金属对催化还原DDT的降解产物及其反应机制的研究

本报告介绍DDT经金属对处理后降解产物的分析鉴定和有关反应机制的初步研究。 降解产物主要是用气相色谱—质谱联用分析鉴定的。水溶液中的DDT用Cu-Zn金属对还原其降解产物经鉴定是DDD、DDMS、DDE_t,它们是DDT分子脱去烷基碳原子上不同数目的氯原子的产物。而在Cu-Fe金属对作用下,水溶液中的DDT的还原则是同时得到四种不同类型的产物。它们是DDT脱去烷基碳原子上的1个和3个氯原子的DDD和DDE_t;DDT脱氯、氧化产物DBP和DBH;DDT脱去HCI生成的DDE;两个DDT分子二聚脱氯的产物TTTB和TTDB。 实验证明金属对对DDT的作用是催化还原反应,金属对起着催化剂和还原剂双重作用。通过实验结果对DDT在金属对作用下的反应机制进行了初步探讨。     

零价铁-过二硫酸盐连续运行体系去除水中硝基苯

水中硝基苯(NB)的高毒性对人体健康具有极大的危害,因此,本文建立了零价铁-过二硫酸盐(Fe0-PS)连续运行体系以降解水中NB.研究结果表明,单独Fe0柱可还原降解NB,Fe0对不同浓度NB的还原效果均较好,随着流速的减慢及初始pH的降低,NB还原效果变好;但还原体系中总有机碳(TOC)基本没有去除,只是生成了中间产物苯胺(AN).Fe0-PS联合体系中,随着PS的投加,产生的Fe2+活化PS,发生了类Fenton反应,从而使还原产物AN得以氧化降解,TOC去除率可达54.8%;随着Fe0填充量的增加,氧化产物Fe2+随之增加,还原产物AN随之减少.可见,Fe0-PS连续运行体系,以Fe2+为媒介巧妙结合还原与氧化作用,能有效去除NB.     

海绵铁三金属降解对硝基苯酚的影响因素及催化机理

通过超声置换反应制备钯铜共修饰海绵铁三金属催化剂（Pd-（Cu-s-Fe⁰））,研究了三金属负载顺序、金属负载量、材料投加量以及重复利用对材料降解对硝基苯酚（PNP）的影响,并利用扫描电子显微镜（SEM）和X射线光电子能谱（XPS）表征材料表面结构特征.结果表明,Pd-（Cu-s-Fe⁰）催化活性高于Cu-（Pd-s-Fe⁰）和（Cu-Pd）-s-Fe⁰;Cu和Pd的最佳负载量分别为5%和0.025%.在100mL初始浓度为100mg/L的PNP溶液中投加3g Pd-（Cu-s-Fe⁰）并超声反应30min,PNP的降解率超过80%,降解反应基本符合一级动力学方程;Pd-（Cu-s-Fe⁰）材料循环利用4次表现出良好的循环利用性能.此外,PNP的主要催化还原产物是对氨基苯酚（PAP）,主要的反应路径是催化还原反应.     

Fe~0催化还原转化水中CCl_4的实验研究

通过在Fe0表面化学沉积Cu、Ag、Pd、Ni构建了Cu/Fe、Ag/Fe、Pd,Fe、Ni/Fe多种双金属催化还原体系.通过序批实验研究了水体中毒性污染物CCl在Fe0以及上述双金属催化Fe0体系中的还原脱氯.结果表明,CCl4在上述5种Fe0还原体系中都能发生快速还原脱氯反应,Cu、Ag、Pd等催化剂的加入能明显提高反应速率.还原脱氯反应服从准一级反应动力学方程,CCl4水溶液在Fe0、Cu/Fe、Ag/Fe、Pd/Fe、Ni/Fe 5种还原体系中的反应速率常数分别为0.039 3、0.092 5、0.158、0.049 6和0.053 3 min-1.使用GC/MS分析了CCl4在各种还原体系中的还原脱氯产物,探讨了水体中CCl4还原脱氯降解的反应途径和可能中间产物.CCL4在不同反应体系中不但反应速率不同而且降解产物也不相同,在Cu/Fe、Ag/Fe体系产物以三氯甲烷、二氯甲烷为主,而在Pd/Fe体系主要为甲烷.逐步氢解是CCl4在Fe0还原体系中发生还原脱氯反应的最主要途径.     

