Biosolids effects on phosphorus retention and release in some sandy Florida soils

The soil solid phase components most responsible for P sorption in Florida soils are Fe and Al oxides. Thus, we hypothesized that land application of biosolids would significantly increase a soil's P retention by increasing its content of P-sorbing solids, especially when biosolids with high Fe and Al concentrations are applied to soils that sorb P poorly. Biosolids effects were quantified by a series of single-point isotherms on soils from two field studies sampled for up to 4 yr after initial biosolids application. Biosolids additions had little effect on P retention in a soil with abundant oxalate-extractable Fe and Al and a correspondingly large native P-sorbing capacity. However, biosolids significantly increased P retention in a soil with low oxalate-extractable Fe and Al content and low native P-sorbing capacity. Biosolids effects on P retention lasted 1 to 3 yr after application, depending on biosolids source and rate of application, and generally mimicked persistence of increased extractable Fe and Al concentrations in the poorly P-sorbing soil. Disappearance of added Fe and Al (and, hence, P retention capacity) from the surface horizons over time was relatively rapid, perhaps due to abundant organic acid production associated with biosolids degradation. Phosphorus in biosolids containing (or tailored to contain) abundant Fe and/or Al can be expected to behave as a slowly available P source, and to be less subject to leaching losses than completely soluble P sources.     

A method for determining the phosphorus sorption capacity and amorphous aluminum of aluminum-based drinking water treatment residuals

A high amorphous aluminum or iron oxide content in drinking water treatment residuals (WTRs) can result in a high phosphorus (P) sorption capacity. Therefore, WTR may be used beneficially to adsorb P and reduce P loss to surface or ground water. The strong relationship between acid ammonium oxalate-extractable aluminum (Al(ox)) and Langmuir phosphorus adsorption maximum (P(max)) in WTR could provide a useful tool for determining P(max) without the onus of the multipoint batch equilibrations necessary for the Langmuir model. The objectives of this study were to evaluate and/or modify an acid ammonium oxalate extraction of Al(ox) and the experimental conditions used to generate P adsorption isotherms to strengthen the relationship between Al(ox) and P(max). The oxalate extraction solution to WTR ratio varied from 40:1, 100:1, and 200:1. Batch equilibration conditions were also varied. The WTR particle size was reduced from <2 mm to <150 microm, and batch equilibration was extended from 17 h to 6 d. Increasing the solution to WTR ratio to 100:1 extracted significantly greater Al(ox) at levels of >50 mg Al kg(-1). No additional increase was found at 200:1. Reducing WTR particle size from <2 mm to <150 microm increased P(max) 2.46-fold. Extending the equilibration time from 17 h to 6 d increased P(max) by a mean of 5.83-fold. The resulting empirical regression equation between the optimized Al(ox) and P(max) (r(2) = 0.91, significant at the 0.001 probability level) may provide a tool to estimate the P(max) of Al-based WTR simply by measuring Al(ox). The accurate determination of WTR P(max) and Al(ox) is essential in using WTR effectively to reduce P loss in runoff or to reduce the solubility of P in agricultural soils or organic waste materials (biosolids, manure).     

Phosphorus sorption by sediments in a southeastern coastal plain in-stream wetland

A close relationship has been reported between sediment organic C (SedOC) content and its P sorption capacity (P(max)) and total P (TP) concentration. Phosphorus sorbed to organically complexed cations is a proposed explanation for this relationship. The objectives of this study were (i) to determine relationships between in-stream wetland SedOC content and both the sediment's P(max) and TP concentrations, and (ii) to ascertain the role of both organically complexed and oxalate-extractable cations on the sediment P(max) and TP values. The sediment's oxalate-extractable Fe (Fe(ox)) and Al (Al(ox)) contents were determined using acidified ammonium oxalate, while sodium pyrophosphate was used to extract organically complexed cations (Al(pryo), Ca(pyro), Fe(pyro), Mg(pyro), and Mn(pyro)). Both the sediment's P(max) and TP contents were strongly correlated with its SedOC concentration (r(2) > 0.90, P < 0.001). Only the Al(ox) contents were significantly correlated with TP and P(max), suggesting that amorphous Al forms have an important role in P sorption. All five pyrophosphate-extracted cations were significantly correlated with SedOC contents. Regression analyses showed that the Al(pyro) accounted for 88% of the variation in sediment P(max) values, whereas a combination of Al(pyro) and Ca(pyro) accounted for 98% of the variation in sediment TP concentrations. Additionally, Al and Ca chelated by SedOC compounds also have an important role in P binding and indicate that a linkage exists between the wetlands SedOC and P(max) content and its ability to accumulate TP. This study identified that two different mechanisms have significant roles in regulating P sorption by sediments in a southeastern Coastal Plain in-stream wetland.     

