Adsorption and desorption of steroid hormones on saline soil

● Organic matter content significantly affected adsorption of E2/EE2 on saline soil. ● EE2 possessed higher competition intensity for adsorption sites than E2. ● The adsorption of E2/EE2 on saline soil was a spontaneous exothermic process. ● Desorption capacity of EE2/E2 accounted for 40%/78% of the total adsorption capacity. Soil organic matter content was the main driving factor affecting adsorption and desorption process of 17β-estradiol (E2) and 17α-ethynylestradiol (EE2) on saline soil. The adsorption and desorption of E2 and EE2 on three saline soils showed the similar behavior that soil with the highest organic content possessed the highest adsorption capacity and the lowest desorption capacity for E2 and EE2. The adsorption capacity of untreated soil samples (with organic matter) was larger than that of soil samples without organic matter. For soil with the largest adsorption capacity, adsorption capacity of E2/EE2 on the untreated soil and soil colloid (with organic matter) respectively reached 0.15/0.30 μg/g and 0.16/0.33 μg/g while the soil and soil colloid without organic matter hardly adsorbed pollutants. The adsorption capacity of E2/EE2 at the initial concentration of 100 μg/L was 25/15 times higher than that at the initial concentration of 5 μg/L. E2 and EE2 had the same adsorption sites on saline soil while EE2 possessed higher competition intensity for adsorption sites than E2. Pseudo-first-order model (R² = 0.995–0.986) and Langmuir model (R² = 0.989–0.999) could better fit the adsorption process of E2 or EE2. The thermodynamic study further showed that the adsorption of E2/EE2 on saline soil was a spontaneous exothermic process. The desorption capacity of EE2/E2 accounted for 40%/78% of the total adsorption capacity to possibly exert potential risk to the groundwater. The variation of the salinity led to the variation of soil organic carbon which subsequently changed the adsorption and desorption behaviors of endocrine disrupting chemicals in coastal saline soil. This study provides a new insight on the interfacial behavior of endocrine disrupting chemicals on saline soil.     

Removal efficiencies of natural and synthetic progesterones in hospital wastewater treated by different disinfection processes

● The concentrations of 61 progesterones in HWW, PFTE, SBTE were evaluated. ● The removal efficiencies of progesterones by PFT and SBT were identified. ● Compared the removal efficiencies of progeste rones in five disinfection processes. Progesterones are ubiquitous in hospital wastewater (HWW) with concentrations much higher than those of estrogens and androgens. To ensure that these water systems are safe to use, disinfection is crucial during HWW treatment by providing “front line” defense against biological contaminations. Here, five disinfection processes, namely, chlorine (Cl₂), chlorine dioxide (ClO₂), ozone (O₃), ultraviolet (UV)), and UV/chlorine (UV/Cl₂), were selected to investigate their removal efficiencies for progesterones in primary filtration and secondary biological treatment effluents. There were 61 natural and synthetic progesterones detected in HWW, with the natural progesterones being the main components with a concentration of 845.51 ng/L and contributing to 75.08% of the total progesterones. The primary filtration treatment presented insignificant removal effects on the progesterones, while the secondary biological treatment significantly reduced the progesterone content by biodegradation. The order of removal efficiencies of total progesterones by different disinfection processes was UV/Cl₂ > Cl ₂ > O ₃ > ClO ₂ > UV. UV/Cl ₂ showed the highest removal efficiency against progesterones mainly due to the activation of Cl₂ by ultraviolet (UV) photolysis, which helps open the heterocyclic, aromatic, and phenolic rings, thus accelerating progesterone degradation. In addition, the removal efficiencies of natural progesterones in the five disinfection processes were higher than those of synthetic progesterones (progesterone derivatives, 19-nortestosterone derivatives, and 17α-hydroxyprogesterone derivatives).     

