Worker safety and injury severity analysis of earthmoving equipment accidents

Introduction: Research on construction worker safety associated with construction equipment has mostly focused on accident type rather than injury severity and the embedded factor relationships. Significant variables and their effects on the degree of injury are examined for earthmoving equipment using data from OSHA. Four types of equipment, backhoe, bulldozer, excavator, and scraper are included in the study. Accidents involving on-foot workers and equipment operators are investigated collectively, as well as separately. Methods: Cross tabulation analysis was conducted to establish the associations between selected categorical variables, using degree of injury as a dichotomous dependent variable (fatal vs. nonfatal) and a number of independent variables having different values. Odds ratios were calculated to determine how much a certain variable/factor increases the odds of fatality in an accident, and the odds ratios were ranked to determine the relative impact of a given factor. Results: It was found that twelve variables were significantly associated with injury severity. Rankings based on odds ratios showed that inadequate safety training (2.54), missing equipment protective system (2.38), being a non-union worker (2.26), being an equipment operator (1.93), and being on or around inadequately maintained equipment (1.58) produced higher odds for fatality. Conclusion: A majority of the earthmoving equipment accidents resulted in fatality. Backhoes were the most common equipment involved in accidents and fatalities. Struck-by accidents were the most prevalent and most fatal. Non-OSHA compliant safety training, missing seatbelt, operator not using seatbelt, malfunctioning back-up alarms, and poorly maintained equipment were factors contributing to accidents and fatalities. On-foot workers experienced a higher number of accidents than operators, while fatality odds were higher for the operators. Practical applications: Safety professionals should benefit from our findings in planning and delivering training and providing oversight to workers in earthmoving equipment operations.     

Noise and neurotoxic chemical exposure relationship to workplace traumatic injuries: A review

IntroductionMore than 5,000 fatalities and eight million injuries occurred in the workplace in 2007 at a cost of $6 billion and $186 billion, respectively. Neurotoxic chemicals are known to affect central nervous system functions among workers, which include balance and hearing disorders. However, it is not known if there is an association between exposure to noise and solvents and acute injuries. Method: A thorough review was conducted of the literature on the relationship between noise or solvent exposures and hearing loss with various health outcomes. Results: The search resulted in 41 studies. Health outcomes included: hearing loss, workplace injuries, absence from work due to sickness, fatalities, hospital admissions due to workplace accidents, traffic accidents, hypertension, balance, slip, trips, or falls, cognitive measures, or disability retirement. Important covariates in these studies were age of employee, type of industry or occupation, or length of employment. Discussion: Most authors that evaluated noise exposure concluded that higher exposure to noise resulted in more of the chosen health effect but the relationship is not well understood. Studies that evaluated hearing loss found that hearing loss was related to occupational injury, disability retirement, or traffic accidents. Studies that assessed both noise exposure and hearing loss as risk factors for occupational injuries reported that hearing loss was related to occupational injuries as much or more than noise exposure. Evidence suggests that solvent exposure is likely to be related to accidents or other health consequences such balance disorders. Conclusions: Many authors reported that noise exposures and hearing loss, respectively, are likely to be related to occupational accidents. Practical applications: The potential significance of the study is that findings could be used by managers to reduce injuries and the costs associated with those injures.     

Blood on the coal: The effect of organizational size and differentiation on coal mine accidents

Introduction

Each year, there are at least 100,000,000 occupational accidents and 100,000 occupational deaths in the world. In the United States, one of the safest countries in the world in which to work, there were more than 5,400 workplace fatalities and 5.9 million workplace injuries in 2007. The cost to American industry and taxpayers is estimated to be at least $170 billion per year. Further, as illustrated by accidents such as Three Mile Island and Bhopal, industrial accidents potentially impact a much wider sphere than that of the injured worker and his or her employer. As the repercussions of organizational accidents reverberate through organizations and are felt from human resources to accounting, firms are beginning to incorporate messages of safety in their missions and strategies. As firms organize to achieve safer work environments, they are faced with decisions on how to structure their activities in terms of, among other things, size and differentiation.

Method

This paper explores the impact on accident rates of size and differentiation at the corporate and mine levels of mining companies in an effort to create a framework for thinking about organizational accidents from a structural perspective.

