Improvement of the BCR three step sequential extraction procedure prior to the certification of new sediment and soil reference materials

The Standards, Measurements and Testing Programme (formerly BCR) of the European Commission proposed a three-step sequential extraction procedure for sediment analysis, following extensive expert consultations and two interlaboratory studies. This scheme was recently used to certify the extractable trace element contents of a sediment reference material (CRM 601). Although this procedure offers a means to ensure the comparability of data in this field, some difficulties concerning the interlaboratory reproducibility still remain, and a new project is currently being conducted to determine the causes of poor reproducibility in the extraction scheme. The final objective of the project is the certification of new sediment and soil reference materials for their extractable contents of Cd, Cr, Cu, Ni, Pb and Zn. This paper presents the results of a small-scale interlaboratory study, which aimed to test a revised version of the extraction schemes by comparing the original and the modified protocols using the CRM 601 sample. This work offers an improvement to the BCR sequential extraction procedure through intercomparison exercises. This improved procedure will allow the obtaining of CRMs to validate analytical data in the analysis of soils and sediments, and it will also facilitate comparability of data in the European Union.     

土壤重金属含量测定不同消解方法比较研究

消解是影响土壤重金属测定结果准确性的关键步骤.比较电热板消解、微波消解和全自动石墨消解3种消解方法的操作流程,同时对不同类型土壤样品中Cu、Zn、Pb、Cd、Cr、Ni 6种元素含量进行对比测定,结果表明,电热板消解设备简单,但步骤繁锁,操作不当易造成组分损失；微波消解速度快,测定结果精密性和准确性较好,但仍需人工赶酸程序且罐位少,不适合大批量样品分析；全自动石墨消解不仅测定结果精密性和准确性较好,而且自动化程度高,可实现无人值守,大大节省人力,尤其适合大批量样品的分析.     

Feasibility study prior to the certification of trace elements in urban and industrial wastewater reference materials

Reliable results for the determination of trace elements in urban and industrial wastewaters are of paramount importance for both checking the performance of sewage treatment and for detecting possible urban or industrial contamination sources. The quality control of measurements should in principle rely on external tools such as certified reference materials (CRM), which should represent, as closely as possible, the matrix of samples currently analysed, e.g., in the frame of environmental monitoring. To date, however, no CRM representatives of wastewater composition are available, which limits the possibility for control laboratories to check their QC externally. To fill this gap, the European Commission's Standards, Measurements and Testing Programme (formerly BCR) has started a European collaborative project of which the aim is to test the feasibility of preparation of wastewater reference materials and the analytical state-of-the-art to enable the certification of trace elements in such matrices. This paper presents the results of the first phase of this project, namely the feasibility study and the results of an interlaboratory trial.     

SI-traceable certification of Cu, Cr, Cd and Pb in sediment and fly ash candidate reference materials

Many fields in environmental analytical chemistry deal with very low limits and thresholds as set by governmental legislations or transnational regulations. The need for the accuracy, comparability and traceability of analytical measurements in environmental analytical chemistry has significantly increased and total uncertainties are even asked for by accreditation bodies of environmental laboratories. This paper addresses achieving these goals to guarantee accuracy, quality control, quality assurance or validation of a method by means of certified reference materials. The assessment of analytical results in certified reference materials must be as accurate as possible and every single step has to be fully evaluated. This paper presents the SI-traceable certification of Cu, Cr, Cd and Pb contents in geological and environmentally relevant matrices (three sediments and one fly ash sample). Certification was achieved using isotope dilution (ID) ICPMS as a primary method of measurement. In order to reduce significantly the number of analytical steps and intermediate samples a multiple spiking approach was developed. The full methodology is documented and total uncertainty budgets are calculated for all certified values. A non-element specific sample digestion process was optimised. All wet chemical digestion methods examined resulted in a more or less pronounced amount of precipitate. It is demonstrated that these precipitates originate mainly from secondary formation of fluorides (essentially CaF2) and that their formation takes place after isotopic equilibration. The contribution to the total uncertainty of the final values resulting from the formation of such precipitates was in general < 0.1% for all investigated elements. Other sources of uncertainty scrutinised included the moisture content determination, procedural blank determination, cross-contamination from the different spike materials, correction for spectral interferences, instrumental background and deadtime effects, as well as the use of either certified values or IUPAC data in the IDMS equation. The average elemental content in the sediment samples was 30-130 micrograms g-1 for Pb, 0.5-3 micrograms g-1 for Cd and 50-70 micrograms g-1 for Cu. Cr was measured in one sample and was about 60 micrograms g-1. The concentrations in the fly ash sample were up to 2 orders of magnitude higher. Expanded uncertainty for the investigated elements was about 3% (coverae factor k = 2) except for Cr, (measured by high resolution ICPMS), for which the expanded uncertainty was about 7% (k = 2).     

