Polycyclic aromatic hydrocarbons in crude oil-contaminated soil: A two-step method for the isolation and characterization of PAHs

A two-step analytical method is developed for the isolation and characterization of polycyclic aromatic hydrocarbons (PAHs) in crude oil contaminated soil. In the first step, those crude oil components were isolated which are easily mobilized with water from the contaminated soil (determination of groundwater pollution potential). In the second step, the fraction containing the remaining crude oil compounds was extracted using toluene. After the cleanup of the fractions, both fractions were analyzed using high-performance liquid chromatography (HPLC). The HPLC of the toluene extracted fraction shows that along with the sixteen priority pollutants from the US-EPA list, many other polycyclic aromatic hydrocarbons (PAHs) are present as well. It is evident from the chromatograms that a significant amount of PAHs are present as is also the case in the fractions eluted by water. The described method allows the determination of total organic pollutants from crude oil, some of them being potential groundwater contaminants. The major part of the total pollutants could not be mobilized by water and therefore remains in the soil, which was extracted in the second step.     

Microbial degradation of dissolved organic matter (DOM) and its influence on phenanthrene-DOM interactions

Microbial degradation-induced changes in the characteristics of dissolved organic matter (DOM), and the subsequent effects on phenanthrene-DOM interactions were investigated based on the microbial incubation of DOM collected from four different sources for 28 d. Partially biodegraded DOM presented higher specific UV absorbance (SUVA), lower protein-like fluorescence, higher humic-like fluorescence, lower aliphatic carbon fraction, and higher hydrophobic neutral fractions compared to the original DOM. Microbial changes in DOM led to an increase in the isotherm nonlinearity as well as the extent of phenanthrene binding. A negative relationship between SUVA and the Freundlich n values was established for the original and the biodegraded DOM, suggesting that aromatic condensed structures may play important roles in providing nonlinear strong binding sites irrespective of microbial degradation. In contrast, there were two separate slopes of the correlations between the percentage of hydrophobic acid (HoA) fraction and the n values for the original and the biodegraded DOM with a higher slope exhibited for the latter, implying that the microbial utilization of oxygen-containing structures in the HoA fractions may contribute to enhancing the associated isotherm nonlinearity.     

Detailed characterization of polar compounds of residual oil in contaminated soil revealed by Fourier transform ion cyclotron resonance mass spectrometry

Effects of remediation technologies on polar compounds of crude oil in contaminated soils have not been well understood when compared to hydrocarbons. In this study, ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) was used to characterize the changes in NSO polar compounds of crude oil and residual oil after long-term natural attenuation, biostimulation and subsequent ozonation following biostimulation of contaminated soils. N₁ and O₁ species, which were abundant in the crude oil, were selectively biodegraded, and species with higher double bond equivalent values and smaller carbon numbers appeared to be more resistant to microbial alteration. O₂-O₆ species were enriched by biodegradation and contained a large number of compounds with a high degree of unsaturation. Ozone could react with a variety of polar compounds in residual oil after biodegradation and showed high reactivity with polar species containing aromatic or multi-aliphatic rings, including the residual N₁ and O₁ species, naphthenic acids and unsaturated O₃-O₆ compounds. Fatty acids and O₃-O₈ species dominated by saturated alkyl compounds were resistant to ozonation or the primarily incomplete ozonation products. Principal component analysis of identified peaks in the FT-ICR MS spectra provided a comprehensive overview of the complex samples at the molecular level and the results were consistent with the detailed analysis. Taken together, these results showed the high complexity of polar compounds in residual oils after biodegradation or ozonation in contaminated soil and would contribute to a better understanding of bioremediation and ozonation processes.     