Results

The results suggest that larger mines are safer than smaller mines, and that mines with less task diversity are safer than mines with greater task diversity. The results also suggest that at the corporate level, task diversity decreases mine accidents. These results may help mining executives and engineers structure their corporate activities and individual mines more effectively to help reduce accidents.     

Investigation of accidents involving powered two wheelers and bicycles – A European in-depth study

Introduction: The number of road fatalities have been falling throughout the European Union (EU) over the past 20 years and most Member States have achieved an overall reduction. Research has mainly focused on protecting car occupants, with car occupant fatalities reducing significantly. However, recently there has been a plateauing in fatalities amongst ‘Vulnerable Road Users’ (VRUs), and in 2016 accidents involving VRUs accounted for nearly half of all EU road deaths. Method: The SaferWheels study collected in-depth data on 500 accidents involving Powered Two-Wheelers (PTWs) and bicycles across six European countries. A standard in-depth accident investigation methodology was used by each team. The Driver Reliability and Error Analysis Method (DREAM) was used to systematically classify accident causation factors. Results: The most common causal factors related to errors in observation by the PTW/bicycle rider or the driver of the other vehicle, typically called ‘looked but failed to see’ accidents. Common scenarios involved the other vehicle turning or crossing in front of the PTW/bicycle. A quarter of serious or fatal injuries to PTW riders occurred in accidents where the rider lost control with no other vehicle involvement. Conclusions: Highly detailed data have been collected for 500 accidents involving PTWs or bicycles in the EU. These data can be further analyzed by researchers on a case-study basis to gain detailed insights on such accidents. Preliminary analysis suggests that ‘looked but failed to see’ remains a common cause, and in many cases the actions of the other vehicle were the critical factor, though PTW rider speed or inexperience played a role in some cases. Practical Applications: The collected data can be analyzed to better understand the characteristics and causes of accidents involving PTWs and bicycles in the EU. The results can be used to develop policies aimed at reducing road deaths and injuries to VRUs.     

Quantification of risk perception: Development and validation of the construction worker risk perception (CoWoRP) scale

Introduction: The construction sector is leading in the number of accidents and fatalities; risk perception is the key to driving these numbers. Previous construction safety studies on risk perception quantification have not considered affective risk perception of construction workers or conducted comprehensive reliability and validity testing. Thus, this study aims to fill this need by developing a psychometrically sound instrument – the Construction Worker Risk Perception (CoWoRP) Scale – to assess the risk perception of construction workers. Method: Four phases of scale development, namely, item development, factor analysis, reliability assessment, and validity assessment were conducted with the collection and testing of data from a group (n = 469) of voluntary construction workers in Hong Kong. Results: The CoWoRP Scale with 13 items was shown to have acceptable test–retest reliability, internal consistency reliability, as well as content, convergent, discriminant, and criterion-related validity. Also, the CoWoRP Scale was affirmed to have three dimensions of worker risk perception, namely risk perception – probability, risk perception – severity, risk perception – worry and unsafe. These three dimensions of worker risk perception were negatively correlated with their risk-taking behavior. Conclusions: The CoWoRP Scale is a reliable and valid instrument for measuring the risk perception of construction workers and is expected to facilitate the construction safety studies that take risk perception of construction workers into account. Practical applications: The CoWoRP Scale could serve as an aptitude test to identify the characteristics of construction workers most likely to perceive lower risk in risky work situations. In turn, this information could help safety management provide safety training programs to those workers to enhance their risk perception and thereby minimizing their risk-taking behavior, reducing unnecessary training costs, and improving the construction safety performance.     

Temporary jobs and the severity of workplace accidents

Introduction. From the point of view of workplace safety, it is important to know whether having a temporary job has an effect on the severity of workplace accidents. We present an empirical analysis on the severity of workplace accidents by type of contract. Method. We used microdata collected by the Italian national institute managing the mandatory insurance against work related accidents. We estimated linear models for a measure of the severity of the workplace accident. We controlled for time-invariant fixed effects at worker and firm levels to disentangle the impact of the type of contract from the spurious one induced by unobservables at worker and firm levels. Results. Workers with a temporary contract, if subject to a workplace accident, were more likely to be confronted with severe injuries than permanent workers. When correcting the statistical analysis for injury under-reporting of temporary workers, we found that most of, but not all, the effect is driven by the under-reporting bias. Conclusions. The effect of temporary contracts on the injury severity survived the inclusion of worker and firm fixed effects and the correction for temporary workers' injury under-reporting. This, however, does not exclude the possibility that, within firms, the nature of the work may vary between different categories of workers. For example, temporary workers might be more likely to be assigned dangerous tasks because they might have less bargaining power. Practical implications. The findings will help in designing public policy effective in increasing temporary workers' safety at work and limiting their injury under-reporting.     