固体废物氰化物总量和浸出毒性测定方法的比较

中国现行的固体废物氰化物总量和氰化物浸出毒性的分析方法存在缺陷，不便于广泛指导监测工作，笔者优化了固体废物氰化物测定的前处理方法，明确了固体废物氰化物总量、氰化物浸出毒性测定时的样品粒径、浸提方法和消解方法，建立了容量法、分光光度法、流动注射法测定固体废物氰化物总量和浸出毒性的方法，并与标准方法（离子色谱法）进行比较。实验结果表明：容量法、分光光度法、流动注射法测定结果与离子色谱法无显著差异，3种方法测定固体废物氰化物总量加标回收率为80.5%~102%，平行样测定相对标准偏差为3.0%~6.9%，3种方法测定固体废物氰化物浸出毒性加标回收率为80.1%~107%，平行样测定相对标准偏差为7.8%~9.5%，3种方法测定结果精密度和准确度良好，均能够满足固体废物氰化物总量和氰化物浸出毒性的测定要求。其中容量法、分光光度法由于其仪器设备简单、操作简便，可用于突发环境事件应急监测等情况下固体废物氰化物的测定。但容量法检出限较高，不能满足评价标准较低的分析测试工作要求，离子色谱法、分光光度法和流动注射法检出限均能满足一般分析测试要求。     

Investigation of 15-year-old municipal solid waste deposit profiles by means of FTIR spectroscopy and thermal analysis

Five profiles of a 15-year-old bank containing over three weeks composted municipal solid waste were characterized by means of different parameters habitually applied in waste management (loss on ignition, total organic carbon, total nitrogen, NH(4)-N, pH), and in addition by humic acid determination, FTIR spectroscopy and thermal analysis. Stabilization processes are revealed by humic acid contents. Over the 15 year period organic matter had developed in various ways. Highest humic acid contents were found at 0.5 m below the surface. Below 1.0-1.5 m anaerobic conditions dominated causing a strong decline of humic acid concentrations. Despite similar contents of organic matter at 0.5 m and at 3.0 m organic matter quality differed. These differences were verified by infrared spectroscopic investigations and thermal analyses (differential scanning calorimetry DSC). The spectral pattern of 15-year-old profile samples (municipal solid waste including the biogenic fraction) was compared to current municipal solid waste and abandoned landfill materials. Current municipal solid waste samples comprised different degradation stages from fresh materials to stabilized waste, suitable for landfilling according to Austrian standards. Municipal solid waste originating from abandoned landfills closed in the seventies represented stable material. Principal component analysis was performed to detect similarities and differences. It is evident that the profile samples constitute a particular group in between municipal solid waste and abandoned landfill material. Some differences can be attributed to the divergent composition of municipal solid waste in the eighties when the organic fraction was not separated. Otherwise, landfill materials from the seventies with the same composition regarding the organic fraction were deposited together with construction waste. Heat flow curves (DSC profiles) of municipal solid waste, representing different decomposition stages, illustrate the development of enthalpies and reveal the status of the profile samples. It is evident that mechanical-biological pretreatment leads to a faster stabilization of waste organic matter.     

Interlaboratory trial to determine the analytical state-of-the-art of bromate determination in drinking water

The new European Directive for water intended for human consumption has established a regulatory level for bromate at 10 microg L(-1). This Maximum Admissible Concentration requires analytical methods with detection limits of a least 2.5 microg L(-1). A project funded by the Standards, Measurements and Testing Programme of the European Commission has enabled the improvement and/or development of methods for the determination of bromate at such concentration levels. This collaborative work was concluded by the organisation of an interlaboratory trial involving 26 European laboratories, which enabled the testing of both a draft ISO Standard method and alternative methods. This paper presents the results of this interlaboratory trial, along with results of a bromate stability study. The progress made with respect to the analytical state-of-the-art for bromate will greatly benefit the quality of measurements carried out in water quality monitoring.     

