电厂建设运行中的水土流失预测与水土保持设计

在燃煤电厂建设运行的同时,将引起一系列的水土流失问题.以四川国电金堂电厂二期扩建工程为例,简要说明项目区水土流失预测的内容和方法,并在其基础上对可能产生的水土流失和危害进行了分析,同时介绍了建设期和运行期采取的综合防治措施,为类似工程的水土保持提供借鉴.     

Pyrolysis of virgin and waste polypropylene and its mixtures with waste polyethylene and polystyrene

A comparison of waste and virgin polypropylene (PP) plastics under slow pyrolysis conditions is presented. Moreover, mixtures of waste PP with wastes of polyethylene (PE) and polystyrene (PS) were pyrolyzed under the same operating conditions. Not only the impact of waste on degradation products but also impacts of the variations in the mixing ratio were investigated. The thermogravimetric weight loss curves and their derivatives of virgin and waste PP showed differences due to the impurities which are dirt and food residues. The liquid yield distribution concerning the aliphatic, mono-aromatic and poly-aromatic compounds varies as the ratio of PP waste increases in the waste plastic mixtures. In addition to this, the alkene/alkane ratio of gas products shows variations depending on the mixing ratio of wastes.     

Synthesis and Characterization of Polyols and Polyurethane Foams from PET Waste and Crude Glycerol

In this study, polyethylene terephthalate (PET) waste from post-consumer soft-drink bottles and crude glycerol from the biodiesel industry were used for the preparation of polyols and polyurethane foams. PET waste was firstly depolymerized by the glycolysis of diethylene glycol. The glycolyzed PET oligomers were then reacted with crude glycerol at different weight ratios to produce polyols via a series of reactions, such as esterification, transesterification, condensation, and polycondensation. The polyols were characterized by titration, viscometry, gel permeation chromatography (GPC), and differential scanning calorimetry. Subsequently, polyurethane (PU) foams were made via the reaction between the produced polyols and polymeric methylene-4,4′-diphenyl diisocyanate and were characterized by mechanical testing, scanning electron microscopy, and thermogravimetric analysis. Polyols from crude glycerol and their PU foams were also prepared to compare properties with those of polyols and PU foams from PET and crude glycerol. The influence of aromatic segments existing in glycolyzed PET and glycerol content on the properties of the polyols and PU foams was investigated. It was found that aromatic segments of polyols from glycolyzed PET helped increase their molecular weights and improve thermal stability of PU foams, while high glycerol content in polyols increased the hydroxyl number of polyols and the density and compressive strength of PU foams.     

Photo-oxidation and Photo-toxicity of Crude and Refined Oils

The fate and effects of an oil spill are effected by solar radiation through the action of photo-oxidation and photo-toxicity. Photo-oxidation, an important process in the weathering of oil, produces a variety of oxidized compounds, including aliphatic and aromatic ketones, aldehydes, carboxylic acids, fatty acids, esters, epoxides, sulfoxides, sulfones, phenols, anhydrides, quinones and aliphatic and aromatic alcohols. Some of these compounds contribute to the marine biota toxicity observed after an oil spill. Photo-toxicity occurs when uptake of certain petroleum compounds, e.g. certain polycyclic aromatic hydrocarbons and benzothiophenes, is followed by solar exposure which results in much greater toxicity than after dark uptake. The mechanism of PAH photo-toxicity includes absorbance of solar radiation by the PAH which produces a free radical and this free radical in turn reacts with oxygen to produce reactive oxygen species that can damage DNA and other cellular macromolecules. While most studies on photo-toxicity have been carried out in the laboratory, there are studies showing that water from an oil spill is photo-toxic to bivalve embryos for at least a few days after the spill. Other studies have found that oil contaminated sediments are photo-toxic to several marine invertebrates. More studies are required to determine if marine fauna at an oil spill site are effected by the action of photo-toxicity and photo-oxidation.     

