Solar photo-oxidation of recalcitrant industrial wastewater: a review

Conventional methods to clean wastewater actually lead to incomplete treatments, calling for advanced technologies to degrade recalcitrant pollutants. Herein we review solar photo-oxidation to degrade the recalcitrant contaminants in industrial wastewater, with focus on photocatalysts, reactor design and the photo-Fenton process. We discuss limitations due to low visible-light absorption, catalyst collection and reusability, and production of toxic by-products. Photodegradation of refractory organics by solar light is controlled by pH, photocatalyst composition and bandgap, pollutant properties and concentration, irradiation type and intensity, catalyst loading, and the water matrix.

     

Thermochemical conversion of municipal solid waste into energy and hydrogen: a review

The rising global population is inducing a fast increase in the amount of municipal waste and, in turn, issues of rising cost and environmental pollution. Therefore, alternative treatments such as waste-to-energy should be developed in the context of the circular economy. Here, we review the conversion of municipal solid waste into energy using thermochemical methods such as gasification, combustion, pyrolysis and torrefaction. Energy yield depends on operating conditions and feedstock composition. For instance, torrefaction of municipal waste at 200 °C generates a heating value of 33.01 MJ/kg, while the co-pyrolysis of cereals and peanut waste yields a heating value of 31.44 MJ/kg at 540 °C. Gasification at 800 °C shows higher carbon conversion for plastics, of 94.48%, than for waste wood and grass pellets, of 70–75%. Integrating two or more thermochemical treatments is actually gaining high momentum due to higher energy yield. We also review reforming catalysts to enhance dihydrogen production, such as nickel on support materials such as CaTiO₃, SrTiO₃, BaTiO₃, Al₂O₃, TiO₃, MgO, ZrO₂. Techno-economic analysis, sensitivity analysis and life cycle assessment are discussed.

     

Photocatalytic mineralization of a water pollutant,Sunset Yellow dye by an advanced oxidation process using a modified catalyst

ZnS-loaded TiO₂ (ZnS–TiO₂) was synthesized by a sol–gel method. The catalyst was characterized by using different techniques (XRD, HR-SEM, EDS, DRS, PL, XPS, and BET methods). The photocatalytic activity of ZnS–TiO₂ was investigated for the degradation of Sunset Yellow FCF (SY) dye in an aqueous solution using ultraviolet light. ZnS–TiO₂ is found to be more efficient than prepared TiO₂, TiO₂–P25, TiO₂ (Merck), and ZnS at pH 7 for the mineralization of SY. The effects of operational parameters such as the amount of photocatalyst, dye concentration, and initial pH on photo mineralization of SY have been analyzed. The mineralization of SY has been confirmed by chemical oxygen demand measurements. The catalyst is found to be reusable.     

Photocatalytic degradation of the diuron pesticide

The occurrence of chlorinated pesticides in wellwaters is a major problem of public health in Ivory Coast and other African countries. Here, we studied the photocatalytic degradation of the pesticide diuron in aqueous solution in presence of two commercial TiO₂ catalysts, P25 and PC500. The capacity of diuron adsorption at the TiO₂ surface is lower for both photocatalysts. The efficiency of photocatalytic degradation of diuron, it is higher using P25 Degussa than PC500 Millenium TiO₂ catalyst.     

Environmental risk induced by TiO2 dispersions in waters and sediments: a case study

A southern Italian area that is characterized by large outcrops of rocks that are rich in titanium oxide (TiO₂) phases were investigated to determine the mineralogical risk induced by the natural dispersion of TiO₂ minerals. Rock, sediment and surface water samples were collected to determine the physicochemical and mineralogical factors (i.e., size distribution, morphology and alteration) indicative of potential TiO₂ toxicity. X-ray diffraction data suggested that titanium oxides were present as rutile and anatase. Scanning electron microscopy images showed elongated TiO₂ morphologies; fibres were found as either isolated or embedded/enclosed in flake-like phyllosilicates. The concentration of fibres in stream water ranged from 1.7 to 4.6 million fibres per litre. The highest fibre amounts in the sediments were in the <8-µm fraction, while single fibres were primarily concentrated in the <2-µm fraction. The results indicate that titanium oxide minerals represent a natural source of environmental risk and that the geomineralogical characterization of rich TiO₂ areas is indispensable for understanding their geoavailability, dispersion and distribution.

