Evaluation of Mass-Transfer Coefficient of Free Fall – Cascade-Aerator

The mass-transfer coefficient of a free-fall cascade-aeratorunit of 15 million litres per day was evaluated for its efficiency in the removal of a class of volatile organics, the trihalomethanes(THMs). These compounds are carcinogenic and occur as a resultof chlorination of natural waters. Due to the volatile nature ofthe THMs, the efficiency of aeration as a potential techniquefor their removal has been studied. The principle behindaeration is gas-transfer, according to which the gas-liquidinterface is hypothesized to consist of a gas and liquid filmthrough which gas is transferred by molecular diffusion untilequilibrium is attained. The overall mass transfer coefficient(K _L) of the aerator considering oxygen as the reference compound, was found to be29.3 hr^-1 for THMs.     

Evaluation of environmental impacts of Integrated Industrial Estate��Pantnagar through application of air and water quality indices

Large-scale industrialization, population inflow, and rapid urbanization coupled with unfavorable meteorological conditions often induce significant degradation of urban environment. In order to assess the extent of environmental impacts due to establishment of the Integrated Industrial Estate??Pantnagar (IIE-Pantnagar), ambient air and groundwater were monitored from June 2007 to May 2008. Collected baseline information was normalized and interpreted with the application of air (AQI) and water quality indices (WQI). Among the pre-identified air pollutants, suspended particulate matter was found to be the principal culprit to deteriorate ambient air quality, with a maximum annual concentration of 418.5 ??g/m³. Monthly average concentrations of respirable particulate matter (aerodynamic diameter < 10 ??m) also persist at a critical level with an annual maximum of 207.3 ??g/m³. A segmented linear function with maximum operator concept was used to compute AQI, and the developed index was found well suitable to demonstrate temporal variations of ambient air quality. The computed AQI value for the selected study region varied from moderate (97.0) to very poor pollution level (309.2) in respect to developed air quality standards. Furthermore, an integrated WQI was developed comprising 9 parameters, and among all the 10 pre-identified locations, the average groundwater quality was found acceptable in terms of Indian drinking water standards. The maximum WQI (70.6) was found at the Kichha Railway Station during summer months, revealing moderate pollution load. Industrial discharge from IIE-Pantnagar coupled with other industrial setup may hold responsible for such kind of degradation of water quality. In contrast, WQI computed at Rudrapur City demonstrate minimum (15.0?C22.1) pollution load. For 95% of the monitoring period, the computed WQI was found acceptable for all selected locations with few exceptions. The application of WQI to assess temporal variations in groundwater quality was therefore found satisfactory.     

“Emission game”: some applications of the theory of games to the problem of CO2 emission

If there are no doubts that we must reduce the total emission of carbon dioxide, then the problem of how much different countries should be allowed to contribute to this amount remains a serious one. We suggest this problem to be considered as a non-antagonistic game (in Germeier's sense). A game of this kind is called an “emission game”. Suppose that there are n independent actors (countries or regions), each of them releasing a certain amount of CO₂ per year (in carbon units) into the atmosphere, and that the emission would be reduced by each actor. Each actor has his own aim: to minimise the loss in the Gross Domestic Product (GDP) caused by the reduction of emissions. On the other hand, taking into account that it is impossible to estimate more or less precisely the impact of the climate change on GDP for each country today, a common strategy will be to reduce the climate change. Since one of the main leading factors in global warming is the greenhouse effect, then the common aim will be to reduce the sum of emissions. This is a typical conflict situation. How to resolve it? We can weigh the “egoistic” and “altruistic” criteria for each actor introducing the so-called “coefficients of egoism”. This coefficient is very large, if the actor uses a very egoistic strategy, and conversely, if the actor is a “super-altruist”, then the corresponding coefficient is very small. Using these coefficients we get the general solution of the game in a form of some Pareto's equilibrium. The solution is stable and efficient.     