Ultrasonic extraction and portable anodic stripping voltammetric measurement of lead in paint, dust wipes, soil, and air: an interlaboratory evaluation

Recent studies have demonstrated the utility of ultrasonic extraction (UE), followed by portable anodic stripping voltammetry (ASV), for the on-site determination of lead in environmental and industrial hygiene samples. The aim of this work was to conduct an interlaboratory evaluation of the UE-ASV procedure, with a goal of establishing estimates of method performance based on results from collaborative interlaboratory analysis. In this investigation, performance evaluation materials (PEMs) with characterized lead concentrations were used for interlaboratory testing of the UE-ASV procedure. The UE-ASV protocol examined has been promulgated in the form of two separate national voluntary consensus standards (one for UE and another for electroanalysis, which includes ASV). The PEMs consisted of characterized and homogenized paints, soils, and dusts (the last of which were spiked onto wipes meeting national voluntary consensus standard specifications), and air filter samples (mixed cellulose ester membrane) generated using characterized paints within an aerosol chamber. The lead concentrations within the PEMs were chosen so as to bracket pertinent action levels for lead in the various sample matrices. The interlaboratory evaluation was conducted so as to comply with an applicable national voluntary consensus standard that can be used to estimate the interlaboratory precision of a given analytical test method. Based on the analytical results reported by the participating laboratories, relative standard deviations (RSDs) for repeatability and reproducibility were computed for three different lead contents of the four PEMs. RSDs for repeatability were 0.019-0.100 for paints; 0.030-0.151 for soils; 0.085-0.134 for dust wipes; and 0.095-0.137 for air filters. RSDs for reproducibility were 0.127-0.213 for paints; 0.062-0.162 for soils; 0.085-0.134 for dust wipes; and 0.114-0.220 for air filters. With the exception of one of the air filter samples and one of the paint samples, the precision estimates were within the +/- 20% precision requirement specified in the US Environmental Protection Agency National Lead Laboratory Accreditation Program (NLLAP). The results of this investigation illustrate that the UE-ASV procedure is an effective method for the quantitative measurement of lead in the matrices evaluated in this study.     

Determination of toxic metals in leather by wavelength dispersive X-ray fluorescence (WDXRF) and inductively coupled plasma optical emission spectrometry (ICP OES) with emphasis on chromium

The tanning industry is one of the largest environmental polluters due to high generation waste in all production processes, but the tanning is particularly worrisome due to the use of significant amounts of chromium. Cr is an element potentially toxic to both health and the environment, depending on the concentration and the oxidation state. Cr(VI) can come in contact with human skin when using leather goods, which can cause allergies and dermatitis, besides being carcinogenic. Considering that approximately 90% of the world production of leather is performed with Cr salts, the determination of this element in leather is necessary to avoid exposure to the risks that the element can provide. The main goal of this study was the development of an alternative analytical method for the determination of Cr in leathers (ovine and bovine leather tanned with Cr and vegetable tannin) using wavelength dispersive X-ray fluorescence (WDXRF) for direct solid analysis. Besides performing analysis of the chemical composition and determination of Al, As, Ba, Ca, Cd, Cr, Cu, Fe, Mg, Ni, Pb, Sb, Sr, Ti, and Zn in leather by inductively coupled plasma optical emission spectrometry (ICP OES). Principal component analysis (PCA) was also used in the evaluation of the WDXRF and ICP OES data sets. WDXRF calibration models for Cr presented satisfactory figures of merit and the analysis of the leathers revealed an alarming concentration of total Cr in the samples reaching 21,353 mg kg^?1.     

