ISS-2锌渣标准样品中Zn、Pb、Cd全量浸取研究及与纯水浸提比较

锌渣标准样品２００目，已经过多家实验室协作定值，通过二种方法可提取样品中的全量Ｐｂ、Ｚｎ、Ｃｄ：（１）１＋９ＨＣｌ，密封，０１２～０１４ＭＰａ，１２１℃，６０ｍｉｎ；（２）１＋９ＨＣｌ，超声波处理，６０ｍｉｎ。     

空气或废气中挥发性醛、酮的气相色谱法测定

本文研究采用了空气或废气中挥发性醛、酮类化合物在常温下经２，４二硝基苯肼（ＤＮＰＨ）的酸性饱和溶液吸收，分别形成各自的腙，用ＣＳ２萃取后，经气相色谱法（ＧＣＦＩＤ）以３％ＳＥ３０／ＣｈｒｏｍｏｓｏｒｂＷＨＰ８０１００目为固定相和载体，分离测定，对空气或废气中的甲醛、乙醛、丙烯醛、丁醛、丙酮、丁酮、甲基异丁基酮等的测定，获得较满意的结果。     

Bi（Ⅱ）──APDC共沉淀富集脱脂棉分离FAAS测定水中痕量Pb、Cd

Ｂｉ（Ⅱ）──ＡＰＤＣ共沉淀富集脱脂棉分离ＦＡＡＳ测定水中痕量Ｐｂ、Ｃｄ王林涛，杨玲（云南玉溪地区环境监测站，６５３１００）取加热浓缩至２０ｍｌ的水样，加入Ｂｉ（Ⅱ）（１００μｇ／ｍｌ）３ｍｌ、ＡＰＤＣ３ｍｌ，ＮａＯＡＣＨＯＡＣ缓冲液２ｍｌ，调ｐＨ至...     

ICP－AES光谱法同时测定团体废物浸出液中的多种金属元素

采用翻转振荡方式以水为浸提剂浸提钢渣、尾矿渣、铬渣、铅渣、粉煤灰和电镀污泥试样，过滤后的浸提液经ＤＤＴＣ／ＣＣｌ４体系萃取富集后，用ＩＣＰ－ＡＥＳ法同时测定了Ｃｕ、Ｐｂ、Ｚｎ、Ｃｄ、Ｎｉ、Ｆｅ、Ｍｎ、Ｃｏ和Ｖ等多种金属元素．方法具有较好的精密度和准确度，宜于推广应用。     

二氧化氯,亚氯酸根及氯酸根含量在水处理中的分析方法

二氧化氟是一种具有广阔应用前景的饮用水消毒剂，制备和使用时可能产生一系列氯的不同氧化态物质，其中最主要的是ＣｌＯ２、ＣｌＯ２和ＣｌＯ３，本研究用紫外分光光度法分别测定了ＣｌＯ２和ＣｌＯ２的含量，同时用改进的碘量法分别测定溶液中同时存在的ＣｌＯ２、ＣｌＯ２和ＣｌＯ３，并讨论了有关的反应机理，测定的精密度和准确度均满足一般饮用水质分析的需要。     

多波长K系数方程法同时测定水样中的Cu~(2+)、Co~(2+)、Cd~(2+)

多波长Ｋ系数方程法同时测定水样中Ｃｕ２＋、Ｃｏ２＋、Ｃｄ２＋,即选定三个测定波长,分别将三组分在两个波长处的吸光度转换为另一波长处的吸光度,即可列出一个多元一次方程组,进而解出此波长处各组分的吸光度,求得各组分的含量。对水样中的Ｃｕ２＋、Ｃｏ２＋、Ｃｄ２＋三组分同时测定,结果令人满意。     

用新制蒸馏水代替重蒸蒸馏水配制测定亚硝酸盐氮、氨氮、酚的试液

用新制蒸馏水代替重蒸蒸馏水配制测定亚硝酸盐氮、氨氮、酚的试液ＣｏｍｐｏｕｎｄｅｄＴｈｅＳｏｌｕｔｉｏｎＮｉｔｒｉｔｅ－Ｎ，Ａｍｍｏｎｉａ－ＮａｎｄＰｈｅｎｏｌＷｉｔｈＮｅｗ－ｍａｄｅＤｉｓｔｉｌｅｄＷａｔｅｒｉｎｓｔｅａｄｏｆＡｆｒｅｓｈＤｉｓｔｉｌ...     

