Biodegradation of Injection Molded Starch-Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) Blends in a Natural Compost Environment

Injection molded specimens were prepared by blending poly (hydroxybutyrate-co-valerate) (PHBV) with cornstarch. Blended formulations incorporated 30% or 50% starch in the presence or absence of poly-(ethylene oxide) (PEO), which enhances the adherence of starch granules to PHBV. These formulations were evaluated for their biodegradability in natural compost by measuring changes in physical and chemical properties over a period of 125 days. The degradation of plastic material, as evidenced by weight loss and deterioration in tensile properties, correlated with the amount of starch present in the blends (neat PHBV < 30% starch < 50% starch). Incorporation of PEO into starch-PHBV blends had little or no effect on the rate of weight loss. Starch in blends degraded faster than PHBV and it accelerated PHBV degradation. Also, PHBV did not retard starch degradation. After 125 days of exposure to compost, neat PHBV lost 7% of its weight (0.056% weight loss/day), while the PHBV component of a 50% starch blend lost 41% of its weight (0.328% weight loss/day). PHB and PHV moieties within the copolymer degraded at similar rates, regardless of the presence of starch, as determined by ¹H-NMR spectroscopy. GPC analyses revealed that, while the number average molecular weight (Mn) of PHBV in all exposed samples decreased, there was no significant difference in this decrease between neat PHBV as opposed to PHBV blended with starch. SEM showed homogeneously distributed starch granules embedded in a PHBV matrix, typical of a filler material. Starch granules were rapidly depleted during exposure to compost, increasing the surface area of the PHBV matrix.     

A Processing,Characterization and Marine Biodegradation Study of Melt-Extruded Polyhydroxyalkanoate (PHA) Films

A series of polyhydroxyalkanoates (PHA), all containing 1% nucleating agent but varying in structure, were melt-processed into films through single screw extrusion techniques. This series consisted of three polyhydroxybutyrate (PHB) and three polyhydroxybutyrate-valerate (PHBV) resins with varying valerate content. Processing parameters of temperature in the barrel (165–173 °C) and chill rolls (60 °C) were optimized to obtain cast films. The gel-permeation chromatography (GPC) results showed a loss of 8–19% of the polymer’s initial molecular weight due to extrusion processing. Modulated differential scanning calorimetry (MDSC) displayed glass transition temperatures of the films ranging from −4.6 to 6.7 °C depending on the amount of crystallinity in the film. DSC data were also used to calculate the percent crystallinity of each sample and slightly higher crystallinity was observed in the PHBV series of samples. X-ray diffraction patterns did not vary significantly for any of the samples and crystallinity was confirmed with X-ray data. Dynamic mechanical analysis (DMA) verified the glass transition trends for the films from DSC while loss modulus (E′) reported at 20 °C showed that the PHBV (3,950–3,600 MPa) had the higher E′ values than the PHB (3,500–2,698 MPa) samples. The Young’s modulus values of the PHB and PHBV samples ranged from 700 to 900 MPa and 900 to 1,500 MPa, respectively. Polarized light microscopy images revealed gel particles in the films processed through single-screw extrusion, which may have caused diminished Young’s modulus and tensile strength of these films. The PHBV film samples exhibited the greatest barrier properties to oxygen and water vapor when compared to the PHB film samples. The average oxygen transmission rate (OTR) and water vapor transmission rate (WVTR) for the PHBV samples was 247 (cc-mil/m²-day) and 118 (g-mil/m²-day), respectively; while the average OTR and WVTR for the PHB samples was 350 (cc-mil/m²-day) and 178 (g-mil/m²-day), respectively. Biodegradation data of the films in the marine environment demonstrated that all PHA film samples achieved a minimum of 70% mineralization in 40 days when run in accordance with ASTM 6691. For static and dynamic incubation experiments in seawater, microbial action resulting in weight loss as a function of time showed all samples to be highly biodegradable and correlated with the ASTM 6691 biodegradation data.     

