河南省典型城市PM2.5无机元素污染特征及来源分析

分析2012年采暖季和非采暖季郑州市、洛阳市和平顶山市大气细颗粒物(PM_(2.5))样品中22种无机元素含量和污染特征,采用富集因子法、因子分析法研究当地PM_(2.5)中无机元素来源。结果表明:3个城市PM_(2.5)中无机元素总量在采暖季均高于非采暖季,不同季节占PM_(2.5)质量浓度的比例为1.7%~3.6%。Al、Na、Ca等地壳元素在PM_(2.5)中占比与PM_(2.5)浓度呈负相关关系,而Zn、Pb、Cu等人为源元素的占比随PM_(2.5)浓度增加无明显下降趋势。3个城市PM_(2.5)中Se、Cd、Br的富集因子高于1 000,Pb、Zn、Cu的富集因子为100~1 000,Co、Sc、Cr、Ni、As、Mn、Ba的富集因子为10~100,说明这些元素主要来源于人为源。13种人为源元素质量浓度在22种元素中占比为18.9%~26.3%,K、Fe、Ca、Al等4种元素占比为67.9%~76.1%。因子分析结果表明:3个城市无机元素来源组成有很大相似性,主要来源于燃煤、机动车、扬尘和建筑尘等,但Ni、Co、Sr、Ba还有来自其他排放源的贡献。     

中国城市PM2.5空气质量改善分阶段目标研究

中国城市细颗粒物(PM_(2.5))空气质量达标率低,且城市间的污染程度差异较大。为了整体改善PM_(2.5)空气质量,需要针对不同污染程度的城市,制定分阶段改善目标加以考核和管理,研究探讨了城市PM_(2.5)空气质量改善目标体系及不同污染程度城市各阶段目标值。首先运用文献综述法、国内外对比分析法梳理评述了WHO、欧美等发达国家PM_(2.5)的空气质量标准和达标要求,提出中国城市PM_(2.5)空气质量改善的考核目标体系,包括PM_(2.5)浓度目标值或下降率、严重污染天数上限、达标天数下限等指标。通过历史数据分析法研究了2000—2013年美国、日本一些城市和2013—2016年中国74个环保城市PM_(2.5)年均浓度的变化趋势,推论出中国城市PM_(2.5)年均浓度年均下降5%~8%是可能实现的;结合环境保护部及各省市PM_(2.5)污染防治规划,提出PM_(2.5)空气质量改善目标的设定原则和达标天数的回归计算方法;以2014年114个城市PM_(2.5)年均浓度为基数,计算得出不同污染程度城市2020、2025、2030年PM_(2.5)年均浓度年下降率和达标天数的目标值。     

Heavy metals in urban ambient PM10 and soil background in eight cities around China

The ambient PM₁₀ and background soil samples were collected and analyzed with ICP-AES in eight cities around China to investigate the levels of ten heavy metals (Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, and Pb). The mean concentrations of ten heavy metals in PM₁₀ of the eight cities of China followed the order of Zn?>?Pb?>?Mn?>?Cu?>?Ni?>?Cr?>?Co?>?V. The metals in the ambient PM₁₀ and soil were compared in each city to evaluate the heavy metal mass fraction from anthropogenic sources in ambient air. The CD values in these cities were all above 0.2, indicating that the ingredients spectrums of PM₁₀ and soil vary markedly. Most heavy metals were enriched in PM₁₀, except Fe and Ti. The results showed that almost all the cities suffer important heavy metal pollution from anthropogenic sources. The eight cities were also grouped according to their similarity in heavy metals of ambient PM₁₀ by cluster analysis to investigate the relationship between the heavy metals and the pollution sources of each city. The conclusion was that the eight cities were divided into three clusters which had similar industrial type and economy scale: the first cluster consisted of Shenzhen, Wuxi, and Guiyang; followed by Jinan and Zhengzhou as the second grouping; and the third group had Taiyuan, Urumqi, and Luoyang.     