磷对环境的污染及防治对策

我国水体富营养化严重，其主要控制因子是磷。在分析磷污染的污染状况，污染源的基础上，介绍了防治对策，采用低磷循环冷却水处理剂，减少磷排放，是防止工业磷污染的有效方法。     

Preparation and Characterization of Xylan Derivatives and Their Blends

Although hemicellulose is found widely in nature, it is currently under-utilized as a raw material for commercial applications. It would be desirable to find new uses for hemicellulose in order to add value to this agro-based material. A common type of hemicellulose is xylan, which is found in a number of wood species and in cotton. In this work we prepared cationic and anionic xylan derivatives and characterized them by ¹³C NMR, FT-IR, size exclusion chromatography (SEC), thermal analysis, and rheology. In particular, the ¹³C NMR spectra of carboxymethyl xylan (CMX) and quaternary ammonium-adducted xylan (QAX) were fully assigned with the help of samples with different degrees of substitution. SEC indicated that the beechwood xylan showed a bimodal molecular weight distribution, but with derivatization the distribution tended to become unimodal. Thermal analysis and rheology studies did not uncover any surprises; the solution of xylan and its derivatives exhibited mostly Newtonian behavior. The blends of CMX and QAX produced a precipitate at almost all ratios, indicating the formation of a polyelectrolyte complex. When cationic and anionic xylan samples were added together to paper, the paper dry strength increased. Thus, the combination of cationic/anionic xylan may be of interest in selected applications.     

Novel and innovative pyrolysis and gasification technologies for energy efficient and environmentally sound MSW disposal

Within the context of European Union (EU) energy policy and sustainibility in waste management, recent EU regulations demand energy efficient and environmentally sound disposal methods of Municipal Solid Waste (MSW). Currently, landfill with its many drawbacks is the preferred option in the EU and many other industrialised countries. Within the waste management hierarchy thermal disposal especially incineration is a viable and proven alternative. But, the dominating method, mass-burn grate incineration has drawbacks as well particularly hazardous emissions and harmful process residues. In recent years, pyrolysis and gasification technologies have emerged to address these issues and improve the energy output. To keep the many players in the field comprehensively informed and up-to-date, novel and innovative technology approaches emphasising European developments are reviewed.     

硫磺回收装置扩能改造及效果分析

介绍了回收酸性气体生产硫磺的工艺原理与工艺流程,论述了影响硫磺回收装置生产能力的诸多因素与扩能改造的情况。扩能改造后,该装置的酸性气体处理量平均为976m^3／h,瞬时处理量可达1200m^3／h,硫磺的生产能力从4450t／a提高到7500t／a,生产能力提高了68．5％,装置总硫回收率达到93．5％。     

Chemical and Microbiological Characteristics of Mineral Spoils and Drainage Waters at Abandoned Coal and Metal Mines

Mining is a long-established human activity. Abandonedmines, tailings, and mine spoils may have considerable impacton neighboring environments long after the sites are abandoned. Of greatest concern are derelict mines and wastes that generateacidic discharge waters that are enriched with iron and othermetals and metalloids. The chemistry and microbiology of thesesites are intricately intertwined. Whilst some indigenousmicroorganisms are responsible for accelerating sulfide mineraloxidation, thereby generating acidity and mobilizing metals,others catalyze reductive processes that essentially reversethese reactions and thereby ameliorate polluted mine waters.This article reviews current knowledge on the chemistry and microbiology of abandoned coal and metal mines, mine spoils and tailings.     

Preparation and Characterization of Polyaniline and Ag/ Polyaniline Composite Nanoporous Particles and Their Antimicrobial Activities

Polyaniline (PANI) and Ag/PANI nanoporous composite were prepared by an oxidative polymerization method. The oxidation process of PANI nanoparticles was occurred using (NH₄)₂S₂O₈ while the oxidation process of Ag/PANI nanoporous composite was occurred using AgNO₃ under the effect of artificial radiation. The structural, morphological, and optical properties of the PANI and Ag/PANI nanoporous structures were studied using different characterization tools. The results confirm the formation of polycrystalline nanoporous PANI and spherical nanoporous composite of Ag/PANI particles. Antibacterial activity tests against gram-positive bacteria, Bacillus subtilis and Staphylococcus aureus, and gram-negative bacteria, Escherichia coli, and Salmonella species were carried out using different concentrations of PANI nanoparticles and Ag/PANI nanoporous composites. PANI has not antibacterial effect against all studied pathogens. In contrast, Ag/PANI nanoporous composites possessed antibacterial activity that is identified by the zone of inhibition. The inhibition zones of bacteria are in order; Salmonella species?>?S. aureus?>?B. subtilis?>?E. coli. The inhibition zones of all bacteria increased with increasing concentrations of Ag/PANI nanoporous composites from 200 to 400 ppm then decreased with further increasing of the dose concentrations to 600 ppm. Finally, a simplified mechanism based on the electrostatic attraction is presented to describe the antimicrobial activity of Ag/PANI nanoporous composite.     