Monitoring of Cr, Cu, Pb, V and Zn in polluted soils by laser induced breakdown spectroscopy (LIBS)

Laser Induced Breakdown Spectroscopy (LIBS) is a fast and multi-elemental analytical technique particularly suitable for the qualitative and quantitative analysis of heavy metals in solid samples, including environmental ones. Although LIBS is often recognised in the literature as a well-established analytical technique, results about quantitative analysis of elements in chemically complex matrices such as soils are quite contrasting. In this work, soil samples of various origins have been analyzed by LIBS and data compared to those obtained by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES). The emission intensities of one selected line for each of the five analytes (i.e., Cr, Cu, Pb, V, and Zn) were normalized to the background signal, and plotted as a function of the concentration values previously determined by ICP-OES. Data showed a good linearity for all calibration lines drawn, and the correlation between ICP-OES and LIBS was confirmed by the satisfactory agreement obtained between the corresponding values. Consequently, LIBS method can be used at least for metal monitoring in soils. In this respect, a simple method for the estimation of the soil pollution degree by heavy metals, based on the determination of an anthropogenic index, was proposed and determined for Cr and Zn.     

水中汞监测存在的问题与解决办法

利用中日合作 (JICA)项目资金 ,对测定地表水中汞存在的主要问题 ,如水样的保存和处理 ,水样的消解 ,测汞的冷原子吸收法和原子荧光法等进行了研究。通过对 33个环境监测站的样品考核 ,发现测定结果与标准值相比 ,偏高的数据达 75 %以上。提出了用 1%H2 SO4 和 0 1%K2 Cr2 O7保存水样最好 ;高锰酸钾 -过硫酸钾消解法适用于消解含有机物、悬浮物和组成复杂的废水样 ,高锰酸钾 -硫酸消解法适用于消解被有机物轻度污染的废水 ,溴酸钾 -溴化钾消解法适用于消解地表水和含较少有机物的生活污水及工业废水。研究表明 :尤以硫酸 -高锰酸钾 -过硫酸钾消解体系消解地表水和废水效果良好。对冷原子吸收法和原子荧光法中影响汞测定的因素 ,如空白值高、干扰物的消除、载气种类和流量、反应瓶体积和气液比以及反应时间等提出了详尽的解决方法     

Interlaboratory evaluation of an extraction and fluorescence method for the determination of trace beryllium in soils

Analytical methods for the determination of trace beryllium in soils are needed so that anthropogenic sources of this element can be distinguished from native (background) levels of beryllium. In this work, a collaborative interlaboratory evaluation of a new extraction and fluorescence-based procedure for determining beryllium in soil samples was carried out to fulfil method validation requirements for ASTM International voluntary consensus standard test methods. A Canadian reference material, CCRMP Till-1 soil, with a background beryllium concentration of 2.4 microg g(-1), was selected for study. This certified reference material (CRM) was spiked and homogenized with varying levels of beryllium oxide in order to give batches of material with beryllium concentrations of 4.36 +/- 0.69, 11.5 +/- 0.7, 124 +/- 7 and 246 +/- 16 microg g(-1) (+/- values are standard deviations). In the interlaboratory study (ILS), which was carried out in accordance with an applicable ASTM International standard practice (ASTM E691), samples of these spiked soils were subjected to extraction in dilute ammonium bifluoride at approximately 90 degrees C for 40 h. Fluorescence measurement of the extracted beryllium was carried out via detection using the high quantum yield fluorophore, hydroxybenzoquinoline sulfonate (HBQS). Interlaboratory precision estimates from six participating laboratories ranged from 0.048 to 0.103 (relative standard deviations) for the five different beryllium concentrations. Pooled bias estimates resulting from this ILS were between -0.049 and 0.177 for the various beryllium levels. These figures of merit support promulgation of the analytical procedure as an ASTM International standard test method.     