     

Solar photocatalytic decomposition of two azo dyes on multi-walled carbon nanotubes (MWCNTs)/TiO<Subscript>2</Subscript> composites

Multi-walled carbon nanotubes (MWCNTs)/TiO₂ composite photocatalysts with high photoactivity were prepared by sol-gel process and further characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), and UV-vis absorption spectra. Compared to pure TiO₂, the combination of MWCNTs with titania could cause a significant absorption shift toward the visible region. The photocatalytic performances of the MWCNTs/TiO₂ composite catalysts were evaluated for the decomposition of Reactive light yellow K-6G (K-6G) and Mordant black 7 (MB 7) azo dyes solution under solar light irradiation. The results showed that the addition of MWCNTs enhanced the adsorption and photocatalytic activity of TiO₂ for the degradation of azo dyes K-6G and MB 7. The effect of MWCNTs content, catalyst dosage, pH, and initial dye concentration were examined as operational parameters. The kinetics of photocatalytic degradation of two dyes was found to follow a pseudo-first-order rate law. The photocatalyst was used for seven cycles with photocatalytic degradation efficiency still higher than 98%. A plausible mechanism is also proposed and discussed on the basis of experimental results.     

Preparation and characterization of a new TiO2/SiO2 composite catalyst for photocatalytic degradation of indigo carmin

The TiO₂/SiO₂ composite was prepared by means of the SiO₂-particle-entrapment method. The FTIR data showed the presence of Si–O–Ti stretching vibration band at 970 cm⁻¹ in the TiO₂/SiO₂ composite, suggesting a reaction between TiO₂ and silica on the TiO₂ particle surface during the silicagel formation around the TiO₂ particles. The photocatalytic efficiency of TiO₂ immobilized in silicagel was compared with that of the conventional TiO₂ Degussa P25 catalyst. For this purpose, the degradation of indigo carmin (IC) dye was used as model molecule in the tests. The effect of operational parameters such as catalyst loading and dye concentration on the photocatalytic degradation of the model dye was investigated. The rate of degradation increased with increasing catalyst loading, and when the concentration of the dye decreases.     

Preparation of effective TiO<Subscript>2</Subscript>/Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> photocatalysts for water treatment

Photocatalytic oxidation using semiconductors is one of the advanced oxidation processes for degradation of organic pollutants in water and air. TiO₂ is an excellent photocatalyst that can mineralize a large range of organic pollutants such as pesticides and dyes. The main challenge is to improve the efficiency of the TiO₂ photocatalyst and to extend TiO₂ light absorption spectra to the visible region. A potential solution is to couple TiO₂ with a narrow band gap semiconductor possessing a higher conduction band such as bismuth oxide. Therefore, here we prepared Bi₂O₃/TiO₂ heterojunctions by the impregnation method with different Bi/Ti ratio. The prepared composites have been characterized by UV–Vis diffused reflectance spectra and X-ray diffraction. The photocatalytic activity of the heterojunction has been determined from the degradation of orange II under visible and UV light. Results show that Bi₂O₃/TiO₂ heterojunctions are more effective than pure TiO₂-anatase under UV-A irradiation, with an optimum for the Bi/Ti ratio of 5 %, for the photocatalytic degradation of Orange II. However, the photocatalytic activity under irradiation at λ higher than 420 nm is not much improved. Under UV–visible radiation, the two semiconductors are activated. We propose a mechanism explaining why our products are more effective under UV–visible irradiation. In this case the charge separation is enhanced because a part of photogenerated electrons from the conduction band of TiO₂ will go to the conduction band of bismuth oxide. In this composite, titanium dioxide is the main photocatalyst, while bismuth oxide acts as adsorbent photosensitizer under visible light.     

