Electroconductive RGO-MXene membranes with wettability-regulated channels: improved water permeability and electro-enhanced rejection performance

● Electroconductive RGO-MXene membranes were fabricated. ● Wettable membrane channels were established between RGO and MXene nanosheets. ● Hydrophilic MXene reduces the resistance of water entering the membrane channels. ● Water permeance of RGO-MXene membrane is 16.8 times higher than that of RGO membrane. ● Electro-assistance can enhance the dye rejection performance of RGO-MXene membrane. Reduced graphene oxide (RGO) membranes are theoretically more conducive to the rapid transport of water molecules in their channels compared with graphene oxide (GO) membranes, as they have fewer oxygen-containing functional groups and more non-oxidized regions. However, the weak hydrophilicity of RGO membranes inhibits water entry into their channels, resulting in their low water permeability. In this work, we constructed wettable RGO-MXene channels by intercalating hydrophilic MXene nanosheets into the RGO membrane for improving the water permeance. The RGO-MXene composite membrane exhibits high pure water permeance of 62.1 L/(m²·h·bar), approximately 16.8 times that of the RGO membrane (3.7 L/(m²·h·bar)). Wettability test results and molecular dynamics simulations suggest that the improved water permeance results from the enhanced wettability of RGO-MXene membrane and increased rate of water molecules entering the RGO-MXene channels. Benefiting from good conductivity, the RGO-MXene membrane with electro-assistance exhibits significantly increased rejection rates for negatively charged dyes (from 56.0% at 0 V to 91.4% at 2.0 V for Orange G) without decreasing the permeate flux, which could be attributed to enhanced electrostatic repulsion under electro-assistance.     

Tank-dependence of the functionality and network differentiation of activated sludge community in a full-scale anaerobic/anoxic/aerobic municipal sewage treatment plant

● Environmental parameters affected functional bacteria and network associations. ● The structure and interactions of AS networks changed greatly within tanks. ● Anoxic co-occurrence network was more unstable and easily influenced. ● Composition of functional bacteria had a seasonal succession pattern. ● Tetrasphaera was the major PAO in spring and winter leading a better P removal. Understanding the structures and dynamics of bacterial communities in activated sludge (AS) in full-scale wastewater treatment plants (WWTPs) is of both engineering and ecological significance. Previous investigations have mainly focused on the AS communities of WWTP aeration tanks, and the differences and interactions between the communities in anaerobic and anoxic tanks of the AS system remain poorly understood. Here, we investigated the structures of bacterial communities and their inter-connections in three tanks (anaerobic, anoxic, and aerobic) and influent from a full-scale WWTP with conventional anaerobic/anoxic/aerobic (A/A/O) process over a year to explore their functionality and network differentiation. High-throughput sequencing showed that community compositions did not differ appreciably between the different tanks, likely due to the continuous sludge community interchange between tanks. However, network analysis showed significant differences in inter-species relationships, OTU topological roles, and keystone populations in the different AS communities. Moreover, the anoxic network is expected to be more unstable and easily affected by environmental disturbance. Tank-associated environmental factors, including dissolved oxygen, pH, and nutrients, were found to affect the relative abundance of functional genera (i.e., AOB, NOB, PAOs, and denitrifiers), suggesting that these groups were more susceptible to environmental variables than other bacteria. Therefore, this work could assist in improving our understanding of tank-associated microbial ecology, particularly the response of functional bacteria to seasonal variations in WWTPs employing A/A/O process.     