Interlaboratory evaluation of trace element determination in workplace air filter samples by inductively coupled plasma mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) is becoming more widely used for trace elemental analysis in the occupational hygiene field, and consequently new ICP-MS international standard procedures have been promulgated by ASTM International and ISO. However, there is a dearth of interlaboratory performance data for this analytical methodology. In an effort to fill this data void, an interlaboratory evaluation of ICP-MS for determining trace elements in workplace air samples was conducted, towards fulfillment of method validation requirements for international voluntary consensus standard test methods. The study was performed in accordance with applicable statistical procedures for investigating interlaboratory precision. The evaluation was carried out using certified 37-mm diameter mixed-cellulose ester (MCE) filters that were fortified with 21 elements of concern in occupational hygiene. Elements were spiked at levels ranging from 0.025 to 10 μg filter(-1), with three different filter loadings denoted "Low", "Medium" and "High". Participating laboratories were recruited from a pool of over fifty invitees; ultimately twenty laboratories from Europe, North America and Asia submitted results. Triplicates of each certified filter with elemental contents at three different levels, plus media blanks spiked with reagent, were conveyed to each volunteer laboratory. Each participant was also provided a copy of the test method which each participant was asked to follow; spiking levels were unknown to the participants. The laboratories were requested to prepare the filters by one of three sample preparation procedures, i.e., hotplate digestion, microwave digestion or hot block extraction, which were described in the test method. Participants were then asked to analyze aliquots of the prepared samples by ICP-MS, and to report their data in units of μg filter(-1). Most interlaboratory precision estimates were acceptable for medium- and high-level spikes (RSD <25%), but generally yielded greater uncertainties than were anticipated at the outset of the study.     

Comparison of three sampling and analytical methods for the determination of airborne hexavalent chromium

A field study was conducted with the goal of comparing the performance of three recently developed or modified sampling and analytical methods for the determination of airborne hexavalent chromium (Cr(VI)). The study was carried out in a hard chrome electroplating facility and in a jet engine manufacturing facility where airborne Cr(VI) was expected to be present. The analytical methods evaluated included two laboratory-based procedures (OSHA Method ID-215 and NIOSH Method 7605) and a field-portable method (NIOSH Method 7703). These three methods employ an identical sampling methodology: collection of Cr(VI)-containing aerosol on a polyvinyl chloride (PVC) filter housed in a sampling cassette, which is connected to a personal sampling pump calibrated at an appropriate flow rate. The basis of the analytical methods for all three methods involves extraction of the PVC filter in alkaline buffer solution, chemical isolation of the Cr(VI) ion, complexation of the Cr(VI) ion with 1,5-diphenylcarbazide, and spectrometric measurement of the violet chromium diphenylcarbazone complex at 540 nm. However, there are notable specific differences within the sample preparation procedures used in three methods. To assess the comparability of the three measurement protocols, a total of 20 side-by-side air samples were collected, equally divided between a chromic acid electroplating operation and a spray paint operation where water soluble forms of Cr(VI) were used. A range of Cr(VI) concentrations from 0.6 to 960 microg m(-3), with Cr(VI) mass loadings ranging from 0.4 to 32 microg, was measured at the two operations. The equivalence of the means of the log-transformed Cr(VI) concentrations obtained from the different analytical methods was compared. Based on analysis of variance (ANOVA) results, no statistically significant differences were observed between mean values measured using each of the three methods. Small but statistically significant differences were observed between results obtained from performance evaluation samples for the NIOSH field method and the OSHA laboratory method.     

Environmental applications of poly(amic acid)-based nanomaterials

Nanoscale materials offer new possibilities for the development of novel remediation and environmental monitoring technologies. Different nanoscale materials have been exploited for preventing environmental degradation and pollutant transformation. However, the rapid self-aggregation of nanoparticles or their association with suspended solids or sediments where they could bioaccumulate supports the need for polymeric coatings to improve mobility, allows faster site cleanups and reduces remediation cost. The ideal material must be able to coordinate different nanomaterials functionalities and exhibit the potential for reusability. We hereby describe two novel environmental applications of nanostructured poly (amic acid)-based (nPAA) materials. In the first application, nPAA was used as both reductant and stabilizer during the in situ chemical reduction of chromium(vi) to chromium(iii). Results showed that Cr(vi) species were rapidly reduced within the concentration range of 10(-1) to 10(2) mM with efficiency of 99.9% at 40 °C in water samples and 90% at 40 °C in soil samples respectively. Furthermore, the presence of PdNPs on the PAA-Au electrode was found to significantly enhance the rate of reduction. In the second application, nPAA membranes were tested as filters to capture, isolate and detect nanosilver. Preliminary results demonstrate the capability of the nPAA membranes to quantitatively capture nanoparticles from suspension and quantify their abundance on the membranes. Silver nanoparticles detection at concentrations near the toxic threshold of silver was also demonstrated.     