Assessment of crude oil biodegradation in arctic seashore sediments: effects of temperature,salinity, and crude oil concentration

The expected increase in offshore oil exploration and production in the Arctic may lead to crude oil spills along arctic shorelines. To evaluate the potential effectiveness of bioremediation to treat such spills, oil spill bioremediation in arctic sediments was simulated in laboratory microcosms containing beach sediments from Barrow (Alaska), spiked with North Slope Crude, and incubated at varying temperatures and salinities. Biodegradation was measured via respiration rates (CO₂ production); volatilization was quantified by gas chromatography/mass spectrophotometry (GC/MS) analysis of hydrocarbons sorbed to activated carbon, and hydrocarbons remaining in the sediment were quantified by GC/flame ionization detector (FID). Higher temperature leads to increased biodegradation by naturally occurring microorganisms, while the release of volatile organic compounds was similar at both temperatures. Increased salinity had a small positive impact on crude oil removal. At higher crude oil dosages, volatilization increased, however CO₂ production did not. While only a small percentage of crude oil was completely biodegraded, a larger percentage was volatilized within 6–9 weeks.     

Subfractionation, characterization and photooxidation of crude oil resins

Resins of five crude oils were obtained using SARA fractionation. The maltenic fraction of Blend Arabian Light, was further separated into six polar fractions. These fractions which are the constituents of the resins were analysed by FTIR spectroscopy. They appeared to be more oxidized, more aliphatic and less aromatic than asphaltenes. Photooxidation of resins showed that they are easily oxidizable and much more influenced by photooxidation than asphaltenes. The principal effect of photooxidation are: (i) increase of carbonyl group amounts and particularly formation of carboxylic groups, (ii) oxidation of sulfoxide in sulfone group, (iii) oxidation of alkyl chains and of aromatic rings (quinone structures).     

Multimedia fate of petroleum hydrocarbons in the soil: Oil matrix of constructed biopiles

A dynamic multimedia fugacity model was used to evaluate the partitioning and fate of petroleum hydrocarbon fractions and aromatic indicator compounds within the soil: oil matrix of three biopiles. Each biopile was characterised by four compartments: air, water, soil solids and non-aqueous phase liquid (NAPL). Equilibrium partitioning in biopile A and B suggested that most fractions resided in the NAPL, with the exception of the aromatic fraction with an equivalent carbon number from 5 to 7 (EC₅₋₇). In Biopile C, which had the highest soil organic carbon content (13%), the soil solids were the most important compartment for both light aliphatic fractions (EC₅₋₆ and EC₆₋₈) and aromatic fractions, excluding the EC₁₆₋₂₁ and EC₂₁₋₃₅. Our starting hypothesis was that hydrocarbons do not degrade within the NAPL. This was supported by the agreement between predicted and measured hydrocarbon concentrations in Biopile B when the degradation rate constant in NAPL was set to zero. In all scenarios, biodegradation in soil was predicted as the dominant removal process for all fractions, except for the aliphatic EC₅₋₆ which was predominantly lost via volatilization. The absence of an explicit NAPL phase in the model yielded a similar prediction of total petroleum hydrocarbon (TPH) behaviour; however the predicted concentrations in the air and water phases were significantly increased with consequent changes in potential mobility. Further comparisons between predictions and measured data, particularly concentrations in the soil mobile phases, are required to ascertain the true value of including an explicit NAPL in models of this kind.     

Microbial in situ degradation of aromatic hydrocarbons in a contaminated aquifer monitored by carbon isotope fractionation

