A framework to assess regional environmental impacts of dedicated energy crop production

Numerous studies have evaluated air quality and greenhouse gas mitigation benefits of biomass energy systems, but the potential environmental impacts associated with large-scale changes in land-use patterns needed to produce energy crops have not been quantified. This paper presents a framework to assess the potential soil, water, and biodiversity impacts that may result from the large-scale production of dedicated energy crops. The framework incorporates producer economic decision models with environmental models to assess changes in land use patterns and to quantify the consequent environmental impacts. Economic and policy issues that will affect decisions to produce energy crops are discussed. The framework is used to evaluate erosion and chemical runoff in two Tennessee regions. The analysis shows that production of dedicated energy crops in place of conventional crops will significantly reduce erosion and chemical runoff.     

A multi-criteria framework to assess the sustainability of renewable energy development in the Alps

A multi-criteria analysis (MCA) was implemented to assess the best solutions for enhancing the production of renewable energy in the Alps. A set of criteria were selected based on the impacts of four renewable energy sources (forest biomass, hydropower, ground solar photovoltaic and wind power) on the three spheres of sustainability (environmental, social and economic). Three different scenarios are presented, each with a different set of weights for the criteria: the first scenario considers equally all three aspects of sustainability; the second scenario foresees an environmentally-oriented perspective, while the third scenario is more focused on the socio-economic aspects related to the development of renewable energy. Results show that forest biomass and hydropower seem to be the most viable solutions for enhancing the share of renewable energy in the Alps. Ground solar photovoltaic and wind power, on the other hand, seem to be less attractive alternatives due to their high impacts on land use.     

Linking climate policy across economic sectors: A case for green growth in Nepal

While the energy sector is the largest global contributor to greenhouse gas (GHG) emissions, the agriculture, forestry, and other land use (AFOLU) sector account for up to 80% of GHG emissions in the least developed countries (LDCs). Despite this, the nationally determined contributions (NDCs) of LDCs, including Nepal, focus primarily on climate mitigation in the energy sector. This paper introduces green growth—a way to foster economic growth while ensuring access to resources and environmental services—as an approach to improving climate policy coherence across sectors. Using Nepal as a case country, this study models the anticipated changes in resource use and GHG emissions between 2015 and 2030, that would result from implementing climate mitigation actions in Nepal's NDC. The model uses four different scenarios. They link NDC and policies across economic sectors and offer policy insights regarding (1) energy losses that could cost up to 10% of gross domestic product (GDP) by 2030, (2) protection of forest resources by reducing the use of biomass fuels from 465 million gigajoules (GJ) in 2015 to 195 million GJ in 2030, and (3) a significant reduction in GHG emissions by 2030 relative to the business-as-usual (BAU) case by greater use of electricity from hydropower rather than biomass. These policy insights are significant for Nepal and other LDCs as they seek an energy transition towards using more renewable energy and electricity.     

Women and energy resources management

Women need access to energy resources in order to meet their basic needs for food, shelter, clean water, health care and employment and to improve their family's living conditions. Due to population growth and economic development the demand for the main energy sources in low-income rural areas, biomass, is far greater than the supply, and women have no choice but to overexploit the increasingly scarce resources just to survive. Improvements in energy efficiency and an increased use of renewable energy sources could help women to balance their immediate livelihood needs and the long-term ecological needs. However, women generally lack access to these improved energy technologies. This article explores the causes of women's limited access to improved energy technologies and why energy polices and programmes often fail to address women's specific needs and concerns. Strategies of the United Nations Development Fund for Women (UNIFEM) are outlined as examples of approaches aiming at improving women's access to information and sustainable technologies and promoting women's full participation in environmental decision and policy making.     

Allocation solutions for secondary material production and end of life recovery: Proposals for product policy initiatives

This paper aims at analysing how secondary materials production and end of life recovery processes are modelled in life cycle-based environmental assessment methods in order to discuss their suitability in product policy-support contexts, with a focus on Sustainable Consumption and Production (SCP) policies. The equations prescribed in three published, widely recognised standards are evaluated. In addition, more recent modelling approaches that have been adopted in the context of two EU product policy initiatives (the Product Environmental Footprint (PEF) and the Resource Efficiency Assessment of Products (REAPro)) are similarly analysed. All of the methods are scrutinised against eight criteria which we deem to be important in product policy-support contexts, including comprehensiveness, accommodation of open-loop and closed-loop product systems, and consideration of recyclability/recoverability rates, to name a few. Based on this analysis, it is suggested that the PEF and REAPro modelling approaches appear to be better suited for use in product policy-support contexts than do the currently widely endorsed methods that we considered.     

