Photocatalytic parameters and kinetic study for degradation of dichlorophenol-indophenol (DCPIP) dye using highly active mesoporous TiO2 nanoparticles

Highly active mesoporous TiO_2 of about 6 nm crystal size and 280.7 m~2/g specific surface areas has been successfully synthesized via controlled hydrolysis of titanium butoxide at acidic medium. It was characterized by means of XRD(X-ray diffraction), SEM(scanning electron microscopy), TEM(transmission electron microscopy), FT-IR(Fourier transform infrared spectroscopy), TGA(thermogravimetric analysis), DSC(differential scanning calorimetry) and BET(Brunauer–Emmett–Teller) surface area. The degradation of dichlorophenol-indophenol(DCPIP) under ultraviolet(UV) light was studied to evaluate the photocatalytic activity of samples. The effects of different parameters and kinetics were investigated. Accordingly, a complete degradation of DCPIP dye was achieved by applying the optimal operational conditions of 1 g/L of catalyst, 10 mg/L of DCPIP, pH of 3 and the temperature at 25 ± 3°C after 3 min under UV irradiation. Meanwhile, the Langmuir–Hinshelwood kinetic model described the variations in pure photocatalytic branch in consistent with a first order power law model.The results proved that the prepared TiO_2 nanoparticle has a photocatalytic activity significantly better than Degussa P-25.     

Remarkable promotion effect of trace sulfation on OMS-2 nanorod catalysts for the catalytic combustion of ethanol

OMS-2 nanorod catalysts were synthesized by a hydrothermal redox reaction method using MnSO₄ (OMS-2-SO₄) and Mn(CH₃COO)₂ (OMS-2-AC) as precursors. SO₄^2 −-doped OMS-2-AC catalysts with different SO₄^2 − concentrations were prepared next by adding (NH₄)₂SO₄ solution into OMS-2-AC samples to investigate the effect of the anion SO₄^2 − on the OMS-2-AC catalyst. All catalysts were then tested for the catalytic oxidation of ethanol. The OMS-2-SO₄ catalyst synthesized demonstrated much better activity than OMS-2-AC. The SO₄^2 − doping greatly influenced the activity of the OMS-2-AC catalyst, with a dramatic promotion of activity for suitable concentration of SO₄^2 − (SO₄/catalyst = 0.5% W/W). The samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), inductively coupled plasma optical emission spectroscopy (ICP-OES), NH₃-TPD and H₂-TPR techniques. The results showed that the presence of a suitable amount of SO₄^2 − species in the OMS-2-AC catalyst could decrease the Mn–O bond strength and also enhance the lattice oxygen and acid site concentrations, which then effectively promoted the catalytic activity of OMS-2-AC toward ethanol oxidation. Thus it was confirmed that the better catalytic performance of OMS-2-SO₄ compared to OMS-2-AC is due to the presence of some residual SO₄^2 − species in OMS-2-SO₄ samples.     

New insight into adsorption characteristics and mechanisms of the biosorbent from waste activated sludge for heavy metals

The adsorption characteristics and mechanisms of the biosorbent from waste activated sludge were investigated by adsorbing Pb2+and Zn2+in aqueous single-metal solutions. A p H value of the metal solutions at 6.0 was beneficial to the high adsorption quantity of the biosorbent. The optimal mass ratio of the biosorbent to metal ions was found to be 2. A higher adsorption quantity of the biosorbent was achieved by keeping the reaction temperature below 55°C. Response surface methodology was applied to optimize the biosorption processes, and the developed mathematical equations showed high determination coefficients(above 0.99 for both metal ions) and insignificant lack of fit(p = 0.0838 and 0.0782 for Pb2+and Zn2+, respectively). Atomic force microscopy analyses suggested that the metal elements were adsorbed onto the biosorbent surface via electrostatic interaction. X-ray photoelectron spectroscopy analyses indicated the presence of complexation(between –NH2,-CN and metal ions) and ion-exchange(between –COOH and metal ions). The adsorption mechanisms could be the combined action of electrostatic interaction, complexation and ion-exchange between functional groups and metal ions.     