Highly effective visible-photocatalytic hydrogen evolution and simultaneous organic pollutant degradation over an urchin-like oxygen-doped MoS2/ZnIn2S4 composite

● An urchin-like OMS/ZIS composite was fabricated by a facile solvothermal method. ● The OMS/ZIS exhibits superior photocatalytic H₂ evolution for organics degradation. ● A probable mechanism of dual-functional photocatalysis was proposed in detail. ● This work provides an inspiration for rational design of dual-functional catalysts. Achieving hydrogen production and simultaneous decomposition of organic pollutants through dual-functional photocatalytic reactions has received increasing attention due to the environmentally friendly and cost-effective characteristics of this approach. In this work, an urchin-like oxygen-doped MoS₂/ZnIn₂S₄ (OMS/ZIS) composite was fabricated for the first time using a simple solvothermal method. The unique microstructure with abundant active sites and fast charge transfer channels further shortened the charge migration distance and compressed carrier recombination. The obtained composite exhibited an efficient H₂ evolution reaction rate of 12.8 mmol/g/h under visible light, which was nearly times higher than pristine ZnIn₂S₄, and the apparent quantum efficiency was 14.9% (420 nm). The results of the simultaneous photocatalytic H₂ evolution and organic pollutant decomposition test were satisfactory, resulting in decomposition efficiencies of resorcinol, tetracycline, and bisphenol A that reached 41.5%, 63.5%, and 53.0% after 4 h, respectively, and the highest H₂ evolution rate was 672.7 μmol/g/h for bisphenol A. Furthermore, natural organic matter (NOM) abundantly found in actual water was adopted as an electron donor for H production under simulated sunlight irradiation, indicating the promising practicability of simultaneous hydrogen evolution and NOM decomposition. Moreover, the mechanisms of the dual-purpose photocatalytic reactions, as well as the synergistic effect between the molecular structures of the organic pollutants and the corresponding adsorption behavior on the photocatalyst surface were illustrated in detail. These obtained results may serve as an inspiration for the rational design of highly efficient, dual-functional photocatalysts in the future.     

Electroconductive RGO-MXene membranes with wettability-regulated channels: improved water permeability and electro-enhanced rejection performance

● Electroconductive RGO-MXene membranes were fabricated. ● Wettable membrane channels were established between RGO and MXene nanosheets. ● Hydrophilic MXene reduces the resistance of water entering the membrane channels. ● Water permeance of RGO-MXene membrane is 16.8 times higher than that of RGO membrane. ● Electro-assistance can enhance the dye rejection performance of RGO-MXene membrane. Reduced graphene oxide (RGO) membranes are theoretically more conducive to the rapid transport of water molecules in their channels compared with graphene oxide (GO) membranes, as they have fewer oxygen-containing functional groups and more non-oxidized regions. However, the weak hydrophilicity of RGO membranes inhibits water entry into their channels, resulting in their low water permeability. In this work, we constructed wettable RGO-MXene channels by intercalating hydrophilic MXene nanosheets into the RGO membrane for improving the water permeance. The RGO-MXene composite membrane exhibits high pure water permeance of 62.1 L/(m²·h·bar), approximately 16.8 times that of the RGO membrane (3.7 L/(m²·h·bar)). Wettability test results and molecular dynamics simulations suggest that the improved water permeance results from the enhanced wettability of RGO-MXene membrane and increased rate of water molecules entering the RGO-MXene channels. Benefiting from good conductivity, the RGO-MXene membrane with electro-assistance exhibits significantly increased rejection rates for negatively charged dyes (from 56.0% at 0 V to 91.4% at 2.0 V for Orange G) without decreasing the permeate flux, which could be attributed to enhanced electrostatic repulsion under electro-assistance.     

Effectiveness of tertiary treatment processes in removing different classes of emerging contaminants from domestic wastewater