We present an approach for characterizing in situ microbial degradation using the 13C/12C isotope fractionation of contaminants as an indicator of biodegradation. The 13C/12C isotope fractionation of aromatic hydrocarbons was studied in anoxic laboratory soil percolation columns with toluene or o-xylene as the sole carbon and electron source, and sulfate as electron acceptor. After approximately 2 months' of incubation, the soil microbial community degraded 32 mg toluene l(-1) and 44 mg o-xylene l(-1) to less than 0.05 mg l(-1), generating a stable concentration gradient in the column. The 13C/12C isotope ratio in the residual non-degraded fraction of toluene and o-xylene increased significantly, corresponding to isotope fractionation factors (alphaC) of 1.0015 and 1.0011, respectively. When the extent of biodegradation in the soil column was calculated based on the measured isotope ratios (R(t)) and an isotope fractionation factor (alphaC=1.0017) obtained from a sulfate-reducing batch culture the theoretical residual substrate concentrations (C(t)) matched the measured toluene concentrations in the column. This indicated that a calculation of biodegradation based on isotope fractionation could work in systems like soil columns. In a field study, a polluted, anoxic aquifer was analyzed for BTEX and PAH contaminants. These compounds were found to exhibit a significant concentration gradient along an 800-m groundwater flow path downstream of the source of contamination. A distinct increase in the carbon isotope ratio (delta13C) was observed for the residual non-degraded toluene (7.2 per thousand ), o-xylene (8.1 per thousand ) and naphthalene fractions (1.2 per thousand ). Based on the isotope values and the laboratory-derived isotope fractionation factors for toluene and o-xylene, the extent to which the residual substrate fraction in the monitoring wells had been degraded by microorganisms was calculated. The results revealed significant biodegradation along the groundwater flow path. In the wells at the end of the plume, the bioavailable toluene and o-xylene fractions had been almost completely reduced by in situ microbial degradation. Although indane and indene showed decreasing concentrations downstream of the groundwater flow path, suggesting microbial degradation, their carbon isotope ratios remained constant. As the physical properties of these compounds are similar to those of BTEX compounds, the constant isotope values of indane and indene indicated that microbial degradation did not lead to isotope fractionation of all aromatic hydrocarbons. In addition, physical interaction with the aquifer material during the groundwater passage did not significantly alter the carbon isotope composition of aromatic hydrocarbons.     

Photocatalytic pre-treatment with food-grade TiO2 increases the bioavailability and bioremediation potential of weathered oil from the Deepwater Horizon oil spill in the Gulf of Mexico

Using the 2010 Deepwater Horizon oil spill in the Gulf of Mexico as an impetus, we explored the potential for TiO₂-mediated photocatalytic reactive oxygen species (ROS) generation to increase the bioavailability (solubility) and biodegradability of weathered oil after a spill. Food grade TiO₂, which is FDA approved for use as food additive in the United States, was tested as a photocatalyst for this novel application. Photocatalytic pre-treatment (0.05 wt.% TiO₂, UV irradiation 18 W m^?2, 350–400 nm) for 24 h in a bench top photoreactor increased the soluble organic carbon content of weathered oil by 60%, and enhanced its subsequent biodegradation (measured as O₂ consumption in a respirometer) by 37%. Photocatalytic pre-treatment was also tested outdoors under sunlight illumination, but no significant increase in solubility or biodegradation was observed after 11 d of exposure. Although sunlight irradiation of food-grade TiO₂ generated ROS (assessed by the degradation of 4-chlorophenol as a probe compound), the efficacy of weathered oil pre-treatment was apparently hindered by sinking of the photocatalysts under quiescent conditions and illumination occlusion by the oil. Overall, results indicate that photocatalytic pre-treatment to stimulate bioremediation of weathered oil deserves further consideration, but controlling the buoyancy and surface hydrophobicity of the photocatalysts will be important for future efforts to enable ROS generation in proximity to the target compounds.     

Toxicity of dispersant application: Biomarkers responses in gills of juvenile golden grey mullet (Liza aurata)

Dispersant use in nearshore areas is likely to increase the exposure of aquatic organisms to petroleum. To measure the toxicity of this controversial response technique, golden grey mullets (Liza aurata) were exposed to mechanically dispersed oil, chemically dispersed oil, dispersant alone in seawater, water-soluble fraction of oil and to seawater as a control treatment. Several biomarkers were assessed in the gills (enzymatic antioxidant activities, glutathione content, lipid peroxidation) and in the gallbladder (polycylic aromatic hydrocarbons metabolites). The significant differences between chemically dispersed oil and water soluble fraction of oil highlight the environmental risk to disperse an oil slick when containment and recovery can be conducted. The lack of significance between chemically and mechanically dispersed oil suggests that dispersant application is no more toxic than the natural dispersion of the oil slick. The results of this study are of interest in order to establish dispersant use policies in nearshore areas.     