不锈钢粉尘选择性还原镍铬的研究

不锈钢粉尘中含有大量的镍、铬,采用真空电阻炉选择性还原回收其中的镍、铬金属,不仅保护环境,而且可充分利用宝贵的金属资源。研究了还原温度和还原剂对还原过程的影响。结果表明:在合适的温度和还原剂加入量下,产物中镍含量大于8%,铬的含量大于13%,金属回收率大于90%。     

PRB活性介质球磨硫铁矿去除硝基苯

采用机械化学法制备了球磨硫铁矿粉末（BMP）,采用批次实验研究了BMP对硝基苯（NB）的还原性能,采用砂柱实验考察BMP用于填充可渗透反应屏障（PRB）以修复硝基苯污染地下水的可行性.X射线衍射（XRD）、扫描电子显微镜（SEM）、傅立叶变换红外光谱（FT-IR）和X射线光电子能谱（XPS）对BMP反应前后的形态、晶体结构和元素组成进行表征分析.结果表明,BMP可以有效地去除NB,去除率达98.8%,主要还原产物为苯胺（AN）.准一级动力学模型较好地拟合了NB的降解过程,降解动力学常数为59.03×10^-3min^-1.GC-MS分析未检出除AN外的其它污染物.砂柱实验结果表明,BMP-PRB可以连续高效去除模拟地下水中的NB,地下水成分保持稳定,急性毒性显著降低.表征分析表明,BMP对NB及其还原产物有一定的吸附作用.BMP表面持续产生具有还原性的Fe²⁺和S^2-等活性物质,可与NB的强吸电子基团硝基反应生成AN和Fe³⁺,而Fe³⁺氧化硫铁矿会产生Fe²⁺并促进Fe²⁺-Fe³⁺循环.     

生物质基活性炭负载金属催化还原NOx

为研究生物质材料的脱硝性能,利用木质素与纤维素2种生物质基活性炭作为还原剂,用碱金属与过渡金属作为催化活性相,制备了一系列生物质基活性炭负载金属催化剂用于富氧环境中催化还原NO_x,考察了生物质原料种类、炭化温度以及催化剂组分对脱硝效率的影响.结果表明:①当反应温度低于250℃时,炭表面主要是NO_x的吸附过程;而当反应温度高于250℃时,炭还原NO_x行为占主导,并伴随N₂、CO₂与CO的生成.炭化温度对炭反应活性的影响主要依赖于炭化温度对炭材料表面含氧官能团、比表面积以及炭表面金属还原性的影响.②研究中考察的金属（K、Cu、Fe、Ni）均对还原NO_x与O₂有催化作用,其中,K对C-NO_x反应具有明显促进作用,但对C-O₂反应并无明显促进作用,所有样品中SAC-K的选择性因子为0.56,对还原NO_x的选择性最高,且恒温反应过程NO_x还原量（以C计）达到了1 293 μmol/g.③与传统煤基活性炭催化剂相比,木屑基活性炭负载钾催化剂表现出了优良的NO_x还原选择性;X-射线光电子表征结果显示,木屑基活性炭负载钾催化剂优良的性能与其表面钾活性相的高度分散有关.研究显示,相比于煤基炭材料,生物质基炭材料具有更加优异的选择性还原NO_x性能.      

