Effect of complex nitrogen source on the synthesis and accumulation of poly(3-hydroxybutyric acid) by recombinantEscherichia coli in flask and fed-batch cultures

When a recombinantEscherichia coli XL1-Blue harboring pSYL105 was cultured in a complex medium, a poly(3-hydroxybutyric acid) (PHB) concentration of 7.16 g/L was obtained in 48 h. However, a PHB concentration of only 0.91 g/L was obtained in 60 h by culturing in a defined medium. Also, fed-batch culture in a defined medium resulted in considerably lower PHB accumulation than in a complex medium. With the aim to produce a high concentration of PHB at a reduced medium cost, we examined 10 complex nitrogen sources for their ability to promote PHB synthesis in a defined medium. Tryptone, casamino acids, and casein hydrolysate promoted PHB synthesis to a higher extent than the others tested. PHB synthesis was also enhanced during fedbatch cultures when a defined medium was supplemented with various complex nitrogen sources. With tryptone supplementation a PHB concentration of 66.7 g/L could be obtained in 44 h. Yeast extract was less effective for promoting PHB synthesis than tryptone. Corn steep liquor, which did not enhance PHB synthesis significantly, could promote PHB synthesis considerably when supplemented together with yeast extract in both flask and fed-batch cultures.     

Optimization of Microwave-Assisted and Conventional Heating Comparative Synthesis of Poly(lactic acid) by Direct Melt Polycondensation from Agroindustrial Banana (Musa AAA Cavendish) and Pineapple (Ananas comosus) Fermented Wastes

In Costa Rica, a lot of pineapple (Ananas comosus) and banana (Musa AAA) agroindustrial residues are generated each year. These residues can be used to obtain l-lactic acid by fermentation, ultrafiltration and electrodialysis. Poly(l-lactic acid) (PLLA) is a biodegradable and renewable polyester with many industrial and biomedical applications. There is a growing interest to improve the energetic efficiency of the synthesis of PLLA, because the main issue to produce this polymer is the high productive cost compared with petrochemical traditional commodities. In this research, the synthesis of PLLA through two different techniques was compared: microwave-assisted and conventional heating. On microwave synthesis the best results were obtained using lower temperatures and lower reaction times than the conventional heated synthesis. The reaction time was reduced from 15 h by conventional heating to 4.5 h using microwave-assisted synthesis.     

Injectable Methylcellulose and Hyaluronic Acid Hydrogel Containing Silver Nanoparticles for Their Effective Anti-microbial and Wound Healing Activity After Fracture Surgery

Journal of Polymers and the Environment - Currently, the synthesis of silver nanoparticles (AgNPs) was utilized for various life-saving biomedical applications. Herein, we report the synthesis and...     

不饱和季铵盐的合成及其聚合物在化工及环保领域的应用

按不饱和基团的类型对不饱和季铵盐进行了分类,并综述了其合成方法。介绍了其聚合物在含油污水处理、抗菌、纺织品、新材料等领域的应用。阐述了在不饱和季铵盐的开发及其聚合物的应用方面存在的问题。指出了今后的发展方向:应该加大科研投入,加快新型不饱和季铵盐的研发进程,特别是在主结构设计、纯度提高以及新型絮凝剂单体的多样性方面,以制备出多功能性的单体和聚合物。     

工业火炬气NOx排放的模拟实验

为准确核定石化企业火炬气NO_x的排放情况，采用模拟火炬燃烧装置对现场采集的不同种类火炬气进行燃烧，取得了燃烧温度及NO_x排放数据。实验结果表明：火炬气的燃烧温度及燃烧烟气中的NO_x质量浓度与火炬气组分中H₂的体积分数呈正相关；兰炭荒煤气、煤甲醇合成驰放气、合成氨变换气和合成氨合成解析气的燃烧温度分别为410，430，560，650℃。通过计算得到4种火炬气的NO_x排放系数分别为：合成氨合成解析气0.3154~0.5406kg/t，煤甲醇合成驰放气0.1245~0.2263kg/t，合成氨变换气0.0591~0.0813kg/t，兰炭荒煤气0.0801~0.1762kg/t。     

Synthesis and Characterization of Chitosan-Acrylic Acid Based Hydrogels and Investigation the Properties of Bilayered Design with Incorporated Alginate Beads

Journal of Polymers and the Environment - The paper presents the synthesis of hydrogels via free-radical polymerization, based on Chitosan (CS) grafted with Acrylic acid (AA), using a two-step...     