Fatal and serious injuries related to vulnerable road users in Canada

IntroductionThe goals of this study were to analyze possible trends of fatal and serious injuries related to vulnerable road users in Canada (pedestrians, cyclists and motorcyclists) from 1990 to 2012 and the role of alcohol and drugs in these cases. Drugs have rarely been documented with respect to vulnerable road users.MethodThe Traffic Injury Research Foundation's National Fatality and Serious Injury Databases and the Public Health Agency of Canada's Canadian Hospitals Injury Reporting and Prevention Program databases were used. Numbers and rates of fatalities and serious injuries among vulnerable road users were analyzed and regression models were used to assess changes over time.ResultsThe analyses show that while the absolute number of fatalities and the rate per 100,000 population among vulnerable road users may be decreasing, no such trends are apparent when looking at the proportions of these road user fatalities out of all motor-vehicle fatalities. The trend for the proportion of motorcyclist fatalities is significantly increasing (coef. = 0.16, p < 0.001). The elderly (76 years or older) are overrepresented among pedestrian fatalities, and serious injuries (they represent 18.5% of all pedestrian fatalities but only 5.8% of the population), while those 15 years or younger are overrepresented among cyclists (they represent 23.3% of cyclist fatalities but 19.5% of the population), and those 16 to 25 years old are overrepresented among motorcyclists (27.2% of motorcyclists fatalities and 13.6% of population). Alcohol and drug use among fatally injured vulnerable road users were significant problems, especially among pedestrians. Among fatally injured pedestrians tested for alcohol and drugs, 39.7% and 43.4% tested positive, respectively.ConclusionsWith the promotion of walking and cycling as forms of exercise and the popularity of motorcycling, the safety of vulnerable road users is an important issue. The results corroborate previous research and extend our understanding about the influence of alcohol and drugs in vulnerable road user injuries.Practical applicationsThese findings can help better inform prevention and mitigation initiatives for vulnerable road users.     

Investigating traffic fatality trends and restraint use among rear-seat passengers in the United States, 2000–2016

Introduction: Motor-vehicle crash is one of the leading causes of unintentional injury death in the United States. Previous studies focused on fatalities among drivers and front-seat passengers, with a limited number of studies examining rear-seat passenger fatalities. The objectives of this study were to assess trends in rear-seat passenger motor-vehicle fatalities in the United States from 2000 to 2016 and to identify demographic factors associated with being unrestrained among fatally injured rear-seat passengers. Methods: Rear-seat passenger fatality data were obtained from the Fatality Analysis Reporting System (FARS) database. The fatality rate ratios for overall rear-seat passengers and for different age and sex groups were determined by comparing fatality rates in 2000 and 2016 using random effects models. Risk ratios of being unrestrained for age and sex groups were obtained using general estimating equations. Results: Compared to 2000, the overall rear-seat passenger fatality rate in 2016 decreased by 44% (95% confidence interval [CI]: 39–49%). In particular, the fatality rate among rear-seat passengers decreased more in males than females, and passengers aged 14–19 years experienced a larger decline than all other age groups. Fatally injured male rear-seat passengers had a higher risk of being unrestrained (adjusted risk ratio: 1.06, 95% CI: 1.04–1.07) than their female counterparts, and both youngest (≤13 years) and oldest (65–85 years) passengers were less likely to be unrestrained than those aged 20–64 years. Conclusions: Overall, fatality rates among rear-seat passengers have declined, with differential degrees of improvement by age and sex. Practical Applications: Continued restraint use enforcement campaigns targeted at teenagers and males would further preserve them from fatal injuries and improve traffic safety for the overall population.     