阴极电催化还原降解水中三氯乙烯实验研究

三氯乙烯是地下饮用水中的主要有机污染物之一,广泛应用于金属加工、电子和干洗等行业,由于其土壤吸附性弱、水溶性低,所以很容易在地下水中积累,严重影响人体健康。文章利用独立设计的电化学双室反应装置,进行了阴极电催化还原法降解水中三氯乙烯的实验,并选择了检测降解产物较好的DB-VRX色谱柱,探讨了不同电极电势、电子供体及用量对三氯乙烯降解效果的影响,获得了水相体系中降解三氯乙烯的最佳实验条件。当采用DB-VRX色谱柱,固定阴极电势-0.45V(vs.NHE),电子供体为甲酸0.4 g/L,三氯乙烯初始浓度约为10 mg/L时,经过44 h反应,三氯乙烯的降解率达到了58.2%,并生成二氯甲烷、三氯甲烷等产物。通过GC-MSD对降解产物进行分析,提出了阴极电催化还原降解水中三氯乙烯的机理。     

Fe０催化还原转化水中CCl4的实验研究

通过在Fe^０表面化学沉积Cu、Ag、Pd、Ni构建了Cu/Fe、Ag/Fe、Pd/Fe、Ni/Fe多种双金属催化还原体系.通过序批实验研究了水体中毒性污染物CCl₄在Fe^０以及上述双金属催化Fe^０体系中的还原脱氯.结果表明,CCl₄在上述5种Fe^０还原体系中都能发生快速还原脱氯反应,Cu、Ag、Pd等催化剂的加入能明显提高反应速率.还原脱氯反应服从准一级反应动力学方程,CCl₄水溶液在Fe^０、Cu/Fe、Ag/Fe、Pd/Fe、Ni/Fe 5种还原体系中的反应速率常数分别为0.039 3、0.092 5、0.158、0.049 6和0.053 3　min^-1.使用GC/MS分析了CCl₄在各种还原体系中的还原脱氯产物,探讨了水体中CCl₄还原脱氯降解的反应途径和可能中间产物.CCl₄在不同反应体系中不但反应速率不同而且降解产物也不相同,在Cu/Fe、Ag/Fe体系产物以三氯甲烷、二氯甲烷为主,而在Pd/Fe体系主要为甲烷.逐步氢解是CCl₄在Fe^０还原体系中发生还原脱氯反应的最主要途径.     

乳化纳米铁(EZVI)强化地下水氯代烃还原脱氯

对氯代烃污染地下水进行厌氧微生物还原脱氯时,存在微生物驯化时间长、pH值持续降低、有毒中间产物累积等限制修复效率的问题,为解决上述问题,本课题组制备了一种乳化油(EVO)包覆纳米零价铁(NZVI)的修复试剂,即乳化纳米铁(EZVI),其可以抑制NZVI钝化,增强反应速率并促进厌氧微生物脱氯反应.通过静态批实验探究了EZVI与三氯乙烯的反应动力学及EZVI对四氯乙烯(PCE)还原脱氯的中间代谢产物,并阐明了该过程机理.结果表明EZVI可以有效延缓NZVI钝化、提高反应活性,反应符合一级反应动力学,k_obs=0.182d^-1;EZVI还原PCE可以减少中间产物二氯乙烯的积累,10天内去除PCE达到97.2%,比EVO还原体系提高了68.9%;反应过程中pH值保持在6.5~7.5,ORP值在-50~10mV,提供了良好的还原环境,有效促进了厌氧微生物脱氯反应进行.     