Insight into the adsorption of tetracycline onto amino and amino–Fe functionalized mesoporous silica: Effect of functionalized groups

In order to study the influences of functionalized groups onto the adsorption of tetracycline (TC), we prepared a series of amino and amino–Fe^3 + complex mesoporous silica adsorbents with diverse content of amino and Fe^3 + groups (named N,N-SBA15 and Fe-N,N-SBA15). The resulting mesoporous silica adsorbents were fully characterized by X-ray powder diffraction, Fourier transform infrared spectrometer and N₂ adsorption/desorption isotherms. Furthermore, the effects of functionalized groups on the removal of TC were investigated. The results showed that the periodic ordered structure of SBA-15 was maintained after modification of amino/Fe^3 + groups. The functionalized amino groups decreased the adsorption capacity while the coordinated Fe^3 + increased the adsorption capacity. The adsorption kinetics of TC fitted pseudo-second-order model well and the equilibrium was achieved quickly. The adsorption isotherms fitted the Langmuir model well and with the Fe^3 + content increased from 3.93% to 8.26%, the Q_max of the adsorbents increased from 102 to 188 mmol/kg. The solution pH affected the adsorption of TC onto amino complex adsorbents slightly while influenced the adsorption onto Fe-amine complex adsorbents greatly. The adsorption of TC on SBA15 and N,N-SBA15 may be related to the formation of outer-sphere surface complexes, while the adsorption of TC onto Fe-N,N-SBA15 was mainly attributed to the inner-sphere surface complexes. This study could offer potential materials that have excellent adsorption behavior for environmental remediation and suggested useful information for the preparing other adsorbents in environmental applications.     

Insights into properties of activated carbons prepared from different raw precursors by pyrophosphoric acid activation

Low-cost activated carbons (ACs) were prepared from four kinds of solid wastes: petroleum coke, Enteromorpha prolifera, lignin from papermaking black liquid and hair, by pyrophosphoric acid (H₄P₂O₇) activation. Thermo-gravimetric analysis of the pyrolysis of H₄P₂O₇-precursor mixtures implied that H₄P₂O₇ had different influences on the pyrolysis behavior of the four raw materials. N₂ adsorption/desorption isotherms, scanning electron microscopy, Fourier transform infrared spectroscopy and adsorption capacities for dyes were used to characterize the prepared activated carbons. AC derived from E. prolifera exhibited the highest surface area (1094 m²/g) and maximum monolayer adsorption capacity for malachite green (1250 mg/g). Kinetic studies showed that the experimental data were in agreement with the pseudo-second-order model. The adsorption isotherms were well described by the Langmuir isotherm model, indicating the adsorption of dye onto the ACs proceeded by monolayers.     

Emissions from the combustion of eucalypt and pine chips in a fluidized bed reactor

Interest in renewable energy sources has increased in recent years due to environmental concerns about global warming and air pollution,reduced costs and improved efficiency of technologies.Under the European Union(EU)energy directive,biomass is a suitable renewable source.The aim of this study was to experimentally quantify and characterize the emission of particulate matter(PM_(2.5))resulting from the combustion of two biomass fuels(chipped residual biomass from pine and eucalypt),in a pilot-scale bubbling fluidized bed(BFB)combustor under distinct operating conditions.The variables evaluated were the stoichiometry and,in the case of eucalypt,the leaching of the fuel.The CO and PM_(2.5)emission factors were lower when the stoichiometry used in the experiments was higher(0.33±0.1 g CO/kg and 16.8±1.0 mg PM_(2.5)/kg,dry gases).The treatment of the fuel by leaching before its combustion has shown to promote higher PM_(2.5)emissions(55.2±2.5 mg/kg,as burned).Organic and elemental carbon represented 3.1 to 30 wt.% of the particle mass,while carbonate(CO_3~(2-))accounted for between 2.3 and 8.5 wt.%.The particulate mass was mainly composed of inorganic matter(71% to 86% of the PM_(2.5)mass).Compared to residential stoves,BFB combustion generated very high mass fractions of inorganic elements.Chloride was the water soluble ion in higher concentration in the PM_(2.5)emitted by the combustion of eucalypt,while calcium was the dominant water soluble ion in the case of pine.     

小麦秸杆对水中Pb（2＋）和Cd（2＋）的吸附特性

以农业废弃物小麦秸杆为吸附材料,探讨了小麦秸杆对Pb2＋、Cd2＋的吸附特性,重点研究了吸附时间、离子浓度、溶液pH值等对小麦秸杆吸附Pb2＋、Cd2＋的影响.结果表明,溶液pH值对吸附的影响大,在pH 2.0～6.0范围内,吸附量随溶液初始pH值的升高而升高.小麦秸杆吸附Pb2＋、Cd2＋的速度快,吸附动力学过程可以...     