Numerical Modeling of Flow Fields and Dispersion of Passive Pollutants in the Vicinity of the Temelín Nuclear Power Plant

This study deals with numerical simulation of flow fields and dispersion of model passive admixtures in the planetary boundary layer in a 10 × 10 km square area, centered on the Czech Republic’s Temelín Nuclear Power Plant. Numerical calculations of three-dimensional flow fields with eight basic wind directions given for the inlet boundary of the computational domain are performed using the FLUENT CFD code with the standard k – ε turbulence model. The resultant modeling of the flow fields provides information as to probable local directions and velocities of flow vectors on a horizontal scale of 100 m, which are consistent with the data given for the boundaries of the calculation area in the framework of a scale of 10 km. The modeled flow fields generate the input data for related Lagrangian simulation of the ground concentration and deposition fields of passive particles assumedly emitted at the site of the Temelín plant. Simulated plumes describe eight cases of potential ground-level distribution of model passive admixtures in the area.     

Status of Heavy Metals in Water and Bed Sediments of River Gomti – A Tributary of the Ganga River, India

The concentrations of cadmium, chromium, copper, iron, lead, manganese, nickel, and zinc in water and bed sediments of river Gomti have been studied in a fairly long stretch of 500 km from Neemsar to Jaunpur. Grab samples of water (October 2002–March 2003) and bed sediments (December 2002 and March 2003) were collected from 10 different locations following the standard methods. The river water and sediment samples were processed and analyzed for heavy metals viz., Cd, Cr, Cu, Fe, Pb, Mn, Ni, and Zn, and using ICP-AES. The heavy metals found in the river water were in the range: Cd (0.0001–0.0005 mg/L); Cr (0.0015–0.0688 mg/L); Cu (0.0013–0.0.0043 mg/L); Fe (0.0791–0.3190 mg/L); Mn (0.0038–0.0.0973 mg/L); Ni (0.0066–0.011 mg/L); Pb (0.0158–0.0276 mg/L); and Zn (0.0144–0.0298 mg/L) respectively. In the sediments the same were found in the range: Cd (0.70–7.90 g/g); Cr (6.105–20.595 g/g); Cu (3.735–35.68 g/g); Fe (5051.485–8291.485 g/g); Mn (134.915–320.45 g/g); Ni (13.905–37.370 g/g); Pb (21.25–92.15 g/g); and Zn (15.72–99.35 g/g) of dry weight respectively. Some physico-chemical parameters viz., pH, total solids, total dissolved solids, total suspended solids, dissolved oxygen, biological oxygen demand, chemical oxygen demand, hardness etc. were estimated as these have direct or indirect influence on the incidence, transport and speciation of the heavy metals. Based on the geoaccumulation indices, the Gomti river sediments from Neemsar to Jaunpur are considered to be unpolluted with respect to Cr, Cu, Fe, Mn, and Zn. It is unpolluted to moderately polluted with Pb. In case of Cd it varies from moderately polluted to highly polluted. As far as Ni is concerned the sediment is very highly polluted at Barabanki and Jaunpur D/s. No correlation was found between enrichment factor and geoaccumulation index.     

Monitoring the quality of groundwater on the bank of Uyyakondan channel of river Cauvery at Tiruchirappalli, Tamil Nadu??India

The groundwater quality on the banks of Uyyakondan channel of Cauvery at Tiruchirappalli was studied. Two groundwater samples were taken near the bank of the channel on both sides and the other two samples were taken nearly 0.5 km away from the channel at ten stations. The study was carried out every year over a period of 3 years from December 2001-December 2003. The samples were subjected to physico-chemical analysis. The results showed that most of the physico-chemical parameters were in higher concentrations at most of the groundwater stations.     

Determination of Fish Community Composition in the Untempered Regions of a Thermal Effluent Canal – The Efficacy of a Fixed Underwater Videography System

High flows and deep waters associated with thermal dischargecanals invoke safety concerns and preclude the use of conventional fish sampling methodologies. Despite these challenges, it is critical that assessments of thermal effectsfrom power generation do not rely solely on data collected in the plume, but also focus on fish living in the canal, particularly in regions above the zone of tempering influence. We deployed a fixed underwater videography apparatus to monitor the community composition and abundance patterns of fish in the Nanticoke thermal generating discharge canal on the north shore of Lake Erie from February 1, 1999 until July 31, 1999. We also compared the number of species observed using video to angling surveys, visual observations through the air/water interface and two modified netting procedures. Our results indicate that videography permitted the detectionof the most species and the highest number of individuals. Variable visibility was the largest limitation of this approach. The addition of infrared lighting for low light conditions and a series of cameras positioned at several depths would be a cost effective, safe, and efficient method ofassessing community structure and behaviour of fish in thermal discharge canals.     