Fe0还原地下水中2,4-DNT影响因素及产物

为了解零价铁(Fe0)修复污染地下水中微量2,4-二硝基甲苯 (2,4-DNT)还原规律,采用序批试验,考察地下水中常见阴离子(Cl-,NO₃-和PO₄3-)及重金属Cr(Ⅵ)对Fe0还原2,4-DNT能力的影响,并分析了Fe0还原2,4-DNT的中间产物和最终产物.结果表明:Cl-与NO₃-均能显著提高2,4-DNT的还原降解率,当反应进行120 min时,溶液中c(Cl-)由0 mmol/L增加到1 mmol/L,Fe0对2,4-DNT的还原降解率由31.4%增加到97.2%;溶液中c(NO₃-)由0 mmol/L增加到1 mmol/L,还原降解率由31.4%增加到78.9%;PO₄3-则表现为明显的抑制作用,当反应进行120 min时,溶液中c(PO₄3-)由0 mmol/L增加到1 mmol/L,还原降解率由31.4%降至2.1%.Cr(Ⅵ)能与2,4-DNT竞争Fe0提供的活性电子,当ρ〔Cr(Ⅵ)〕为20 mg/L时,Cr(Ⅵ)对Fe0还原2,4-DNT能力的抑制作用显著.Fe0还原2,4-DNT的中间产物为4-氨基-2硝基甲苯(4A2NT)和2-氨基-4硝基甲苯(2A4NT),最终产物为2,4-二氨基甲苯(2,4-DAT).因此,在地下水硝基苯类污染物零价铁修复实践中,应考虑地下水中离子组分对反应过程的影响;2,4-DNT的还原最终产物为2,4-DAT,无法进一步降解,需后续处理.      

Monodisperse amino-modified nanosized zero-valent iron for selective and recyclable removal of TNT: Synthesis, characterization, and removal mechanism

Nitroaromatic explosives are major pollutants produced during wars that cause serious environmental and health problems. The removal of a typical nitroaromatic explosive, 2,4,6-trinitrotoluene (TNT), from aqueous solution, was conducted using a new recyclable magnetic nano-adsorbent ([email protected]₂NH₂). This adsorbent was prepared by grafting amino groups onto [email protected]₂ particles with a well-defined core-shell structure and demonstrated monodispersity in solution. The removal performance of the nano-adsorbent towards TNT was found to be 2.57 and 4.92 times higher than that towards two analogous explosives, 2,4-dinitrotoluene (2,4-DNT) and 2-nitrotoluene (2-NT), respectively, under neutral conditions. The difference in the removal performance among the three compounds was further compared in terms of the effects of different conditions (pH value, ionic strength, humic acid concentration, adsorbent modification degree and dosage, etc.) and the electrostatic potential distributions of the three compounds. The most significant elevation is owing to modification of amino on [email protected]₂ which made a 20.7% increase in adsorption efficiency of TNT. The experimental data were well fit by the pseudo-second-order kinetic model and the Freundlich adsorption isotherm model, indicating multilayer adsorption on a heterogeneous surface. The experimental results and theoretical considerations show that the interactions between [email protected]₂NH₂ NPs and TNT correspond to dipole-dipole and hydrophobic interactions. These interactions should be considered in the design of an adsorbent. Furthermore, the adaptability to aqueous environment and excellent regeneration capacity of [email protected]₂NH₂ NPs makes these remediation materials promising for applications.     

Organic pollutants removal from 2,4,6-trinitrotoluene （TNT） red water using low cost activated coke

2,4,6-trinitrotoluene (TNT) red water from Chinese explosive industry was adsorbed by activated coke (AC) from lignite. Since the composition of TNT red water was very complicated, chemical oxygen demand (COD) was used as the index for evaluating the treatment efficiency. This study focused on the sorption kinetics and equilibrium sorption isotherms of AC for the removal of chemical oxygen demand (COD) from TNT red water, and the changes of water quality before and after adsorption were evaluated by using high performance liquid chromatograph (HPLC), UV-vis spectra and Gas Chromatography/Mass Spectroscopy (GC/MS). The results showed that the sorption kinetics of adsorbing COD from TNT red water onto AC was fitted well with the pseudo-second order model. The adsorption process was an exothermic and physical process. The sorption isotherm was in good agreement with Redlich–Peterson isotherm. At the conditions of initial pH, 20℃ and 3 hr of agitation, when the AC dosage was 160 g L-1, 64.8% of COD could be removed. The removal efficiencies of 2,4-dinitrotoluene-3-sulfonate (2,4-DNT-3-SO3-) and 2,4-dinitrotoluene-5-sulfonate (2,4-DNT-5-SO3-) were 80.5% and 84.3%, respectively. After adsorption, the acute toxicity of TNT red water reduced 81.8%, compared with that of unprocessed TNT red water.     