A spatially explicit investigation of phosphorus sorption and related soil properties in two riparian wetlands

Soils of riparian wetlands are highly effective at phosphorus (P) sorption. However, these soils exhibit extreme spatial variability across riparian zones. We used a spatially explicit sampling design in two riparian wetlands in North Carolina to better understand the relationships among P sorption, soil properties, and spatial variability. Our objectives were to quantify patterns of spatial variability of P sorption and related soil properties, and to determine which soil properties best explained the variability in P sorption after accounting for the effects of spatial autocorrelation. We measured bulk density, moisture, pH, soil organic matter (SOM), texture (percent clay, silt, and sand), oxalate-extractable aluminum (Al(ox)), iron (Fe(ox)), and the phosphorus sorption index (PSI). Due to differences in texture, Al(ox), and Fe(ox), the two sites had substantially different mean PSIs. At each site, we found considerable differences in the spatial variability of soil properties. For example, semivariance analysis and kriging illustrated that soil properties at Site 1 varied at smaller scales than those at Site 2. At both sites, after accounting for the effects of spatial autocorrelation and all other soil properties, we determined that Al(ox) had the highest Mantel correlation with PSI. We believe this geostatistic and Mantel approach is robust and could serve as a model for research on other biogeochemical processes such as denitrification.     

Manure phosphorus extractability as affected by aluminum- and iron by-products and aerobic composting

Shifts in manure phosphorus (P) chemical forms and pool sizes induced by water treatment residuals and industrial mineral by-products are largely undefined. We conducted a manure P fractionation study to determine mechanisms of reduction of dissolved reactive phosphorus (DRP) in poultry manure upon mineral by-product additions. The effects of composting on the P immobilization efficacy of the by-products were determined using laboratory self-heating composting simulators. The mineral by-products included an aluminum-water treatment residual (Al-WTR) and an iron-rich titanium-processing by-product. The noncomposted manure averaged 0.11 g g(-1) of total P as DRP forms. The by-products significantly reduced manure DRP, by an average of 39 and 48% in the Al- and the Fe-treated manure, respectively. The by-products also reduced the 0.5 M NH4F-extractable phosphorus (FEP) fraction. Shifts in P forms between FEP and 0.1 M NaOH-extractable phosphorus (SHEP) depended upon the Al and Fe contents of the by-products while the combined FEP + SHEP pool remained constant. Phosphate sorption measurements supported the observations that the Fe-rich by-product was more effective at reducing manure DRP and enhancing the formation of SHEP forms at the expense of FEP than the Al-WTR. Composting had no effect on the efficacy of either by-product to reduce DRP. Potential mechanisms of enhanced P stabilization in treated manure upon composting included chemical shifts from the DRP and FEP fractions to the citrate-bicarbonate-dithionite extractable P fraction. Thus, the choice of P immobilization agents affected the stability of immobilized P forms and should be taken into consideration in developing manure processing and nutrient stabilization methods.     

Assessing effects of aerobic and anaerobic conditions on phosphorus sorption and retention capacity of water treatment residuals

Water treatment residuals (WTRs) are the by-products of drinking water clarification processes, whereby chemical flocculants such as alum or ferric chloride are added to raw water to remove suspended clay particles, organic matter and other materials and impurities. Previous studies have identified a strong phosphorus (P) fixing capacity of WTRs which has led to experimentation with their use as P-sorbing materials for controlling P discharges from agricultural and forestry land. However, the P-fixing capacity of WTRs and its capacity to retain sorbed P under anaerobic conditions have yet to be fully demonstrated, which is an issue that must be addressed for WTR field applications. This study therefore examined the capacity of WTRs to retain sorbed P and sorb further additional P from aqueous solution under both aerobic and anaerobic conditions. An innovative, low cost apparatus was constructed and successfully used to rapidly establish anoxic conditions in anaerobic treatments. The results showed that even in treatments with initial solution P concentrations set at 100 mg l(-1), soluble reactive P concentrations rapidly fell to negligible levels (due to sorption by WTRs), while total P (i.e. dissolved + particulate and colloidal P) was less than 3 mg l(-1). This equated to an added P retention rate of >98% regardless of anaerobic or aerobic status, indicating that WTRs are able to sorb and retain P in both aerobic and anaerobic conditions.     