Current status of municipal wastewater treatment plants in North-east China: implications for reforming and upgrading

● The performance and costs of 20 municipal WWTPs were analyzed. ● Effluent COD and NH₄⁺-N effluent exceed the limits more frequently in winter. ● Nitrification and refractory pollutant removal are limited at low temperatures. ● To meet the national standards, electricity cost must increase by > 42% in winter. ● Anammox, granular sludge, and aerobic denitrification are promising technologies. Climate affects the natural landscape, the economic productivity of societies, and the lifestyles of its inhabitants. It also influences municipal wastewater treatment. Biological processes are widely employed in municipal wastewater treatment plants (WWTPs), and the prolonged cold conditions brought by the winter months each year pose obstacles to meeting the national standards in relatively cold regions. Therefore, both a systematic analysis of existing technical bottlenecks as well as promising novel technologies are urgently needed for these cold regions. Taking North-east China as a case, this review studied and analyzed the main challenges affecting 20 municipal WWTPs. Moreover, we outlined the currently employed strategies and research issues pertaining to low temperature conditions. Low temperatures have been found to reduce the metabolism of microbes by 58% or more, thereby leading to chemical oxygen demand (COD) and NH₄⁺-N levels that have frequently exceeded the national standard during the winter months. Furthermore, the extracellular matrix tends to lead to activated sludge bulking issues. Widely employed strategies to combat these issues include increasing the aeration intensity, reflux volume, and flocculant addition; however, these strategies increase electricity consumption by > 42% in the winter months. Internationally, the processes of anaerobic ammonium oxidation (anammox), granular sludge, and aerobic denitrification have become the focus of research for overcoming low temperature. These have inspired us to review and propose directions for the further development of novel technologies suitable for cold regions, thereby overcoming the issues inherent in traditional processes that have failed to meet the presently reformed WWTP requirements.     

Revealing the GHG reduction potential of emerging biomass-based CO2 utilization with an iron cycle system

● Greenhouse gas mitigation by biomass-based CO₂ utilization with a Fe cycle system. ● The system including hydrothermal CO₂ reduction with Fe and Fe recovery by biomass. ● The reduction potential quantified by experiments, simulations, and an ex-ante LCA. ● The greatest GHG reduction potential is −34.03 kg CO₂-eq/kg absorbed CO₂. ● Ex-ante LCA supports process optimization to maximize GHG reduction potential. CO₂ utilization becomes a promising solution for reducing anthropogenic greenhouse gas (GHG) emissions. Biomass-based CO₂ utilization (BCU) even has the potential to generate negative emissions, but the corresponding quantitative evaluation is limited. Herein, the biomass-based CO₂ utilization with an iron cycle (BCU-Fe) system, which converts CO₂ into formate by Fe under hydrothermal conditions and recovers Fe with biomass-derived glycerin, was investigated. The GHG reduction potential under various process designs was quantified by a multidisciplinary method, including experiments, simulations, and an ex-ante life-cycle assessment. The results reveal that the BCU-Fe system could bring considerable GHG emission reduction. Significantly, the lowest value is −34.03 kg CO₂-eq/kg absorbed CO₂ (−2.44 kg CO₂-eq/kg circulated Fe) with the optimal yield of formate (66%) and Fe (80%). The proposed ex-ante evaluation approach not only reveals the benefits of mitigating climate change by applying the BCU-Fe system, but also serves as a generic tool to guide the industrialization of emerging carbon-neutral technologies.     

Photo-induced surface frustrated Lewis pairs for promoted photocatalytic decomposition of perfluorooctanoic acid

● Terminal carboxylate group activation is PFOA degradation’s rate-limiting step. ● Bi₃O(OH)(PO₄)₂ with surface frustrated Lewis pairs (SFLPs) efficiently degrade PFOA. ● Photo-induced Lewis acidic sites and proximal surface hydroxyls constitute SFLPs. ● SFLPs act as collection centers to effectively adsorb PFOA. ● SFLPs endow accessible pathways for photogenerated holes rapid transfer to PFOA. Heterogeneous photocatalysis has gained substantial research interest in treating per- and polyfluoroalkyl substances (PFAS)-contaminated water. However, sluggish degradation kinetics and low defluorination efficiency compromise their practical applications. Here, we report a superior photocatalyst, defected Bi₃O(OH)(PO₄)₂, which could effectively degrade typical PFAS, perfluorooctanoic acid (PFOA), with high defluorination efficiency. The UV light irradiation could in situ generate oxygen vacancies on Bi₃O(OH)(PO₄)₂ through oxidation of the lattice hydroxyls, which further promotes the formation of Lewis acidic coordinately unsaturated bismuth sites. Then, the Lewis acidic sites couple with the proximal surface hydroxyls to constitute the surface frustrated Lewis pairs (SFLPs). With the in-depth spectroscopic analysis, we revealed that the photo-induced SFLPs act as collection centers to effectively adsorb PFOA and endow accessible pathways to transfer photogenerated holes to PFOA rapidly. Consequently, activation of the terminal carboxyl, a rate-limiting step for PFOA decomposition, could be easily achieved over the defected Bi₃O(OH)(PO₄)₂ photocatalyst. These results suggest that SFLPs exhibit great potential in developing highly efficient photocatalysts to degrade persistent organic pollutants.     