Laboratory Experiments and Estimation of Cumulative Infiltration and Sorptivity

Soil water cumulative infiltration affects the environment by controlling the irrigation rate and consequently the water and pollutants movement through the ground. In order to study the cumulative infiltration in a sandy soil sample, experiments were performed in the laboratory. The sample was placed uniformly in a transparent column with an inner diameter of 6 cm. A constant head boundary condition of a 2 mm height was applied on the surface of the sample and the cumulative volume of the incoming water was measured. Soil moisture at four locations of the column was measured, by using the TDR method in order to obtain the moisture profiles. By comparing the values of the infiltrated water volumes with those calculated by the integration of the moisture profiles, a good agreement was found out. Also the Parlange theoretical model fitted very well with the infiltration experimental points.     

Fate and effect of linuron and metribuzin on the co-composting of green waste and sewage sludge

The fate and effect of the herbicides linuron and metribuzin on the co-composting of sewage sludge and green waste were addressed in this work. The experiments were conducted in metal cubic containers of 1.0 m³ volume simulating a windrow composting system. A mixture of sludge and green waste was prepared at a ratio of 1:5 v/v. The mixture was split in four equal parts and the two herbicides were added, using a pressure sprayer, as sole or mixed pollutant in each of the three mixtures. The forth mixture was composted without any addition of herbicide, to serve as control. Temperature, physicochemical characteristics, herbicide concentration, carbon dioxide emission, methane emission and microbiological parameters were measured either daily or every time the mixtures were turned, for a period of 80 days. Both herbicides’ concentration decreased significantly resulting in removal efficiencies of 99.1–99.7% and 95.8–96.0% for linuron and metribuzin, respectively. Incubation of microbiologically inactive mixtures at a temperature schedule following the spontaneous temperature evolution in the composters resulted in very little (1–11%) decomposition for both herbicides. Comparison of the variation of physicochemical parameters and microbial populations during composting indicated that both herbicides did not affect the composting process.     

我国废旧电子电器产品拆解技术、设备应用现状及改进建议

从我国废旧电子电器回收行业基本情况、专业技术人才情况、相关企业拆解技术设备情况等方面，阐述了我国废旧电子电器产品拆解技术、设备应用现状，并提出相关改进提升建议。     

微生物絮凝剂及其在水处理中的应用

近年来对微生物絮凝剂的研究不断深入，新的高效菌种不断被发现。简要介绍了微生物絮凝剂的絮凝机理、分关、絮凝效果及影响因素，重点介绍了新型微生物絮凝剂在水处理中的应用。     

Toxic Properties of Metals and Organotin Compounds and Their Interactions on Daphnia magna and Vibrio fischeri

In the present study toxicity tests were performed in order to determine the toxic properties of four organotin compounds and three heavy metals and to examine the interactive effects of binary metal mixtures on two different test species: the freshwater crustacean Daphnia magna and the marine bacterium Vibrio fischeri. D. magna proved to be more sensitive to metals than V. fischeri. Tributyltin chloride and copper were found to be the most toxic substances on both test organisms. The interactive effects between trimethyltin chloride/copper and trimethyltin/chromium on both test species were investigated and synergistic, additive and antagonistic actions were observed.     

TEMPO-Mediated Oxidation of Norway Spruce and Eucalyptus Pulps: Preparation and Characterization of Nanofibers and Nanofiber Dispersions

This study deals with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation of cellulose. Softwood and hardwood pulp fibers were suspended in water and oxidized to various extents at pH 10 and 22 °C using sodium hypochlorite in the presence of TEMPO radical and sodium bromide. This reaction system is known to be the most efficient one for the introduction of both surface carboxyl and aldehyde groups. Important relationships between formation of these functional groups and the fibrillation yield, light transmittance of the water dispersions and degree of polymerization of the oxidized softwood and hardwood pulps were established in the present study. A birefringence test confirmed the presence of nanofibers which according to atomic force microscopy analyses had diameters in the 1.6–3.8 nm range.     