西藏自治区“十二五”和“十三五”环境空气质量变化特征

"十二五"以来中国先后颁布了一系列大气污染防治政策并实施相应的大气污染治理措施以提高环境空气质量。为研究西藏自治区"十二五"(2011-2015年)和"十三五"(2016 -2020年)时期环境空气质量变化状况,评估大气污染防治措施实施效果,笔者对2011-2020年西藏自治区7个城市(地区)主要大气污染物浓度和优良天数比例变化进行分析。结果表明:随着一系列大气污染防治措施的实施,西藏自治区环境空气质量显著提升,与"十二五"时期相比,"十三五"时期西藏自治区年平均优良天数比例由97.5%±2.0%提升至99.3%±0.4%,SO₂、 NO₂、 PM₁₀、 PM_2.5浓度年均值和CO 浓度第95百分位数均呈下降趋势,其中CO、PM₁₀和PM_2.5浓度下降幅度较大,O₃日最大8h滑动平均值第90百分位数略有上升。西藏自治区环境空气质量与人口、经济发展程度呈负相关关系。受污染源排放、气象条件和区域传输等因素影响,西藏自治区O₃浓度春、夏季较高,而其余污染物浓度冬季较高。     

Diurnal concentrations variations,size distributions for ambient air particles and metallic pollutants (Cr,Mn, Ni,Cd, Pb) during summer season at a traffic area

This study characterized and discussed particulate ambient air particulate concentrations and seasonal variations for PM₁₈, PM₁₀, PM_2.5, and PM₁ during June 2013–July 2013 at this traffic sampling site. In addition, this study also characterized the ambient air particulates size distributions by using MOUDI-100S4 sampler to collect 1-day the ambient suspended particles (PM₁₈, PM₁₀, PM_2.5, and PM₁) at this sampling site. In addition, the study also showed that the main pollutants contributions were from traffic and residual areas. As for the pollutants seasonal concentrations variations, the results indicated that the average particle concentrations orders were all displayed as daytime?>?nighttime for PM₁₈, PM₁₀, PM_2.5 and PM₁ at this characteristic sampling site. The results further indicated that the mean highest of metal concentrations in this study indicated that the average metal concentration were all displayed as Mn?>?Cr?>?Ni?>?Pb?>?Cd for PM₁₈, PM₁₀, PM_2.5 and PM₁ on daytime and nighttime at this characteristic sampling site.     

不同区域城市空气O3和PM2.5累积速率时序模型

利用2017—2018年全国7个区域10个典型城市环境空气O₃和PM_2.5浓度数据，统计污染物累积速率，进而采用回归方法拟合污染物浓度及其累积速率的时间序列模型，分析不同区域污染物时序变化特征差异。结果表明：不同区域O₃浓度时序曲线拟合程度总体高于PM_2.5，石家庄O₃拟合程度最高，西安PM_2.5拟合程度最高。以07：00、14：00分别作为O₃、PM_2.5模拟起点是24 h中的最优模型。不同城市夏季O₃小时浓度时序变化曲线均为单峰形态，O₃浓度及累积速率峰值出现时间可能由城市所处经度决定，太原O₃累积最快，西安O₃消解最快。各城市间冬季PM_2.5小时浓度及其累积速率时序变化曲线形态差异较大，沈阳PM_2.5累积和消解均最快。与浓度相比，城市环境空气O₃和PM_2.5累积速率与光照、扩散条件等有更好的时间相关性。     

Distribution of PM2.5 and PM10-2.5 in PM10 Fraction in Ambient Air Due to Vehicular Pollution in Kolkata Megacity