V-shaped substrate for surface and volume enhanced Raman spectroscopic analysis of microplastics

● V-shaped substrate was obtained for SERS analysis of microplastics (diameter ≈ 1 μm). ● Enhancement factor of V-shaped substrate can reach 20 in microplastics detection. ● V-shaped nanopore array can bring additional volume enhancement. ● V-shaped substrate was more economic in application compared to Klarite substrate. Research on the microplastics (MPs) is developing towards smaller size, but corresponding methods for the rapid and accurate detection of microplastics, especially nanoplastics still present challenge. In this work, a novel surface and volume enhanced Raman spectroscopy substrate was developed for the rapid detection of microplastic particles below 5 μm. The gold nanoparticles (NPs) were deposited onto the surface and into the V-shaped nanopores of anodized aluminum oxide (AAO) through magnetron sputtering or ion sputtering, and then AuNPs@V-shaped AAO SERS substrate was obtained and studied for microplastic detection. SERS performance of AuNPs@V-shaped AAO SERS substrate was evaluated through the detection of polystyrene and polymethyl methacrylate microspheres. Results indicated that individual polystyrene sphere with a diameter of 1 μm can be well detected on AuNPs@V-shaped AAO SERS substrate, and the maximum enhancement factor (EF) can reach 20. In addition, microplastics in ambient atmospheric samples were collected and tested to verify the effectiveness of the AuNPs@V-shaped AAO SERS substrate in the real environment. This study provides a rapid, economic and simple method for detecting and identifying microplastics with small size.     

Combination of steam-enhanced extraction and electrical resistance heating for efficient remediation of perchloroethylene-contaminated soil: Coupling merits and energy consumption

● Coupling merits of SEE and ERH were explored by a laboratory-scale device. ● SEE promotes the soil electrical conductivity and ERH process. ● Preheating soil by ERH improves the soil permeability and SEE. ● Combined method is more energy-efficient for perchloroethylene extraction. In situ thermal desorption (ISTD) technology effectively remediates soil contaminated by dense nonaqueous phase liquids (DNAPLs). However, more efforts are required to minimize the energy consumption of ISTD technology. This study developed a laboratory-scale experimental device to explore the coupling merits of two traditional desorption technologies: steam-enhanced extraction (SEE) and electrical resistance heating (ERH). The results showed that injecting high-density steam (> 1 g/min) into loam or clay with relatively high moisture content (> 13.3%) could fracture the soil matrix and lead to the occurrence of the preferential flow of steam. For ERH alone, the electrical resistance and soil moisture loss were critical factors influencing heating power. When ERH and SEE were combined, preheating soil by ERH could increase soil permeability, effectively alleviating the problem of preferential flow of SEE. Meanwhile, steam injection heated the soil and provided moisture for maintaining soil electrical conductivity, thereby ensuring power stability in the ERH process. Compared with ERH alone (8 V/cm) and SEE alone (1 g/min steam), the energy consumption of combined method in remediating perchloroethylene-contaminated soil was reduced by 39.3% and 52.9%, respectively. These findings indicate that the combined method is more favorable than ERH or SEE alone for remediating DNAPL-contaminated subsurfaces when considering ISTD technology.     