Vertical distribution of phosphorus in agricultural drainage ditch soils

Pedological processes such as gleization and organic matter accumulation may affect the vertical distribution of P within agricultural drainage ditch soils. The objective of this study was to assess the vertical distribution of P as a function of horizonation in ditch soils at the University of Maryland Eastern Shore Research Farm in Princess Anne, Maryland. Twenty-one profiles were sampled from 10 agricultural ditches ranging in length from 225 to 550 m. Horizon samples were analyzed for total P; water-extractable P; Mehlich-3 P; acid ammonium oxalate-extractable P, Fe, and Al (P ox, Fe ox, Al ox); pH; and organic C (n = 126). Total P ranged from 27 to 4882 mg kg(-1), P ox from 4 to 4631 mg kg(-1), Mehlich-3 P from 2 to 401 mg kg(-1), and water-extractable P from 0 to 17 mg kg(-1). Soil-forming processes that result in differences between horizons had a strong relationship with various P fractions and P sorption capacity. Fibric organic horizons at the ditch soil surface had the greatest mean P ox, Fe ox, and Al ox concentrations of any horizon class. Gleyed A horizons had a mean Fe ox concentrations 2.6 times lower than dark A horizons and were significantly lower in total P and P ox. Variation in P due to organic matter accumulation and gleization provide critical insight into short- and long-term dynamics of P in ditch soils and should be accounted for when applying ditch management practices.     

Platinum (IV) recovery from chloride solution by functionalized acrylic copolymers

Two acrylic adsorbents with different morphological structures and bearing amidoethylenamine and thiol groups were obtained and used for platinum sorption from chloride solution by the batch method. Physico-chemical parameters that influence adsorption such as initial Pt(IV) concentration, stirring time, pH, and adsorbent amount were investigated. The thermodynamic parameters of Pt(IV) sorption on the synthesized adsorbent were also evaluated based on Langmuir and Freundlich isotherms. Thermodynamic parameters estimated from Langmuir constants indicated that the adsorption is spontaneous, exothermic and there is a disordered state at the molecular level. The models used to analyze the sorption rate led to the conclusion that the most important step in the sorption of Pt(IV) could be both particle diffusion and chemical reaction of [PtCl₆]⁻ with amine functional groups. Thus, both the ion exchange and complex formation mechanisms can occur via nitrogen atoms in the recovery of Pt(IV) on the studied adsorbent.     

Phosphorus removal in a wetland constructed on former arable land

Phosphorus in surface runoff water may cause eutrophication of recipient water. This study clarifies the mechanisms of P removal in the wetland of Hovi, Finland, constructed on arable land in 1998. Before the construction, the surface soil (removed in the construction) and subsoil (the current wetland bottom) were analyzed for Al and Fe oxides (Al(ox) and Fe(ox)) reactive in P sorption, and for the distribution of P between various pools as well as for P exchange properties. Retention of P from runoff water within the wetland was studied from 1999 to 2001 in situ and factors affecting the P removal (O2 availability and P concentration in water) were investigated in a laboratory microcosm. The processes taking place in the wetland diminished by 68% the total P load and by 49% the dissolved reactive P load. Desorption-sorption tests indicated that without removal of the surface soil, there would have been a risk of the wetland being a source of P, since the equilibrium P concentration of the soil removed was high compared with the mean P concentration of the inflowing water. The subsoil contained less P and high amounts of reactive oxides, which could bind P. Evidently, the P sorption by Al(ox) played an important role in a first phase removal of P, since the wetland retained P efficiently even under anoxic conditions, where Fe tends to be reduced. Fine-textured, mineral soil on the bottom of the wetland (subsoil of the former arable land) seemed to be very efficient in retaining P from agricultural runoff.     

Sorption of inorganic and total phosphorus from dairy and swine slurries to soil

Understanding P sorption from animal manures is essential to formulate best management practices with regard to land application of manure from the standpoint of crop production and environmental quality. Little research has focused on the construction of P sorption isotherms where the P source is manure. The objectives of this study were to: (i) develop a procedure to characterize how inorganic P (P(i)) and total P (P(t)) from dairy slurry and swine slurry sorbs to soil; and (ii) compare the sorption characteristics of P(i) and P(t) where the P source was dairy slurry, swine slurry, or potassium phosphate (KH2PO4). Sorption solutions were prepared in 0.1 M KCl at pH 6 and equilibrated with soils at a 1:25 (w/v) soil/solution ratio for 24 h. Inorganic P, P(t), Al, and Fe in the equilibrated solutions were measured. For all soils, P(i) and P(t) sorption capacity of dairy slurry was greater than KH2PO4. Total P sorption capacity of swine slurry was greater than KH2PO4, while P(i) sorption capacity was less than KH2PO4. Overall, P(i) and P(t) sorption strengths of the manure slurries were less than or equal to KH2PO4. Increased P(i) sorption from dairy slurry was correlated with Fe and Al desorption. Reduction of P(i) sorption capacity from swine slurry was related to preferential sorption of organic P. Additional studies need to be conducted to determine how differences in P sorption between manures and fertilizer impact in-field P availability to a crop and potential for losses in runoff water.     