Fast simultaneous determination of traces of Cu(II) and Co(II) in soils and sediments with the luminol/perborate chemiluminescent system

A flow injection analysis method based on ion chromatography and luminol chemiluminescence detection was used for the simultaneous determination of copper (II) and cobalt (II) trace levels in soils and sediments following microwave-assisted acid digestion. Detection was based on chemiluminescence (CL) of the luminol–perborate system in an alkaline medium, which is catalyzed by both transition metals. The concentration and pH of the eluent (oxalic acid) was found to affect CL intensities and retention times, both of which were inversely proportional to the oxalic acid concentration. The calibration curves for both metal ions were linear and allowed a limit of detection of 0.003 μg l^?1 for cobalt (II) and 0.014 μg l^?1 for cooper (II) to be calculated. The proposed method was successfully used to determine both metal ions in certified reference materials of stream and river sediments and soil samples. Based on the results, the determination is free of interferences from the usual concomitant ions.     

ASD-ICP-AES联用快速测定土壤中部分重金属

采用样品全自动消解系统(Automated Sample Digestion)对土壤样品进行前处理,采用ICP-AES对土样中的重金属元素一次性测定.通过优化实验,获得土壤中各种重金属的最佳消解条件.结果表明,经优化的消解程序A1能够快速、稳定消解土壤样品,并获得理想测试结果.经检验,ASD-ICP-AES联用的土样测...     

Study on the law of heavy metal leaching in municipal solid waste landfill

Comparative leaching experiments were carried out using leaching medium with different pH to municipal solid waste in the landfill columns in order to investigate the mobility of heavy metals. The leachate pH and oxidation–reduction potential were measured by oxidation–reduction potential analyzer; the contents of heavy metals were measured by inductively coupled plasma mass spectrometry. It is very different in leaching concentrations of heavy metals; the dynamic leaching of heavy metals decreased with the rise of the leaching amount on the whole. Acid leaching medium had definite influence on the leaching of heavy metals in the early landfill, but it had the obvious inhibition effect on the leaching in the middle and late period of landfill; the neutral and alkaline leaching medium are more beneficial to the leaching of heavy metals. Due to the influence of the environment of landfill, the differences of the results in cumulative leaching amount, leaching rate, and leaching intensity of heavy metals are very big. The calculation results of the release rates of heavy metals prove that the orders of the release rates are not identical under different leaching conditions. Acid rain made heavy metals migrate from municipal solid waste to soil and detain in soil more easily; approached neutral and alkaline leaching mediums are more beneficial to leaching of heavy metals in the municipal solid waste and soil with leachate. The field verification of experimental data showed that the law of heavy metal leaching in municipal solid waste revealed by the experiment has a good consistency with the data obtained by municipal solid waste landfill.     

全自动石墨消解-原子荧光法测定土壤总汞

采用全自动石墨消解-原子荧光光度法对土壤总汞进行测定,确定最佳消解时间为1 h,消解液最佳用量为8.0 m L。方法在总汞质量浓度为0.2~2.0μg/L范围内具有良好的线性,相关系数为0.999 9,当取样量为0.500 0 g时,检出限为0.002 mg/kg;测定不同标准土壤样品总汞的结果均在保证值范围内,精密度为4.0%~7.0%,加标回收率为95.0%~108.5%;对甘肃省实际土壤及沉积物样品测定进一步验证了方法的适用性。该法适合大批量样品分析,对于提高工作效率有重要意义。     

微波消解-氢化物发生原子荧光光度法 测定土壤中的砷

建立了微波消解一氢化物发生原子荧光光度法测定土壤中砷的方法。对微波消解条件进行了优化，用5mL硝酸和2mL过氧化氢的混合酸作消解溶剂，在设定的微波条件下砷提取完全。用5％的盐酸作为反应载流，12g／L硼氢化钾与0．5％氢氧化钠的混合液为还原剂，直接定容后应用HG．AFS测定，并通过测定国家标准参考物质和加标回收实验，对方法进行了验证。实际土壤加标同收率97％～103％。