Impacts of backwashing on micropollutant removal and associated microbial assembly processes in sand filters

● Backwashing in sand filters with 2-h and 4-h EBCTs was simulated. ● Removal efficiency of five micropollutants recovered within 2 d at 2-h EBCT. ● Active biomass of sand filters recovered within 2 d under two EBCTs. ● Microbial composition gradually recovered to pre-backwashing level at 2-h EBCT. ● Recovered microbes only accounted for 15.55 %–25.69 % in the sand filters at 4-h EBCT. Backwashing is crucial for preventing clogging of sand filters. However, few studies have investigated the effect of backwashing on micropollutant removal and the dynamic changes in the microbial community in sand filters. Here, we used a series of manganese and quartz sand filters under empty bed contact times (EBCTs) of 2 h and 4 h to explore variations in micropollutant degradation and temporal dynamics of the microbial community after backwashing. The results showed that the removal efficiencies of caffeine, sulfamethoxazole, sulfadiazine, trimethoprim, atrazine, and active biomass recovered within 2 d after backwashing in both types of sand filters at 2-h EBCT, but the recovery of sulfadiazine and trimethoprim was not observed at 4-h EBCT. Moreover, the removal efficiency of atenolol increased after backwashing in the manganese sand filters, whereas maintained almost complete removal efficiency in the quartz sand filters at both EBCTs. Pearson correlation analysis indicated that microbial community composition gradually recovered to the pre-backwashing level (R increased from 0.53 to 0.97) at 2-h EBCT, but shifted at 4-h EBCT (R < 0.25) after backwashing. Furthermore, the compositions of the recovered, depleted, and improved groups of microbes were distinguished by applying hierarchical clustering to the differentially abundant amplicon sequence variants. The cumulative relative abundance of recovered microbes at 2-h EBCT was 82.76 % ± 0.43 % and 46.82 % ± 4.34 % in the manganese and quartz sand filters, respectively. In contrast, at 4-h EBCT, the recovered microbes dropped to 15.55 %–25.69 % in both types of sand filters.     

Predicting the elemental compositions of solid waste using ATR-FTIR and machine learning

● A method based on ATR-FTIR and ML was developed to predict CHNS contents in waste. ● Feature selection methods were used to improve models’ prediction accuracy. ● The best model predicted C, H, and N contents with accuracy R ² ≥ 0.93, 0.87, 0.97. ● Some suitable models showed insensitivity to spectral noise. ● Under moisture interference, the models still had good prediction performance. Elemental composition is a key parameter in solid waste treatment and disposal. This study has proposed a method based on infrared spectroscopy and machine learning algorithms that can rapidly predict the elemental composition (C, H, N, S) of solid waste. Both noise and moisture spectral interference that may occur in practical application are investigated. By comparing two feature selection methods and five machine learning algorithms, the most suitable models are selected. Moreover, the impacts of noise and moisture on the models are discussed, with paper, plastic, textiles, wood, and leather as examples of recyclable waste components. The results show that the combination of the feature selection and K-nearest neighbor (KNN) approaches exhibits the best prediction performance and generalization ability. Particularly, the coefficient of determination (R²) of the validation set, cross validation and test set are higher than 0.93, 0.89, and 0.97 for predicting the C, H, and N contents, respectively. Further, KNN is less sensitive to noise. Under moisture interference, the combination of feature selection and support vector regression or partial least-squares regression shows satisfactory results. Therefore, the elemental compositions of solid waste are quickly and accurately predicted under noise and moisture disturbances using infrared spectroscopy and machine learning algorithms.     

Modelling the thresholds of nitrogen/phosphorus concentration and hydraulic retention time for bloom control in reclaimed water landscape

● A new model for bloom control in open land scape water was constructed. ● It considers the effects of temperature and light on algae growth. ● It describes threshold curve of nitrogen, phosp horus and hydraulic retention time. ● Light and temperature dependent growth para meters of typical algae were obtained. The risks posed by algal blooms caused by nitrogen and phosphorus in reclaimed water used in urban water landscapes need to be carefully controlled. In this study, the combined effects of the nitrogen and phosphorus concentrations and the light intensity and temperature on the specific growth rates of algae were determined using Monod, Steele, and Arrhenius models, then an integrated algal growth model was developed. The algae biomass, nitrogen concentration, and phosphorus concentration mass balance equations were used to establish a new control model describing the nitrogen and phosphorus concentration and hydraulic retention time thresholds for algal blooms. The model parameters were determined by fitting the models to data acquired experimentally. Finally, the control model and numerical simulations for six typical algae and mixed algae under standard conditions were used to determine nitrogen/phosphorus concentration and hydraulic retention time thresholds for landscape water to which reclaimed water is supplied (i.e., for a reclaimed water landscape).     