Nanostructured semiconducting materials for efficient hydrogen generation

Massive production of hydrogen by water decomposition triggered by a solar light active photocatalyst is a major objective in chemistry and a promising avenue to overcome the global energy crisis. The development of efficient, stable, economically viable and eco-friendly photocatalysts for hydrogen production is a challenging task. This article reviews the use of nanocomposite in three combinations: metal oxide–metal oxide semiconductor, metal–metal oxide semiconductor and metal chalcogenide–metal oxide core–shell nanostructures. These core–shell structures occur in two forms: a simple form where the photocatalyst is either in the core or the shell or in a more complex system where the core–shell structure comprises a co-catalyst deposited on a semiconducting material. We discuss the design, synthesis and development of semiconductor-based nanocomposite photocatalysts for hydrogen production. The major points are the role of catalytic active sites, the chemical nature of sacrificial agents, the effect of light sources, the variable light intensity and the energy efficiency calculation. For TiO₂-based nanocomposites, the metal oxide or metal co-catalyst loading of 1.0–3.0 wt% was optimal. TiO₂ nanotube–CuO hybrid nanocomposites produce 1,14,000 µmol h^?1 \({\text{g}}^{ - 1}_{\text{cat}}\), whereas TiO₂/Au nanocomposites display 1,60,000 µmol h^?1 \({\text{g}}^{ - 1}_{\text{cat}}\). For core–shell catalysts, a shell thickness of 2–20 nm was found for the best activity, and its performance is as follows: (a) CdS–NiO system produces around 19,949 µmol h^?1 \({\text{g}}^{ - 1}_{\text{cat}}\) and (b) CuO–Cr₂O₃ as co-catalyst immobilized on TiO₂ system produces around 82,390 µmol h^?1 \({\text{g}}^{ - 1}_{\text{cat}}\).     

Enhanced photocatalytic activity of electrospun TiO2/polyacrylonitrile membranes in a crossflow reactor using dual lights

Photocatalytic membranes reactors have become one of the most efficient technologies to treat polluted waters. However, a major drawback is the unilateral irradiation of the membrane, where only one side of the membrane is exploited. To overcome this issue, we developed a reactor where the membrane can be irradiated on both sides. Polyacrylonitrile membranes containing different amounts of TiO₂ nanoparticles up to 60% were first prepared by electrospinning. These membranes were used in a 3D-printed crossflow photocatalytic membrane reactor for the degradation of methylene blue under different combinations of lights. The use of both sides of the photocatalytic membrane significantly enhanced the photocatalytic activity for the decolorization of methylene blue in water. The prepared membranes showed the best decolorization rate for a loading of 60% of TiO₂ and the use of dual ultraviolet lights, where the methylene blue solution was completely discolored after 90 min. This is the first report of a such system configuration, and this new irradiation concept is promising for photocatalytic membrane reactions and water cleaning.

     

Toxicity of nano-anatase TiO2 to mice: Liver injury,oxidative stress

There are concerns regarding the toxicity of nano-TiO₂, but data are limited on the mechanism underlying oxidative damage to liver of mice. In order to further study these mechanisms of nano-TiO₂ particles, nano-anatase TiO₂ (5 nm) were injected into the abdominal cavity of ICR mice daily for 14 days and biochemical parameters in liver were investigated. The increase of hepatic lipids peroxide produced by nano-anatase TiO₂ suggested an oxidative attack that was activated by a reduction of antioxidative defense mechanisms as measured by analyzing the activities of superoxide dismutase, catalase, ascorbate peroxidase, and glutathione peroxidase, as well as antioxidant levels such as glutathione and ascorbic acid. The antioxidative responses of liver were reduced in mice by nano-anatase TiO₂. The oxidative stress of nano-anatase TiO₂ on liver was greater than that seen with bulk-TiO₂.     