The Preparation and Characterization of Polyurethane Foam with Coconut Oil Polyol and Rapeseed Oil Polyol

Journal of Polymers and the Environment - The bio-based acoustic materials have flourished with the future depletion of petroleum resources in recent years. This paper dedicates on the synthesis of...     

Optimization of Carbon Dioxide and Valeric Acid Utilization for Polyhydroxyalkanoates Synthesis by Cupriavidus necator

The utilization of captured CO₂ as a part of the CO₂ capture and storage system to produce biopolymers could address current environmental issues such as global warming and depletion of resources. In this study, the effect of feeding strategies of CO₂ and valeric acid on cell growth and synthesis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] in Cupriavidus necator was investigated to determine the optimal conditions for microbial growth and biopolymer accumulation. Among the studied CO₂ concentrations (1–20 %), microbial growth and poly(3-hydroxybutyrate) accumulation were optimal at 1 % CO₂ using a gas mixture at H₂:O₂:N₂ = 7:1:91 % (v/v). When valeric acid was fed together with 1 % CO₂, (R)-3-hydroxyvalerate synthesis increased with increasing valeric acid concentration up to 0.1 %, but (R)-3-hydroxybutyrate synthesis was inhibited at >0.05 % valeric acid. Sequential addition of valeric acid (0.05 % at Day 0 followed by 0.025 % at Day 2) showed an increase in 3HV fraction without inhibitory effects on 3HB synthesis during 4 d accumulation period. The resulting P(3HB-co-3HV) with 17–32 mol  % of 3HV is likely to be biocompatible. The optimal concentrations and feeding strategies of CO₂ and valeric acid determined in this study for microbial P(3HB-co-3HV) synthesis can be used to produce biocompatible P(3HB-co-3HV).     

Antibacterial and Catalytic Performance of Green Synthesized Silver Nanoparticles Embedded in Crosslinked PVA Sheet

Journal of Polymers and the Environment - In this research work, a green method of using Saussurea costus extract for the synthesis of silver nanoparticles (AgNPs) is developed. Analysis of the...     

Utilization of amorphous rice husk ash for the synthesis of ZSM-5 zeolite under low temperature

The present study deals with the production and characterization of ZSM-5 zeolite under low temperature using amorphous rice husk ash as an alternative cheap silica source. Rice husk was combusted at various temperatures for the production of amorphous silica. The resulted amorphous silica ash was then utilized without any other treatment as a starting material for the synthesis of ZSM-5 zeolite using low temperature and under atmospheric pressure. For comparison, the high-temperature synthetic approach, the hydrothermal treatment under high temperature and autogenous pressure with the autoclave process, was also applied for the synthesis of ZSM-5 zeolite. The low-temperature method led successfully to the synthesis of highly siliceous zeolite of type ZSM-5. The produced materials were characterized using a variety of analytical techniques, including X-ray diffraction, Fourier transformation infrared spectroscopy, thermogravimetry–differential thermogravimetry analyses, scanning electron microscopy, electron dispersion X-ray analysis and nitrogen porosimetry. The results show that the utilization of an industrial by-product in abundance as a starting material can lead through a simple inexpensive technique to the synthesis of a high value added microporous material with many potential applications.     

淀粉基黄原酸盐合成新工艺及其在废水处理中的应用

研究了淀粉基黄原酸盐的合成新工艺,通过正交试验选定了最佳工艺条件。用该产品进行了电镀废水处理试验,去除重金属效果良好。     

Utilization of waste from the silicon carbide grinding sludge and stone sludge as source of silicon aluminum for the synthesis of the amine functional mesoporous humidity control material

Journal of Material Cycles and Waste Management - This study outlines the synthesis of low-cost mesoporous silica nanomaterials (MSN) from stone sludge (SS) and silicon carbide grinding sludge...     