Roles of SO2 oxidation in new particle formation events

The oxidation of SO₂ is commonly regarded as a major driver for new particle formation (NPF) in the atmosphere. In this study, we explored the connection between measured mixing ratio of SO₂ and observed long-term (duration > 3 hr) and short-term (duration <1.5 hr) NPF events at a semi-urban site in Toronto. Apparent NPF rates (J₃₀) showed a moderate correlation with the concentration of sulfuric acid ([H₂SO₄]) calculated from the measured mixing ratio of SO₂ in long-term NPF events and some short-term NPF events (Category I) (R² = 0.66). The exponent in the fitting line of J₃₀ ~ [H₂SO₄]ⁿ in these events was 1.6. It was also found that SO₂ mixing ratios varied a lot during long-term NPF events, leading to a significant variation of new particle counts. In the SO₂-unexplained short-term NPF events (Category II), analysis showed that new particles were formed aloft and then mixed down to the ground level. Further calculation results showed that sulfuric acid oxidized from SO₂ probably made a negligible contribution to the growth of >10 nm new particles.     

Roles of SO2 oxidation in new particle formation events

The oxidation of SO₂ is commonly regarded as a major driver for new particle formation (NPF) in the atmosphere. In this study, we explored the connection between measured mixing ratio of SO₂ and observed long-term (duration > 3 hr) and short-term (duration < 1.5 hr) NPF events at a semi-urban site in Toronto. Apparent NPF rates (J₃₀) showed a moderate correlation with the concentration of sulfuric acid ([H₂SO₄]) calculated from the measured mixing ratio of SO₂ in long-term NPF events and some short-term NPF events (Category I) (R² = 0.66). The exponent in the fitting line of J₃₀ ~ [H₂SO₄]ⁿ in these events was 1.6. It was also found that SO₂ mixing ratios varied a lot during long-term NPF events, leading to a significant variation of new particle counts. In the SO₂-unexplained short-term NPF events (Category II), analysis showed that new particles were formed aloft and then mixed down to the ground level. Further calculation results showed that sulfuric acid oxidized from SO₂ probably made a negligible contribution to the growth of > 10 nm new particles.     

Adsorption and desorption of SO2, NO and chlorobenzene on activated carbon

Activated carbon (AC) is very effective for multi-pollutant removal; however, the complicated components in flue gas can influence each other''s adsorption. A series of adsorption experiments for multicomponents, including SO₂, NO, chlorobenzene and H₂O, on AC were performed in a fixed-bed reactor. For single-component adsorption, the adsorption amount for chlorobenzene was larger than for SO₂ and NO on the AC. In the multi-component atmosphere, the adsorption amount decreased by 27.6% for chlorobenzene and decreased by 95.6% for NO, whereas it increased by a factor of two for SO₂, demonstrating that a complex atmosphere is unfavorable for chlorobenzene adsorption and inhibits NO adsorption. In contrast, it is very beneficial for SO₂ adsorption. The temperature-programmed desorption (TPD) results indicated that the binding strength between the gas adsorbates and the AC follows the order of SO₂ > chlorobenzene > NO. The adsorption amount is independent of the binding strength. The presence of H₂O enhanced the component effects, while it weakened the binding force between the gas adsorbates and the AC. AC oxygen functional groups were analyzed using TPD and X-ray photoelectron spectroscopy (XPS) measurements. The results reveal the reason why the chlorobenzene adsorption is less affected by the presence of other components. Lactone groups partly transform into carbonyl and quinone groups after chlorobenzene desorption. The chlorobenzene adsorption increases the number of C = O groups, which explains the positive effect of chlorobenzene on SO₂ adsorption and the strong NO adsorption.     

Effect of liming on sulfate transformation and sulfur gas emissions in degraded vegetable soil treated by reductive soil disinfestation