Modelling of a Capillary Rise Height of Biochar by Modified Lucas–Washburn Equation

Environmental Modeling & Assessment - Lucas–Washburn equation is a fundamental expression which is used to describe capillary rise in porous materials according to average pore radius,...     

A methodology for rapid assessment of the environmental status of the shallow aquifer of ��Tavoliere di Puglia�� (Southern Italy)

Anticipating the European Water Framework Directive (2000/60/EC), the Italian Government issued Legislative Decree n.152/99 which sets out rules for classifying the environmental status of national water bodies in order to achieve specific qualitative objectives by 2016. The most recent European Groundwater Directive (2006/118/EC), which was only recognized by Italy in early 2009 (Legislative Decree 30/09), requires such resources to be characterized from a qualitative standpoint and the risk of their being polluted by individual pollutants or groups of pollutants to be evaluated. This paper reports a simple methodology, based on easy-to-apply rules, for the rapid classification of groundwater, and the results of its application to the shallow aquifer of the plain of Tavoliere delle Puglie located in south Italy. Data collected during well-water monitoring campaigns carried out from 2002 to 2003 made it possible to assess the environmental status of the Tavoliere which, unfortunately, was found to be characterized by ??significant anthropic pressures on quality and/or quantity of groundwater and necessitating specific improvement actions??.     

Benefits of Bt cotton counterbalanced by secondary pests? Perceptions of ecological change in China

In the past, scientific research has predicted a decrease in the effectiveness of Bt cotton due to the rise of secondary and other sucking pests. It is suspected that once the primary pest is brought under control, secondary pests have a chance to emerge due to the lower pesticide applications in Bt cotton cultivars. Studies on this phenomenon are scarce. This article furnishes empirical evidence that farmers in China perceive a substantial increase in secondary pests after the introduction of Bt cotton. The research is based on a survey of 1,000 randomly selected farm households in five provinces in China. We found that the reduction in pesticide use in Bt cotton cultivars is significantly lower than that reported in research elsewhere. This is consistent with the hypothesis suggested by recent studies that more pesticide sprayings are needed over time to control emerging secondary pests, such as aphids, spider mites, and lygus bugs. Apart from farmers?? perceptions of secondary pests, we also assessed their basic knowledge of Bt cotton and their perceptions of Bt cotton in terms of its strengths and shortcomings (e.g., effectiveness, productivity, price, and pesticide use) in comparison with non-transgenic cotton.     

Debromination of 1,4-Dibromobenzene and 4,4′-Dibromobiphenyl: A Model for Cleansing of PCBs

The aim of this study is to develop a catalytic method which has advantages over current method to detoxify and degrade environmentally harmful polychlorinated biphenyls (PCBs). A variety of catalysts have been employed in a preliminary study on 1,4-dibromobenzene and 4,4-dibromobiphenyl which may be considered to represent simple analogues of PCBs. The most satisfactory catalysts are those involving [Pd(dppf)] [dppf = 1,1-bis(diphenylphosphino)ferrocene], generated in situ from PdCl2(dppf) or Pd(dppf)2. In the presence of the reducing reagent, namely NaBH4, debromination has been achieved at relative mild conditions with high product yields (> 70%). Thus, our results indicate the possibility of dechlorination of PCBs with such catalysts.     