Photo-Stabilisation and UV Blocking Efficacy of Coated Macro and Nano-Rutile Titanium Dioxide Particles in Paints and Coatings

Surface treated macro and nanoparticle TiO₂ samples have been prepared, characterised and their efficiency as UV blockers evaluated in clear coatings and paints. The particle size of the ‘base’ TiO₂ has been optimised to block UV radiation and the surface treatment developed to deactivate the photocatalytic activity of the surface of the TiO₂ particles. The resultant UV blockers have been evaluated in both solvent and water-based clear coatings. Nanoparticle TiO₂ has been prepared from ‘seed’ and the particle size was controlled by calcination. It was found that the choice of particle size is a compromise between UVA absorption, UVB absorption, visible transmission and photoactivity. It has been demonstrated that TiO₂ with a crystallite size of 25 nm yields a product with the optimum properties. A range of dispersants was successfully used to disperse and mill the TiO₂. Both organic and inorganic dispersants were used; 2-amino-2-methyl-1-propanol and 1-amino-2-propanol (MIPA) and P₂O₅ and Na₂SiO₃ respectively. The surface of the nano-TiO₂ was coated with mixed oxides of silicon, aluminium, zirconium and phosphorous. Addition of the resultant coated nano-rutiles to an Isocyanate Acrylic clear coating prolonged the lifetime of that coating compared to the blank. Generally, a surface treatment based on SiO₂, Al₂O₃ and P₂O₅ was more successful than one based on ZrO₂, Al₂O₃ and P₂O₅. Higher addition levels of the surface treatment were beneficial for protecting the polymeric coating. The UV blocker products were also evaluated in a water-based acrylic, first a water-based dispersion of the UV blocker was prepared before addition to the acrylic. The dispersions and resultant acrylic thin films were evaluated using UV/Vis spectroscopy and durability assessed. The ratio of absorbance at 300:500 nm for the water-based dispersion was shown to be a good predictor of both the transparency of the resultant acrylic thin film and the durability of that film, in terms of weight loss. Macro grade titanium dioxide pigments were also prepared and coated with treatments of silica, alumina and siloxane and their photo-stabilising activity in alkyd paint film assessed and found to be directly related to the electron–hole pair mobility and trapping as determined by micro-wave spectroscopy.     

Evaluation of leaching and extraction procedures for soil and waste

Laboratory leaching tests may be used for source term determination as a basis for risk assessment for soil-groundwater pathways on contaminated sites. In order to evaluate different leaching procedures, batch extraction tests and percolation tests were performed using three reference materials produced from contaminated soil, demolition waste and municipal solid waste incinerator bottom ash. Emphasis was placed on the investigation of the leachability of the heavy metals copper and chromium, polycyclic aromatic hydrocarbons (PAHs) and the anions chloride and sulfate. Significant discrepancies between column experiments and batch/extraction tests were found for the release of PAHs and to a lesser extent for the heavy metals Cu and Cr. Additionally interlaboratory comparisons were conducted based on different leaching tests with the reference materials and evaluated using the criteria of comparability and reproducibility. The best reproducibility was achieved for all investigated substances in column tests. The reproducibility of batch tests was acceptable except for PAHs. The results from the experimental work will help establish standardized and feasible laboratory procedures as fundamental for substance specific risk assessment of contaminated sites.     

Oil Spills and the Social Amplification and Attenuation of Risk

The news media and environmental groups are frequently blamed for public overreaction to unfortunate events like major oil spills; an example of the social amplification of risk. A disconnect between public views regarding spill consequences and necessary remedies on the one hand, and expert opinion on these same questions on the other, is a frequently identified consequence of this social amplification. A more comprehensive examination of the ways in which scientific messages can fail to inform the public or to rationalize public policy suggests however that a more complex phenomenology is at work. Perceived risks can be attenuated as well as amplified, and many organizations besides the news media contribute to the shaping of public risk attitudes. As a result, social and political questions of blame can prove difficult to disentangle from scientific questions of impact. Both social amplification and social attenuation of messages about the risks of oil production and transport are evident in public responses to the Exxon Valdez spill, and both continue to affect the debate about oil production and its transport by sea today. Oil-spill science has had mixed success in modulating these risk concerns, as the conduct of oil-spill science has itself felt the effects of risk amplification and attenuation. Because these difficulties are bound up in questions of social trust, institution building is seen as the best long-term strategy for redress. The Prince William Sound Regional Citizen’s Advisory Council offers a hopeful example that such institution building can occur, given sufficient motivation, resources and the means and time for diverse interests to develop a shared vision of the risks to be addressed.