A comparative study on per capita waste generation according to a waste collecting system in Korea

As cities are becoming increasingly aware of problems related to conventional mobile collection systems, automated pipeline-based vacuum collection (AVAC) systems have been introduced in some densely populated urban areas. The reasons are that in addition to cost savings, AVAC systems can be efficient, hygienic, and environmentally friendly. Despite difficulties in making direct comparisons of municipal waste between a conventional mobile collection system and an AVAC system, it is meaningful to measure the quantities in each of these collection methods either in total or on a per capita generation of waste (PCGW, g/(day*capita)) basis. Thus, the aim of this study was to assess the difference in per capita generation of household waste according to the different waste collection methods in Korea. Observations on household waste show that there were considerable differences according to waste collection methods. The value of per capita generation of food waste (PCGF) indicates that a person in a city using AVAC produces 60 % of PCGF (109.58 g/(day*capita)), on average, compared with that of a truck system (173.10 g/(day*capita)) as well as 23 %p less moisture component than that with trucks. The value of per capita generation of general waste (PCGG) in a city with an AVAC system showed 147.73 g/(day*capita), which is 20 % less than that with trucks delivered (185 g/(day*capita)). However, general waste sampled from AVAC showed a 35 %p increased moisture content versus truck delivery.     

Passengers waste production during flights

We assume that during flights the amount of waste that is produced is limited. However, daily, approximately 8000 commercial airplanes fly above Europe’s airspace while at the same time, more than 17,000 commercial flights exist in the entire world. Using primary data from airlines, which use the Larnaca’s International Airport (LIA) in Cyprus, we have tried to understand why wastes are produced during a typical flight such as food waste, paper, and plastics, as well as how passengers affect the production of those wastes. The compositional analysis took place on 27 flights of 4 different airlines which used LIA as final destination. The evaluation indicated that the passenger’s habits and ethics, and the policy of each airline produced different kinds of waste during the flights and especially food waste (FW). Furthermore, it was observed that the only waste management strategy that exists in place in the airport is the collection and the transportation of all those wastes from aircrafts and from the airport in the central unit for further treatment. Hence, this research indicated extremely difficulties to implement any specific waste minimization, or prevention practice or other sorting methods during the flights due to the limited time of the most flights (less than 3 h), the limited available space within the aircrafts, and the strictly safety roles that exist during the flights.     

Solid waste forecasting using modified ANFIS modeling

Solid waste prediction is crucial for sustainable solid waste management. Usually, accurate waste generation record is challenge in developing countries which complicates the modelling process. Solid waste generation is related to demographic, economic, and social factors. However, these factors are highly varied due to population and economy growths. The objective of this research is to determine the most influencing demographic and economic factors that affect solid waste generation using systematic approach, and then develop a model to forecast solid waste generation using a modified Adaptive Neural Inference System (MANFIS). The model evaluation was performed using Root Mean Square Error (RMSE), Mean Absolute Error (MAE) and the coefficient of determination (R2). The results show that the best input variables are people age groups 0-14, 15-64, and people above 65 years, and the best model structure is 3 triangular fuzzy membership functions and 27 fuzzy rules. The model has been validated using testing data and the resulted training RMSE, MAE and R2 were 0.2678, 0.045 and 0.99, respectively, while for testing phase RMSE =3.986, MAE = 0.673 and R2 = 0.98.

Implications: To date, a few attempts have been made to predict the annual solid waste generation in developing countries. This paper presents modeling of annual solid waste generation using Modified ANFIS, it is a systematic approach to search for the most influencing factors and then modify the ANFIS structure to simplify the model. The proposed method can be used to forecast the waste generation in such developing countries where accurate reliable data is not always available. Moreover, annual solid waste prediction is essential for sustainable planning.     

餐厨垃圾高温厌氧消化

在中试规模下,研究餐厨垃圾高温厌氧消化试验,通过监测餐厨垃圾厌氧消化过程中产气量、气体组成等产气情况和消化液中pH值、SCOD、NH4+-N、VFAs等化学指标含量变化,确定餐厨垃圾厌氧消化的最大有机负荷,并分析餐厨垃圾高温厌氧消化技术的可行性,结果表明,在工程上餐厨垃圾单独进行高温厌氧消化产甲烷具有技术可行性,但难以保证系统长时间安全稳定运行;餐厨垃圾厌氧消化正常运行时最大有机负荷可达2.551 kg VS/(m3.d);当系统有机负荷为2.551 kg VS/(m3.d)时,每天每千克VS最高可产生甲烷量0.622 m3;氨氮对餐厨垃圾厌氧消化产甲烷影响明显;餐厨垃圾中固有Na+含量对厌氧消化产甲烷影响不明显。     