An in-depth analysis of self-reported cycling injuries in single and multiparty bicycle crashes in Denmark

Introduction: Cycling is one of the main forms of transportation in Denmark. However, while the number of traffic crash fatalities in the country has decreased over the past decade, the frequency of cyclists killed or seriously injured has increased. The high rate of serious injuries and fatalities associated with cycling emphasizes the increasing need for mitigating the severity of such crashes. Method: This study conducted an in-depth analysis of cyclist injury severity resulting from single and multiparty bicycle-involved crashes. Detailed information was collected using self-reporting data undertaken in Denmark for a 12-month period between 1 November 2012 and 31 October 2013. Separate multilevel logistic (MLL) regression models were applied to estimate cyclist injury severity for single and multiparty crashes. The goodness-of-fit measures favored the MLL models over the standard logistic models, capturing the intercorrelation among bicycle crashes that occurred in the same geographical area. Results: The results also showed that single bicycle-involved crashes resulted in more serious outcomes when compared to multiparty crashes. For both single and multiparty bicycle crash categories, non-urban areas were associated with more serious injury outcomes. For the single crashes, wet surface condition, autumn and summer seasons, evening and night periods, non-adverse weather conditions, cyclists aged between 45 and 64 years, male sex, riding for the purpose of work or educational activities, and bicycles with light turned-off were associated with severe injuries. For the multiparty crashes, intersections, bicycle paths, non-winter season, not being employed or retired, lower personal car ownership, and race bicycles were directly related to severe injury consequences. Practical Applications: The findings of this study demonstrated that the best way to promote cycling safety is the combination of improving the design and maintenance of cycling facilities, encouraging safe cycling behavior, and intensifying enforcement efforts.     

A Bayesian network analysis of workplace accidents caused by falls from a height

This article analyses, using Bayesian networks, the circumstances surrounding workplace tasks performed using auxiliary equipment (ladders, scaffolding, etc.) that may result in falls. The information source was a survey of employees working at a height. We were able to determine the usefulness of this approach – innovative in the accident research field – in identifying the causes that have the greatest bearing on accidents involving auxiliary equipment: in these cases, the adoption of incorrect postures during work and a worker’s inadequate knowledge of safety regulations. Likewise, the duration of tasks was also associated with both these variables, and therefore, with the accident rate. Bayesian networks also enable dependency relationships to be established between the different causes of accidents. This information – which is not usually furnished by conventional statistical methods applied in the field of labour risk prevention – allow a causality model to be defined for workplace accidents in a more realistic way. With this statistic tool, the expert is also provided with useful information that can be input to a management model for labour risk prevention.     

Factors contributing to serious and fatal injuries in belted rear seat occupants in frontal crashes

Abstract

Objectives: Earlier research has shown that the rear row is safer for occupants in crashes than the front row, but there is evidence that improvements in front seat occupant protection in more recent vehicle model years have reduced the safety advantage of the rear seat versus the front seat. The study objective was to identify factors that contribute to serious and fatal injuries in belted rear seat occupants in frontal crashes in newer model year vehicles.

Methods: A case series review of belted rear seat occupants who were seriously injured or killed in frontal crashes was conducted. Occupants in frontal crashes were eligible for inclusion if they were 6 years old or older and belted in the rear of a 2000 or newer model year passenger vehicle within 10 model years of the crash year. Crashes were identified using the 2004–2015 National Automotive Sampling System Crashworthiness Data System (NASS-CDS) and included all eligible occupants with at least one Abbreviated Injury Scale (AIS) 3 or greater injury. Using these same inclusion criteria but split into younger (6 to 12 years) and older (55+ years) cohorts, fatal crashes were identified in the 2014–2015 Fatality Analysis Reporting System (FARS) and then local police jurisdictions were contacted for complete crash records.

Results: Detailed case series review was completed for 117 rear seat occupants: 36 with Maximum Abbreviated Injury Scale (MAIS) 3+ injuries in NASS-CDS and 81 fatalities identified in FARS. More than half of the injured and killed rear occupants were more severely injured than front seat occupants in the same crash. Serious chest injury, primarily caused by seat belt loading, was present in 22 of the injured occupants and 17 of the 37 fatalities with documented injuries. Nine injured occupants and 18 fatalities sustained serious head injury, primarily from contact with the vehicle interior or severe intrusion. For fatal cases, 12 crashes were considered unsurvivable due to a complete loss of occupant space. For cases considered survivable, intrusion was not a large contributor to fatality.