This research paper aims at establishing baseline PM₁₀ and PM_2.5 concentration levels, which could be effectively used to develop and upgrade the standards in air pollution in developing countries. The relative contribution of fine fractions (PM_2.5) and coarser fractions (PM_10-2.5) to PM₁₀ fractions were investigates in a megacity which is overcrowded and congested due to lack of road network and deteriorated air quality because of vehicular pollution. The present study was carried out during the winter of 2002. The average 24h PM₁₀ concentration was 304 μg/m³, which is 3 times more than the Indian National Ambient Air Quality Standards (NAAQS) and higher PM₁₀ concentration was due to fine fraction (PM_2.5) released by vehicular exhaust. The 24h average PM_2.5 concentration was found 179 μg/m³, which is exceeded USEPA and EU standards of 65 and 50 μg/m³ respectively for the winter. India does not have any PM_2.5 standards. The 24 h average PM_10-2.5 concentrations were found 126 μg/m³. The PM_2.5 constituted more than 59% of PM₁₀ and whereas PM₁₀-PM_2.5 fractions constituted 41% of PM₁₀. The correlation between PM₁₀ and PM_2.5 was found higher as PM_2.5 comprised major proportion of PM₁₀ fractions contributed by vehicular emissions.     

Receptor model-based source apportionment of particulate pollution in Hyderabad, India

Air quality in Hyderabad, India, often exceeds the national ambient air quality standards, especially for particulate matter (PM), which, in 2010, averaged 82.2?±?24.6, 96.2?±?12.1, and 64.3?±?21.2 μg/m³ of PM₁₀, at commercial, industrial, and residential monitoring stations, respectively, exceeding the national ambient standard of 60 μg/m³. In 2005, following an ordinance passed by the Supreme Court of India, a source apportionment study was conducted to quantify source contributions to PM pollution in Hyderabad, using the chemical mass balance (version 8.2) receptor model for 180 ambient samples collected at three stations for PM₁₀ and PM_2.5 size fractions for three seasons. The receptor modeling results indicated that the PM₁₀ pollution is dominated by the direct vehicular exhaust and road dust (more than 60 %). PM_2.5 with higher propensity to enter the human respiratory tracks, has mixed sources of vehicle exhaust, industrial coal combustion, garbage burning, and secondary PM. In order to improve the air quality in the city, these findings demonstrate the need to control emissions from all known sources and particularly focus on the low-hanging fruits like road dust and waste burning, while the technological and institutional advancements in the transport and industrial sectors are bound to enhance efficiencies. Andhra Pradesh Pollution Control Board utilized these results to prepare an air pollution control action plan for the city.     

基于区域环境空气质量和碳排放数据的减污降碳协同效果评估

化石燃料燃烧产生的温室气体与大气污染物具有同根同源性,但具体治理中减污降碳的协同效果尚不明确。以浙江省11个设区市为研究样本,对环境空气质量和二氧化碳(CO₂)排放数据进行分析研究,结果显示：2016—2020年浙江省环境空气质量持续改善,但CO₂排放总量仍处于增长阶段。11个设区城市PM_2.5年均浓度降幅在26%～41%之间,二氧化氮(NO₂)年均浓度下降趋势不明显,大部分城市呈现碳排放增加、NO₂浓度下降的特征,只有杭州和温州两市呈现碳排放总量和NO₂、PM_2.5浓度协同下降的趋势。因子相关性分析结果表明,各设区市呈现NO₂浓度与碳排放相关性较大、协同性强,PM_2.5浓度与碳排放相关性较小的特点。进一步通过减污降碳协同定量评价分析表明,浙江地区在环境空气质量改善和温室气体减排已表现出一定成效,但各设区市因产业结构、环境基础条件、协同程度等不同导致减污降碳综合绩效有明显差异。从源头减排实现...     

应用化学质量平衡模型解析西宁大气PM2.5的来源

为研究影响西宁市大气环境PM_(2.5)污染水平的主要来源,于2014年采暖季、风沙季和非采暖季依托西宁市大气地面观测网络在11个监测点采集大气PM_(2.5)样品,对其化学组分(元素、离子和碳)进行分析。研究同步采集了4类固定源、14类移动源和4类开放源的PM_(2.5)样品,并构建源排放成分谱。应用化学质量平衡受体模型(CMB)开展源解析研究。源解析结果表明,观测期间西宁市PM_(2.5)主要来源包括城市扬尘(分担率为26.4%)、燃煤尘(14.5%)、机动车尾气(12.8%)、二次硫酸盐(9.0%)、生物质燃烧(6.6%)、二次硝酸盐(5.7%)、钢铁尘(4.7%)、锌冶炼尘(3.4%)、建筑尘(4.4%)、土壤尘(4.4%)、餐饮排放(2.9%)和其他未识别的来源(5.2%)。大力开展城市扬尘为主的开放源污染控制,严格控制本地燃煤、机动车等污染源的PM_(2.5)排放,是改善西宁市空气质量的重要途径。     