Dechlorination of chlorophenols by zero valent iron impregnated silica

Laboratory studies were conducted to find out the efficacy of uniquely prepared zero valent iron impregnated silica in transforming xenobiotic chlorophenols namely 4-chlorophenol, 2,4-dichlorophenol and 2,4,6-trichlorophenol. Continuous mode column experiments were performed to investigate the transformation of chlorophenols by varying pH, column height, flow rate and initial chlorophenol concentration. Reusability study of the zero valent iron impregnated silica was studied as well as the morphological changes and the chemical composition of the catalyst medium were also investigated. Dechlorination kinetic studies were conducted and the order of dechlorination of chlorophenols was found to be 2,4,6-trichlorophenol > 2,4-dichlorophenol > 4-chlorophenol. The optimum pH, column height and flow rate were found to be 7, 20 cm and 0.75 L/hr respectively for all chlorophenols in the reaction duration of 4 hr. Intermediates formed during dechlorination study were identified by gas chromatography-mass spectroscopy analysis. This method was applied to real pulp and paper wastewater and was found satisfactory.     

硝基芳烃化合物诱发细胞微核的比较研究

利用蚕豆根法细胞和人在淋巴细胞的微核试验对６种硝基芳烃化合物的致突变性进行比较研究，结果表明，邻二硝基苯、间二硝基苯、２，４－二硝基甲苯，２，６－二硝基甲苯，对硝基氯苯和对硝基溴苯均能诱发两咱细胞的微核率增加，除了对硝基溴苯外均具有明显剂量一效应关系。引进标准剂量概念比较５种硝基芳烃人合物的致突变性，结果表明，致突变性强弱依次为２，４－二硝基甲苯〉对硝基氯苯〉间二硝基苯〉２，６－二硝基甲苯〉邻二硝     

Fenton氧化处理爆炸物污染土壤的实验研究

采用摇瓶和玻璃柱试验考察了Fenton氧化处理爆炸物污染土壤中2,4-DNT、2,6-DNT以及COD等的去除效果及其最佳参数.当3%H2O2投加量达到26.46mmol、FeSO4和H2O2的物质的量之比约为1∶73.56时,2,4-DNT和2,6-DNT均可被完全氧化,COD去除率可达到87%.对于2,4-DNT和2,6-DNT,反应时间只需要2h,但要同时去除其它芳香族硝基化合物,则反应时间需要超过8h.土壤直接Fenton氧化的效果并不理想,而对洗出液进行Fenton氧化可以取得很好的效果.通过反应动力学分析和丙酮抑制试验得出,2,4-DNT比2,6-DNT容易氧化.GC-MS分析结果表明,不仅土壤中的2,4-DNT、2,6-DNT可被氧化,其它的硝基芳香族有机化合物也可被氧化去除.     

电压对使用三维电极处理TNT废水的影响

本试验比较了三维电极电解法和二维电极电解法处理TNT废水的效果,考察了采用三维电极电解法时不同槽电压对电解效果的影响,并对电解机理作了初步探讨.实验表明,极板间距为4 cm、电动搅拌器转速250 r/min、电解时间为2h时,最佳的电解槽电压为15 V,此工艺条件下的COD、TOC的去除率分别为77.6%、62.7%.     

不同电子供体下三氯苯酚的还原脱氯机制研究

研究了葡萄糖、乳酸钠、丙酮酸钠、乙酸钠这4种电子供体条件下,2,4,6-三氯苯酚(2,4,6-trichlorophenol,2,4,6-TCP)的降解效果及其还原脱氯途径.结果表明,与葡萄糖的作用相比,乳酸钠、丙酮酸钠、乙酸钠均可有效提高2,4,6-TCP的脱氯效果,其中乳酸钠能作为一类缓释氢物质持续供给2,4,6-TCP还原脱氯所需电子.外加电子供体可提高微生物体内基质代谢脱氢酶活性,反应240 h后,4种电子供体体系中脱氢酶活性增长依次为21.49%、25.78%、136.85%和139.3%.2,4,6-TCP还原脱氯的主要产物包括2,4-二氯苯酚(2,4-dichlorophenol,2,4-DCP)、4-氯苯酚(4-chlorophenol,4-CP)和苯酚,其中乙酸钠作为电子供体时,4-CP为其主要降解产物,转化率达到22%以上.     