Discussion: Rear seat occupants sustained serious and fatal injuries due to belt loading in crashes in which front seat occupants survived, suggesting a discrepancy in restraint performance between the front and rear rows. Restraint strategies that reduce loading to the chest should be considered, but there may be potential tradeoffs with increased head excursion, particularly in the absence of rear seat airbags. Any new restraint designs should consider the unique needs of the rear seat environment.     

OHSAS 18001 certification and work accidents: Shedding light on the connection

Introduction: The implications of OHSAS 18001 for substantive Occupational Health and Safety outcomes such, as a reduction in work accidents, have been under-researched in the scholarly literature. The impact of this standard on other aspects of performance, such as profitability and productivity, has attracted more attention. Method: This article aims to fill this gap by shedding light on the relationship between OHSAS 18001 certification and the rates of minor, serious, and fatal accidents per employee at work experienced in certified and non-certified companies. Results: Based on an analysis of a sample of 5,147 Spanish firms, the findings show that OHSAS 18001 certification is only loosely related with better occupational health and safety performance measured in terms of rate of accidents at work. A propensity for OHSAS 18001 certification to be found in economic sectors of activity with worse occupational health and safety outcomes in terms of rate of work-related accidents is identified. There is evidence of a negative selection-effect of the main international management standard for occupational health and safety. Potential distortions and biases that may be related to these and other findings in the scholarly literature are analyzed. Managerial implications of the main findings, implications for policy makers, and avenues for future research are discussed.     

Land-traffic crash leading to passenger vehicle submersion,drowning and other fatal injuries: A 44-year study based on records from the Finnish Crash Data Institute

Background: Land motor traffic crash (LMTC) -related drownings are an overlooked and preventable cause of injury death. The aim of this study was to analyze the profile of water-related LMTCs involving passenger cars and leading to drowning and fatal injuries in Finland, 1972 through 2015. Materials and methods: The database of the Finnish Crash Data Institute (FCDI) that gathers detailed information on fatal traffic accidents provided records on all LMTCs leading to drowning during the study period and, from 2002 to 2015, on all water-related LMTCs, regardless of the cause of death. For each crash, we considered variables on circumstances, vehicle, and fatality profiles. Results: During the study period, the FCDI investigated 225 water-related LMTCs resulting in 285 fatalities. The majority of crashes involved passenger cars (124), and the cause of death was mostly drowning (167). Only 61 (36.5%) fatalities suffered some–generally mild–injuries. The crashes frequently occurred during fall or summer (63.7%), in a river or ditch (60.5%), and resulted in complete vehicle’s submersion (53.7 %). Half of the crashes occurred in adverse weather conditions and in over 40% of the cases, the driver had exceeded the speed limit. Among drivers, 77 (68.8%) tested positive for alcohol (mean BAC 1.8%). Conclusion: Multidisciplinary investigations of LMTCs have a much higher potential than do exclusive police and medico-legal investigations. The risk factors of water-related LMTCs are similar to those of other traffic crashes. However, generally the fatal event in water-related LMTC is not the crash itself, but drowning. The paucity of severe physical injuries suggests that victims’ functional capacity is usually preserved during vehicle submersion. Practical Applications: In water-related LMTCs, expansion of safety measures is warranted from general traffic-injury prevention to prevention of drowning, including development of safety features for submerged vehicles and simple self-rescue protocols to escape from a sinking vehicle.     