● Different advanced treatment processes were tested for ECs removal from wastewater. ● UV radiation showed low to moderate removal for 5 of the 38 micropollutants. ● Among tested membrane processes, nanofiltration showed the better performance. ● The use of PAC achieved high or partially removal for 31 out of the 38 compounds. ● The environmental and economical evaluation of a pilot-scale PAC unit is suggested. In this work, 38 different organic emerging contaminants (ECs), belonging to various chemical classes such as pharmaceuticals (PhCs), endocrine-disrupting chemicals (EDCs), benzotriazoles (BTRs), benzothiazoles (BTHs), and perfluorinated compounds (PFCs), were initially identified and quantified in the biologically treated wastewater collected from Athens’ (Greece) Sewage Treatment Plant (STP). Processes already used in existing STPs such as microfiltration (MF), nanofiltration (NF), ultrafiltration (UF), UV radiation, and powdered activated carbon (PAC) were assessed for ECs’ removal, under the conditions that represent their actual application for disinfection or advanced wastewater treatment. The results indicated that MF removed only one out of the 38 ECs and hence it was selected as pretreatment step for the other processes. UV radiation in the studied conditions showed low to moderate removal for 5 out of the 38 ECs. NF showed better results than UF due to the smaller pore sizes of the filtration system. However, this enhancement was observed mainly for 8 compounds originating from the classes of PhCs and PFCs, while the removal of EDCs was not statistically significant. Among the various studied technologies, PAC stands out due to its capability to sufficiently remove most ECs. In particular, removal rates higher than 70% were observed for 9 compounds, 22 were partially removed, while 7 demonstrated low removal rates. Based on our screening experiments, future research should focus on scaling-up PAC in actual conditions, combining PAC with other processes, and conduct a complete economic and environmental assessment of the treatment.     

Fluorescence detection of phosphate in an aqueous environment by an aluminum-based metal-organic framework with amido functionalized ligands

● A novel Al-MOF was successfully synthesized by a facile solvothermal method. ● Al-MOF showed superior performance for phosphate detection. ● High selectivity and anti-interference for detection were demonstrated. ● The high coordination between Al-O and PO₄³⁻ was the key in fluorescence sensing. The on-site monitoring of phosphate is important for environmental management. Conventional phosphate detection methods are not appropriate to on-site monitoring owing to the use of complicated detection procedures, and the consequent high cost and maintenance requirements of the detection apparatus. Here, a highly sensitive fluorescence-based method for phosphate detection with a wide detection range was developed based on a luminescent aluminum-based metal-organic framework (Al-MOF). The Al-MOF was prepared by introducing amine functional groups to conventional MIL to enhance phosphate binding, and exhibited excellent fluorescence properties that originated from the ligand-to-metal charge transfer (LMCT). The detection limit was as low as 3.25 μmol/L (0.10 mg/L) and the detection range was as wide as 3–350 μmol/L (0.10–10.85 mg/L). Moreover, Al-MOF displayed specific recognition toward phosphate over most anions and metal cations, even for a high concentration of the co-existent ions. The mechanism of phosphate detection was analyzed through the characterization of the combination of Al-MOF and phosphate, and the results indicated the high affinity between Al-O and phosphate inhibited that the LMCT process and recovered the intrinsic fluorescence of NH₂-H₂BDC. The recovery of the developed detection method reached a satisfactory range of 85.1%–111.0%, and the feasibility of on-site phosphate detection was verified using a prototype sensor for tap water and lake water samples. It was demonstrated that the prepared Al-MOF is highly promising for on-site detection of phosphate in an aqueous environment.     

V-shaped substrate for surface and volume enhanced Raman spectroscopic analysis of microplastics

● V-shaped substrate was obtained for SERS analysis of microplastics (diameter ≈ 1 μm). ● Enhancement factor of V-shaped substrate can reach 20 in microplastics detection. ● V-shaped nanopore array can bring additional volume enhancement. ● V-shaped substrate was more economic in application compared to Klarite substrate. Research on the microplastics (MPs) is developing towards smaller size, but corresponding methods for the rapid and accurate detection of microplastics, especially nanoplastics still present challenge. In this work, a novel surface and volume enhanced Raman spectroscopy substrate was developed for the rapid detection of microplastic particles below 5 μm. The gold nanoparticles (NPs) were deposited onto the surface and into the V-shaped nanopores of anodized aluminum oxide (AAO) through magnetron sputtering or ion sputtering, and then AuNPs@V-shaped AAO SERS substrate was obtained and studied for microplastic detection. SERS performance of AuNPs@V-shaped AAO SERS substrate was evaluated through the detection of polystyrene and polymethyl methacrylate microspheres. Results indicated that individual polystyrene sphere with a diameter of 1 μm can be well detected on AuNPs@V-shaped AAO SERS substrate, and the maximum enhancement factor (EF) can reach 20. In addition, microplastics in ambient atmospheric samples were collected and tested to verify the effectiveness of the AuNPs@V-shaped AAO SERS substrate in the real environment. This study provides a rapid, economic and simple method for detecting and identifying microplastics with small size.     