Reductive soil disinfestation (RSD), namely amending organic materials and mulching or flooding to create strong reductive status, has been widely applied to improve degraded soils. However, there is little information available about sulfate (SO₄^2 −) transformation and sulfur (S) gas emissions during RSD treatment to degraded vegetable soils, in which S is generally accumulated. To investigate the effects of liming on SO₄^2 − transformation and S gas emissions, two SO₄^2 −-accumulated vegetable soils (denoted as S1 and S2) were treated by RSD, and RSD plus lime, denoted as RSD₀ and RSD₁, respectively. The results showed that RSD₀ treatment reduced soil SO₄^2 − by 51% and 61% in S1 and S2, respectively. The disappeared SO₄^2 − was mainly transformed into the undissolved form. During RSD treatment, hydrogen sulfide (H₂S), carbonyl sulfide (COS), and dimethyl sulfide (DMS) were detected, but the total S gas emission accounted for < 0.006% of total S in both soils. Compared to RSD₀, lime addition stimulated the conversion of SO₄^2 − into undissolved form, reduced soil SO₄^2 − by 81% in S1 and 84% in S2 and reduced total S gas emissions by 32% in S1 and 57% in S2, respectively. In addition to H₂S, COS and DMS, the emissions of carbon disulfide, methyl mercaptan, and dimethyl disulfide were also detected in RSD₁ treatment. The results indicated that RSD was an effective method to remove SO₄^2 −, liming stimulates the conversion of dissolved SO₄^2 − into undissolved form, probably due to the precipitation with calcium.     

Preparation and evaluation of aminopropyl-functionalized manganese-loaded SBA-15 for copper removal from aqueous solution

A novel material, aminopropyl-functionalized manganese-loaded SBA-15 (NH₂-Mn-SBA-15), was synthesized by bonding 3-aminopropyl trimethoxysilane (APTMS) onto manganese-loaded SBA-15 (Mn-SBA-15) and used as a Cu^2 + adsorbent in aqueous solution. Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction spectra (XRD), N₂ adsorption/desorption isotherms, high resolution field emission scanning electron microscopy (FESEM) and X-ray photoelectron spectroscopy (XPS) were used to characterize the NH₂-Mn-SBA-15. The ordered mesoporous structure of SBA-15 was remained after modification. The manganese oxides were mainly loaded on the internal surface of the pore channels while the aminopropyl groups were mainly anchored on the external surface of SBA-15. The adsorption of Cu^2 + on NH₂-Mn-SBA-15 was fitted well by the Langmuir equation and the maximum adsorption capacity of NH₂-Mn-SBA-15 for Cu^2 + was over two times higher than that of Mn-SBA-15 under the same conditions. The Elovich equation gave a good fit for the adsorption process of Cu^2 + by NH₂-Mn-SBA-15 and Mn-SBA-15. Both the loaded manganese oxides and the anchored aminopropyl groups were found to contribute to the uptake of Cu^2 +. The NH₂-Mn-SBA-15 showed high selectivity for copper ions. Consecutive adsorption–desorption experiments showed that the NH₂-Mn-SBA-15 could be regenerated by acid treatment without altering its properties.     

红外光谱技术结合聚类分析用于海洋绿藻分类研究

利用傅里叶红外光谱研究了10种南极绿藻和6种浒苔,结果显示,傅里叶变换红外光谱主要由蛋白质、脂类化合物及多糖的振动吸收带组成。通过比较两类绿藻原始谱图,发现它们极为相似,在2000～500 cm-1范围内,即多糖吸收区有较小的差别。选取2000～500 cm-1范围的一阶导数进行系统聚类分析。10种南极绿藻、6种浒苔按其红外一阶导数的内在数理统计规律划归两类,南极绿藻为一类,浒苔为一类。傅里叶变换红外光谱技术结合化学统计学方法,为海洋藻类的分类研究提供一种新的方法。     

Heterogeneous oxidation of SO2 by O3-aged black carbon and its dithiothreitol oxidative potential

Ozone (O₃) is an important atmospheric oxidant. Black carbon (BC) particles released into the atmosphere undergo an aging process via O₃ oxidation. O₃-aged BC particles may change their uptake ability toward trace reducing gases such as SO₂ in the atmosphere, leading to different environmental and health effects. In this paper, the heterogeneous reaction process between O₃-aged BC and SO₂ was explored via in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Combined with ion chromatography (IC), DRIFTS was used to qualitatively and quantitatively analyze the sulfate product. The results showed that O₃-aged BC had stronger SO₂ oxidation ability than fresh BC, and the reactive species/sites generated on the surface had an important role in the oxidation of SO₂. Relative humidity or 254 nm UV (ultraviolet) light illumination enhanced the oxidation uptake of SO₂ on O₃-aged BC. The oxidation potentials of the BC particles were detected via dithiothreitol (DTT) assay. The DTT activity over BC was decreased in the process of SO₂ reduction, with the consumption of oxidative active sites.     