Photocatalytic degradation of phenol with mesoporous TiO2?xBx

We report a facile approach for preparing mesoporous boron-doped TiO₂ materials by combining the sol?Cgel process with the dehydration of glucose. Specifically a high surface carbon material was formed by dehydration of glucose, then used as template. This material and the TiO₂ dry gel were calcinated to produce porous TiO₂. The as-synthesized boron-doped TiO₂ was in pure anatase crystallite phase with high surface area. X-ray photoelectron spectroscopy (XPS) results showed that boron was incorporated into the anatase TiO₂ lattice to form TiO_2?xB_x. The absorption spectra of TiO_2?xB_x extended into the visible region to 460?nm. The TiO_2?xB_x exhibited much higher photocatalytic activity on phenol degradation than pure TiO₂. It showed that the phenol degradation by-products of TiO_2?xB_x were different from that of pure TiO₂. Mechanism of the photocatalytic degradation of phenol at TiO_2?xB_x was also proposed.     

Removal of arsenic from aqueous solution by two types of nano TiO2 crystals

Titanium dioxide (TiO₂) is a promising sorbent for As removal. There are two main and physico-chemically distinct polymorphs of TiO₂ in nature, namely anatase and rutile. Since the difference of arsenic removal by the two polymorphs of TiO₂ is now well known, study on the arsenic removal efficiency and the underlying mechanism is of great significance in developing new remediation strategies for As-polluted waters. Here batch experiments were carried out in combination with instrumental analysis of X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) to investigate the effects, influential factors and mechanisms of As removal from aqueous solution by two types of nano TiO₂ crystals. The adsorption behavior of anatase and rutile for As(V) and As(III) are well described by Freundlich equations. Anatase had higher As removal efficiency and adsorption capacity than rutile. Solution pH had no influence on the As adsorption of anatase TiO₂, whereas the As removal by rutile TiO₂ was increased by 7?C18% with pH from 4 to 10. Presence of accompanying anions such as phosphate, silicate, nitrate and sulfate, decreased the As(V) and As(III) removal by both crystals, with phosphate being the most effective. However, removal of As by rutile TiO₂ was greatly enhanced in the presence of divalent cations i.e. Ca²⁺ and Mg²⁺. Shading of light decreased the removal of As(V) and As(III) of anatase by 15.5% and 17.5%, respectively, while a slight increase of As removal was observed in the case of Rutile TiO₂. FT-IR characterization of As(V) or As(III)-treated nano TiO₂ crystals indicated that both Ti-O and As-O groups participated in As adsorption. Both FT-IR and XPS analysis demonstrated that As(III) was photooxidated into As(V) when adsorbed by anatase under the light condition. Thus, the effect of crystal types and light condition on As removal should be taken into consideration when nano TiO₂ is applied for As removal from water.     

Degradation and reduction of acute toxicity of environmentally persistent perfluorooctanoic acid (PFOA) using VUV photolysis and TiO2 photocatalysis in acidic and basic aqueous solutions

Degradation and toxicity reduction of perfluorooctanoic acid (PFOA) were investigated using TiO₂ adsorption, vacuum ultraviolet (VUV) photolysis, and VUV/TiO₂ photocatalysis in acidic and basic aqueous solutions. Chemical analyses of PFOA and its selected by-products and an acute toxicity assessment using the luminescent bacteria Vibrio fischeri (Microtox®) were conducted during and after the various treatment methods. PFOA was found to be best treated by VUV/TiO₂ at pH 4 with HClO₄, as illustrated by the almost complete degradation of PFOA within 360?min and rapid removal of acute microbial toxicity within 60?min. This difference in the efficiency may be attributed to the strong oxidation effectiveness of the radical species generated in acidic media and the electron scavenger effect of the addition of HClO₄ in VUV/TiO₂ photocatalysis. In addition, the proposed method could effectively decompose other perfluorocarboxylic acid (PFCA) species (C₃–C₇ perfluoroalkyl groups) if the initial intermediates formed were longer-chain species that degraded stepwise into shorter-chain compounds by VUV photolysis and VUV/TiO₂ photocatalysis in acidic and basic aqueous solutions.     

