浙江省危险废物和污泥处置现状及加强全过程监管工作的探讨

随着近几年经济发展水平的提高,浙江省的危险废物和污泥产生量呈不断增长趋势,它们的产生、贮存、转运和处置过程中的监管压力也逐年增大。总结了浙江省的危险废物产生现状,分析了存在的主要问题,对比了发达国家的相关管理经验,提出了进一步完善浙江省危险废物和污泥全过程监管工作的建议。     

中国危险废物管理的历史沿革——从"探索起步"到"全面提升"

如何对危险废物进行有效管理已成为当今世界各国政府环境管理部门共同面临的一个重要问题,也是减少危险废物产生量、降低危险废物危害性的关键.回顾了中国危险废物管理法规、制度和利用处置行业的建立和发展过程,并根据对危险废物的认识过程,将中国危险废物管理分为探索起步阶段、体系构建阶段、能力构筑阶段和全面提升阶段,分析了不同阶段的主要特征和重要事件,阐明了当代危险废物管理模式产生的现实必要性和历史必然性,最后提出了中国建设现代化危险废物管理体系的重要意义.本研究可为我国建立设现代化的危险废物管理体系、提升危险废物监管水平提供参考.     

我国危险废物管理现状及发展趋势

本文介绍了我国危险废物产生量、分布特点、管理现状及发展趋势 ,分析了我国地方及云南省危险废物管理中存在的问题 ,提出了解决问题的对策和建议。     

浙江省小微企业危险废物集中收运体系建设实践与思考

针对民营经济发达、小微企业众多、工业危险废物产生量少但种类多的情况,浙江省在全域"无废城市"建设中,以"政府引导、市场主导"为原则,建立了覆盖全省的小微企业危险废物集中收运体系,以破解小微企业危险废物处置出路难的问题.概述了浙江省小微企业危险废物产生及收运现状,并依据集中收运体系的准入条件和建设要求,梳理了全省小微企业...     

我国危险废物管理现状及发展趋势

本文介绍了我国危险废物产生量、分布特点、管理现状及发展趋势，分析了我国地方及云南省危险废物管理中存在问题，提出了解决问题的对策和建议。     

宁波市危险废物管理、处置现状和对策

对宁波市危险废物现状进行了调查,分析了危险废物的来源、产量、特征及存在的主要问题.在此基础上,提出了宁波市危险废物管理处置对策,具体包括:加强危险废物申报登记工作;健全宁波市危险废物管理法律体系和监督管理机构;建立合理的危险废物收费制度;源头控制危险废物污染和建设危险废物集中处置场等.     

浅谈基层环保部门危险废物管理中的问题及对策

分析了国内现行的危险废物管理制度、标准及规范,结合基层管理的实践,指出了当前危险废物管理中存在的问题,提出了解决问题的对策和途径,并就危险废物实行行政代处置进行了探索和尝试。     

水泥窑协同处置危险废物的研究现状及其发展

水泥窑协同处置危险废物作为一种新兴的危险废物焚烧处置技术,具有焚烧温度高、停留时间长、处理效果好、改造成本低等多项优势,应用前景广泛。简述了中国危险废物的产生及处理处置现状,介绍了水泥窑协同处置技术,综合国内外最新的水泥窑协同处置危险废物的文献,从熟料性质、水泥质量以及烟气排放等角度综述了垃圾焚烧飞灰、污染土壤、农药废物以及污泥类危险废物这4种典型危险废物在水泥窑中的协同处置情况,分析了每种危险废物在水泥窑中协同处置的可行性,提出了实际应用过程中应该注意的问题,最后提出了未来水泥窑协同处置危险废物的研究思路。     

危险废物稳定化/固化技术的现状与发展

本文对危险废物稳定化／固化处理技术的历史、现状以及今后的发展方向进行了较为系统的论述，对该技术在处理危险废物时所存在的问题进行了探讨，认为今后药剂稳定化技术在废物处置预处理领域将会占据重要的地位。     

危险废物豁免(排除)的管理体系研究

危险废物豁免(排除)是指按照一定的程序和豁免原则将一部分产生量小、分散、危害性低的危险废物从现有的危险废物管理体系中豁免或排除出来.系统分析了国外危险废物豁免(排除)管理体系研究现状和发展趋势,结合中国国情提出建立中国危险废物豁免(排除)管理体系的理论、方法、程序及相关原则,对尽快建立中国危险废物管理体系具有一定的借鉴意义.     