由河流流速、COD浓度估计河流COD衰减系数的经验模型

本文在综合分析影响河流ＣＯＤ衰减系数的各要素和系统调查相关资料的基础上,采用逐步回归分析方法得到了一个由河流流速、ＣＯＤ浓度估计河流ＣＯＤ衰减系数的经验模型,并通过方差分析检验了模型的可靠性。该经验模型简便,易于操作,既可应用于现有的河流水体,也可与水质模型相结合应用于变化后的河流水体,具有较强的应用性。     

海河下游水体中DO与NH_3-N、COD_(Mn)相关关系探讨

本文应用近年来海河下游监测数据对ＤＯ与ＮＨ３Ｎ和ＣＯＤＭｎ进行一元线性回归，得到两回归方程：ＮＨ３Ｎ＝－１２８ＤＯ＋１０５４；ＣＯＤＭｎ＝－１１３ＤＯ＋１６９２。并经相关系数和回归系数显著性检验，表明在９９９％的置信水平下ＤＯ与ＮＨ３Ｎ和ＣＯＤＭｎ线性相关均极其显著     

医院污水中BOD测定稀释倍数的探讨

探讨了一种简便的医院污水ＢＯＤ测定中样品稀释倍数的推算方法。首先测定ＣＯＤＣｒ值，由ＣＯＤＣｒ值除以系数８，即获得稀释倍数Ｃ＝ＣＯＤＣｒ／８。结果表明，该法仅需配制一个稀释比，省时省力，并具有可靠性好，准确度高，适应性强等优点。适用于各种医院污水中ＢＯＤ的分析监测。     

Concentration of Cd, Cu, Pb, Zn, Al, and Fe in soils of Manresa, NE Spain

The aims of this study were to determine the contents of cadmium (Cd), copper (Cu), lead (Pb), zinc (Zn), aluminium (Al), and iron (Fe) (aqua regia-extractable) in 27 soil plots (54 samples) from Manresa, NE Spain, and to establish relationships between heavy metals and some soil properties. The main soil types were surveyed and the median concentrations (mg kg(-1)) obtained were Cd 0.28, Cu 20.3, Pb 18.6, Zn 67.4, Al 22,572, and Fe 21,551. Element concentrations for these soils were lower than the published values for the Valencia region (Spain) and Torrelles and Sant Climent municipal districts (Catalonia, Spain). In terms of soil properties, the results of this study suggest that, in Manresa soils, both trace element adsorption and retention are influenced by several properties such as clay minerals, carbonates, organic matter, and pH. All element contents were positively correlated with clay content. Pb and Zn were negatively correlated with pH and CaCO(3).     

Determination of Cu, Pb, Zn, Ni, Co, Cd, and Mn in road dusts of Samsun City

The dust samples from 52 different locations in central roads of Samsun City were collected in a study area of 40 km long for the purpose of determining total metal concentrations of dust samples by flame atomic absorption spectrometry. The concentrations of Cu, Pb, Co, Zn, Ni, Mn, and Cd were found in the ranges of 11.92–352.43, 5.47–223.57, 4.52–41.69, 40.85–173.10, 18.71–131.29, 133.19–179.13, and 0.02–6.16 mg/kg, respectively. The results showed that metal levels were higher around the industrial area than other locations. Principal component analysis was also carried out to ascertain the possible contributing factors towards the metal concentrations. Validation of the analytical results was tested by analysis of the BCR 032 Moroccan phosphate rock certified reference material.     

Environmentally safe sewage sludge disposal: the impact of liming on the behaviour of Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn

Dewatered sewage sludge containing relatively high total concentrations of Cr (945 micrograms ml-1), Cu (523 micrograms ml-1), Ni (1186 micrograms ml-1) and Zn (2950 micrograms ml-1) was treated with quicklime and sawdust for sludge disinfection and post-stabilisation. The mobility of the heavy metals in the sludge samples was assessed by applying a modified five-step Tessier sequential extraction procedure. Water was added as a first step for estimation of the proportion of the easily soluble metal fractions. To check the precision of the analytical work the concentrations of heavy metals in steps 1-6 of the extraction procedure were summed and compared to the total metal concentrations. The mass balance agreed within +/- 3% for Cd, Cu, Cr, and Zn and within +/- 5% for Ni, Pb, Fe and Mn. Data from the partitioning study indicate that in the lime-treated sludge at a pH of 12 the mobility of Cu and Ni notably increased with the solubilisation of these metals from their organic and/or carbonate and Fe and Mn oxide and hydroxide fractions, respectively. Liming slightly decreased the proportion of other heavy metals in the easily soluble fractions while its impact on the partitioning between other sludge phases was almost insignificant. Due to the increased solubility of Ni and Cu as well as potential Cr oxidation at high pH, liming cannot be recommended for sludge disinfection. Addition of sawdust did not change the heavy metal partitioning.     