Ex situ bioremediation of a soil contaminated by mazut (heavy residual fuel oil)--a field experiment

Mazut (heavy residual fuel oil)-polluted soil was exposed to bioremediation in an ex situ field-scale (600 m(3)) study. Re-inoculation was performed periodically with biomasses of microbial consortia isolated from the mazut-contaminated soil. Biostimulation was conducted by adding nutritional elements (N, P and K). The biopile (depth 0.4m) was comprised of mechanically mixed polluted soil with softwood sawdust and crude river sand. Aeration was improved by systematic mixing. The biopile was protected from direct external influences by a polyethylene cover. Part (10 m(3)) of the material prepared for bioremediation was set aside uninoculated, and maintained as an untreated control pile (CP). Biostimulation and re-inoculation with zymogenous microorganisms increased the number of hydrocarbon degraders after 50 d by more than 20 times in the treated soil. During the 5 months, the total petroleum hydrocarbon (TPH) content of the contaminated soil was reduced to 6% of the initial value, from 5.2 to 0.3 g kg(-1) dry matter, while TPH reduced to only 90% of the initial value in the CP. After 150 d there were 96%, 97% and 83% reductions for the aliphatic, aromatic, and nitrogen-sulphur-oxygen and asphaltene fractions, respectively. The isoprenoids, pristane and phytane, were more than 55% biodegraded, which indicated that they are not suitable biomarkers for following bioremediation. According to the available data, this is the first field-scale study of the bioremediation of mazut and mazut sediment-polluted soil, and the efficiency achieved was far above that described in the literature to date for heavy fuel oil.     

Artificial and enhanced humification of soil organic matter using microwave irradiation

Microwave (MW) irradiation, a less energy-intensive irradiation technique, was employed to promote the changes in physicochemical properties of soil organic matter (SOM). MW was irradiated to forest soils for 10 min. Then, the physical and chemical properties of the SOM were analyzed with UV absorbance spectroscopy, Fourier transform infrared spectroscopy, elemental analysis, and size exclusion chromatography. Also, the SOM was fractionated into biopolymer, fulvic acid, and humic acid, and each fraction was analyzed quantitatively. These analyses revealed that the SOM became more aromatic and nonpolar, highly condensed, and macromolecular organic substances that possess a higher amount of functional groups found in highly humified substances than the original SOM as a result of the MW irradiation. The humification-like alteration of SOM property was attributable to the thermal cracking and to the radical reaction, particularly when the MW was irradiated along with activated carbon under the aerobic condition. The results of this study suggest that the artificial and enhanced property changes of SOM can be accomplished by MW irradiation on an engineering time scale, which can contribute to the successful soil and groundwater remediation practice.     

The effects of crude and fuel oils on the growth, chlorophyll 'a' content and dry matter production of a green alga Scenedesmus quadricauda (Turp.) bréb

The growth of Scenedesmus quadricauda algae in a batch culture was examined in the presence of crude oil and fuel oil, added to the cultivation medium in the form of a water-soluble fraction (WSF), water extract (WE) and oil-water dispersion (OWD). On applying various concentrations of oils, a decrease in the number of cells, dry matter and chlorophyll 'a' production, with respect to the cell population, was observed. The extent of this decrease depended on the kind and concentration of the soluble and dispersed hydrocarbon fractions and on the proportions in which these occurred in the culture medium. On the other hand, the water extracts of both oils stimulated dry mass and chlorophyll 'a' content with respect to a single cell. This effect was accompanied by increased size of the algal cells. The WSF, WE and OWD of fuel oil, prepared from 200, 50 and 1 cm(3) of oil per dm(3) of BBM medium, respectively, had a similar inhibitory effect, which points to the dominant role of oil dispersion in the reduction of algal growth. Chemical analysis of the water extracts of fuel oil revealed the presence of 35 hydrocarbons of various kinds, mainly n-alkanes and polycyclic aromatic hydrocarbons.     