连云港经济技术开发区危废处置情况的调查研究

通过对连云港市经济技术开发区内医药企业危废产生及库存等情况进行调查,针对目前危废处理处置过程中存在问题,提出解决对策及建议。     

Hazardous wastes and economic risk reduction: case study, Poland

A concise summary balance of industrial and hazardous waste is given, reflecting the situation in Poland. Nearly 130 million tonnes of waste were generated annually in the past in more than 1300 larger industrial plants. Approximately 1800 million tonnes of industrial waste is already stockpiled. The amount of hazardous waste generated per year was 0.3 and 1.0 million tonnes of the first and second class of toxicity, respectively. Seventeen existing on-site incinerators cannot treat the whole amount of solid and hazardous waste generated. Therefore, landfilling is still the most widely used method of waste disposal. Decontamination of the abandoned areas left by the Soviet Army, and reclamation of some hundreds of storage sites filled with outdated pesticides are now added to the national plan of waste management. Its implementation, including introduction of the best available and best managed technologies of hazardous waste treatment and disposal, will take at least 20 to 30 years.     

Hazardous waste disposal in Germany: a case study of the site in Billigheim, Baden-Wurttemberg

The disposal of hazardous waste is a very critical issue. It is associated with many risks. Efforts are made to minimise these by consistent legislation and by proper treatment of the waste. The goal of a hazardous waste disposal site, as described in this paper, is to ensure that hazardous waste is treated and disposed of in a way that does not harm human beings or the environment. To assure this it is necessary to observe the handling of the hazardous waste from its producer up to the disposal site, and to identify possible inherent risks.     

Public Policy impacts on the Generation and Disposal of Hazardous Waste in New York State

A number of policies adopted by the federal government and the states have been designed to promote waste reduction or influence the choice of waste disposal technologies employed by generators of hazardous waste. Graphic analysis of smoothed time series data for hazardous wastes manifested in New York State for the period between June 1982 and February 1987 suggests that some of these policies have had the intended effects.

Significant shifts in manifested waste volumes are evident that coincide with the following policy interventions: (1) increased state waste-end tax rates; (2) state and federal landfill bans; (3) federal restrictions on burning hazardous wastes and waste oils for energy recovery; and (4) changes in the federal regulatory definition of hazardous waste. Other changes in waste generation and management appear to be attributable to such factors as state and regional economic conditions and changes in instate treatment and disposal facility capacity. Analysis of the management of specific waste types supports evidence from the graphic analysis that waste generators changed from land disposal to “higher” waste handling technologies in response to several policy interventions.     

Public policy impacts on the generation and disposal of hazardous waste in New York State

A number of policies adopted by the federal government and the state have been designed to promote waste reduction or influence the choice of waste disposal technologies employed by generators of hazardous waste. Graphic analysis of smoothed time series data for hazardous wastes manifested in New York State for the period between June 1982 and February 1987 suggests that some of these policies have had the intended effects. Significant shifts in manifested waste volumes are evident that coincide with the following policy interventions: (1) increased state waste-end tax rates; (2) state and federal landfill bans; (3) federal restrictions on burning hazardous wastes and waste oils for energy recovery; and (4) changes in the federal regulatory definition of hazardous waste. Other changes in waste generation and management appear to be attributable to such factors as state and regional economic conditions and changes in instate treatment and disposal facility capacity. Analysis of the management of specific waste types supports evidence from the graphic analysis that waste generators changed from land disposal to "higher" waste handling technologies in response to several policy interventions.     