电感耦合等离子体原子发射光谱法测定水中钡、铍、硼、钒、钴、钛、钼7种微量元素

用电感耦合等离子体原子发射光谱法测定水中Ba、Be、B、V、Co、Ti、Mo 7种元素含量,具有测定方法简便、快速、准确、精密度高、数据可靠等特点。     

Prediction of the solubility of zinc, copper, nickel, cadmium, and lead in metal-contaminated soils

Risk assessment of metal-contaminated soil depends on how precisely one can predict the solubility of metals in soils. Responses of plants and soil organisms to metal toxicity are explained by the variation in free metal ion activity in soil pore water. This study was undertaken to predict the free ion activity of Zn, Cu, Ni, Cd, and Pb in metal-contaminated soil as a function of pH, soil organic carbon, and extractable metal content. For this purpose, 21 surface soil samples (0–15 cm) were collected from agricultural lands of various locations receiving sewage sludge and industrial effluents for a long period. One soil sample was also collected from agricultural land which has been under intensive cropping and receiving irrigation through tube well water. Soil samples were varied widely in respect of physicochemical properties including metal content. Total Zn, Cu, Ni, Cd, and Pb in experimental soils were 2,015?±?3,373, 236?±?286, 103?±?192, 29.8?±?6.04, and 141?±?270 mg kg^?1, respectively. Free metal ion activity, viz., pZn²⁺, pCu²⁺, pNi²⁺, pCd²⁺, and pPb²⁺, as estimated by the Baker soil test was 9.37?±?1.89, 13.1?±?1.96, 12.8?±?1.89, 11.9?±?2.00, and 11.6?±?1.52, respectively. Free metal ion activity was predicted by pH-dependent Freundlich equation (solubility model) as a function of pH, organic carbon, and extractable metal. Results indicate that solubility model as a function of pH, Walkley–Black carbon (WBC), and ethylenediaminetetraacetic acid (EDTA)-extractable metals could explain the variation in pZn²⁺, pCu²⁺, pNi²⁺, pCd²⁺, and pPb²⁺ to the extent of 59, 56, 46, 52, and 51 %, respectively. Predictability of the solubility model based on pH, KMnO₄-oxidizable carbon, and diethylenetriaminepentaacetic acid-extractable or CaCl₂-extractable metal was inferior compared to that based on EDTA-extractable metals and WBC.     

Concentrations of Arsenic, Cadmium, Copper, Lead, Selenium, and Zinc in Fish from the Mississippi River Basin, 1995

Fish were collected in late 1995 from 34 National Contaminant Biomonitoring Program (NCBP) stations and 12 National Water Quality Assessment Program (NAWQA) stations in the Mississippi River basin (MRB), and in late 1996 from a reference site in West Virginia. The NCBP sites represented key points (dams, tributaries, etc.) in the largest rivers of the MRB. The NAWQA sites were typically on smaller rivers and were selected to represent dominant land uses in their watersheds. The West Virginia site, which is in an Eastern U.S. watershed adjacent to the MRB, was selected to document elemental concentrations in fish used for other aspects of a larger study and to provide additional contemporaneous data on background elemental concentrations. At each site four samples, each comprising (nominally) 10 adult common carp (Cyprinus carpio, 'carp') or black bass (Micropterus spp., 'bass') of the same sex, were collected. The whole fish were composited by station, species, and gender for analysis of arsenic (As), lead (Pb), and selenium (Se) by atomic absorption spectroscopy and for cadmium (Cd), copper (Cu), and zinc (Zn) by inductively-coupled plasma emission spectroscopy. Concentrations of most of the elements examined were lower in both carp and bass from the reference site, a small impoundment located in a rural area, than from the NCBP and NAWQA sites on rivers and larger impoundments. In contrast, there were few overall differences between NCBP sites NAWQA sites. The 1995 results generally confirmed the continued weathering and re-distribution of these elemental contaminants in the MRB; concentrations declined or were unchanged from 1984-1986 to 1995 at most NCBP sites, thus continuing two-decade trends. Exceptions were Se at Station 77 (Arkansas R. at John Martin Reservoir, CO), where concentrations have been elevated historically and increased slightly (to 3.8-4.7 microg g-(1) in bass and carp); and Pb, Cd, and Zn at Station 67 (Allegheny R. at Natrona, PA), where levels of these metals were high in the past and increased from 1986 to 1995.     