西宁市城区冬季PM2.5和PM10中有机碳、元素碳污染特征

2014年11月—2015年1月对西宁市冬季开展PM_(2.5)和PM_(10)的连续监测。利用DRI 2001A型热光碳分析仪(美国)对有机碳和元素碳进行分析,结果表明:西宁市冬季PM_(2.5)和PM_(10)中碳气溶胶所占比例分别为33.13%±6.83%、24.21%±6.27%,说明碳气溶胶主要集中在PM_(2.5)中;OC/EC值均大于2,说明西宁市大气中存在二次污染;SOC占PM_(2.5)和PM_(10)的质量浓度比例分别为46.50%和57.40%,PM_(2.5)中SOC浓度占PM_(10)中SOC浓度的61.88%,说明SOC主要存在于PM_(2.5)中,且SOC形成的二次污染和直接排放的一次污染都是西宁市碳气溶胶的主要来源;与其他城市比较发现,西宁市冬季PM_(2.5)中的碳气溶胶含量普遍高于其他城市,PM_(10)中OC质量浓度相对其他城市较高,EC质量浓度偏低;OC和EC的相关性不显著,说明来源不统一;进一步对OC和EC各组分质量浓度进行分析知,西宁市冬季碳气溶胶主要来源于机动车汽油排放、燃煤和生物质燃烧。     

黑龙江省环境空气污染物和气象要素的典型相关分析

通过对黑龙江省4个自然年(2016年1月1日—2019年12月31日)环境空气污染物和气象要素的分析,揭示了黑龙江省气象条件对空气污染物浓度的影响规律与特征。对PM_(2.5)、PM_(10)、SO_2、NO_2、CO和O_3等6项污染物的描述性统计和简单的相关分析显示:黑龙江省环境空气质量呈现逐年变好的趋势,非采暖期环境空气质量好于采暖期,6项污染物中除O_3呈现夏季偏高以外,其余污染物采暖期浓度均高于非采暖期。运用典型相关分析法探究环境空气污染物与温度、降水量、相对湿度、风速和气压5项气象要素之间的关系,并进行统计学检验,结果表明:环境空气污染物与气象要素之间存在显著相关,温度、风速和相对湿度对污染物具有显著影响。非采暖期大气相对湿度对PM_(10)和O_3-8h的影响显著;而在采暖期,风速对PM_(10)和PM_(2.5)的影响显著。     

青藏高原典型城市拉萨市大气颗粒物污染源成分谱建立研究与特征分析

系统研究建立高原典型城市拉萨市开放源(土壤风沙尘、道路扬尘、施工扬尘、采矿扬尘),移动源(机动车尾气尘),固定源(工业烟粉尘、生物质燃烧尘及餐饮油烟)共3类8种大气颗粒物(PM_(2.5)、PM_(10))污染源化学成分谱。研究结果表明:开放源以地壳类元素为主,自然背景特征明显;移动源源成分谱中元素碳含量明显高于其他城市,在PM_(2.5)、PM_(10)源谱中分别占60.15%、51.86%,有机碳含量也相对较高,均超过20%;固定源中,牛粪和松柏枝两类生物质燃烧污染源的有机碳含量显著高于其他组分,工业烟粉尘中Ca远高于其他组分,在PM_(2.5)、PM_(10)源谱中分别占21.32%、21.21%。移动源、固定源源成分谱均显示出高原城市的独特特征。     

Motor Vehicle Contributions to Ambient PM10 and PM2.5 at Selected Urban Areas in the USA