Mitigating microbiological risks of potential pathogens carrying antibiotic resistance genes and virulence factors in receiving rivers: Benefits of wastewater treatment plant upgrade

● Abundance of MAGs carrying ARG-VF pairs unchanged in rivers after WWTP upgrade. ● Upgrade of WWTPs significantly reduced diversity of pathogenic genera in rivers. ● Upgrade of WWTPs reduced most VF (ARG) types carried by potential pathogens in rivers. ● Upgrade of WWTPs narrowed the pathogenic host ranges of ARGs and VFs in rivers. Wastewater treatment plants (WWTPs) with additional tertiary ultrafiltration membranes and ozonation treatment can improve water quality in receiving rivers. However, the impacts of WWTP upgrade (WWTP-UP) on pathogens carrying antibiotic resistance genes (ARGs) and virulence factors (VFs) in rivers remain poorly understood. In this study, ARGs, VFs, and their pathogenic hosts were investigated in three rivers impacted by large-scale WWTP-UP. A five-year sampling campaign covered the periods before and after WWTP-UP. Results showed that the abundance of total metagenome-assembled genomes (MAGs) containing both ARGs and VFs in receiving rivers did not decrease substantially after WWTP-UP, but the abundance of MAGs belonging to pathogenic genera that contain both ARGs and VFs (abbreviated as PAVs) declined markedly. Genome-resolved metagenomics further revealed that WWTP-UP not only reduced most types of VFs and ARGs in PAVs, but also effectively eliminated efflux pump and nutritional VFs carried by PAVs in receiving rivers. WWTP-UP narrowed the pathogenic host ranges of ARGs and VFs and mitigated the co-occurrence of ARGs and VFs in receiving rivers. These findings underline the importance of WWTP-UP for the alleviation of pathogens containing both ARGs and VFs in receiving rivers.     

Insights into the electron transfer mechanisms of permanganate activation by carbon nanotube membrane for enhanced micropollutants degradation

● A CNT filter enabled effective KMnO₄ activation via facilitated electron transfer. ● Ultra-fast degradation of micropollutants were achieved in KMnO₄/CNT system. ● CNT mediated electron transfer process from electron-rich molecules to KMnO₄. ● Electron transfer dominated organic degradation. Numerous reagents have been proposed as electron sacrificers to induce the decomposition of permanganate (KMnO₄) by producing highly reactive Mn species for micropollutants degradation. However, this strategy can lead to low KMnO₄ utilization efficiency due to limitations associated with poor mass transport and high energy consumption. In the present study, we rationally designed a catalytic carbon nanotube (CNT) membrane for KMnO₄ activation toward enhanced degradation of micropollutants. The proposed flow-through system outperformed conventional batch reactor owing to the improved mass transfer via convection. Under optimal conditionals, a > 70% removal (equivalent to an oxidation flux of 2.43 mmol/(h·m²)) of 80 μmol/L sulfamethoxazole (SMX) solution can be achieved at single-pass mode. The experimental analysis and DFT studies verified that CNT could mediate direct electron transfer from organic molecules to KMnO₄, resulting in a high utilization efficiency of KMnO₄. Furthermore, the KMnO₄/CNT system had outstanding reusability and CNT could maintain a long-lasting reactivity, which served as a green strategy for the remediation of micropollutants in a sustainable manner. This study provides new insights into the electron transfer mechanisms and unveils the advantages of effective KMnO₄ utilization in the KMnO₄/CNT system for environmental remediation.     

Recent advances in electrochemical decontamination of perfluorinated compounds from water: a review

● Recent advances in the electrochemical decontamination of PFAS are reviewed. ● Underlying mechanisms and impacting factors of these processes are discussed. ● Several novel couped systems and electrode materials are emphasized. ● Major knowledge gaps and research prospects on PFAS removal are identified. Per- and polyfluoroalkyl substances (PFAS) pose serious human health and environmental risks due to their persistence and toxicity. Among the available PFAS remediation options, the electrochemical approach is promising with better control. In this review, recent advances in the decontamination of PFAS from water using several state-of-the-art electrochemical strategies, including electro-oxidation, electro-adsorption, and electro-coagulation, were systematically reviewed. We aimed to elucidate their design principles, underlying working mechanisms, and the effects of operation factors (e.g., solution pH, applied voltage, and reactor configuration). The recent developments of innovative electrochemical systems and novel electrode materials were highlighted. In addition, the development of coupled processes that could overcome the shortcomings of low efficiency and high energy consumption of conventional electrochemical systems was also emphasized. This review identified several major knowledge gaps and challenges in the scalability and adaptability of efficient electrochemical systems for PFAS remediation. Materials science and system design developments are forging a path toward sustainable treatment of PFAS-contaminated water through electrochemical technologies.     

