to communicate uncertainties in practice, versus criticizing practitioners for not doing so; research that explores how best to interpret and use disclosures about uncertainty when making decisions about project approvals, and the implications of doing so; and academic theory building and exploring the utility of existing theories to better understand and explain uncertainty avoidance behavior in IA.     

Effect of odour on multisensory environmental evaluations of road traffic

This study investigated the effect of odour on multisensory environmental evaluations of road traffic. The study aimed to answer: (1) Does odour have any effect on evaluations on noise, landscape and the overall environment? (2) How different are participants' responses to odour stimuli and are these differences influential on the evaluations? Experimental scenarios varied in three Traffic levels, three Tree screening conditions and two Odour presence conditions were designed, and presented to participants in virtual reality. Perceived Loudness, Noise Annoyance, Landscape Quality and Overall Pleasantness of each scenario were evaluated and the results were analysed. It shows that Odour presence did not have significant main effect on any of the evaluations, but has significant interactions with Traffic level on Noise Annoyance and with Tree screening on Landscape Quality, indicating the potential of odour to modulate noise and visual landscape perceptions in specific environmental content. Concerning participants' responses to odour stimuli, large differences were found in this study. However, the differences did not seem to be influential on environmental evaluations in this study. Larger samples of participants may benefit this study for more significant results of odour effect.     

Use of zeolite to neutralise nickel in a soil environment

Nickel is a heavy metal which is a stable soil pollutant which is difficult to remediate. An attempt to reduce its impact on the environment can be made by changing its solubility. The right level of hydrogen ions and the content of mineral and organic colloids are crucial in this regard. Therefore, methods to neutralise heavy metals in soil are sought. There are no reports in the literature on the possibility of using minerals in the detoxication of a soil environment contaminated with metals. It is important to fill the gap in research on the effect of zeolites on the microbiological, biochemical and physicochemical properties of soils under pressure from heavy metals. Therefore, a pot experiment was conducted on two soils which examined the effect of various levels of contamination of soil with nickel on the activity of soil enzymes, physical and chemical properties and growth and development of plants. An alleviating effect of zeolite Bio.Zeo.S.01 on the negative impact of nickel on the soil and a plant (oats) was examined. The enzyme activity and the oat yield were found to be significantly and negatively affected by an excess of nickel in the soil, regardless of the soil type. The metal was accumulated more in the oat roots than in the above-ground parts. An addition of zeolite decreased the level of accumulation of nickel in oats grown only on sandy-silty loam. Zeolite Bio.Zeo.S.01 used in the study only slightly alleviated the negative effect of nickel on the biochemical properties of soil. Therefore, its usability in the remediation of soil contaminated with nickel is small.     

Pomacentrid Population Dynamics on Singapore Coral Reefs

Spatial distribution of the pomacentrids on Singapore reefs was assessed visually, while temporal change was studied within permanent quadrats established on a patch reef between 4 Jul and 30 Nov 1989. Partitioning of space, both horizontally and vertically, on the reef was observed in 15 species. The population of territorial damselfishes on the reef flat was less stable than on the reef slope over time, due to the seasonal occurrence of dense stands of the brown macroalgae, Sargassum. Space was found to be a limiting factor at the reef flat due to the high density of pomacentrids found there. Food resource was the limiting factor on the reef slope, where low light intensity due to sedimentation and lack of suitable substrate inhibited turf algal growth. Multi-specific recruitment of juveniles occurred in April and between mid-October and early November.     

Wmo's activities on background atmospheric pollution and integrated monitoring and research

As early as 1968, WMO decided to start a programme on atmospheric pollution. Consequently, a Panel of Experts on Meteorological Aspects of Atmospheric Pollution was established. It was also decided to operate a network of background air pollution monitoring stations. With increasing public concern on environmental pollution impacts, a growing number of WMO Members joined the programme. The Environmental Pollution Monitoring and Research Programme, as well as the World Climate Programme launched in the late seventies, will provide information on a possible influence of pollution on climate.When the network of background ait pollution monitoring started, some Members had already proposed to carry out multimedia monitoring at suitable stations. Later on, it became obvious that more information is required on levels and trends of pollutants in media interacting with the atmosphere and a project on integrated monitoring was established, the purpose of which is to define the objectives and uses of integrated monitoring and to establish procedures for routine standardized integrated monitoring of the of the environment.Pilot projects presently being carried out in a few Member countries are meant to provide most of the information required for the implementation of global background integrated environmental monitorting.     

Speciation and toxicological relevance of manganese in humans

Although manganese is an essential trace element, concerns are rising about the Mn exposure of humans being related to neurotoxic effects. This review summarizes several aspects of this topic to provide updated information on Mn related investigations, including chemical speciation of Mn-compounds. The paper starts with some chemical aspects of Mn and its compounds, enlightening oxidation states in general and in biological matrices. This is followed by considerations on natural sources of human exposure, on occupational sources and on anthropogenically caused environmental sources, for example from the use of methylcyclopentadienyl manganese tricarbonyl (MMT). Next, the paper deals with Mn levels in the human organism, showing normal Mn concentrations in various tissues or body fluids, and continues with the toxicology of Mn, i.e. absorption, distribution and excretion. Of specific concern is the transfer of Mn to the brain which is the relevant neurotoxic target. In this context, parallels and differences between primary and Mn-dependent Parkinsonism are discussed, concluding with a risk assessment and a consideration of susceptible groups. The main part of this review focuses on recent investigations on Mn speciation. Analytical problems and their solutions are also described for correct identification of relevant Mn-compounds in matrices of human origin. Finally, future needs are discussed, such as further investigations on those Mn-species which may overcome neural barrier control, on disease-modulated barrier control, on susceptibility to certain Mn-species, and on the interaction of Mn with Fe-homeostasis in the brain.