Recent advances in electrochemical decontamination of perfluorinated compounds from water: a review

● Recent advances in the electrochemical decontamination of PFAS are reviewed. ● Underlying mechanisms and impacting factors of these processes are discussed. ● Several novel couped systems and electrode materials are emphasized. ● Major knowledge gaps and research prospects on PFAS removal are identified. Per- and polyfluoroalkyl substances (PFAS) pose serious human health and environmental risks due to their persistence and toxicity. Among the available PFAS remediation options, the electrochemical approach is promising with better control. In this review, recent advances in the decontamination of PFAS from water using several state-of-the-art electrochemical strategies, including electro-oxidation, electro-adsorption, and electro-coagulation, were systematically reviewed. We aimed to elucidate their design principles, underlying working mechanisms, and the effects of operation factors (e.g., solution pH, applied voltage, and reactor configuration). The recent developments of innovative electrochemical systems and novel electrode materials were highlighted. In addition, the development of coupled processes that could overcome the shortcomings of low efficiency and high energy consumption of conventional electrochemical systems was also emphasized. This review identified several major knowledge gaps and challenges in the scalability and adaptability of efficient electrochemical systems for PFAS remediation. Materials science and system design developments are forging a path toward sustainable treatment of PFAS-contaminated water through electrochemical technologies.     

Porous silica synthesis out of coal fly ash with no residue generation and complete silicon separation

● Both amorphous and crystalline silicon are completely separated from coal fly ash. ● Porous silica is synthesized out of coal fly ash. ● No residues is produced during the whole synthesis process. ● The one-step method to synthesize silica don’t need long-time reaction and aging. Ordered mesoporous silica materials exhibit enormous potential in industrial production. Since coal fly ash (CFA) is abundant in Si, it has become a green and promising way to utilize CFA by synthesizing porous silica materials. However, the stable crystalline structure of CFA limits the extraction of Si, and the residue is generated during the process of extracting Si. In this work, we proposed a no-residue method to synthesize ordered mesoporous silica out of CFA. Sodium carbonate (Na₂CO₃) was used to reconstruct the crystals of the CFA, and the calcined mixture then directly reacted with the precipitators. This method combined the process of Si extraction and porous material synthesis. In this method, no residue was generated and the silicon in both amorphous and crystalline phases of CFA was fully utilized. By this method, the extraction efficiency of Si was increased from 31.75% to nearly 100%. The as-synthesized mesoporous silica had a highly-ordered pore structure with a space group of la-3d, a surface area of 663.87 m²/g, a pore volume of 0.41 cm³/g, and an average pore diameter of 2.73 nm. The mechanism of crystalline transformation and material structure formation were systematically studied. This method provides a new idea to dispose of CFA and synthesize porous silica materials.     

Effectiveness of tertiary treatment processes in removing different classes of emerging contaminants from domestic wastewater