Distribution,enrichment mechanism and risk assessment for fluoride in groundwater: a case study of Mihe-Weihe River Basin,China

● High fluorine is mainly HCO₃·Cl-Na and HCO₃-Na type. ● F⁻ decreases with the increase of depth to water table. ● High fluoride is mainly affected by fluorine-containing minerals and weak alkaline. ● Fluorine pollution is mainly in the north near Laizhou Bay (wet season > dry season). ● Groundwater samples have a high F⁻ health risk (children > adults). Due to the unclear distribution characteristics and causes of fluoride in groundwater of Mihe-Weihe River Basin (China), there is a higher risk for the future development and utilization of groundwater. Therefore, based on the systematic sampling and analysis, the distribution features and enrichment mechanism for fluoride in groundwater were studied by the graphic method, hydrogeochemical modeling, the proportionality factor between conventional ions and factor analysis. The results show that the fluorine content in groundwater is generally on the high side, with a large area of medium-fluorine water (0.5–1.0 mg/L), and high-fluorine water is chiefly in the interfluvial lowlands and alluvial-marine plain, which mainly contains HCO₃·Cl-Na- and HCO₃-Na-type water. The vertical zonation characteristics of the fluorine content decrease with increasing depth to the water table. The high flouride groundwater during the wet season is chiefly controlled by the weathering and dissolution of fluorine-containing minerals, as well as the influence of rock weathering, evaporation and concentration. The weak alkaline environment that is rich in sodium and poor in calcium during the dry season is the main reason for the enrichment of fluorine. Finally, an integrated assessment model is established using rough set theory and an improved matter element extension model, and the level of groundwater pollution caused by fluoride in the Mihe-Weihe River Basin during the wet and dry seasons in the Shandong Peninsula is defined to show the necessity for local management measures to reduce the potential risks caused by groundwater quality.     

Evaluation of activated sludge properties’ changes in industrial-wastewater pre-treatment: role of residual aluminum hydrolyzed species with different polymerization degree

● Medium poly Al salts dominated the PAC residual salts with a rational dosage. ● Settlement flocculation effect under medium poly Al salts showed a better trend. ● Complex of medium poly Al salts and enzymes promoted cell activity. ● Medium poly Al salts were beneficial to the effluent indexes. With the widespread introduction of pre-coagulation prior to the biological unit in various industrial wastewater treatments, it is noteworthy that long-term accumulation of residual coagulants has certains effect on both micro and macro characteristics of activated sludge (AS). In this study, the morphology distributions of residual aluminum salts (RAS) and their effects on the removal efficiency of AS were investigated under different PAC concentrations. The results showed that the dominance of medium polymeric RAS, formed under an appropriate PAC dose of 20 mg/L enhanced the hydrophobicity, flocculation, and sedimentation performances of AS, as well as the enzymatic activity in cells in the sludge system, improving the main pollutants removal efficiency of the treatment system. Comparatively the species composition with monomer and dimer / high polymer RAS as the overwhelming parts under an over-dosed PAC concentration of 55 mg/L resulted in excessive secretion of EPS with loose flocs structure and conspicuous inhibition of cellular activity, leading to the deterioration of physico-chemical and biological properties of AS. Based on these findings, this study can shed light on the role of the RAS hydrolyzed species distributions, closely relevant to Al dosage, in affecting the comprehensive properties of AS and provide a theoretical reference for coagulants dosage precise control in the pretreatment of industrial wastewater.     