A spectrophotometric method for detection of enzymatic degradation of thin polymer films

An assay method has been developed for monitoring the enzymatic degradation of thin films of translucent polymers. The method was based on the observation that when a solution-cast film of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) was exposed to a solution of a depolymerase fromPseudomonas lemoignei, the surface of the film roughened and the film became visibly turbid. This increase in turbidity could be measured spectrophotometrically and was reproducible during the initial stage of degradation. Turbidity correlated very closely with film weight loss early in the degradation but reached a maximum value before extensive degradation had taken place. For a given set of films, this correlation was independent of the concentration of the enzyme used, although it did vary with the mode of enzyme exposure. The turbidity was associated with the exposure of crystalline domains due to the removal of amorphous material from the film surface. The increase in crystallinity at the surface was verified by attenuated total reflectance infrared spectroscopy (ATRIR). In conjunction with SEM, weight loss, and ATRIR, the film turbidity assay provided much semiquantitative insight into the mechanism of the enzymatic degradation reaction. This assay was used to study the enzymatic degradation of films of PHBV solution blended with cellulose acetate esters (CAE). The presence of only 25% of CAE of degree of substitution 2.9 severely hampered the enzymatic degradability of PHBV, a result which is consistent with the environmental degradation of these same samples exposed to activated sludge.     

Thermal Properties and Biodegradability Studies of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

For investigating the relationship between thermal properties and biodegradability of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), several films of PHBV containing different polyhydroxyvalerate (HV) fractions were subjected to degradation in different conditions for up to 49 days. Differential scanning calorimetry (DSC), thermogravimetry (TG), specimen weight loss and scanning electron microscopy (SEM) were performed to characterize the thermal properties and enzymatic biodegradability of PHBV. The experimental results suggest that the degradation rates of PHBV films increase with decreasing crystallinity; the degradability of PHBV occurring from the surface is very significant under enzymatic hydrolysis; the crystallinity of PHBV decreased with the increase of HV fraction in PHBV; and no decrease in molecular weight was observed in the partially-degraded polymer.     

Effect of Hydrothermal Polylactic Acid Degradation on Polymer Molecular Weight and Surface Properties

In the present work, polylactic acid, PLA, samples were degraded by hydrothermal treatment, and then their molecular weights, crystallinity, surface charges and compositions, were determined, respectively, by using viscometry, ¹H NMR, Differential Scanning Calorimetry (DSC), microelectrophoresis and Infra Red spectroscopy methods. The viscometry and ¹H NMR data indicate that the molecular weight, of the polymer, decreases after the hydrothermal treatment. However, the crystalline fractions of the PLA samples, as obtained from the DSC and X-ray data, were not altered after the hydrothermal treatment. Furthermore, the zeta potential data, as determined by microelectrophoresis, show for both non-degraded and degraded PLA, an increase of the polymer surface charge density with the pH of the aqueous phase. However, at acidic pH values, the surface charge density for the degraded PLA was higher as compared to the non degraded one. These differences in surface charge densities of the PLA samples were confirmed by Infrared study, according to which the spectra of degraded polymer show the appearance of carboxyl groups occurring at 1,600 cm⁻¹ at the polymer surface.     

Environmental Degradation of Blends of Atactic Poly[(R,S)-3-hydroxybutyrate] with Natural PHBV in Baltic Sea Water and Compost with Activated Sludge

Degradation of atactic poly[(R,S)-3-hydroxybutyrate] (a-PHB) binary blends with natural poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV, 12 mol% of 3HV units), has been investigated and compared with plain PHBV in the compost containing activated sludge and under marine exposure conditions in the dynamic water of the Baltic Sea. Characteristic parameters of compost and the Baltic Sea water were monitored during the incubation period (6 weeks) and their influence on the degree of biodegradation is discussed. After specified degradation times of the experiments the weight loss of the samples, surface changes, changes in molecular weight and polydispersity as well as changes of the composition and thermo-mechanical properties of the blends have been evaluated. Macroscopic observations of the samples were accompanied by investigations using optical microscopy, size-exclusion chromatography (SEC), nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC) and tensile testing. The degree of degradation of blends of a-PHB with PHBV depends on the blend composition and environmental conditions. In both environments studied the weight loss of plain PHBV was more significant than changes the molecular weight. In both environments only enzymatic degradation of the blends, which proceeds via surface erosion mechanisms, was observed during the incubation period.     