固体废物相关概念的基本特点

固体废物法对废物的一些概念进行了定义,在固体废物环境管理当中,对这些概念缺乏深入认识,导致在实际管理中对固体废物和危险废物的调查、认定、统计、管理、预测、设施建设等一系列与废物相关的行动出现偏差甚至不准确。对固体废物、危险废物以及废物利用、处置、贮存、排放等概念包含的内容进行了研究,提出了一些新的认识观点。     

Effects of colliery waste on littoral communities in north-east England

Colliery waste input has a detrimental effect on the species richness and alpha diversity of sandy and rocky shore communities in north-east England. On sandy shores at the shore levels Chart Datum (CD) + 1.2 to 1.5 m (low shore) and CD + 2.7 to 3.0 m (mid-shore), a maximum of two species of macroinvertebrates per shore level was found at sites heavily contaminated by colliery waste input. In contrast, typically about eight species were found at uncontaminated shores. At the shore level CD + 4.2 to 4.5 m (high shore), the species richness and diversity of fauna were not detectably affected by colliery waste input. On rocky shores that were uncontaminated, 12-15 species of macroalgae were found, whereas only five to eight species were found at contaminated shores. The absentees were usually ephemeral, early successional species. Macroalgal biomass, although less at contaminated shores, showed no significant relationship with colliery waste input. However, the alpha diversity of animal communities on rocky shores was, on occasions, significantly increased where colliery waste inputs occurred. The physical properties of colliery waste are likely to be the reason for the effects observed on both sandy and rocky shores, since many of the leachable chemicals in colliery waste are leached during the period that it spends on the sea bed before accumulating in the intertidal zone.     

Control of incidental asbestos exposure at hazardous waste sites

This paper discusses asbestos regulations that are not part of Superfund and examines how these regulations can help to identify, evaluate and manage the risk associated with Asbestos Containing Material (ACM) at hazardous waste cleanup sites. Unless one knows where to look for ACM at hazardous waste sites, it may go undetected even after all the traditional sampling is done. Although EPA is currently developing a policy for evaluating risk from asbestos exposure at certain Superfund sites, information from existing regulations can be used to manage hazards associated with asbestos exposure at hazardous waste sites. This paper also identifies where to find governmental agency personnel and consultants who may be retained for site-specific help.     

家禽养殖场废弃物处理技术的研究进展

家禽养殖场的废弃物长期以来对环境构成了极大的污染并威胁着畜禽和人类的健康 ,因而对家禽废弃物进行资源化处理势在必行。综述了近 10年来的 3种主要的可供选择的家禽垃圾处理的技术路线的研究进展。介绍了最优化堆肥、厌氧发酵和直接焚烧的试验研究结果     

洗像废液的分质处理

对洗像过程中产生的洗像废液按照成分的不同进行分质处理。其中 ,有机废液采用高温焚烧的方法进行处理 ;无机废液根据主要成分的化学性质分别采用中和、氧化等方法进行处理。通过室内试验 ,确定了处理工艺的主要参数 ,并根据试验结果 ,利用废液处理站设施处理了 1.6 4t洗像废液。处理后排放的废水、废气均达到了国家有关排放标准     

Perfluorooctane surfactants in waste waters, the major source of river pollution

Perfluorooctanoate (PFOA) and perfluorooctane sulfonate (PFOS) are persistent and widely distributed in the environment. Recently, the discharge of municipal waste water has been shown to be an important route of such perfluoroalkyl surfactants into the aquatic environment. The aim of this study was to assess the mass flow of PFOA and PFOS from typical waste water treatment plants (WWTPs) into surface waters. Samples were collected at different stages of treatment of four WWTPs in Northern Bavaria, Germany, and from the rivers receiving the treated waste waters (WW). The outflow of PFOA from the WWTPs to the rivers was 20-fold higher than the inflow to the plants; about a tenth was removed with the sludge. For PFOS, the increase from inlet to outlet was about 3-fold; almost half of it was retained in the sludge. Both surfactants were released into river water from the WWTP of a medium-sized city with domestic, industrial and commercial waste waters; in domestic waste waters the surfactants were found at much lower levels.     