● Different advanced treatment processes were tested for ECs removal from wastewater. ● UV radiation showed low to moderate removal for 5 of the 38 micropollutants. ● Among tested membrane processes, nanofiltration showed the better performance. ● The use of PAC achieved high or partially removal for 31 out of the 38 compounds. ● The environmental and economical evaluation of a pilot-scale PAC unit is suggested. In this work, 38 different organic emerging contaminants (ECs), belonging to various chemical classes such as pharmaceuticals (PhCs), endocrine-disrupting chemicals (EDCs), benzotriazoles (BTRs), benzothiazoles (BTHs), and perfluorinated compounds (PFCs), were initially identified and quantified in the biologically treated wastewater collected from Athens’ (Greece) Sewage Treatment Plant (STP). Processes already used in existing STPs such as microfiltration (MF), nanofiltration (NF), ultrafiltration (UF), UV radiation, and powdered activated carbon (PAC) were assessed for ECs’ removal, under the conditions that represent their actual application for disinfection or advanced wastewater treatment. The results indicated that MF removed only one out of the 38 ECs and hence it was selected as pretreatment step for the other processes. UV radiation in the studied conditions showed low to moderate removal for 5 out of the 38 ECs. NF showed better results than UF due to the smaller pore sizes of the filtration system. However, this enhancement was observed mainly for 8 compounds originating from the classes of PhCs and PFCs, while the removal of EDCs was not statistically significant. Among the various studied technologies, PAC stands out due to its capability to sufficiently remove most ECs. In particular, removal rates higher than 70% were observed for 9 compounds, 22 were partially removed, while 7 demonstrated low removal rates. Based on our screening experiments, future research should focus on scaling-up PAC in actual conditions, combining PAC with other processes, and conduct a complete economic and environmental assessment of the treatment.     

Mitigating microbiological risks of potential pathogens carrying antibiotic resistance genes and virulence factors in receiving rivers: Benefits of wastewater treatment plant upgrade

● Abundance of MAGs carrying ARG-VF pairs unchanged in rivers after WWTP upgrade. ● Upgrade of WWTPs significantly reduced diversity of pathogenic genera in rivers. ● Upgrade of WWTPs reduced most VF (ARG) types carried by potential pathogens in rivers. ● Upgrade of WWTPs narrowed the pathogenic host ranges of ARGs and VFs in rivers. Wastewater treatment plants (WWTPs) with additional tertiary ultrafiltration membranes and ozonation treatment can improve water quality in receiving rivers. However, the impacts of WWTP upgrade (WWTP-UP) on pathogens carrying antibiotic resistance genes (ARGs) and virulence factors (VFs) in rivers remain poorly understood. In this study, ARGs, VFs, and their pathogenic hosts were investigated in three rivers impacted by large-scale WWTP-UP. A five-year sampling campaign covered the periods before and after WWTP-UP. Results showed that the abundance of total metagenome-assembled genomes (MAGs) containing both ARGs and VFs in receiving rivers did not decrease substantially after WWTP-UP, but the abundance of MAGs belonging to pathogenic genera that contain both ARGs and VFs (abbreviated as PAVs) declined markedly. Genome-resolved metagenomics further revealed that WWTP-UP not only reduced most types of VFs and ARGs in PAVs, but also effectively eliminated efflux pump and nutritional VFs carried by PAVs in receiving rivers. WWTP-UP narrowed the pathogenic host ranges of ARGs and VFs and mitigated the co-occurrence of ARGs and VFs in receiving rivers. These findings underline the importance of WWTP-UP for the alleviation of pathogens containing both ARGs and VFs in receiving rivers.     

Unveiling the interaction mechanisms of key functional microorganisms in the partial denitrification-anammox process induced by COD

● The availability of PD-anammox was investigated with higher NO₃^––N concentration. ● NO₃^––N concentration affects NO₃^––N accumulation during denitrification. ● COD concentration is determinant for N removal pathways in PD-anammox process. ● The synergy/competition mechanisms between denitrifiers and anammox was explored. Partial denitrification-anammox (PD-anammox) is an innovative process to remove nitrate (NO₃^––N) and ammonia (NH₄⁺–N) simultaneously from wastewater. Stable operation of the PD-anammox process relies on the synergy and competition between anammox bacteria and denitrifiers. However, the mechanism of metabolic between the functional bacteria in the PD-anammox system remains unclear, especially in the treatment of high-strength wastewater. The kinetics of nitrite (NO₂^––N) accumulation during denitrification was investigated using the Michaelis-Menten equation, and it was found that low concentrations of NO₃^––N had a more significant effect on the accumulation of NO₂^––N during denitrification. Organic matter was a key factor to regulate the synergy of anammox and denitrification, and altered the nitrogen removal pathways. The competition for NO₂^––N caused by high COD concentration was a crucial factor that affecting the system stability. Illumina sequencing techniques demonstrated that excess organic matter promoted the relative abundance of the Denitratesoma genus and the nitrite reductase gene nirS, causing the denitrifying bacteria Denitratisoma to compete with Cadidatus Kuenenia for NO₂^––N, thereby affecting the stability of the system. Synergistic carbon and nitrogen removal between partial denitrifiers and anammox bacteria can be effectively achieved by controlling the COD and COD/NO₃^––N.     