Histopathological effects of copper oxide nanoparticles on the gill and intestine of common carp (Cyprinus carpio) in the presence of titanium dioxide nanoparticles

In current research, the combined effects of copper oxide nanoparticles (CuO NPs) and titanium dioxide nanoparticles (TiO₂ NPs) on the histopathological anomalies of gill and intestine tissues in common carp (Cyprinus carpio) were studied. Common carp were exposed to TiO₂ NPs (10.0?mg L^?1), CuO NPs (2.5 and 5.0?mg L^?1), and mixture of TiO₂ NPs (10.0?mg L^?1)?+?CuO NPs (2.5 and 5.0 mg?L^?1) for two periods of exposure (10 and 20 days) and recovery (30 and 40 days). The most common histopathological anomalies in the gill of common carp such as hyperplasia, oedema, curvature, fusion, aneurism, and necrosis were observed. The synergistic effect of co-existing TiO₂ NPs and CuO NPs reduced the length of secondary lamella and increased the diameters of the gill filaments and secondary lamellae. Moreover, the presence of TiO₂ NPs increased the CuO NPs effects on the histopathological anomalies of intestine tissue and the synergistic effect of TiO₂ NPs and CuO mixture leads to an increase in the severity of histopathological lesions such as degeneration, swelling of goblet cells, and necrosis - erosion in the intestine tissue. In conclusion, the presence of TiO₂ NPs increased the toxicity of CuO NPs.     

Impact of photocatalytic remediation of pollutants on urban air quality

In the recent years, photocatalytic self-cleaning and “depolluting” materials have been suggested as a remediation technology mainly for NO _x and aromatic VOCs in urban areas. A number of products incorporating the aforementioned technology have been made commercially available with the aim to improve urban air quality. These commercial products are based on the photocatalytic properties of a thin layer of TiO₂ at the surface of the material (such as glass, pavement, etc.) or embedded in paints or concrete. The use of TiO₂ photocatalysts as an emerging air pollution control technology has been reported in many locations worldwide. However, up to now, the effectiveness measured in situ and the expected positive impact on air quality of this relatively new technology has only been demonstrated in a limited manner. Assessing and demonstrating the effectiveness of these depolluting techniques in real scale applications aims to create a real added value, in terms of policy making (i.e., implementing air quality strategies) and economics (by providing a demonstration of the actual performance of a new technique).

Open image in new window

     

Enhanced adsorption of arsenate on titanium dioxide using Ca and Mg ions

In this study, we report the effects of pH and divalent cations on the adsorption of arsenate (As(V)) by titanium dioxide (TiO₂) nanoparticles. The extent of As(V) adsorption on TiO₂ decreased with increasing pH due to the decrease of positively charged binding sites on the TiO₂ surface. The Langmuir maximum uptake capacity at pH 4 is about three times higher than that at pH 7. Here we show that the relatively low As(V) uptake at circumneutral pH could be substantially enhanced by the addition of common divalent cations such as magnesium and calcium. At a concentration of approximately 7 mM, magnesium and calcium increased the extent of As(V) adsorption from 2.1 to 6.5 and 7.7 mg As(V)/g TiO₂, respectively.     