Biomethanation of tobacco waste

Tobacco is an important cash crop produced in considerable quantities in India. During cigarette manufacturing large quantities of tobacco waste are produced annually and its disposal is a serious ecological problem. In the present study a process for the biodegradation of tobacco waste, under methanogenic conditions, was developed so that environmental pollution can be reduced while producing biogas as a useful energy source. The methanogenic bacterial consortium developed for the anaerobic degradation of tobacco waste without any chemical pretreatment in a single stage digester at 15 days HRT (hydraulic retention time) has been successfully scaled-up to install a 10 m(3) biogas plant. The gas yields (1 kg(-1 TS fed) day(-1)) varied from 169 to 282 depending on the ambient temperatures. The methane content in the biogas produced was 60%. The pH and VFA content of the digested slurry were 6.8 +/- 0.1 and 599 mg litre(-1), respectively. Nicotine, COD and BOD reductions were 75, 60 and 80%, respectively.     

Characteristics and management of domestic waste in a rural area of the Tibetan Plateau

In the rural area of the Tibetan Plateau (RATP), the characteristics of domestic waste, people’s environmental awareness, people’s willingness to pay and their influence factors were firstly studied by questionnaires, field samplings and laboratory tests. The results showed that, in the RATP, the generation of domestic waste was 85 g?d-1 per capita and it was mainly composed of plastics, inert waste, kitchen waste, glass and paper. The waste bulk density, moisture content, ash, combustible and low calorific value were 65 kg?m-3, 19.25%, 44.90%, 35.85% and 10,520 kJ?kg-1 respectively. These characteristics are influenced by income sources and geographical position to some extent. Classified collection should be promoted widely on the household and the village basis. Compost, fermentation, landfill, bioreactor landfill and semi-aerobic landfill have been approved as effective techniques to treat domestic waste, except incineration. The distance of 50–800 m between each collection facility and the disposal fee of around $0.8 per month per household are suggested. For suburbs or large population villages, it’s better to treat domestic waste by the centralized way. But for the remote rural areas, a decentralized way is proposed. Significantly, the educational and economic influence should be considered into an effective domestic waste management program.

Implications:?The current situatio n of the environment in the rural areas of the Tibetan Plateau (RATP) was surveyed. There, the generation of organics and moisture of domestic waste were low but ash, recyclables, and combustibles were high. People’s knowledge of domestic waste was absent but their participation in management was strong. Based on the current situation, compost, fermentation, and landfill were effective but incineration was inappropriate. Also, a localized mini landfill for a cluster of villages and or settlements was the best method there.     

疫情下医疗废物的处置现状分析

2019年新冠疫情席卷全球,在疫情环境下,医疗废物大幅增多,全国各大城市纷纷出现医疗废物处置不当的现象。本文对国内外现状分析,在认知、设施、管理和监督四个方面发现存在一定的问题,通过加强教育、加大储备、完善机制和改善监管的建议,为提升医疗废物应急处置能力提供参考。     

An analysis of biomedical waste incineration.

The California Air Resources Board (ARB) completed a series of source tests of eight operating biomedical waste incinerators (BMWI) under conditions of typical operation. The emissions of certain metals, and chlorinated dioxins and furans in the flue gases of BMWI are relatively high in comparison to emissions from other combustion sources, such as hazardous waste or municipal waste incinerators of modern design. This study reports on an analysis of the status of the existing regulatory framework and the California data base. Clarification of definitional issues at the federal level is needed to effectively treat BMWI management issues. Although few relationships among combustion parameters and emissions were uncovered, patterns of emissions were evident, suggesting commonality and relationships among the waste stream constituents and emissions. Potential implications for future research, operation of BMWI, controls and source reduction and waste segregation strategies are also discussed.     

Economic evaluation of a landfill system with gas recovery for municipal solid waste management: a case study

Economic activity uses resources, which leads to waste generation. With rapid industrialisation and urbanisation, per capita solid waste generation has increased considerably. Solid waste generation data for last two decades shows an alarming increase. Owing to its improper and untimely collection, the transport and disposal of municipal solid waste poses a severe threat to various components of the environment and also to public health. This paper describes the merits and demerits of various technological aspects of solid waste management. Landfill technology, as it is the most widely employed and is regarded as the most suitable and simple mechanism, especially for tropical countries such as India, is emphasised. All possible costs and benefits and externalities are examined. A cost-benefit analysis of a landfill system with gas recovery (LFSGR) has been carried out for Mumbai city's solid waste, accounting for certain external costs and benefits, and found that it could make a huge difference of savings of about Rs. 6.366 billion (approx. $0.l40 billion) per annum with reference to the existing system of waste disposal.     

An implementation framework of blockchain-based hazardous waste transfer management system

Environmental Science and Pollution Research - The rapid increase in volume and types of hazardous waste (HW) due to China’s continuous economic growth makes it significant to conduct HW...     