Effect of Lignosulfonate on the Thermal and Morphological Behavior of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

The effect of lignosulfonate on poly(3-hydroxybutyrate-co-3-hydroxyvalerate), PHBV, was studied by scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The PHBV/lignosulfonate samples were prepared by melt mixing in an internal mixer. SEM showed that PHBV/lignosulfonate samples present a cracked surface that is more intense in mixtures with high lignosulfonate proportions. According to DSC, melting and glass transition temperatures of the PHBV matrix decrease with lignosulfonate addition. The same effect was observed for melting enthalpies (ΔH_m), which indicates a decrease of crystallinity. TGA showed that thermal stability of PHBV/lignosulfonate samples was shifted to lower temperatures, which indicates the existence of an interaction between the thermal decomposition processes of PHBV and lignosulfonate.     

Biodegradation of starch-poly(β-hydroxybutyrate-co-valerate) composites in municipal activated sludge

Injection-molded composites were prepared by blending PHBV⁵ with native cornstarch (30% and 50%) and with cornstarch precoated with PEO as a binding agent. These composites were evaluated for their biodegradability in municipal activated sludge by measuring changes in their physical and chemical properties over a period of 35 days. All composites lost weight, ranging from 45 to 78% within 35 days. Interestingly, the extent and rate of weight loss were quite similar in PHBV composites with no starch, with 30% starch, and with 50% starch. Weight loss was slowest in PHBV blends prepared with PEO-coated starch. For all samples, the weight loss was accompanied by a rapid deterioration in tensile strength and percentage elongation. The deterioration of these mechanical properties exhibited a relative rate of PHBV>starch-PHBV>PEO-coated starch-PHBV. Changes in starch/PHBV composition after biodegradation were quantified by FTIR spectroscopy. Increasing the starch content resulted in more extensive starch degradation, while the PHBV content in the blends became less susceptible to hydrolytic enzymes.The mention of firms names or trade products does not imply that they are endorsed or recommended by the U.S. Department of Agriculture over firms or similar products not mentioned. All programs and services of the U.S. Department of Agriculture are offered on a nondiscriminatory basis without regard to race, color, national origin, religion, sex, marital status, or handicap.     

Novel synthesis blends between bacterial polyesters and acrylic rubber: A study on enzymatic biodegradation

The biodegradability of a multicomponent system based on biotechnological occurring polyester (poly(-hydroxybutyrate-co--hydroxyvalerate) (PHBV)) with inclusion of acrylate elastomer (polybutylacrylate) (PBA) was investigated. A bacterium which produced extracellular enzymes that degrades PHBV even when blended with PBA was isolated and tentatively designated asAureobacterium saperdae. It was observed, by morphological investigation, that, while the bacterial degradation was permitted for PBA content of 20% by weight, it was inhibited for PBA content of 30%, owing to the occurrence of a rubbery layer that prevents to the bacteria an easy accessibility in the PHBV-rich regions. In fact, owing the bacterial growth, only PHBV was metabolized, whereas no degradation of PBA was detected for blend samples. It was confirmed that the degradation proceeded via surface erosion of PHBV also in the blends. Finally, mechanical tests on PHBV/PBA specimens as a function of degradation extent have shown different behavior of the blends at different the PBA content. Thermal analysis of blends and PHBV has been reported, too     

Action of soil microorganisms on PCL and PHBV blend and films

Poly(hydroxybutyrate-co-valerate) (PHBV) and poly(ε-caprolactone) (PCL) PCL/PHBV (4:1) blend films were prepared by melt-pressing. The biodegradation of the films in response to burial in soil for 30 days was investigated by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and thermogravimetry (TG). The PHBV film was the most susceptible to microbial attack, since it was rapidly biodegraded via surface erosion in 15 days and completely degraded in 30 days. The PCL film also degraded but more slowly than PHBV. The degradation of the PCL/PHBV blend occurred in the PHBV phase, inducing changes in the PCL phases (interphase) and resulting in an increase of its crystalline fraction.     