Biphasic reduction model for predicting the impacts of dye-bath constituents on the reduction of tris-azo dye Direct Green-1 by zero valent iron (Fe)

Influence of common dye-bath additives, namely sodium chloride, ammonium sulphate, urea, acetic acid and citric acid, on the reductive decolouration of Direct Green 1 dye in the presence of Fe⁰ was investigated. Organic acids improved dye reduction by augmenting Fe⁰ corrosion, with acetic acid performing better than citric acid. NaCl enhanced the reduction rate by its ‘salting out’ effect on the bulk solution and by Cl⁻ anion-mediated pitting corrosion of iron surface. (NH₄)₂SO₄ induced ‘salting out’ effect accompanied by enhanced iron corrosion by SO₄^2 − anion and buffering effect of NH₄⁺ improved the reduction rates. However, at 2 g/L (NH₄)₂SO₄ concentration, complexating of SO₄^2 − with iron oxides decreased Fe⁰ reactivity. Urea severely compromised the reduction reaction, onus to its chaotropic and ‘salting in’ effect in solution, and due to it masking the Fe⁰ surface. Decolouration obeyed biphasic reduction kinetics (R² > 0.993 in all the cases) exhibiting an initial rapid phase, when more than 95% dye reduction was observed, preceding a tedious phase. Maximum rapid phase reduction rate of 0.955/min was observed at pH 2 in the co-presence of all dye-bath constituents. The developed biphasic model reckoned the influence of each dye-bath additive on decolouration and simulated well with the experimental data obtained at pH 2.     

Role of secondary aerosols in haze formation in summer in the Megacity Beijing

A field experiment from 18 August to 8 September 2006 in Beijing, China, was carried out. A hazy day was defined as visibility < l0 km and RH (relative humidity) < 90%. Four haze episodes, which accounted for ~ 60% of the time during the whole campaign, were characterized by increases of SNA (sulfate, nitrate, and ammonium) and SOA (secondary organic aerosol) concentrations. The average values with standard deviation of SO₄^2 −, NO₃⁻, NH₄⁺ and SOA were 49.8 (± 31.6), 31.4 (± 22.3), 25.8 (± 16.6) and 8.9 (± 4.1) μg/m³, respectively, during the haze episodes, which were 4.3, 3.4, 4.1, and 1.7 times those in the non-haze days. The SO₄^2 −, NO₃⁻, NH₄⁺, and SOA accounted for 15.8%, 8.8%, 7.3%, and 6.0% of the total mass concentration of PM₁₀ during the non-haze days. The respective contributions of SNA species to PM₁₀ rose to about 27.2%, 15.9%, and 13.9% during the haze days, while the contributions of SOA maintained the same level with a slight decrease to about 4.9%. The observed mass concentrations of SNA and SOA increased with the increase of PM₁₀ mass concentration, however, the rate of increase of SNA was much faster than that of the SOA. The SOR (sulfur oxidation ratio) and NOR (nitrogen oxidation ratio) increased from non-haze days to hazy days, and increased with the increase of RH. High concentrations of aerosols and water vapor favored the conversion of SO₂ to SO₄^2 − and NO₂ to NO₃⁻, which accelerated the accumulation of the aerosols and resulted in the formation of haze in Beijing.     

Influences of anion concentration and valence on dispersion and aggregation of titanium dioxide nanoparticles in aqueous solutions

Dispersion and aggregation of nanoparticles in aqueous solutions are important factors for safe application of nanoparticles. In this study, dispersion and aggregation of nano-TiO₂ in aqueous solutions containing various anions were investigated. The influences of anion concentration and valence on the aggregation size, zeta potential and aggregation kinetics were individually investigated. Results showed that the zeta potential decreased from 19.8 to − 41.4 mV when PO₄^3 − concentration was increased from 0 to 50 mg/L, while the corresponding average size of nano-TiO₂ particles decreased from 613.2 to 540.3 nm. Both SO₄^2 − and NO₃⁻ enhanced aggregation of nano-TiO₂ in solution. As SO₄^2 − concentration was increased from 0 to 500 mg/L, the zeta potential decreased from 19.8 to 1.4 mV, and aggregate sizes increased from 613.2 to 961.3 nm. The trend for NO₃⁻ fluctuation was similar to that for SO₄^2 − although the range of variation for NO₃⁻ was relatively narrow. SO₄^2 − and NO₃⁻ accelerated the aggregation rapidly, while PO₄^3 − did so slowly. These findings facilitate the understanding of aggregation and dispersion mechanisms of nano-TiO₂ in aqueous solutions in the presence of anions of interest.     