A New Approach to Chemical Recycling of Polyamide 6.6 and Synthesis of Polyurethanes with Recovered Intermediates

A new efficient method for the chemical decomposition of polyamide 6.6 by the glycolysis and amino-glycolysis processes was proposed. The glycolysis was conducted using the mass excess of ethylene glycol (EG) as a decomposing agent in the presence of a catalyst. Also, a mixture of EG and triethylenetetramine was used as another decomposing agent in the amino-glycolysis process. The described process of decomposition did not require the use of elevated pressure. The hydroxyl and amine numbers, rheology behavior and the presence of characteristic chemical groups in the obtained glycolysates and aminoglycolysates were determined in order to characterize the reaction products. The decomposition products were defined as non-Newtonian fluids that could be described by suitable mathematical models. The conducted studies showed that the properties of the obtained intermediates depend on the mass excess of the decomposing agent used. The resulting semi-products are suitable for reusing in the synthesis of polyurethanes, which has been confirmed by the exemplary synthesis. In the reaction, 10 and 15 wt% of commercial polyol were replaced with the recovered intermediates.     

水滑石类材料的制备及在水污染治理中的应用

简要介绍了目前国内外水滑石类材料的各种制备方法,包括共沉淀法、焙烧还原法、离子交换法等。同时总结了其作为催化剂和离子交换剂在修复阴离子污染水体、印染废水脱色、重金属去除等方面应用。     

Assessment of plasma gasification of high caloric waste streams

Plasma gasification is an innovative technology for transforming high calorific waste streams into a valuable synthesis gas and a vitrified slag by means of a thermal plasma. A test program has been set up to evaluate the feasibility of plasma gasification and the impact of this process on the environment. RDF (refuse derived fuel) from carpet and textile waste was selected as feed material for semi-pilot gasification tests. The aim of the tests was: (1) to evaluate the technical feasibility of making a stable synthesis gas; (2) to characterize the composition of this synthesis gas; (3) to define a suitable after-treatment configuration for purification of the syngas and (4) to characterize the stability of the slag, i.e., its resistance to leaching for use as a secondary building material. The tests illustrate that plasma gasification can result in a suitable syngas quality and a slag, characterized by an acceptable leachability. Based on the test results, a further scale-up of this technology will be prepared and validation tests run.     

Adsorption of Cationic Dye Using A newly Synthesized CaNiFe2O4/Chitosan Magnetic Nanocomposite: Kinetic and Isotherm Studies

Journal of Polymers and the Environment - Chitosan biopolymer was extracted from chitin and utilized for the synthesis of CaNiFe2O4/Chitosan as a new magnetic nanocomposite. The structural and...     

Removal of Organic and Inorganic Pollutants Using CSFe3O4@CeO2 Nanocatalyst via Adsorption–Reduction Catalysis: A Focused Analysis on Methylene Blue

Journal of Polymers and the Environment - The synthesis of an efficient catalytic system with a safe catalysis approach has always been the concern of researchers to eradicate the problems arising...     

从醇后气中回收淡甲醇

在甲醇分离器后设置淡甲醇回收装置回收醇后收醇后的中甲醇，其回收率达到８７．５％，同时大大降低了排放地沟的稀氨水中的甲醇含量，减轻了稀氨水对环境的污染，有较好的经济效益和环境效益。     

Indication of PCDD/F formation through precursor condensation in a full-scale hazardous waste incinerator

This paper gives the PCDD/F fingerprint of boiler and fly ash of a full scale hazardous waste incinerator and demonstrates that, when the waste to be incinerated contains high concentrations of PCBs and chlorinated pesticides, heterogeneous precursor condensation is the dominant PCDD/F formation mechanism rather than de novo synthesis. This is in contrast to full-scale municipal solid waste incinerators, where de novo synthesis has been shown to be the dominant PCDD/F formation mechanism. This paper agrees with earlier predictions based on numerous lab scale experiments.