Synthetic fuel for imitation of municipal solid waste in experimental studies of waste incineration

Synthetic fuel is prepared to imitate municipal solid waste (MSW) in experimental studies of incineration processes. The fuel is composed based on the Environmental Protection Agency reports on the materials contained in MSW. Uniform synthetic fuel pellets are prepared using available and inexpensive components including newsprint, hardwood mulch, low density polyethylene, iron, animal feed, sand, and water to imitate paperbound, wood, yard trimming, plastic, metal, food wastes, and other materials in MSW. The synthetic fuel preparation procedure enables one to reproduce and modify the fuel for a wide range of experiments in which the mechanisms of waste incineration are addressed. The fuel is characterized using standard ASTM tests and it is shown that its parameters, such as combustion enthalpy, density, as well as moisture, ash and fixed carbon contents are adequate for the representation of municipal solid waste. In addition, chlorine, nitrogen, and sulfur contents of the fuel are shown to be similar to those of MSW. Experiments are conducted in which the synthetic fuel is used for operation of a pilot-scale incinerator research facility. Steady-state temperature operation regimes are achieved and reproduced in these experiments. Thermodynamic equilibrium flame conditions are computed using an isentropic one-dimensional equilibrium code for a wide range of fuel/air ratios. The molecular species used to represent the fuel composition included cellulose, water, iron, polyethylene, methanamine, and silica. The predicted concentrations of carbon monoxide, nitric oxides, and oxygen in the combustion products are compared with the respective experimental concentrations in the pilot-scale incinerator exhaust.     

Characterization of municipal waste in Kampala,Uganda

In Kampala, Uganda, about 28,000 tons of waste is collected and delivered to a landfill every month. Kampala Capital City Authority (KCCA) records show that this represents approximately 40% of the waste generated in the city. The remaining uncollected waste is normally dumped in unauthorized sites, causing health and environmental problems. However, the organic fraction of domestic waste can provide an opportunity to improve livelihoods and incomes through fertilizer and energy production. This study characterized the municipal waste generated in Kampala and delivered to Kiteezi landfill between July 2011 and June 2012, that is, covering the dry and wet months. On each sampling day, waste was randomly selected from five trucks, sorted and weighed into different physical fractions. Samples of the organic waste from each truck were analyzed for total solids, major nutrients, and energy content. During the wet months, the waste consisted of 88.5% organics, 3.8% soft plastics, 2.8% hard plastics, 2.2% paper, 0.9% glass, 0.7% textiles and leather, 0.2% metals, and 1.0% others. During the dry months, the waste consisted of 94.8% organics, 2.4% soft plastics, 1.0% hard plastics, 0.7% papers, 0.3% glass, 0.3% textile and leather, 0.1% metals, and 0.3% others. The organic waste on average had a moisture content of 71.1% and contained 1.89% nitrogen, 0.27% phosphorus, and 1.95% potassium. The waste had an average gross energy content of 17.3 MJ/kg. It was concluded that the organic waste generated can be a suitable source of some plant nutrients that are useful especially in urban agriculture.

Implications:?The result of the waste characterization in Kampala was found to be significantly different from that obtained for other Sub-Saharan African (SSA) cities, showing that studies assuming average values for the waste fractions are likely to result in erroneous results. Furthermore, no reduction in organic fraction of the waste was noticed when compared with a study done two decades ago in spite of greatly improved economic status of Kampala city, a finding that is not in agreement with several other similar studies done for other SSA cities.     

Slurry-phase biodegradation of weathered oily sludge waste

We assessed the biodegradation of a typical oily sludge waste (PB401) in Mexico using several regimes of indigenous microbial consortium and relevant bioremediation strategies in slurry-phase system. Abiotic loss of total petroleum hydrocarbons (TPH) in the PB401 was insignificant, and degradation rates under the various treatment conditions ranged between 666.9 and 2168.7 mg kg(-1) day(-1) over a 15 days reaction period, while viable cell count peaked at between log(10)5.7 and log(10)7.4 cfu g(-1). Biostimulation with a commercial fertilizer resulted in 24% biodegradation of the TPH in the oily waste and a corresponding peak cell density of log(10)7.4 cfu g(-1). Addition of non-indigenous adapted consortium did not appear to enhance the removal of TPH from the oily waste. It would appear that the complexities of the components of the alkylaromatic fraction of the waste limited biodegradation rate even in a slurry system.     

Antimony in municipal waste.

Antimony content in municipal waste was studied. Sampled municipal waste was dried, crushed and analyzed. Antimony determinations were performed by Kjeldahl decomposition--batch hydride generation spectrometry and neutron activation analysis. Overall content of antimony in waste was 40-50 g/t raw waste. It was estimated than 20% of the annual production of antimony was discarded as municipal waste in Japan. Leaching of antimony from antimony-added materials may occur, because "small tips" involved considerable amounts of antimony.