Effects of iron oxide nanoparticles on phenotype and metabolite changes in hemp clones (Cannabis sativa L.)

● Fe₃O₄ NPs increased the biomass and chlorophyll content of hemp clones. ● Fe₃O₄ NPs penetrated and were internalized by root cells. ● Fe₃O₄ NPs induced the alteration of metabolite profiles in hemp leaves. ● The psychoactive compound THC in hemp leaves was significantly down-regulated. We investigated the effect of iron oxide nanoparticles (Fe₃O₄ NPs, ~17 nm in size) on the phenotype and metabolite changes in hemp (Cannabis sativa L.), an annual crop distributed worldwide. Hemp clones were grown in hydroponic cultures with Fe₃O₄ NPs (50, 100, 200, or 500 mg/L) for four weeks. TEM and ICP-MS were used to determine Fe₃O₄ NPs uptake and translocation. LC-MS-based metabolomics was employed to explore the deep insight into the effect of Fe₃O₄ NPs on hemp plants. The results revealed that plant growth enhanced gradually with increasing concentrations of given NPs up to 200 mg/L, which improved the fresh weight and dry weight by 36.13% and 74.68%, respectively, compared to the control. Even at a high dose (500 mg/L), Fe₃O₄ NPs promoted plant growth, including increased biomass and tissue length. NPs significantly increased the iron and chlorophyll content in plant tissues Increased catalase activity and reduced hydrogen peroxide content in hemp leaves suggested that the Fe₃O₄ NPs activated the defense system. TEM showed that NPs were abundantly attached to the cell wall and dispersed throughout the root cells. Metabolomics revealed that Fe₃O₄ NPs induced metabolic reprogramming in hemp leaves, including the up-regulation of carbohydrates and organic acids, and down-regulation of antioxidants, especially tetrahydrocannabinol (THC). The significantly up-regulated metabolites, including peonidin and 2-hydroxycinnamic acid, could be involved in photosynthesis in hemp plants. These results demonstrate the potential of Fe₃O₄ NPs for promoting hemp growth and decreasing the THC content at low doses.     

Enhancement of extracellular Cr(VI) reduction for anammox recovery using hydrazine: performance,pathways, and mechanism

● N₂H₄ addition enhanced and recovered anammox performance under Cr(VI) stress. ● N₂H₄ accelerated electron transfer of Cr(VI) reduction for detoxification. ● N₂H₄ enhanced anammox metabolism for activity recovery from Cr(VI) inhibition. ● Extracellular Cr(VI) reduction to less toxic Cr(III) was the dominant mechanism. The hexavalent chromium (Cr(VI)) would frequently impose inhibition to anaerobic ammonium oxidation (anammox) process, hindering the efficiency of nitrogen removal in wastewater treatment. Hydrazine (N₂H₄), which is an intermediate product of anammox, participates in intracellular metabolism and extracellular Cr(VI) reduction. However, the roles of N₂H₄-induced intracellular metabolism and extracellular reduction in nitrogen removal under Cr(VI) stress remain unclear. The addition of 3.67 mg/L of N₂H₄ increased the anammox activity by 17%. As an intermediate, N₂H₄ enhanced anammox metabolism by increasing the heme c content and electron transfer system activity. As a reductant, N₂H₄ accelerated the reduction of c-Cyts-mediated extracellular Cr(VI) to the less toxic Cr(III). Extracellular Cr(III) accounts for 74% of the total Cr in a Cr(VI)-stressed anammox consortia. These findings highlight that N₂H₄-induced extracellular Cr(VI) reduction is the dominant mechanism for the survival of anammox consortia. We also found that N₂H₄ increased the production of extracellular polymeric substances to sequester excessive Cr(VI) and produced Cr(III). Taken together, the study findings suggest a potential strategy for enhancing nitrogen removal from ammonium-rich wastewater contaminated with Cr(VI).     