Simultaneous removal of Cu(II) and Cr(VI) by Mg–Al–Cl layered double hydroxide and mechanism insight

Mg–Al–Cl layered double hydroxide (Cl-LDH) was prepared to simultaneously remove Cu(II) and Cr(VI) from aqueous solution. The coexisting Cu(II) (20 mg/L) and Cr(VI) (40 mg/L) were completely removed within 30 min by Cl-LDH in a dosage of 2.0 g/L; the removal rate of Cu(II) was accelerated in the presence of Cr(VI). Moreover, compared with the adsorption of single Cu(II) or Cr(VI), the adsorption capacities of Cl-LDH for Cu(II) and Cr(VI) can be improved by 81.05% and 49.56%, respectively, in the case of coexisting Cu(II) (200 mg/L) and Cr(VI) (400 mg/L). The affecting factors (such as solution initial pH, adsorbent dosage, and contact time) have been systematically investigated. Besides, the changes of pH values and the concentrations of Mg²⁺ and Al³⁺ in relevant solutions were monitored. To get the underlying mechanism, the Cl-LDH samples before and after adsorption were thoroughly characterized by X-ray powder diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. On the basis of these analyses, a possible mechanism was proposed. The coadsorption process involves anion exchange of Cr(VI) with Cl⁻ in Cl-LDH interlayer, isomorphic substitution of Mg²⁺ with Cu²⁺, formation of Cu₂Cl(OH)₃ precipitation, and the adsorption of Cr(VI) by Cu₂Cl(OH)₃. This work provides a new insight into simultaneous removal of heavy metal cations and anions from wastewater by Cl-LDH.     

Continuous desulfurization and bacterial community structure of an integrated bioreactor developed to treat SO2 from a gas stream

Sulfide dioxide(SO2) is often released during the combustion processes of fossil fuels. An integrated bioreactor with two sections, namely, a suspended zone(SZ) and immobilized zone(IZ), was applied to treat SO2 for 6 months. Sampling ports were set in both sections to investigate the performance and microbial characteristics of the integrated bioreactor. SO2 was effectively removed by the synergistic effect of the SZ and IZ, and more than 85%removal efficiency was achieved at steady state. The average elimination capacity of SO2 in the bioreactor was 2.80 g/(m3·hr) for the SZ and 1.50 g/(m3· hr) for the IZ. Most SO2 was eliminated in the SZ. The liquid level of the SZ and the water content ratio of the packing material in the IZ affected SO2 removal efficiency. The SZ served a key function not only in SO2 elimination, but also in moisture maintenance for the IZ. The desired water content in IZ could be feasibly maintained without any additional pre-humidification facilities. Clone libraries of 16 S r DNA directly amplified from the DNA of each sample were constructed and sequenced to analyze the community composition and diversity in the individual zones.The desulfurization bacteria dominated both zones. Paenibacillus sp. was present in both zones, whereas Ralstonia sp. existed only in the SZ. The transfer of SO2 to the SZ involved dissolution in the nutrient solution and biodegradation by the sulfur-oxidizing bacteria.This work presents a potential biological treatment method for waste gases containing hydrophilic compounds.     

Composition and source apportionment of dust fall around a natural lake

The aim of this study was to determine the source apportionment of dust fall around Lake Chini, Malaysia. Samples were collected monthly between December 2012 and March2013 at seven sampling stations located around Lake Chini. The samples were filtered to separate the dissolved and undissolved solids. The ionic compositions(NO-3, SO2-4, Cl-and NH+4) were determined using ion chromatography(IC) while major elements(K, Na, Ca and Mg) and trace metals(Zn, Fe, Al, Ni, Mn, Cr, Pb and Cd) were determined using inductively coupled plasma mass spectrometry(ICP-MS). The results showed that the average concentration of total solids around Lake Chini was 93.49 ± 16.16 mg/(m2·day). SO2-4, Na and Zn dominated the dissolved portion of the dust fall. The enrichment factors(EF) revealed that the source of the trace metals and major elements in the rain water was anthropogenic, except for Fe. Hierarchical agglomerative cluster analysis(HACA) classified the seven monitoring stations and 16 variables into five groups and three groups respectively. A coupled receptor model, principal component analysis multiple linear regression(PCA-MLR), revealed that the sources of dust fall in Lake Chini were dominated by agricultural and biomass burning(42%),followed by the earth's crust(28%), sea spray(16%) and a mixture of soil dust and vehicle emissions(14%).