Evaluation of Material Biodegradability in Real Conditions–Development of a Burial Test and an Analysis Methodology Based on Numerical Vision

This work validated a burial protocol for in situ testing and presents a robust, repeatable and time-saving technique to measure degraded areas in the sample, i.e. an image analysis method. 1440 specimens of degraded samples have been compiled in a data base. To this end, twenty samples presenting different levels of biodegradability (i.e. PHBV/HV, PLA, PCL, PCL-Starch, paper, PE, PE-Starch) were buried at 4 different locations and then disinterred at 4, 6, 9, 12, 18, and 24-month intervals. The biodegradation levels of these samples were determined by computing weight and area loss. Weight loss was measured after careful cleaning, whereas area loss was quantified using image analysis. Image analysis gives reliable information on visual pollution while only requiring a rudimentary and thus quicker cleaning of the samples.     

The Effect of Chain Extender on Poly(3-hydroxybutyrate-co-3-hydroxyvalerate): Thermal Degradation,Crystallization, and Rheological Behaviours

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), a semi-polycrystalline biopolymer from the polyhydroxyalkanonate family has in recent years become a commercial bioplastic with mechanical properties comparable to isotactic polypropylene and enhanced O₂, CO₂ and H₂O barrier properties. However, its brittleness and sensitivity to thermal and hydrolysis degradations restrict its applications. To overcome the problems associated with degradation during processing blending of PHBV and an epoxy-functionalized chain extender (Joncryl^® ADR-4368 S) was conducted in a twin screw extruder. The effect of concentration of the chain extender on thermal, crystallization and rheological behaviours of PHBV was investigated. Thermal gravimetric analysis results indicated improvement in the resistance to thermal decomposition of PHBV by introducing the chain extender. This was accompanied with calculation of thermal degradation activation energy (E_a) using the Flyn–Walls–Ozawa method which confirmed increase of E_a with the increase in content of the chain extender. The rheological behaviour and crystallization of modified PHBV was characterized by rotational rheometry and differential scanning calorimetry techniques, respectively. The results show that addition of chain extender enhanced viscosity of PHBV and also reduce the rate of crystallization.     

Extruded Cornstarch-Glycerol-Polyvinyl Alcohol Blends: Mechanical Properties, Morphology, and Biodegradability

Elongation properties of extruded cornstarch were improved by blending with glycerol. Further blending of starch-glycerol with polyvinyl alcohol (PVOH) resulted in significant improvements in both tensile strength (TS) and elongation at break. Samples of starch-glycerol without PVOH equilibrated at 50% relative humidity had a TS of 1.8 MPa and elongation of 113%, whereas those containing PVOH had a TS and elongation of 4 MPa and 150%, respectively. Dynamic mechanical analysis (DMA) of starch-glycerol-PVOH blends showed that decreases in glass transition temperatures (T _g values) were proportional to glycerol content. Scanning electron microscopy (SEM) of fractured surfaces revealed numerous cracks in starch-glycerol (80:20) samples. Cracks were absent in starch-glycerol (70:30) samples. In both blends, many starch granules were exposed at the surface. No exposed starch granules were visible in blends with added PVOH. Starch-glycerol samples incubated in compost lost up to 70% of their dry weight within 22 days. Addition of PVOH lowered both the rate and extent of biodegradation.     

Microbial degradation of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in compost

The microbial degradation of tensile test pieces made of poly(3-hydroxybutyrate) [P(3HB)] or copolymers with 10% [P(3HB-co-10%3HV)] and 20% [P(3HB-co-20%3HV)] 3-hydroxyvaleric acid was studied in small household compost heaps. Degradation was measured through loss of weight (surface erosion) and changes in molecular weight and mechanical strength. It was concluded, on the basis of weight loss and loss of mechanical properties, that P(3HB) and P(3HB-co-3HV) plastics were degraded in compost by the action of microorganisms. No decrease inM _w could be detected during the degradation process. The P(3HB-co-20%3HV) copolymer was degraded much faster than the homopolymer and P(3HB-co-10%3HV). One hundred nine microbial strains capable of degrading the polymersin vitro were isolated from the samples used in the biodegradation studies, as well as from two other composts, and identified. They consisted of 61 Gram-negative bacteria (e.g.,Acidovorax facilis), 10 Gram-positive bacteria (mainlyBacillus megaterium), 35Streptomyces strains, and 3 molds.     