Revealing the GHG reduction potential of emerging biomass-based CO2 utilization with an iron cycle system

● Greenhouse gas mitigation by biomass-based CO₂ utilization with a Fe cycle system. ● The system including hydrothermal CO₂ reduction with Fe and Fe recovery by biomass. ● The reduction potential quantified by experiments, simulations, and an ex-ante LCA. ● The greatest GHG reduction potential is −34.03 kg CO₂-eq/kg absorbed CO₂. ● Ex-ante LCA supports process optimization to maximize GHG reduction potential. CO₂ utilization becomes a promising solution for reducing anthropogenic greenhouse gas (GHG) emissions. Biomass-based CO₂ utilization (BCU) even has the potential to generate negative emissions, but the corresponding quantitative evaluation is limited. Herein, the biomass-based CO₂ utilization with an iron cycle (BCU-Fe) system, which converts CO₂ into formate by Fe under hydrothermal conditions and recovers Fe with biomass-derived glycerin, was investigated. The GHG reduction potential under various process designs was quantified by a multidisciplinary method, including experiments, simulations, and an ex-ante life-cycle assessment. The results reveal that the BCU-Fe system could bring considerable GHG emission reduction. Significantly, the lowest value is −34.03 kg CO₂-eq/kg absorbed CO₂ (−2.44 kg CO₂-eq/kg circulated Fe) with the optimal yield of formate (66%) and Fe (80%). The proposed ex-ante evaluation approach not only reveals the benefits of mitigating climate change by applying the BCU-Fe system, but also serves as a generic tool to guide the industrialization of emerging carbon-neutral technologies.     

Predicting the elemental compositions of solid waste using ATR-FTIR and machine learning

● A method based on ATR-FTIR and ML was developed to predict CHNS contents in waste. ● Feature selection methods were used to improve models’ prediction accuracy. ● The best model predicted C, H, and N contents with accuracy R ² ≥ 0.93, 0.87, 0.97. ● Some suitable models showed insensitivity to spectral noise. ● Under moisture interference, the models still had good prediction performance. Elemental composition is a key parameter in solid waste treatment and disposal. This study has proposed a method based on infrared spectroscopy and machine learning algorithms that can rapidly predict the elemental composition (C, H, N, S) of solid waste. Both noise and moisture spectral interference that may occur in practical application are investigated. By comparing two feature selection methods and five machine learning algorithms, the most suitable models are selected. Moreover, the impacts of noise and moisture on the models are discussed, with paper, plastic, textiles, wood, and leather as examples of recyclable waste components. The results show that the combination of the feature selection and K-nearest neighbor (KNN) approaches exhibits the best prediction performance and generalization ability. Particularly, the coefficient of determination (R²) of the validation set, cross validation and test set are higher than 0.93, 0.89, and 0.97 for predicting the C, H, and N contents, respectively. Further, KNN is less sensitive to noise. Under moisture interference, the combination of feature selection and support vector regression or partial least-squares regression shows satisfactory results. Therefore, the elemental compositions of solid waste are quickly and accurately predicted under noise and moisture disturbances using infrared spectroscopy and machine learning algorithms.     

Combination of steam-enhanced extraction and electrical resistance heating for efficient remediation of perchloroethylene-contaminated soil: Coupling merits and energy consumption

● Coupling merits of SEE and ERH were explored by a laboratory-scale device. ● SEE promotes the soil electrical conductivity and ERH process. ● Preheating soil by ERH improves the soil permeability and SEE. ● Combined method is more energy-efficient for perchloroethylene extraction. In situ thermal desorption (ISTD) technology effectively remediates soil contaminated by dense nonaqueous phase liquids (DNAPLs). However, more efforts are required to minimize the energy consumption of ISTD technology. This study developed a laboratory-scale experimental device to explore the coupling merits of two traditional desorption technologies: steam-enhanced extraction (SEE) and electrical resistance heating (ERH). The results showed that injecting high-density steam (> 1 g/min) into loam or clay with relatively high moisture content (> 13.3%) could fracture the soil matrix and lead to the occurrence of the preferential flow of steam. For ERH alone, the electrical resistance and soil moisture loss were critical factors influencing heating power. When ERH and SEE were combined, preheating soil by ERH could increase soil permeability, effectively alleviating the problem of preferential flow of SEE. Meanwhile, steam injection heated the soil and provided moisture for maintaining soil electrical conductivity, thereby ensuring power stability in the ERH process. Compared with ERH alone (8 V/cm) and SEE alone (1 g/min steam), the energy consumption of combined method in remediating perchloroethylene-contaminated soil was reduced by 39.3% and 52.9%, respectively. These findings indicate that the combined method is more favorable than ERH or SEE alone for remediating DNAPL-contaminated subsurfaces when considering ISTD technology.     