Characterization and Identification of the Sources of Chromium, Zinc, Lead, Cadmium, Nickel, Manganese and Iron in Pm10 Particulates at the Two Sites of Kolkata, India

Monitoring of ambient PM₁₀ (particulate matter which passes through a size selective impactor inlet with a 50% efficiency cut-off at 10 μm aerodynamic diameter) has been done at residential (Kasba) and industrial (Cossipore) sites of an urban region of Kolkata during November 2003 to November 2004. These sites were selected depending on the dominant anthropogenic activities. Metal constituents of atmospheric PM₁₀ deposited on glass fibre filter paper were estimated using Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES). Chromium (Cr), zinc (Zn), lead (Pb), cadmium (Cd), nickel (Ni), manganese (Mn) and iron (Fe) are the seven toxic trace metals quantified from the measured PM₁₀ concentrations. The 24 h average concentrations of Cr, Zn, Pb, Cd, Ni, Mn and Fe from ninety PM₁₀ particulate samples of Kolkata were found to be 6.9, 506.1, 79.1, 3.3, 7.4, 2.4 and 103.6 ng/m³, respectively. The 24 h average PM₁₀ concentration exceeded national ambient air quality standard (NAAQS) as specified by central pollution control board, India at both residential (Kasba) and industrial (Cossipore) areas with mean concentration of 140.1 and 196.6 μg/m³, respectively. A simultaneous meteorology study was performed to assess the influence of air masses by wind speed, wind direction, rainfall, relative humidity and temperature. The measured toxic trace metals generally showed inverse relationship with wind speed, relative humidity and temperature. Factor analysis, a receptor modeling technique has been used for identification of the possible sources contributing to the PM₁₀. Varimax rotated factor analysis identified four possible sources of measured trace metals comprising solid waste dumping, vehicular traffic with the influence of road dust, road dust and soil dust at residential site (Kasba), while vehicular traffic with the influence of soil dust, road dust, galvanizing and electroplating industry, and tanning industry at industrial site (Cossipore).     

Occurrence,sources, and ecological risks of PBDEs,PCBs, OCPs,and PAHs in surface sediments of the Yangtze River Delta city cluster,China

Polybrominated diphenyl ethers (PBDEs), organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), and polycyclic aromatic hydrocarbons (PAHs) in 25 surface sediments in three cities (Nantong, Wuxi, and Suzhou) in the Yangtze River Delta, eastern China were measured. The mean concentrations were 378, 45.8, 1.98, 4,002 ng/g for PBDEs, OCPs, PCBs, and PAHs, respectively. Their levels in the sediments in the three cities were generally consistent with the city industrialization. PBDEs and OCPs were markedly dominated by deca-BDE (>90 %) and DDTs (>70 %). A principle component analysis of the analytes identified three major factors suggesting different sources of the contaminants in the sediments. PBDEs and the organic carbon in the sediments have common sources from industrial activities; whereas OCPs and PCBs, correlated with the second factor, were mainly from historical sources. The third factor with loadings of PAHs is indicative of various combustion sources. Ecological risk assessment indicated that the potential highest risk is from DDTs, for which 22 sites exceed the effects range low (ERL) values and three sites exceed the effects range median (ERM) value.     

水中二氧化氯,氯,亚氯酸根和氯酸根区分测定法

为了保护人类健康制定卫生规范,同时为ＣｌＯ２的研究和应用提供基础手段,必须要建立一种能准确区分测定水中ＣｌＯ２,Ｃｌ２,ＣｌＯ＾－１２,ＣｌＯ＾－３浓度的方法。回顾了现有水中ＣｌＯ２,Ｃｌ２,ＣｌＯ＾－２和ＣｌＯ＾－３的区分测定方法,评述了各种测定方法的优缺点和适用性,指出了目前在区分测定这恨氧化物的方法中存在的问题,提出了解决问题的途径。     

微波消解—原子吸收/原子荧光光度法测定活性污泥中的Cd、Pb、Ni、Cu、Zn、Cr、K、As、Hg

通过实验,建立了活性污泥中金属和重金属的测定方法。活性污泥样品经硝酸—氢氟酸或硝酸—高氯酸微波消解处理后,Pb、Ni、Cu、Zn、Cr、K选用火焰原子吸收分光光度法测定,Cd用石墨炉原子吸收分光光度法测定,As、Hg用原子荧光光度法测定。该方法操作简单,结果准确,重现性好。样品加标回收率为93%-108%,相对标准偏差〈5%。