预处理方式对氧化-还原联合技术修复硝基苯污染地下水的影响

为了探究氧化与还原预处理对氧化-还原联合技术修复硝基苯污染地下水的影响,选取2,4-DNT（2,4-二硝基甲苯）为研究对象,构建过硫酸盐/铁炭修复技术体系,分别设置2个试验槽,一个试验槽以过硫酸盐作为氧化预处理联合以铁炭作为还原后处理,另一个试验槽以铁炭作为还原预处理联合以过硫酸盐作为氧化后处理,对比研究构建的氧化-还原联合系统中不同氧化与还原预处理方式对2,4-DNT去除机制的影响.结果表明:①过硫酸盐氧化材料填充位置显著影响试验槽pH和ORP（氧化还原电位）的变化,在运行周期5 PV（PV为孔隙体积,1 PV时间约为4 h）内,pH可显著增至11左右,ORP值达到最高.②在运行周期5 PV内,氧化填充层S₂O₈2-浓度和还原填充层Fe2+浓度均显著降低.③在运行周期5 PV内,随运行周期的增加,以过硫酸盐作为氧化预处理联合以铁炭作为还原后处理的协同技术体系对2,4-DNT的去除效果显著降低,以铁炭作为还原预处理联合以过硫酸盐作为氧化后处理的协同技术体系对2,4-DNT的去除率维持在100%.④通过液相-质谱联用技术,识别构建的氧化-还原联合技术体系内2,4-DNT降解的主要中间产物,同时结合铁炭微电解还原机制和过硫酸盐氧化机制提出了2,4-DNT协同处理机制及其可能的降解路径.研究显示,还原预处理更有利于氧化-还原联合技术对地下水中2,4-DNT的去除,可为有效处理硝基苯化合物污染地下水提供理论支撑.      

Degradation and fate of 2,4-dinitroanisole (DNAN) and its intermediates treated with Mg/Cu bimetal: Surface examination with XAS, DFT, and LDI-MS

A novel Mg-based bimetal reagent (Mg/Cu) was used as an enhanced reductive system to degrade insensitive munition 2,4-dinitroanisole (DNAN), a contaminant found in energetic-laden waste. Degradation of DNAN was significantly impacted by dissolved oxygen and studied in anoxic and oxic bimetal systems (i.e., purging with N₂, air, or O₂ gas). Degradation occurred through sequential nitroreduction: first one nitro group was reduced (ortho or para) to form short-lived intermediates 2-amino-4-nitroanisole or 4-amino-2-nitroanisole (2-ANAN or 4-ANAN), and then subsequent reduction of the other nitro group formed 2,4-diaminoanisole (DAAN). The nitro-amino intermediates demonstrated regioselective reduction in the ortho position to 2-ANAN; Regioselectivity was also impacted by the anoxic/oxic environment. Under O₂-purging DNAN degradation rate was slightly enhanced, but most notably O₂ significantly accelerated DAAN generation. DAAN also further degraded only in the oxygenated Mg/Cu system. Adsorption of DNAN byproducts to the reagent occurred regardless of anoxic/oxic condition, resulting in a partition of carbon mass between the adsorbed phase (27%-35%) and dissolved phase (59%-72%). Additional surface techniques were applied to investigate contaminant interaction with Cu. Density functional theory (DFT) calculations identified preferential adsorption structures for DNAN on Cu with binding through two O atoms of one or both nitro groups. X-ray absorption spectroscopy (XAS) measurements determined the oxidation state of catalytic metal Cu and formation of a Cu-O-N bond during treatment. Laser desorption ionization mass spectrometry (LDI-MS) measurements also identified intermediate 2-ANAN adsorbed to the bimetal surface.