Remediation of Soil and Ground Water Contaminated with PAH using Heat and Fe(II)-EDTA Catalyzed Persulfate Oxidation

The feasibility of degrading 16 USEPA priority polycyclic aromatic (PAH) hydrocarbons (PAHs) with heat and Fe(II)-EDTA catalyzed persulfate oxidation was investigated in the laboratory. The experiments were conducted to determine the effects of temperature (i.e. 20 ^∘C, 30 ^∘C and 40 ^∘ C) and iron-chelate levels (i.e., 250 mg/L-, 375 mg/L- and 500 mg/L-Fe(II)) on the degradation of dissolved PAHs in aqueous systems, using a series of amber glass jars as the reactors that were placed on a shaker inside an incubator for temperature control. Each experiment was run in duplicate and had two controls (i.e., no persulfate in systems). Samples were collected after a reaction period of 144 hrs and measured for PAHs, pH and sodium persulfate levels. The extent of degradation of PAHs was determined by comparing the data for samples with the controls. The experimental results showed that persulfate oxidation under each of the tested conditions effectively degraded the 16 target PAHs. All of the targeted PAHs were degraded to below the instrument detection limits (∼4 μ/L) from a range of initial concentration (i.e., 5 μ/L for benzo(a)pyrene to 57 μ/L for Phenanthrene) within 144 hrs with 5 g/L of sodium persulfate at 20 ^∘ C, 30 ^∘C and 40 ^∘C. The data indicated that the persulfate oxidation was effective in degrading the PAHs and that external heat and iron catalysts might not be needed for the degradation of PAHs. The Fe(II)-EDTA catalyzed persulfate also effectively degraded PAHs in the study. In addition, the data on the variation of persulfate concentrations during the experiments indicated that Fe(II)-EDTA accelerated the consumption of persulfate ions. The obtained degradation data cannot be used to evaluate the influence of temperature and Fe(II) levels on the PAH degradation because the PAHs under each of the tested conditions were degraded to below the instrument detection limit within the first sampling point. However, these experiments have demonstrated the feasibility of degrading PAHs in aqueous systems with persulfate oxidation. Additional tests are being conducted to evaluate the effectiveness of treating PAHs in soils and obtaining the rate of degradation of PAHs with persulfate oxidation. Two sets of laboratory experiments were conducted to evaluate the ability of sodium persulfate in oxidizing real world PAH-contaminated soils collected from a Superfund site in Connecticut. The first set of soil sample were treated only with persulfate and to the second batch, mixture of persulfate and Fe(II)-EDTA solutions were added. The results of the second test showed that within 24 hours, 75% to 100% of the initial concentrations of seven PAH compounds detected in the soil samples were degraded by sodium persulfate mixed with FE(II)-EDTA.     

Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate)/Polylactide Blends: Thermal Stability,Flammability and Thermo-Mechanical Behavior

Blends of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and polylactide (PLA) with different PHBV/PLA weight ratios (100/0, 75/25, 50/50, 25/75, 0/100) were prepared by melt compounding. Their mutual contributions in terms of thermal stability, flammability resistance, mechanical properties and rheological behavior were investigated. The study showed that the increase in PLA content in PHBV/PLA blends leads to enhanced properties. Consequently, thermal stability and flammability resistance were improved. Further, the rheological measurements indicated an increase in storage modulus and loss modulus of PHBV matrix by addition of PLA.     

Production and Purification of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Degrading Enzyme from Streptomyces sp. AF-111

A poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) degrading bacterial strain designated as AF-111 was isolated from sewage sludge sample. The bacterium was identified by 16S rRNA gene sequencing. The results revealed that strain AF-111 showed 99 % similarity with Streptomyces althioticus strain NRRL B-3981 and designated as Streptomyces sp. strain AF-111. An extracellular PHBV depolymerase enzyme was produced under optimized conditions and purified through ammonium sulphate fractionation and column chromatography. The enzyme was purified to homogeneity, indicated by sodium dodecyl sulfate–polyacrylamide gel electrophoresis and molecular weight was found to be approximately 51 kDa. Effect of temperature, pH, metal ions and inhibitors on the PHBV depolymerase activity was determined. The enzyme was stable at wide range of temperature (35–55 °C) and pH (6–8). PHBV depolymerase was stable in the presence of different metal ions except iron and zinc which had inhibitory effect on depolymerase activity. Both ethylenediamine teteracetic acid and phenylmethyl sulphonyl fluoride strongly inhibited enzyme activity which indicates that this enzyme belongs to the serine hydrolase family like other polyhydroxyalkanoate depolymerases. The results show that a depolymerase from strain AF-111 can effectively degrade PHBV, therefore, it can be applied in the process of biochemical monomer recycling.     