Stress response to nanoplastics with different charges in Brassica napus L. during seed germination and seedling growth stages

● Higher concentrations of PS, PS-NH₂ and PS-SO₃H inhibited seed germination. ● PS, PS-NH₂ and PS-SO₃H influenced seedling growth in a dose-dependent manner. ● PS, PS-NH₂ and PS-SO₃H reduced essential nutrients uptake and plant quality. ● PS, PS-NH₂ and PS-SO₃H increased antioxidant enzyme activities and MDA content. ● Nanoplastic toxicity was related to surface charges. Nanoplastic pollution has become a significant problem in farmland systems worldwide. However, research on the effects of nanoplastics (NPs) with different charges on field crops is still limited. In our study, NPs with different charges, including unmodified polystyrene nanoplastics (PS), positively charged polystyrene nanoplastics (PS-NH₂), and negatively charged polystyrene nanoplastics (PS-SO₃H), were investigated for their impacts on seed germination and seedling growth of rape. The results showed that seed water uptake (after 12 h), seed germination, seed vigour, and relative root elongation were all significantly reduced under exposure to NPs (200 mg/L). Similarly, remarkable decreases in plant biomass (root weight, shoot weight), growth (root length, plant height), photosynthesis ability (chlorophyll a, chlorophyll b, carotenoids), essential nutrient uptake (Fe, Mn, Zn, Cu), and plant quality (soluble protein, soluble sugar, crude fibre content) of rape seedlings were also observed after exposure to NPs. Among the three kinds of NPs, PS-NH₂ showed stronger effects. Moreover, superoxide dismutase, peroxidase, and catalase activities of rape seedlings were changed, and the content of malondialdehyde was significantly increased under exposure to NPs. Furthermore, positively charged PS-NH₂ showed stronger effects on the phenotype, physiology, biochemistry, nutrient uptake, and plant quality of rape. Notably, a comprehensive toxicity evaluation revealed that PS-NH₂ had the strongest toxicity to rape. The present study provides important implications for the interaction and risk assessment of NPs and crops in soil-plant systems.     

Long-term exposure to air pollution and cerebrovascular disease: findings from Beijing Health Management Cohort study

● This study explored the long-term association by double robust additive models. ● Individual exposure concentrations were assessed by integrating GAM, LUR and BPNN. ● PM_2.5, SO₂ and NO₂ are positively associated with cerebrovascular disease. ● CO could reduce the risk of cerebrovascular disease with the highest robustness. ● The elderly, women and people with normal BMI are at higher risk for air pollution. The relationship between air pollution and cerebrovascular disease has become a popular topic, yet research findings are highly heterogeneous. This study aims to investigate this association based on detailed individual health data and a precise evaluation of their exposure levels. The integrated models of generalized additive model, land use regression model and back propagation neural network were used to evaluate the exposure concentrations. And doubly robust additive model was conducted to explore the association between cerebrovascular disease and air pollution after adjusted for demographic characteristics, physical examination, disease information, geographic and socioeconomic status. A total of 25097 subjects were included in the Beijing Health Management Cohort from 2013 to 2018. With a 1 μg/m³ increase in the concentrations of PM_2.5, SO₂ and NO₂, the incidence risk of cerebrovascular disease increased by 1.02 (95% CI: 1.008–1.034), 1.06 (95% CI: 1.034–1.095) and 1.02 (95% CI: 1.010–1.029) respectively. Whereas CO exposure could decrease the risk, with an odds ratio of 0.38 (95% CI: 0.212–0.626). In the subgroup analysis, individuals under the age of 50 with normal BMI were at higher risk caused by PM_2.5, and SO₂ was considered more hazardous to women. Meanwhile, the protective effect of CO on women and those with normal BMI was stronger. Successful reduction of long-term exposure to PM_2.5, SO₂ and NO₂ would lead to substantial benefits for decrease the risk of cerebrovascular disease especially for the health of the susceptible individuals.     