Life cycle assessment of biofibres replacing glass fibres as reinforcement in plastics

This article aims to determine the environmental performance of China reed fibre used as a substitute for glass fibre as reinforcement in plastics and to identify key environmental parameters. A life cycle assessment (LCA) is performed on these two materials for an application to plastic transport pallets. Transport pallets reinforced with China reed fibre prove to be ecologically advantageous if they have a minimal lifetime of 3 years compared with the 5-year lifetime of the conventional pallet. The energy consumption and other environmental impacts are strongly reduced by the use of raw renewable fibres, due to three important factors: (a) the substitution of glass fibre production by the natural fibre production; (b) the indirect reduction in the use of polypropylene linked to the higher proportion of China reed fibre used and (c) the reduced pallet weight, which reduces fuel consumption during transport. Considering the whole life cycle, the polypropylene production process and the transport cause the strongest environmental impacts during the use phase of the life cycle. Since thermoplastic composites are hardly biodegradable, incineration has to be preferred to discharge on landfills at the end of its useful life cycle. The potential advantages of the renewable fibres will be effective only if a purer fibre extraction is obtained to ensure an optimal material stiffness, a topic for further research. China reed biofibres are finally compared with other usages of biomass, biomaterials, in general, can enable a three to ten times more efficient valorisation of biomass than mere heat production or biofuels for transport.     

Environmental sub models for a macroeconomic model: agricultural contribution to climate change and acidification in Denmark

Integrated modelling of the interaction between environmental pressure and economic development is a useful tool to evaluate environmental consequences of policy initiatives. However, the usefulness of such models is often restricted by the fact that these models only include a limited set of environmental impacts, which are often energy-related emissions. In order to evaluate the development in the overall environmental pressure correctly, these model systems must be extended. In this article an integrated macroeconomic model system of the Danish economy with environmental modules of energy related emissions is extended to include the agricultural contribution to climate change and acidification. Next to the energy sector, the agricultural sector is the most important contributor to these environmental themes and subsequently the extended model complex calculates more than 99% of the contribution to both climate change and acidification. Environmental sub-models are developed for agriculture-related emissions of CH(4), N(2)O and NH(3). Agricultural emission sources related to the production specific activity variables are mapped and emission dependent parameters are identified in order to calculate emission coefficients. The emission coefficients are linked to the economic activity variables of the Danish agricultural production. The model system is demonstrated by projections of agriculture-related emissions in Denmark under two alternative sets of assumptions: a baseline projection of the general economic development and a policy scenario for changes in the husbandry sector within the agricultural sector.     

The effect of clean energy regulations and incentives on green jobs: panel analysis of the United States, 1998–2007

‘Green jobs’ are often presented as a simultaneous solution for the economic downturn and the environmental crisis, particularly as they relate to sustainable development in energy and climate change. Federal, state, and municipal authorities have employed a variety of policy tools to boost job creation within their jurisdictions. This study focuses on the role that state policies play in creating green jobs. It examines two generic policy tools – regulations and incentives – each of which can be aimed at advancing energy efficiency or renewable energy production, and assesses the relative impact they have had on generating green jobs. In order to measure this impact, we utilize panel data compiled by the Pew Charitable Trusts, which contain a state‐level count of green jobs from 1998 to 2007. The results of the analysis suggest that regulations, particularly those that mandate action on renewable energy, are likely to increase the number of private sector green jobs in states. Regulations with clear guidelines and targets tend to reduce uncertainty in business, and can lead to increased private sector investment and job availability. This study provides practical lessons regarding the type and design of policy instruments and regulations on renewable energy, which effectively encourage green job growth.     