Road traffic accident severity analysis: A census-based study in China

Background: In China, despite the decrease in average road traffic fatalities per capita, the fatality rate and injury rate have been increasing until 2015. Purpose: This study aims to analyze the road traffic accident severity in China from a macro viewpoint and various aspects and illuminate several key causal factors. From these analyses, we propose possible countermeasures to reduce accident severity. Method: The severity of traffic accidents is measured by human damage (HD) and case fatality rate (CFR). Different categorizations of national road traffic census data are analyzed to evaluate the severity of different types of accidents and further to demonstrate the key factors that contribute to the increase in accident severity. Regional data from selected major municipalities and provinces are also compared with national traffic census data to verify data consistency. Results: From 2000 to 2016, the overall CFR and HD of road accidents in China have increased by 19.0% and 63.7%, respectively. In 2016, CFR of freight vehicles is 33.5% higher than average; late-night accidents are more fatal than those that occur at other periods. The speeding issue is severely becoming worse. In 2000, its CFR is only 5.3% higher than average, while in 2016, the number is 42.0%. Conclusion and practical implementation: A growing trend of accident severity was found to be contrasting to the decline of road traffic accidents. From the analysis of casual factors, it was confirmed that the release way of the impact energy and the protection worn by the victims are key variables contributing to the severity of road traffic accidents.     

Traffic climate and driver behaviors: The moderating role of driving skills in Turkey and China

Introduction: While road traffic accidents and fatalities are a worldwide problem, the rates of road traffic accidents and fatalities show differences among countries. Similarly, driver behaviors, traffic climate, and their relationships also show differences among countries. The aim of the current study is to investigate the moderating effect of driving skills on the relationship between traffic climate and driver behaviors by country. (Turkey and China). Method: There were 294 Turkish drivers and 292 Chinese drivers, and they completed the Traffic Climate Scale, the Driving Skills Inventory, and the Driver Behavior Questionnaire. The moderated moderation analyses were conducted with Hayes PROCESS tool on SPSS. Results: The results showed that safety skills moderated the relationship between internal requirements and violations both in Turkey and China. Safety skills also moderated the relationship between internal requirements and errors only in China and the relationship between functionality and violations in Turkey. Perceptual-motor skills moderated the relationships between external affective demands and errors, and also the relationship between internal requirements and positive driver behaviors in Turkey. It can be inferred that driving skills has different influences on traffic climate-driver behaviors relationship in different cultures and there might be cultural differences in the evaluation of drivers’ own driving skills. Practical Applications: Among driving skills, safety skills have a more critical role to increase road safety by decreasing number of violations. Interventions to increase safety skills of drivers might be promising for road safety.     

An analysis of human factors in fifty controlled flight into terrain aviation accidents from 2007 to 2017

Introduction: Controlled Flight Into Terrain (CFIT) account for a considerable amount of fatalities when compared to other accident categories. Human factors are deemed significant contributory causes in these accidents. This paper aims to identify the human factors involved with aviation accidents that resulted in CFIT. Method: The study used the Human Factors Analysis and Classification System (HFACS) framework to determine the factors involved in 50 CFIT accidents from 24 counties over a 10 year period, i.e. 2007–2017. Interviews with five senior aviation safety experts were used to provide a better comprehension of the human factors affecting the flight safety. Results: The study identified 1289 individual causal and contributory human factors with unsafe actions and preconditions for unsafe actions being the main subcategories of the accidents. The study found that CFIT occur across a range of pilot experience and 44% of accidents occurred in cruise flight. Distraction, complacency and fatigue are all elements that flight crews may experience as contributors to CFIT during cruising. Conclusions: Human factors represent a major component of CFIT accidents. The analysis revealed a similar pattern of contributory and causal human factors across the various flight categories, with some noteworthy isolated variations. The prevalent factors were decision and skill-based errors along with communication, coordination and planning issues. Practical applications: Provision of specific CFIT awareness, pilot training focusing on improved decision-making and revision of basic flight skills, development of specific Global Positioning System routes for transiting high terrain areas are necessary to prevent CFIT accidents. Installation of Terrain Avoidance and Warning System and Ground Proximity Warning System and appropriate equipment training, specific CFIT Crew Resource Management training and improvement of organizational knowledge on the elements involved in CFIT are also recommended.     