Assessment of Mexico��s program to use ethanol as transportation fuel: impact of 6% ethanol-blended fuel on emissions of light-duty gasoline vehicles

Recently, the Mexican government launched a national program encouraging the blending of renewable fuels in engine fuel. To aid the assessment of the environmental consequences of this move, the effect of gasoline fuel additives, ethanol and methyl tert-butyl ether, on the tailpipe and the evaporative emissions of Mexico sold cars was investigated. Regulated exhaust and evaporative emissions, such as carbon monoxide, non-methane hydrocarbons, and nitrogen oxides, and 15 unregulated emissions were measured under various conditions on a set of 2005?C2008 model light-duty vehicles selected based on sales statistics for the Mexico City metropolitan area provided by car manufacturers. The selected car brands are also frequent in Canada, the USA, and other parts of the world. This paper provides details and results of the experiment that are essential for evaluation of changes in the emission inventory, originating in the low-blend ethanol addition in light vehicle fuel.     

The long time scales of the climate–economy feedback and the climatic cost of growth

This paper is based on the perception that the inertia of climate and socio-economic systems are key parameters in the climate change issue. In a first part, it develops and implements a new approach based on a simple integrated model with a particular focus on an innovative transient impact and adaptation modeling. In a second part, a climate–economy feedback is defined and characterized. The following results were found. 1) It has a long characteristic time, which lies between 50 and 100 years depending on the hypotheses; this time scale is long when compared to the system's other time scales, and the feedback cannot act as a natural damping process of climate change. 2) Mitigation has to be anticipated since the feedback of an emission reduction on the economy can be significant only after a 20-year delay and is really efficient only after at least 50 years. 3) Even discounted, production changes due to an action on emissions are significant over more than one century. 4) The methodology of the Intergovernmental Panel on Climate Change (IPCC), which neglects the feedback from impacts to emissions, is acceptable up to 2100, whatever is the level of impacts. This analysis allows also to define a climatic cost of growth as the additional climate change damages due to the additional emissions linked to economic growth.

Health impact assessment in spatial planning in England –types of application and quality of documentation

Health Impact Assessment (HIA) is a decision support approach which is applied in various shapes and forms throughout the world. In England, amongst a range of areas of application, HIA is applied in local (spatial) plan making and project development planning. Whilst various authors have reflected on HIA practice in England, the extent of application and its quality has remained unclear. This paper aims at addressing this gap by reporting on the results of a systematic review of HIA in planning. It is found that between 100 and 200 HIAs are likely being produced each year in England. Whilst most assessments are rapid (desk based), there are also examples of comprehensive and intermediate HIAs, where a participatory procedural approach is followed. An important finding is that those HIAs applied within the context of other assessments (integrated impact assessment -IIA, strategic environmental assessment - SEA/ sustainability appraisal -SA and environmental impact assessment – EIA) tend to be of a higher quality than standalone HIAs, mainly because of the existing comprehensive statutory procedural requirements for these other assessments into which HIA can be integrated.     

Effect of Humic Acid on the Bioavailability of γ-Hexachlorocyclohexane in Marsilea Minuta (L.)

Effect of various concentrations of humic acid (0.2 to 1%) on thebioavailability of -HCH in vegetative clones of theaquatic fern Marsilea minuta was studied in a staticexperimental bioassay system on different photoperiods. Additionof humic acid showed the reduction in the bioavailability of-HCH in all the photoperiods (72 hr light to 144 hrlight) at the interval of 16 hr light (L) and 8 hr dark (D) inboth aerial and submerged portion as compared to controlindicating its protective role in toxicity.     

A Preliminary Assessment of Montréal Process Indicators of Forest Fragmentation for the United States

As part of the U.S. 2003 National Report on Sustainable Forests, four metrics of forest fragmentation--patch size, edge amount, inter-patch distance, and patch contrast--were measured within 137744 non-overlapping 5625 ha analysis units on land-cover maps derived from satellite imagery for the 48 conterminous States. The perimeter of a typical forest patch is about 100 m from the perimeter of its nearest neighbor, except when there is not much forest, in which case that distance is 200 to 300 m. A typical analysis unit has from 10 to 40% as much forest edge as it could possibly have, given the amount of forest present. Most analysis units contain a large number of patches that are less than one hectare in size, and about 10% contain one or more 2000 to 5000 ha patches. Forest often defines the background landscape, and patch contrast is generally either very high or very low in eastern regions and intermediate in western regions. Many research needs were identified by this experimental analysis of available data and metrics.     