Toward energy and livelihoods security in Africa: Smallholder production and processing of bioenergy as a strategy

The past few years have seen a phenomenal rise in the production and consumption of biofuels and biodiesel at the global level. This development is of special significance to Africa, where about 550 million people (75% of the total population in Sub‐Saharan Africa) depend on traditional biomass (wood, charcoal, cow dung, etc.) and lack access to electricity or any kind of modern energy service. Derived from plants and agricultural crops, biofuels and biodiesel represent modern forms of bioenergy and more efficient use of biomass energy. Beyond efficiency, modern bioenergy offers tremendous opportunities to meet growing household energy demands, increase income, reduce poverty, and mitigate environmental degradation. In the African setting, energy and livelihoods security are indeed inseparable. This paper argues economic, social, and environmental benefits of modern bioenergy can be realized through a strategy that centres on smallholder production and processing schemes and pursuit of a livelihood approach to energy development. Such a scheme opens up new domestic markets, generates new cash incomes, improves social wellbeing, enhances new technology adoption, and lays the ground for rural economic transformation and sustainable land use. The paper concludes by underlining the vital importance of considering sound property rights and strategic planning of sustainable development as tools for sustainable energy and livelihoods security.     

Causal interactions between environmental degradation,renewable energy,nuclear energy and real GDP: a dynamic panel data approach

Renewable energy as well as nuclear energy are low carbon power that presents the life cycle emissions of greenhouse gases than fossil fuel energy. However, analyzing the relationship between the consumption of renewable energy, consumption of nuclear energy, CO₂ emissions and economic growth is crucial for the economic and energy policy decision; we address this question for developed countries. This paper deals with the relationships between nuclear energy, environmental degradation, real GDP and renewable energy. We apply a panel data model for a global panel consisting of nine developed countries during the period 1990–2013. The group studied consists of Canada, France, Japan, Netherlands, Spain, Sweden, Switzerland, UK and the USA. The empirical findings suggest that: (1) a causal link between emissions and real income, (2) a unidirectional causality running from renewable energy to nuclear energy, (3) a unidirectional causal relationship running from capital to environmental degradation, (4) a unidirectional causal relationship running from income to nuclear energy consumption, since the growth hypothesis is valid, (5) a unidirectional causality running from capital to income, (6) no an outstanding role of renewable energy use in the contribution of CO₂ emissions.     

Indicators for sustainable energy development in Mexico

This article presents a summary of a study on the application to the Mexican energy sector of a core set of indicators for sustainable energy development (ISED), developed by the International Atomic Energy Agency (IAEA). The study focused on the elaboration of socio‐economic and environmental indicators related to energy production and use, and was aimed at assessing Mexico's existing energy policies and identifying strategies and possible policies that could bring about improvements in major priority areas: energy intensity, atmospheric emissions, energy import dependency and use of renewables. While positive trends have been observed in relation to energy intensity and atmospheric emissions, Mexico is becoming more dependent on imports of gasoline, natural gas and other high‐value secondary energy sources, while exporting significant amounts of primary fuels, such as crude oil. Also, no significant increase has been observed in the use of renewable sources of energy. Social, economic and environmental policies need to be formulated for the energy sector and related investments (public and private) reinforced so that all economic sectors have access to energy from cleaner and more diverse sources.     

Basis of energy crop selection for biofuel production: Cellulose vs. lignin

This paper investigates the suitability of Jerusalem artichoke (Helianthus tuberosus L.), fiber hemp (Cannabis sativa L.), energy sunflower (Helianthus annuus L.), Amur silver-grass (Miscanthus sacchariflorus), and energy grass cultivar (cv) Szarvasi-1 for biofuel production in Northern climatic conditions. Above ground biomass, bioethanol production yield, and methane production yield are used as indicators to assess the bio-energy potential of the culture. Results presented show that energy crops of Southern origin produce 30–70% less biomass than in the origin region. Nonetheless, both perennial and annual energy crops produce high above ground biomass yields (660–1280 g m^–2) for Northern climatic conditions. Experimental results show that bioethanol yield is dependent on cellulose content of the biomass. The higher the cellulose content, the higher the bioethanol yield. The biogas production on the other hand, depends on lignin content. The lower the lignin content the higher the biogas yield. Therefore, the selection of the energy crop for bioethanol production should be based on high cellulose content, while for biogas production it should rather be based on the low lignin content.     

A panel study on the relationship between biofuels production and sustainable development

Biomass is one of the renewable energy sources on which policy makers are greatly dependent on since it is a flexible feedstock capable of conversion into electricity, transport liquid fuels and heat by chemical and biological processes on demand. Though numerous publications have examined the relationship of economic growth with renewable energy and other parameters, biomass energy has never been included in these studies. Then, this study examines the causal relationship within a multivariate panel cointegration/error correction framework which combines the cross-section and time series data while allowing for heterogeneity across different provinces. After employing panel data regression model ranging from 2003 through 2012 to examine the relationships of biofuels production with sustainable development in China, the paper concludes that the development of biofuel energy production integrated with the consideration of the improvement of income per capita, and the attraction of more capital investment, does make a significant contribution to economic growth. However, some negative side effects including the increase of greenhouse emissions and the decrease of marginal land still coexist with the economic development. Of course, the importance of these findings lies on their implications and their adoption on strategic policies.     