Same stimuli,different responses: a pilot study assessing air pollution visibility impacts on emotional well-being in a controlled environment

● Emotional responses to visibility-reducing haze was assessed in a controlled lab. ● Valence and arousal have non-linear responses to pollution-caused low visibility. ● Repetitive exposure aggravates negative emotions in severely polluted conditions. ● Emotional bias to pollution relates with gender, decisiveness, attitude to clean air. A growing number of studies have shown that impaired visibility caused by particulate matter pollution influences emotional wellbeing. However, evidence is still scant on how this effect varies across individuals and over repetitive visual exposure in a controlled environment. Herein, we designed a lab-based experiment (41 subjects, 6 blocks) where participants were presented with real-scene images of 12 different PM_2.5 concentrations in each block. Emotional valence (negative to positive) and arousal (calm to excited) were self-rated by participants per image, and the response time for each rating was recorded. We find that as pollution level increases from 10 to 260 µg/m³, valence scores decrease, whereas arousal scores decline first and then bounce back, following a U-shaped trend. When air quality deteriorates, individual variability decreases in hedonic valence but increases in arousal. Over blocks, repetitive visual exposure increases valence at a moderate pollution level but aggravates negative emotions in severely polluted conditions (> 150 µg/m³). Finally, we find females, people who are slow in making responses, and those who are highly aroused by clean air tend to express more negative responses (so-called negativity bias) to ambient pollution than their respective counterparts. These results provide deeper insights into individual-level emotional responses to dirty air in a controlled environment. Although the findings in our pilot study should only be directly applied to the conditions assessed herein, we introduce a framework that can be replicated in different regions to assess the impact of air pollution on local emotional wellbeing.     

Modelling the thresholds of nitrogen/phosphorus concentration and hydraulic retention time for bloom control in reclaimed water landscape

● A new model for bloom control in open land scape water was constructed. ● It considers the effects of temperature and light on algae growth. ● It describes threshold curve of nitrogen, phosp horus and hydraulic retention time. ● Light and temperature dependent growth para meters of typical algae were obtained. The risks posed by algal blooms caused by nitrogen and phosphorus in reclaimed water used in urban water landscapes need to be carefully controlled. In this study, the combined effects of the nitrogen and phosphorus concentrations and the light intensity and temperature on the specific growth rates of algae were determined using Monod, Steele, and Arrhenius models, then an integrated algal growth model was developed. The algae biomass, nitrogen concentration, and phosphorus concentration mass balance equations were used to establish a new control model describing the nitrogen and phosphorus concentration and hydraulic retention time thresholds for algal blooms. The model parameters were determined by fitting the models to data acquired experimentally. Finally, the control model and numerical simulations for six typical algae and mixed algae under standard conditions were used to determine nitrogen/phosphorus concentration and hydraulic retention time thresholds for landscape water to which reclaimed water is supplied (i.e., for a reclaimed water landscape).     

Preliminary techno-economic analysis of three typical decentralized composting technologies treating rural kitchen waste: a case study in China

● Decentralized composting (DC) is a profitable KW treating technology. ● SAC and BEC were economically attractive in rural area, while HDC was unprofitable. ● KW handling subsidy plays a vital role in making DC profitable. ● SAC and BEC have great potential in promoting rural KW treatment. This study was designed to evaluate whether the decentralized rural kitchen waste (KW) composting technologies used in China can be widely applied. To this end, we completed a techno-economic analysis of three typical types of KW compositing, namely solar-assisted (SAC), bio-enhanced (BEC), and heat-dewatering composting (HDC). These evaluations revealed that all three technologies produce composting products that meet China’s organic fertilizer standard and that both SAC and BEC are economically self-sustaining and generate net profits (18824.94 and 17791.52 US$/a) and positive net present values (32133.11 and 25035.93 US$). Subsequent sensitivity analysis demonstrated that the KW-handling subsidy plays a critical role in making decentralized composting economically attractive. Based on these analyses, we believe that reducing the coverage area of SAC, reducing the operating cost of BEC and HDC, upgrading composting products, and strengthening secondary pollution control would aid in supporting the technological improvement of these processes. Moreover, providing appropriate subsidies and promulgating specific standards and policies for KW fertilizer are key strategies for decentralized rural KW composting management.