Effects of heterocyclic PAHs (N, S, O) on the biodegradation of typical tar oil PAHs in a soil/compost mixture

The interaction phenomena during the biodegradation of typical coal tar polycyclic aromatic hydrocarbons and their heterocyclic analogues (N, S, O) were investigated in an artificially contaminated AhA1-horizon/compost mixture. All compounds were partly or completely biodegraded. Degradation of two- to five-ring PAHs was inhibited by the presence of hetero-PAHs, whereas degradation of just some hetero-PAHs was inhibited by the presence of PAHs. Among the hetero-PAHs the sulphur-containing compounds were less susceptible to degradation than the corresponding oxygen- or nitrogen-containing analogues. The basic azaarene acridine showed an extreme persistence and strong sorption to the soil matrix proved by an increase of recovery after saponification of the soil matrix.     

Bioremediation process on Brazil shoreline

GOAL, SCOPE AND BACKGROUND: Bioremediation technique can be considered a promising alternative to clean oil spills using microbial processes to reduce the concentration and/or the toxicity of pollutants. To understand the importance of this work we must know that there is only little research performed to date using bioremediation techniques to clean oil spills in tropical countries. So, the main objective of this work is to analyze the behavior of a laboratory's bioremediation test using nutrients on coastal sediments. METHODS: The bioremediation process is followed through geochemical analysis during the tests. This organic material is analyzed by medium pressure liquid chromatography (MPLC), gas chromatography/flame ionization detection (GC/FID) and gas chromatography/ mass spectrometry. By microbial counting, the number of total bacteria and degrading bacteria is determined during the experiments, in order to confirm the effectiveness of the bioremediation process. The seawater obtained throughout the bioremediation process is analyzed for nutrients grade (phosphate and ammonium ions) and also for its toxicity (Microtox tests) due the presence of hydrocarbons and fertilizer. RESULTS: The results from the geochemical analyses of the oil show a relative decrease in the saturated hydrocarbon fraction that is compensated by a relative enrichment on polar compounds. It's confirmed by the fingerprint evaluation where it is possible to see a complete reduction of the normal alkanes followed by isoprenoids. Seawater analysis done by toxicity and nutrients analysis, such as microbial counting (total and degrading bacteria), confirm the fertilizer effectiveness during the bioremediation process. DISCUSSION: Results from simulating test using NPK, a low-price plant fertilizer, suggest that it's able to stimulate the degradation process. Results from medium pressure liquid chromatography (MPLC), done at two different depths (surface and subsurface), show different behavior during the biodegradation process where the later is seen to be more susceptible to microbial attack. Data from bioremediation unit shows a bigger reduction of the saturated fraction, followed by some smaller reduction of aromatic fractions, compensated by a relative increase from polar compounds (NSO). n-C17/pristane, n-C18/ fitane and pristane/fitane rates show constant values for the unity control, different from bioremediation samples which have a significant reduction, especially on subsurface areas, where a strong fall in the rates, seen to be reduced to zero over twenty days, had occurred during the first ten days. However, sample surfaces are reduced to zero in thirty days of experiments, proving that biodegradation is better on subsurfaces. Gaseous chromatography/mass spectrometry (CG/MS) analysis shows constant values to cyclic biomarker rates and aromatic compounds, suggesting that the biodegradation process is not strong enough to reduce these composites. Microbial analysis shows a reduction on heterotrophic (total bacteria) number from control unit, probably because the bacteria uses the spill oil like carbon source and energy. However, the number increases on bioremediation unit, because it uses NPK like a biostimulator. The hydrocarbonoclastic number isn't enough on the first moment, but it's detected after 30 days and quantified in all units, showing big values especially in bioremediation. Toxicity tests confirm that NPK fertilizer does not intoxicate the shoreline during the application of the bioremediation technique. Some nutrient concentration shows high values of ammonium and phosphate per bioremediation unit, reducing by the end of the experiment. CONCLUSIONS: Results reached the goal, finding a proper nutrient (NPK fertilizer) to stimulate the biodegradation process, growing bacteria responsible for reducing impact-contaminated coast ambient by oil spills. Chemical analysis of oil shows a reduction in the saturated fraction with a relative enrichment in polar composites (NSO) and the aromatic fraction from oil remaining constant. Subsurface samples show more biodegradation than surface samples, probably because the first one has higher humidity. Linear alcanes are more biodegraded than isoprenoids, confirming the biodegradation susceptibility order. Saturated cyclic biomarkers and aromatic compounds show constant behavior maybe because the nutrients or time was not enough for microorganismic attack. Fertilizer does not demonstrate any toxic effects in local biota so that it does not compromise the technique applicability and the environment is not saturated by nutrients during the simulation, especially since the coastal environment is an open system affected daily by tides. Therefore, bioremediation tests can be classified as moderate, reaching level 5 in the classification scale by Peters & Moldowan (1993). RECOMMENDATIONS AND PERSPECTIVES: The use of marine environment by the petroleum industry on exploration, production and transportation operation, transform this oil to become the most important pollutant in the oceans. Bioremediation is an important technique used to clean spilled oil impacting on shorelines, accelerating the biodegradation process by using fertilizer growing the microorganisms responsible for decontaminating the environment. We recommend confirming the efficiency of NPK nutrient used on bioremediation simulating experiments on beaches, while monitoring the chemical changes long-term. NPK fertilizer can be used to stimulate the biodegradation process on shoreline impacted by spilled oil.     