A source apportionment study was carried out to estimate the contribution of motor vehicles to ambient particulate matter (PM) in selected urban areas in the USA. Measurements were performed at seven locations during the period September 7, 2000 through March 9, 2001. Measurements included integrated PM_2.5 and PM₁₀ concentrations and polycyclic aromatic hydrocarbons (PAHs). Ambient PM_2.5 and PM₁₀ were apportioned to their local sources using the chemical mass balance (CMB) receptor model and compared with results obtained using scanning electron microscopy (SEM). Results indicate that PM_2.5 components were mainly from combustion sources, including motor vehicles, and secondary species (nitrates and sulfates). PM₁₀ consisted mainly of geological material, in addition to emissions from combustion sources. The fractional contributions of motor vehicles to ambient PM were estimated to be in the range from 20 to 76% and from 35 to 92% for PM_2.5 and PM₁₀, respectively.     

Chemical composition of ambient particulate matter and redox activity

Exposure to ambient particulate matter (PM) has been associated with a number of adverse health effects. Increasing studies have suggested that such adverse health effects may derive from oxidative stress, initiated by the formation of reactive oxygen species (ROS) within affected cells. The study aimed to assess physical characteristics and chemical compositions of PM and to correlate the results to their redox activity. PM_2.5 (mass aerodynamic diameter ≤2.5 μm) and ultrafine particles (UFPs, mass media aerodynamic diameter <0.1 μm) were collected in an urban area, which had heavy traffic and represented ambient air pollution associated with vehicle exhaust. Background samples were collected in a rural area, with low traffic flow. Organic carbon (OC), elemental carbon (EC), polycyclic aromatic hydrocarbons (PAHs), and metals were analyzed. The dithiothreitol activity assay was used to measure the redox activity of PM. Results showed that UFPs have higher concentrations of OC, EC, and PAHs than those of PM_2.5. Several metals, including Fe, Cu, Zn, Ti, Pb, and Mn, were detected. Among them, Cu had the highest concentrations, followed by Fe and Zn. Organic carbon constituted 22.8% to 59.7% of the content on the surface of PM_2.5 and UFPs. Our results showed higher redox activity on a per PM mass basis for UFPs as compared to PM_2.5. Linear multivariable regression analyses showed that redox activity highly correlated with PAH concentrations and organic compounds, and insignificantly correlated with EC and metals, except soluble Fe, which increased redox activity in particle suspension due to the presence of ROS.     

Air Pollution Concentrations of PM2.5, PM10 and NO2 at Ambient and Kerbsite and Their Correlation in Metro City – Mumbai

Ambient concentrations of PM_2.5 and PM₁₀ are of concern with respect to effects on human health and environment. Increased levels of mortality and morbidity have been associated with respirable particulate air pollution. In India, it is not yet mandatory to monitor PM_2.5 levels therefore very limited information is available on PM_2.5 levels. To understand the fine particle pollution and also correlate with PM₁₀ which are monitored regularly in compliance with ambient air quality standards. This study was carried out to monitor PM_2.5, PM₁₀, and NO₂ for about one year in a residential cum commercial area of Mumbai city with a view to understand their correlation. The average PM_2.5 concentration at ambient and Kerbsite was 43 and 69 μg/m³. The correlation coefficients between PM_2.5 and PM₁₀ at ambient and Kerbsite were 0.83 and 0.85 respectively thus indicating that most of the PM_2.5 and PM₁₀ are from similar sources. TSP, PM₁₀ levels exceeded Central Pollution Control Board(CPCB) standard during winter season. PM_2.5 levels also exceeded 24 hourly average USEPA standard during winter season indicating unhealthy air quality.     