The transatlantic rift in genetically modified food policy

The regulatory structures underlying United States and European Union policies regarding genetically modified (GM) food and crops are fundamentally different. The US regulates GM foods and crops as end products, applying roughly the same regulatory framework that it does to non GM foods or crops. The EU, on the other hand, regulates products of agricultural biotechnology as the result of a specific production process. Accordingly, it has developed a network of rules that regulate GM foods and crops specifically. As a result, US regulation of GM foods and crops is relatively permissive, whereas EU regulation is relatively restrictive. Why are genetically modified food policies in the United States and the European Union so strikingly different? In the light of the recent World Trade Organization dispute on agricultural biotechnology, it may seem that economic interests are the driving force behind policies. While they are certainly part of the picture, the issue is far more complex. This paper argues that three different elements help explain differences between US and EU GM food policies. First, an investigation of US and European policies of the 1970s and 1980s on recombinant DNA research and of events leading up to early GM food and crop regulation allows a deeper understanding of current policy. Second, scrutinizing underlying values and norms can uncover the beliefs that condition current GM food and crop policy. Third, an analysis of involved actors’ views and levels of success in influencing policy is essential to understanding US and EU policies.     

Fuel poverty and vulnerability in the EU low-carbon transition: the case of renewable electricity

The European Union (EU) and member states alike are following a tradition of addressing fuel poverty and vulnerability at the point of purchase by final consumers by seeking to influence the impact of income, energy price and the built environment on the ability of household consumers to access the energy that they need. By focusing on the conditions of energy transmission in the most rapidly growing renewable electricity sector in the UK – offshore wind – this paper aims to question whether the regulatory socio-technological framing of renewable electricity transmission is reproducing conditions for fuel poverty and vulnerability in the UK. By drawing a comparison with renewable electricity transmission in Bulgaria, this paper argues that the problem might be symptomatic of the EU as a whole. While not arguing against the proliferation of renewable electricity and its importance in meeting the 2020 targets, this paper calls for expanding the scope of fuel poverty alleviation policy throughout the whole renewable electricity supply chain, building on Helm's argument that energy companies at the middle of the supply chain are better suited to deliver fuel policy.     

Environmental policy stringency,renewable energy consumption and CO2 emissions: Panel cointegration analysis for BRIICTS countries

ABSTRACT

The aim of this paper is to investigate the relationship between environmental policy stringency and CO₂ emissions in BRIICTS (Brazil, Russia, India, Indonesia, China, Turkey and South Africa) for the period 1993–2014 after controlling for renewable energy, fossil energy, oil prices and income. We believe that this is the first attempt to use the recently OECD-developed environmental policy stringency index to test the effectiveness of environmental stringency policy in reducing CO₂ emission in these countries. Applying the Panel Pooled Mean Group Autoregressive Distributive Lag (PMG-ARDL) estimator, we found an inverted U–shaped relationship between environmental policy stringency and CO₂ emissions. This suggests that initially strict stringent environmental policy does not lead to improvements in the environment but after a certain level or a threshold point, environmental stringency policy leads to improvement in environmental quality. Renewable energy consumption was negatively related to CO₂ emissions while fossil energy consumption and real oil prices and income were positively and significantly related to CO₂. Our findings suggest that strengthening the stringency of environmental policies and promoting renewable energy are effective ways of preventing environmental degradation in BRIICTS countries.     

U.S. Electric Utilities and Renewable Energy: Drivers for Adoption

Renewable energy can address rising demand for energy, environmental protection, energy security, and job creation. This paper assesses resource, economic, social, and political drivers for the adoption of renewable energy. Analysis of the data collected from over 100 interviews with utility managers reveals that production tax credits significantly influence the percent of renewable energy in a utility's portfolio. The availability of renewable energy resources, economic drivers, social influences, and political drivers such as renewable portfolio standards and government grants are not significant drivers. Understanding these drivers can help electric utilities, governments, and other stakeholders with their efforts to reap the benefits of renewable energy.     