A Preliminary Assessment of the Montréal Process Indicators of Air Pollution for the United States

Air pollutants pose a risk to forest health and vitality in the United States. Here we present the major findings from a national scale air pollution assessment that is part of the United States' 2003 Report on Sustainable Forests. We examine trends and the percent forest subjected to specific levels of ozone and wet deposition of sulfate, nitrate, and ammonium. Results are reported by Resource Planning Act (RPA) reporting region and integrated by forest type using multivariate clustering. Estimates of sulfate deposition for forested areas had decreasing trends (1994-2000) across RPA regions that were statistically significant for North and South RPA regions. Nitrate deposition rates were relatively constant for the 1994 to 2000 period, but the South RPA region had a statistically decreasing trend. The North and South RPA regions experienced the highest ammonium deposition rates and showed slightly decreasing trends. Ozone concentrations were highest in portions of the Pacific Coast RPA region and relatively high across much of the South RPA region. Both the South and Rocky Mountain RPA regions had an increasing trend in ozone exposure. Ozone-induced foliar injury to sensitive species was recorded in all regions except for the Rocky Mountain region. The multivariate analysis showed that the oak-hickory and loblolly-shortleaf pine forest types were generally exposed to more air pollution than other forest types, and the redwood, western white pine, and larch forest types were generally exposed to less. These findings offer a new approach to national air pollution assessments and are intended to help focus research and planning initiatives related to air pollution and forest health.     

Leaching Characteristics of Fly Ash from Thermal Power Plants of Soma and Tunçbilek, Turkey

Use of lignite in power generation has led to increasing environmental problems associated not only with gaseous emissions but also with the disposal of ash residues. In particular, use of low quality coal with high ash content results in huge quantities of fly ash to be disposed of. The main problem related to fly ash disposal is the heavy metal content of the residue. In this regard, experimental results of numerous studies indicate that toxic trace metals may leach when fly ash contacts water. In this study, fly ash samples obtained from thermal power plants, namely Soma and Tunçbilek, located at the west part of Turkey, were subjected to toxicity tests such as European Committee for standardization (CEN) and toxicity characteristic leaching (TCLP) procedures of the U.S. Environmental Protection Agency (U.S. EPA). The geochemical composition of the tested ash samples from the power plant show variations depending on the coal burned in the plants. Furthermore, the CEN and TCLP extraction results showed variations such that the ash samples were classified as `toxic waste' based on TCLP result whereas they were classified as `non-toxic' wastes based on CEN results, indicating test results are pH dependent.     

Techniques of remote sensing applied to the environmental analysis of part of an aquifer located in the São José dos Campos Region sp,Brazil

The anthropogenic activity on the surface can modify and introduce new mechanisms of recharging the groundwatersystem, modifying the tax, the frequency and the quality ofrecharge of underground waters. The understanding of thesemechanisms and the correct evaluation of such modifications arefundamental in determining the vulnerability of groundwatercontamination. The groundwater flow of the South ParaíbaCompartment, in the region of São José dos Campos, São Paulo, is directly related to structural features of theTaubaté Basin and, therefore, the analysis of its behaviourenhances the understanding of tectonic structure. The methodologyadopted for this work consists in pre-processing and processing of the satellite images, visual interpretation of HSI products, field work and data integration. The derivation of the main structural features was based on visual analysis of the textureelements of drainage, and the relief in sedimentary and crystalline rocks. Statistical analysis of the feature densitiesand the metric-geometric relations between the analysed elementshave been conducted. The crystalline rocks, on which the sediments were laying, conditions and controls the structural arrangement of sedimentary formations. The formation of the SouthParaíba Grabén is associated with Cenozoic distensive movement which reactivated old features of crust weakness and generated previous cycles with normal characteristics. The environmental analysis is based on the integration of the existing methodology to characterise vulnerability of an universal pollutant and density fracture zone. The digital integration was processed using GIS (Geographic Information System) to delineate five defined vulnerability classes. The hydrogeological settings were analysed in each thematic map and,using fuzzy logic, an index for each different vulnerability class was compiled. Evidence maps could be combined in a seriesof steps using map algebra.