基于系统聚类方法划分中国PM2.5防治区域

中国各城市细颗粒物(PM_(2.5))环境空气质量差异较大,呈现明显的区域污染特征。合理划分PM_(2.5)污染防治区域、开展区域性大气环境管理,是改善区域空气质量的重要途径。根据2015年全国108个重点城市大气PM_(2.5)的日均浓度数据,使用系统聚类方法对各城市的PM_(2.5)全年污染变化特征进行分析,从而划分出不同防治区域。依据聚类分析的3项原则,综合比较4种不同聚类方法及结果,最后提出可以划分出8个PM_(2.5)污染防治区域:a赣鄂湘接壤地区(长株潭及周边城市),b成渝及周边地区,c粤桂地区,d闽浙沿海城市群,e东三省地区,f长三角地区,g山东及周边地区,h京津冀、山西中北部、陕西关中城市群。     

山西省大气污染特征及对公众健康的空间影响

利用山西省11个地级市大气环境监测站的PM_2.5、PM₁₀和O₃浓度数据,分析了2015—2020年山西省PM_2.5、PM₁₀和O₃浓度时空变化特征,采用空间计量模型和岭回归方法,分析了空气污染对公众健康的空间影响。结果表明:PM_2.5和PM₁₀年均质量浓度总体下降,两者在2017年最高,2020年最低;O₃年均浓度总体增加。在季节尺度上,PM_2.5和PM₁₀质量浓度在冬季的12月和1月最高,夏季的8月最低;O₃浓度在6月最高。空间上,相较2015年,2020年山西省各地级市PM_2.5污染程度均有改善,其中长治改善效果最好;2020年山西各地级市PM₁₀污染兼有加重和减轻的情形,所有地级市PM_2.5和PM₁₀污染水平均超过国家二级污染浓度限值;2020年山西多数地级市O₃浓度升高。山西公众健康水平具有明显的空间离散特征,PM_2.5和PM₁₀浓度的局部空间自相关特征高度一致,呈现"南高北低"的格局,O₃浓度分布呈"南部高,中北部低"的格局。大气环境质量和经济发展水平均对医疗机构诊疗人数和健康体检人数的变化有正向影响,每万人卫生技术人员数量和公共财政支出比例对公众健康均有负向影响,其中经济发展水平和大气环境质量的影响最显著。山西省PM_2.5治理取得一定成效,但大部分城市PM_2.5和PM₁₀达标率较低,O₃浓度有持续升高的趋势,PM₁₀和O₃污染改善缓慢,深度减排仍面临挑战。PM_2.5和PM₁₀是危害山西公众健康的主要大气污染物,未来需要加强PM_2.5、PM₁₀和O₃的精细化管理及协同治理。     

杭州市大气PM2.5和PM10污染特征及来源解析

2006年在杭州市两个环境受体点位采集不同季节大气中PM_2.5和PM₁₀样品,同时采集了多种颗粒物源类样品,分析了其质量浓度和多种化学成分,包括21种无机元素、5种无机水溶性离子以及有机碳和元素碳等,并据此构建了杭州市PM_2.5和PM₁₀的源与受体化学成分谱;用化学质量平衡(CMB)受体模型解析其来源。结果表明,杭州市PM_2.5和PM₁₀污染较严重,其年均浓度分别为77.5μg/m³和111.0μg/m³;各主要源类对PM_2.5的贡献率依次为机动车尾气尘21.6%、硫酸盐18.8%、煤烟尘16.7%、燃油尘10.2%、硝酸盐9.9%、土壤尘8.2%、建筑水泥尘4.0%、海盐粒子1.5%。各主要源类对PM₁₀贡献率依次为土壤尘17.0%、机动车尾气尘16.9%、硫酸盐14.3%、煤烟尘13.9%、硝酸盐粒8.2%、建筑水泥尘8.0%、燃油尘5.5%、海盐粒子3.4%、冶金尘3.2%。     

工业链条炉燃用型煤与原煤颗粒物排放特征

选取燃烧型煤和原煤的典型链条炉,应用自行设计的固定源烟气颗粒物稀释采样系统,现场测试细颗粒物PM_(2.5)、PM_(10)和金属元素的排放特征。结果表明,型煤燃烧细颗粒物的排放比例高于原煤,型煤燃烧除尘器进口、出口PM_(2.5)质量比原煤燃烧分别增加715%和708%。燃烧型煤时,As和Pb在各粒径段的质量比均比原煤大。同时,由于型煤燃烧可吸入颗粒物的排放比例增加,包含或附着在烟尘上的金属元素排放比例也相应增加。