Avoiding Land Disposal of Hazardous Waste

In response to a growing societal mandate, land disposal of hazardous wastes is gradually being replaced by treatment technologies. This shift to "alternative technologies" is the result of the impacts of past land disposal practices on other environmental media (groundwater, surface water, and air). A prime motivation for adopting alternatives to land disposal is to eliminate these cross-media impacts. Alternative technologies, however, can themselves have cross-media environmental impacts which must be recognized and addressed before such technologies are extensively applied. This paper discusses hazardous waste constituents, common disposal practices, alternative technologies currently being applied, possible cross-media environmental impacts of the alternative technologies, and proposed methods of mitigating these environmental impacts. Case studies from uncontrolled hazardous waste sites and industrial operations are used to illustrate the application of alternative technologies. Case studies include the application of waste treatment technologies as well as the adoption of waste minimization techniques.     

危险废物回转式流化冷渣多段焚烧系统焚烧特性研究

危险废物的处理和处置是摆在我国各级市政府面前的紧迫任务。然而我国已经运行的危险废物焚烧装置普遍存在回转窑挂壁结渣、热灼减率偏高和污染排放超标等问题,作者通过将回转窑和流化床特点相结合的方法提出了一种新型危险废物回转式流化冷渣多段焚烧处置装置。该装置采用回转窑(一燃室)、二燃室和流化床结合的热解-流化焚烧工艺,特别是采用控制窑头温度避免了回转窑挂壁结渣;采用流化冷渣装置延长未燃烬渣的焚烧时间,解决了热灼减率偏高问题;水冷式烟气急冷装置可以将烟气温度从1 100℃降到200℃,防止了二恶英的尾部低温再生成。该系统运行稳定可靠,可以处理医疗垃圾和大多数的固态和液态危险废物,实现了烟气污染物尤其是二恶英排放达到国家标准的目标。同时对该系统运行时窑头温度分布、二燃室炉膛出口氧量变化、回转窑和炉膛升温特性、燃烧室外壁温度分布等几方面运行数据都进行了详细的介绍,为危险废物焚烧炉的运行提供了宝贵的经验数据。     

Designing a low-cost pollution prevention plan to pay off at the University of Houston

The University of Houston is located just south of downtown Houston, TX. Many different chemical substances are used in scientific research and teaching activities throughout the campus. These activities generate a significant amount of waste materials that must be discarded as regulated hazardous waste per U.S. Environmental Protection Agency (EPA) rules. The Texas Commission on Environmental Quality (TCEQ) is the state regulatory agency that has enforcement authority for EPA hazardous waste rules in Texas. Currently, the University is classified as a large quantity generator and generates >1000 kg per month of hazardous waste. In addition, the University has experienced a major surge in research activities during the past several years, and overall the quantity of the hazardous waste generated has increased. The TCEQ requires large quantity generators to prepare a 5-yr Pollution Prevention (P2) Plan, which describes efforts to eliminate or minimize the amount of hazardous waste generated. This paper addresses the design and development of a low-cost P2 plan with minimal implementation obstacles and strong payoff potentials for the University. The projects identified can be implemented with existing University staff resources. This benefits the University by enhancing its environmental compliance efforts, and the disposal cost savings can be used for other purposes. Other educational institutions may benefit by undertaking a similar process.     

Incineration of hazardous wastes from the petroleum industry in Nigeria

Persistent hazardous wastes are produced in the recovery, processing and upgrading of crude petroleum in Nigeria. However, recent developments in environmental pollution control are drawing increasing attention to the problems of hazardous wastes. The ever-increasing need to control these wastes from the petroleum industry often compels the chemical engineer to specify methods of treatment and disposal. Present methods for disposal are becoming increasingly undesirable for a number of reasons, and incineration is being considered as an alternative. This paper reviews the extent of hazardous waste generation from the Nigerian petroleum industry and its environmental implications. It also examines the current disposal methods and the incineration technology option. The major chemical engineering concepts of the incineration process and the principles guiding their operations are discussed. The potential for the use of incineration is examined, as well as information that would aid the choice of incineration system for new applications.