Chronic dietary exposure to pyrolytic and petrogenic mixtures of PAHs causes physiological disruption in zebrafish—part II: behavior

In the last 10 years, behavior assessment has been developed as an indicator of neurotoxicity and an integrated indicator of physiological disruption. Polycyclic aromatic hydrocarbon (PAH) release into the environment has increased in recent decades resulting in high concentrations of these compounds in the sediment of contaminated areas. We evaluated the behavioral consequences of long-term chronic exposure to PAHs, by exposing zebrafish to diets spiked with three PAH fractions at environmentally relevant concentrations. Fish were exposed to these chemicals from their first meal (5 days postfertilization) until they became reproducing adults (at 6 months old). The fractions used were representative of PAHs of pyrolytic (PY) origin and of two oils differing in composition (a heavy fuel oil (HO) and a light crude oil (LO)). Several tests were carried out to evaluate circadian spontaneous swimming activity, responses to a challenge (photomotor response), exploratory tendencies, and anxiety levels. We found that dietary PAH exposure was associated with greater mobility, lower levels of exploratory activity, and higher levels of anxiety, particularly in fish exposed to the HO fraction and, to a lesser extent, the LO fraction. Finally, our results indicate that PAH mixtures of different compositions, representative of situations encountered in the wild, can induce behavioral disruptions resulting in poorer fish performance.     

Comparative analysis of the structure of carbon materials relevant in combustion

The determination of the structure of carbon materials is an analytical problem that join the research scientific communities involved in the chemical characterization of heavy fuel-derived products (heavy fuel oils, coal-derived fuels, shale oil, etc.) and of carbon materials (polycyclic aromatic compounds, tar, soot) produced in many combustion processes.

The knowledge of the structure of these “difficult” fuels and of the carbon materials produced by incomplete combustion is relevant to research for the best low-environmental impact operation of combustion systems; but an array of many analytical and spectroscopic tools are necessary, and often not sufficient, to attempt the characterization of such complex products and in particular to determine the distribution of molecular masses.