Environmental and economic aspects of production and utilization of RDF as alternative fuel in cement plants: A case study of Metro Vancouver Waste Management

Municipal solid waste (MSW) disposal and management is one of the most significant challenges faced by urban communities around the world. Municipal solid waste management (MSWM) over the years has utilized many sophisticated technologies and smart strategies. Municipalities worldwide have pursued numerous initiatives to reduce the environmental burden of the MSW treatment strategies. One of the most beneficial MSWM strategies is the thermal treatment or energy recovery to obtain cleaner renewable energy from waste. Among many waste-to-energy strategies, refuse-derived fuel (RDF) is a solid recovered fuel that can be used as a substitute for conventional fossil fuel. The scope of this study is to investigate the feasibility of RDF production with MSW generated in Metro Vancouver, for co-processing in two cement kilns in the region. This study investigates environmental impacts and benefits and economic costs and profits of RDF production. In addition, RDF utilization as an alternative fuel in cement kilns has been assessed. Cement manufacturing has been selected as one of the most environmentally challenged industries and as a potential destination for RDF to replace a portion of conventional fossil fuels with less energy-intensive fuel. A comprehensive environmental assessment is conducted using a life cycle assessment (LCA) approach. In addition, cost–benefit analysis (CBA) has been carried out to study the economic factors. This research confirmed that RDF production and use in cement kilns can be environmentally and economically viable solution for Metro Vancouver.     

New Models for Implementation Theory: Striking a Consensus on Windfarms

The UK Government has provided financial support to developing renewable technologies through the Non-fossil Fu el Obligation imposed on the regional electricity companies. Several hundred renewable energy schemes have come forward to be assessed for their environmental suitability by local level regulators in a very poorly developed national policy framework. This study examines the development control decisions on windfarm applications since 1983 by the largest district council in Wales, and seeks to highlight the role played by clusters of public and private organizations in policy and programme implementation. With the multiple and sometimes conflicting objectives advanced by these organizations, it was in the interests of the district council to strike a negotiated consen sus between landscape conservation and inward investment concerns. The case study shows the crucial importan ce of the socio-political context for understanding the dynamics of policy making.     

Large-scale utilization of biomass energy and carbon dioxide capture and storage in the transport and electricity sectors under stringent CO2 concentration limit scenarios

Large-scale, dedicated commercial biomass energy systems are a potentially large contributor to meeting global climate policy targets by the end of the century. We use an integrated assessment model of energy and agriculture systems to show that, given a climate policy in which terrestrial carbon is appropriately valued equally with carbon emitted from the energy system, biomass energy has the potential to be a major component of achieving these low concentration targets. A key aspect of the research presented here is that the costs of processing and transporting biomass energy at much larger scales than current experience are explicitly incorporated into the modeling. From the scenario results, 120–160 EJ/year of biomass energy is produced globally by midcentury and 200–250 EJ/year by the end of this century. In the first half of the century, much of this biomass is from agricultural and forest residues, but after 2050 dedicated cellulosic biomass crops become the majority source, along with growing utilization of waste-to-energy. The ability to draw on a diverse set of biomass-based feedstocks helps to reduce the pressure for drastic large-scale changes in land use and the attendant environmental, ecological, and economic consequences those changes would unleash. In terms of the conversion of bioenergy feedstocks into value added energy, this paper demonstrates that biomass is and will continue to be used to generate electricity as well as liquid transportation fuels. A particular focus of this paper is to show how climate policies and technology assumptions – especially the availability of carbon dioxide capture and storage (CCS) technologies – affect the decisions made about where the biomass is used in the energy system. The potential for net-negative electric sector emissions through the use of CCS with biomass feedstocks provides an attractive part of the solution for meeting stringent emissions constraints; we find that at carbon prices above $150/tCO₂, over 90% of biomass in the energy system is used in combination with CCS. Despite the higher technology costs of CCS, it is a very important tool in controlling the cost of meeting a target, offsetting the venting of CO₂ from sectors of the energy system that may be more expensive to mitigate, such as oil use in transportation. CCS is also used heavily with other fuels such as coal and natural gas, and by 2095 a total of 1530 GtCO₂ has been stored in deep geologic reservoirs. The paper also discusses the role of cellulosic ethanol and Fischer–Tropsch biomass derived transportation fuels as two representative conversion processes and shows that both technologies may be important contributors to liquid fuels production, with unique costs and emissions characteristics.