Modified titanium oxide (TiO2) nanocomposites and its array of applications: a review

Titania (TiO₂) has been the focus of attention of researchers since the first demonstration of its capability to generate the photocatalytic splitting of water into hydrogen and oxygen. However, there seems to be a recent surge in the research activity, involving modified TiO₂ nanoparticles (NP), which are considered to be more effective due to different physicochemical properties in comparison to unmodified fine particle analogs. Several strategies have been employed to modify TiO₂ to reduce recombination rates of photogenerated charge carriers to enhance the optimal functioning of TiO₂. Doping with cations and anions and coupling it with another semiconductor are the most well-known modification methods used. Titania nanocomposites are known to have a plethora of applications. Photoexcitation of these particles are seen to be extraordinarily effective in eliciting microbial death which makes it an attractive candidate for the manufacturing of antimicrobial coatings. On the other hand, TiO₂ induces the oxidation of various organic refractory compounds like tetracycline, sulfamethazine, and bisphenol. The photo-electrocatalytic oxidation technique which amalgamates the principle of photocatalysis and electrolysis serves as a newer, unswerving, and cost effective water treatment process. In the biomedical arena, use is now acknowledged for the photodynamic therapy of cancer, cell imaging, biological sensors, drug delivery system, and as endonucleases. In the commercial front, it is utilized in creams owing to its small particle size, which facilitates absorption through skin. It is also employed as ultraviolet blocking agents in sunscreen and commonly encountered as a brilliant white pigment in paint due to its brightness, high refractive index and resistance to discoloration. Its use in solar cells has also been reported. This review aims to encompass the new progress of modified TiO2 nanocomposites for efficient applications, emphasizing the future trends of TiO2 in arenas like healthcare, environment, biomedical, food, personal care, and pharmacy and also highlights the commercial implications of this promising nanomaterial.     

Photocatalytic degradation of organic dyes by Er<Superscript>3+</Superscript>:YAlO<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> composite under solar light

In this work, Er³⁺:YAlO₃/TiO₂ composite was synthesized by a ultrasonic dispersion and liquid boil method. The Er³⁺:YAlO₃/TiO₂ composite and pure TiO₂ powder were characterized by XRD. The degradation of different organic dyes was used to evaluate the photocatalytic activity of the Er³⁺:YAlO₃/TiO₂ composite. It is found that the photocatalytic activity of Er³⁺:YAlO₃/TiO₂ composite is much higher than that for the similar system with only TiO₂. Moreover, this Er³⁺:YAlO₃/TiO₂ composite provides a new way to take advantage of TiO₂ in sewage treatment aspects using solar light.     

Removal of arsenate from water by adsorbents: a comparative case study

Laboratory and field filtration experiments were conducted to study the effectiveness of As(V) removal for five types of adsorbent media. The media included activated alumina (AA), modified activated alumina (MAA), granular ferric hydroxide (GFH), granular ferric oxide (GFO), and granular titanium dioxide (TiO₂). In laboratory batch and column experiments, the synthetic challenge water was used to evaluate the effectiveness for five adsorbents. The results of the batch experiments showed that the As(V) adsorption decreased as follows at pH 6.5: TiO₂ > GFO > GFH > MAA > AA. At pH 8.5, however, As(V) removal decreased in the following order: GFO = TiO₂ > GFH > MAA > AA. In column experiments, at pH 6.5, the adsorbed As(V) for adsorbents followed the order: TiO₂ > GFO > GFH, whereas at pH 8.5 the order became: GFO = TiO₂ > GFH when the challenge water containing 50 μg/L of As(V) was used. Field filtration experiments were carried out in parallel at a wellhead in New Jersey. Before the effluent arsenic concentration increased to 10 μg/L, approximately 58,000 and 41,500 bed volumes of groundwater containing an average of 47 μg/L of As(V) were treated by the filter system packed with GFO and TiO₂, respectively. The As(V) adsorption decreased in the following sequence: GFO > TiO₂ > GFH > MAA > AA. Filtration results demonstrated that GFO and TiO₂ adsorbents could be used as media in small community filtration systems for As(V) removal.