In this paper the size exclusion chromatography using N-methyl-pyrrolidinone as eluent has been applied for the characterization of different carbon materials starting from typical carbon species, commercially available like polyacenaphthylene, carbon black, naphthalene pitch up to combustion products like soot and soot extract collected in fuel-rich combustion systems. Two main fractions were detected, separated and molecular weights (MWs) determined by comparison with polystyrene standards: a first fraction consisted of particles with very large molecular masses (>100 000 u); a second fraction consisted of species in a relatively small MW range (200–600 u). The distribution of these fractions changes in dependence on the carbon sample characteristics.

Fluorescence spectroscopy applied on the fractions separated by size-exclusion chromatography has been used and comparatively interpreted giving indications on the differences and similarities in chemical structure of such different materials.     

石油降解菌XD-1产表面活性剂的性能

从含油废水中筛选分离到1株原油降解菌XD-1,鉴定为假单胞菌(Pseuomonas sp.).初步实验表明菌XD-1具有较强的产表面活性剂乳化原油的作用,对该菌的产表面活性剂性能进行了研究.实验证明,菌XD-1所产表面活性剂为脂肽类物质,菌在生长对数期产表面活性剂,表面活性剂的产生为生长相关型;充足的碳源是产表面活性剂的必需条件,菌利用原油为碳源时能持续大量地产表面活性剂;原油和尿素为产表面活性剂的最适碳源和氮源,菌XD-1产表面活性剂的最佳营养培养基组成为葡萄糖10 g,尿素4 g,磷酸二氢钾1 g,微量元素液4 mL,水1 L,pH 8.0.     

Organic contaminates in water

Abstract

The carbon adsorption method was used for separating organic matter from large samples of drainage, river and tap water. The carbon chloroform extract (CCE) was separated into different solubility fractions and the neutral fraction was separated into aliphatic, aromatic and oxy‐compounds using column chromatography. The aromatic fraction was subjected to TLC, IR and UV analysis. The pesticide endrin was present in both river and tap water at concentrations of 0.7 and 1.5 ppb, respectively.     

Assessment of MSWI bottom ash organic carbon behavior: a biophysicochemical approach

In order to understand the influence of organic components on the behavior of municipal solid waste incinerator bottom ash, samples from five French incinerators have been analyzed and compared. Biological and physico-chemical experiments were coupled with a view to developing a new rapid assessment method of bottom ash quality. Bottom ash had different total organic carbon contents ranging from 8.8 g kg(-1) to 37.4 g kg(-1). A part of this organic carbon can be leached into the environment or provide a substrate for microbial activity. Samples showed really different behaviors regarding these processes. Comparative results of leaching tests and biodegradation experiments showed a positive correlation between dissolved organic carbon and microbial activity. However, quantities of biodegraded or leached carbon are not representative of the samples' total organic carbon content. Thermal analyses in oxidizing conditions have revealed the presence of two fractions of organic components, showing different thermal behaviors. The associated mass losses were measured and compared to dissolved organic carbon. One of the two fractions can be directly linked to the leachable and easily biodegradable organic matter fraction. Calorimetric test is then presented as a novel analysis method that allows to provide rapid and global information concerning the characteristics of organic matter in bottom ash and its possible short and long-term evolution.     

A comparison of the efficiency of different surfactants for removal of crude oil from contaminated soils

This paper presents the results from study investigating the efficiency with which different surfactants remove crude oil from contaminated soil using a soil washing process. The surfactants studied were aqueous solutions of rhamnolipid, saponin and sodium dodecyl sulfate (SDS). The efficiency of surfactants' removal was quantified and then GC/MS analysis conducted to investigate the distribution of hydrocarbons remaining on the washed soil samples compared to those on a control. The results showed that SDS removed the most crude oil from soil, followed by rhamnolipid and then saponin. However, the different surfactants showed preferences in terms of which crude oil components they removed from the contaminated soil. SDS removed more of the aliphatics than aromatic hydrocarbons whereas saponin removed the aromatic hydrocarbon preferentially to the aliphatic hydrocarbons. Clearly these results provide important information for the selection of surfactants used to remove crude oil from contaminated soils.