Distribution,enrichment mechanism and risk assessment for fluoride in groundwater: a case study of Mihe-Weihe River Basin,China

● High fluorine is mainly HCO₃·Cl-Na and HCO₃-Na type. ● F⁻ decreases with the increase of depth to water table. ● High fluoride is mainly affected by fluorine-containing minerals and weak alkaline. ● Fluorine pollution is mainly in the north near Laizhou Bay (wet season > dry season). ● Groundwater samples have a high F⁻ health risk (children > adults). Due to the unclear distribution characteristics and causes of fluoride in groundwater of Mihe-Weihe River Basin (China), there is a higher risk for the future development and utilization of groundwater. Therefore, based on the systematic sampling and analysis, the distribution features and enrichment mechanism for fluoride in groundwater were studied by the graphic method, hydrogeochemical modeling, the proportionality factor between conventional ions and factor analysis. The results show that the fluorine content in groundwater is generally on the high side, with a large area of medium-fluorine water (0.5–1.0 mg/L), and high-fluorine water is chiefly in the interfluvial lowlands and alluvial-marine plain, which mainly contains HCO₃·Cl-Na- and HCO₃-Na-type water. The vertical zonation characteristics of the fluorine content decrease with increasing depth to the water table. The high flouride groundwater during the wet season is chiefly controlled by the weathering and dissolution of fluorine-containing minerals, as well as the influence of rock weathering, evaporation and concentration. The weak alkaline environment that is rich in sodium and poor in calcium during the dry season is the main reason for the enrichment of fluorine. Finally, an integrated assessment model is established using rough set theory and an improved matter element extension model, and the level of groundwater pollution caused by fluoride in the Mihe-Weihe River Basin during the wet and dry seasons in the Shandong Peninsula is defined to show the necessity for local management measures to reduce the potential risks caused by groundwater quality.     

Identification of pollution sources in rivers using a hydrodynamic diffusion wave model and improved Bayesian-Markov chain Monte Carlo algorithm

● A hydrodynamic-Bayesian inference model was developed for water pollution tracking. ● Model is not stuck in local optimal solutions for high-dimensional problem. ● Model can estimate source parameters accurately with known river water levels. ● Both sudden spill incident and normal sewage inputs into the river can be tracked. ● Model is superior to the traditional approaches based on the test cases. Water quality restoration in rivers requires identification of the locations and discharges of pollution sources, and a reliable mathematical model to accomplish this identification is essential. In this paper, an innovative framework is presented to inversely estimate pollution sources for both accident preparedness and normal management of the allowable pollutant discharge. The proposed model integrates the concepts of the hydrodynamic diffusion wave equation and an improved Bayesian-Markov chain Monte Carlo method (MCMC). The methodological framework is tested using a designed case of a sudden wastewater spill incident (i.e., source location, flow rate, and starting and ending times of the discharge) and a real case of multiple sewage inputs into a river (i.e., locations and daily flows of sewage sources). The proposed modeling based on the improved Bayesian-MCMC method can effectively solve high-dimensional search and optimization problems according to known river water levels at pre-set monitoring sites. It can adequately provide accurate source estimation parameters using only one simulation through exploration of the full parameter space. In comparison, the inverse models based on the popular random walk Metropolis (RWM) algorithm and microbial genetic algorithm (MGA) do not produce reliable estimates for the two scenarios even after multiple simulation runs, and they fall into locally optimal solutions. Since much more water level data are available than water quality data, the proposed approach also provides a cost-effective solution for identifying pollution sources in rivers with the support of high-frequency water level data, especially for rivers receiving significant sewage discharges.