Assessment of Ball Milling as a Compounding Technique to Develop Nanocomposites of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate) and Bacterial Cellulose Nanowhiskers

The aim of this study was the assessment of high energy ball milling technique to develop poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanocomposites containing bacterial cellulose nanowhiskers (BCNW). Crystallization behaviour of PHBV/BCNW nanocomposites was studied under non-isothermal and isothermal conditions using differential scanning calorimetry. The changes in PHBV crystalline structure were also studied using X-ray diffraction. The results confirmed that BCNW acted as nucleating agents and, hence, favored the crystallization of the PHBV. The oxygen permeability of the nanocomposites was reduced by ~22 % when compared to that of the neat PHBV. This work provides a new insight into the development of polyhydroxyalkanoate composites by means of the high energy ball milling technique.     

Effects of biodegradable plastic components on metabolism of an estuarine benthos

We examined the metabolic response of an estuarine benthic community to additions of three materials being considered for use in manufacture of biodegradable substitutes for plastics. Diver-collected cores containing benthos were dosed with 59 g/m² of three test materials, cornstarch, a bacterial polyester (PHBV), and ethylene vinyl alcohol (EVOH), or left undisturbed as controls. Fluxes of dissolved nutrients (ammonia, nitrate + nitrite, phosphate, silica) and dissolved inorganic carbon (DIC) were similar in control cores and cores dosed with EVOH during a 1-month test period at 20°C. Fluxes in cores dosed with starch and PHBV differed significantly from controls but not from each other. After 2 weeks of incubation, production of DIC was higher in cores containing starch and PHBV, while efflux of ammonia, nitrate, and nitrite was reduced. After 4 weeks of incubation, production of DIC was similar among all treatments and controls, while efflux of ammonia was high in the starch- and PHBV-containing cores compared to controls and cores with EVOH. Fluxes of silica and phosphate were similar in all cores during the experiment. These results indicate that both starch and PHBV are carbon-rich substrates readily metabolized by the benthic community but that their presence significantly alters normal nutrient exchange patterns. This response is expected because of the high carbon-to-nitrogen ratio of starch and PHBV and indicates that impacts of these two materials would be similar. However, the high biological oxygen demand of such materials and resulting disturbance of normal nutrient regeneration patterns of the benthos (delayed ammonia efflux and potential stimulation of denitrification) must be considered in developing strategies for their disposal.Paper presented at the Biodegradable Materials and Packaging Conference, September 22–23, 1993, Natick, Massachusetts.     

Biodegradability of Epoxidized Soybean Oil Based Thermosets in Compost Soil Environment

In this study, bio-thermoset from epoxidized soybean oil (ESO) was prepared in the presence of methylhexahydrophthalic anhydride curing agent and 2-ethyl-4-methylimidazole catalyst. The crosslink densities of the synthesized ESO are ranged from 0.109 × 10^?3 to 0.308 × 10^?3 mol/cm³. The ESO bio-thermosets were exposed to the soil-burial test for 8 months. Weight change and morphology of the degraded ESO specimens were assessed. It was found that the weight loss of ESO was governed by the materials compositions, crosslink density and the soil-burial exposure time. The 3 mm thickness ESO bio-thermosets with crosslink density of 0.109 × 10^?3 mol/cm³ had fully biodegraded after soil-burial for 6 months. In addition, 16S rDNA sequencing was carried out to identify the soil microorganisms. It was suggested that Comamonas sp., Bacillus sp., Streptomyces sp. and Acinetobacter sp. are the possible soil microbes that degrade the ESO bio-thermosets in the compost soil environment.