重特大事故的离散幂律分布——以煤矿事故为例

研究近年来我国每起煤矿重大和特别重大事故死亡人数统计数据,建立其概率分布模型。基于极大似然法和柯尔莫哥洛夫一斯米尔诺夫检验方法（K-S方法）估计我国煤矿重大和特别重大事故离散幂律分布的参数,并采用MonteCarlo方法随机生成大量的检验样本,对其进行K-S方法拟合优度检验。结果表明在统计学意义上我国煤矿重大和特别重大事故死亡人数比高斯分布的值大得多,服从标度指数为2．72的离散幂律分布。     

Nighttime pedestrian fatalities: A comprehensive examination of infrastructure,user, vehicle,and situational factors

Introduction: Pedestrian fatalities in the United States increased 45.5% between 2009 and 2017. More than 85% of those additional pedestrian fatalities occurred at night. Method: We examine Fatality Analysis Reporting System (FARS) data for fatal pedestrian crashes that occurred in the dark between 2002 and 2017. Within-variable and before/after examinations of crashes in terms of infrastructure, user, vehicle, and situational characteristics are performed with one-way analysis of variance (ANOVA) and two-sample t-tests. We model changes in crash characteristic proportions between 2002–2009 and 2010–2017 using linear regressions and test for autocorrelation with Breusch-Godfrey tests. Results: The increase in fatal nighttime pedestrian crashes is most strongly correlated with infrastructure factors: non-intersection unmarked locations (saw 80.8% of additional fatalities); 40–45 mph roads (54.6%); five-lane roads (40.7%); urban (99.7%); and arterials (81.1%). In addition, SUVs were involved in 39.7% of additional fatalities, overrepresenting their share of the fleet. Increased pedestrian alcohol and drug involvement warrant further investigation. The age of pedestrians killed increased more (18.1%) than the national average (3.2%). Conclusions: By identifying factors related to the increase in nighttime pedestrian fatalities, this work constitutes a vital first step in making our streets safer for pedestrians. Practical Applications: More research is needed to understand the efficacy of different solutions, but this paper provides guidance for such future research. Engineering solutions such as road diets or traffic calming may be used to improve identified infrastructure issues by reducing vehicle speeds and road widths. Rethinking vehicle design, especially high front profiles, may improve vehicle issues. However, the problems giving rise to these pedestrian fatalities are likely a result of not only engineering issues but also interrelated social and political factors. Solutions may be correspondingly comprehensive, employing non-linear, systems-based approaches such as Safe Systems.     

Situational characteristics of fatal pedestrian accidents involving vehicles traveling at low speeds in Japan

Abstract

Objective: This study aimed to investigate the situational characteristics of fatal pedestrian accidents involving vehicles traveling at low speeds in Japan. We focused on vehicles with 4 or more wheels. Such characteristics included daytime or nighttime conditions, road type, vehicle behaviors preceding the accident, and vehicle impact locations.

Methods: Pedestrian fatality data on vehicle–pedestrian accidents were obtained from the Institute for Traffic Accident Research and Data Analysis of Japan (ITARDA) from 2005 to 2014. Nine vehicle classifications were considered: Trucks with gross vehicle weight (GVW) ≥7.5 tons and <7.5 tons, buses, box vans, minivans, sport utility vehicles (SUVs), sedans, light passenger cars (LPCs), and light cargo vans (LCVs). We compared the situational daytime or nighttime conditions, road type, vehicle behaviors preceding the accident, and vehicle impact locations for accident-involved vehicles traveling at low and higher speeds across all vehicle types.

Results: The results indicate that pedestrian fatalities involving vehicles traveling at low speeds occurred more often under daytime conditions across all vehicle types. At signalized intersections, the relative proportions of pedestrian fatalities were significantly higher when vehicles were traveling at low speed, except when the accidents involved box vans or SUVs. Similarly, when vehicles turned right, the relative proportions of pedestrian fatalities were significantly higher when vehicles traveling at low speed were involved across all vehicle types. In terms of the frontal right vehicle impact location, the relative proportions of pedestrian fatalities were significantly higher when trucks with GVW ≥7.5 tons or <7.5 tons, sedans, or LCVs traveling at low speed were involved.

Conclusions: The situational characteristics of fatal pedestrian accidents involving vehicles traveling at low speeds identified in this study can guide targeted development of new traffic safety regulations or technologies specific to vehicle–pedestrian interactions at low vehicle travel speeds (i.e., driver alert devices or automated emergency braking systems). Ultimately, these developments can improve pedestrian safety by reducing the frequency or severity of vehicle–pedestrian accidents for vehicles turning right at intersections and/or reducing the number of resultant pedestrian fatalities.