Trapping phosphorus in runoff with a phosphorus removal structure

Reduction of phosphorus (P) inputs to surface waters may decrease eutrophication. Some researchers have proposed filtering dissolved P in runoff with P-sorptive byproducts in structures placed in hydrologically active areas with high soil P concentrations. The objectives of this study were to construct and monitor a P removal structure in a suburban watershed and test the ability of empirically developed flow-through equations to predict structure performance. Steel slag was used as the P sorption material in the P removal structure. Water samples were collected before and after the structure using automatic samples and analyzed for total dissolved P. During the first 5 mo of structure operation, 25% of all dissolved P was removed from rainfall and irrigation events. Phosphorus was removed more efficiently during low flow rate irrigation events with a high retention time than during high flow rate rainfall events with a low retention time. The six largest flow events occurred during storm flow and accounted for 75% of the P entering the structure and 54% of the P removed by the structure. Flow-through equations developed for predicting structure performance produced reasonable estimates of structure "lifetime" (16.8 mo). However, the equations overpredicted cumulative P removal. This was likely due to differences in pH, total Ca and Fe, and alkalinity between the slag used in the structure and the slag used for model development. This suggests the need for an overall model that can predict structure performance based on individual material properties.     

Atrazine sorption-desorption hysteresis by sugarcane mulch residue

Sorption and desorption kinetics are essential components for modeling the movement and retention of applied agricultural chemicals in soils and the fraction of chemicals susceptible to runoff. In this study, we investigated the retention characteristics of sugarcane (Saccharum spp. hybrid) mulch residue for atrazine (2-chloro-4-ethylamino-6-isopropylamino-1,3,5-triazine) based on studies of sorption-desorption kinetics. A sorption kinetic batch method was used to quantify retention of the mulch residue for a wide range of atrazine concentrations and reaction times. Desorption was performed following 504 h of sorption using successive dilutions, followed by methanol extraction. Atrazine retention by the mulch residue was well described using a linear model where the partitioning coefficient (K(d)) increased with reaction time from 10.40 to 23.4 cm3 g(-1) after 2 and 504 h, respectively. Values for mulch residue K(d) were an order of magnitude higher than those found for Commerce silt loam (fine-silty, mixed, superactive, nonacid, thermic Fluvaquentic Endoaquepts) where the sugarcane crop was grown. A kinetic multireaction model was successful in describing sorption behavior with reaction time. The model was equally successful in describing observed hysteretic atrazine behavior during desorption for all input concentrations. The model was concentration independent where one set of model parameters, which was derived from all batch results, was valid for the entire atrazine concentration range. Average atrazine recovery following six successive desorption steps were 63.67 +/- 4.38% of the amount adsorbed. Moreover, a hysteresis coefficient based on the difference in the area between sorption and desorption isotherms was capable of quantifying hysteresis of desorption isotherms.     

Estimating soil phosphorus requirements and limits from oxalate extract data

Excessive fertilizer and manure phosphorus (P) inputs to soils elevates P in soil solution and surface runoff, which can lead to freshwater eutrophication. Runoff P can be related to soil test P and P sorption saturation, but these approaches are restricted to a limited range of soil types or are difficult to determine on a routine basis. The purpose of this study was to determine whether easily measurable soil characteristics were related to the soil phosphorus requirements (P(req), the amount of P sorbed at a particular solution P level). The P(req) was determined for 18 chemically diverse soils from sorption isotherm data (corrected for native sorbed P) and was found to be highly correlated to the sum of oxalate-extractable Al and Fe (R2 > 0.90). Native sorbed P, also determined from oxalate extraction, was subtracted from the P(req) to determine soil phosphorus limits (PL, the amount of P that can be added to soil to reach P(req)). Using this approach, the PL to reach 0.2 mg P L(-1) in solution ranged between -92 and 253 mg P kg(-1). Negative values identified soils with surplus P, while positive values showed soils with P deficiency. The results showed that P, Al, and Fe in oxalate extracts of soils held promise for determining PL to reach up to 10 mg P L(-1) in solution (leading to potential runoff from many soils). The soil oxalate extraction test could be integrated into existing best management practices for improving soil fertility and protecting water quality.     

Phosphorus in Hawaiian kikuyugrass pastures and potential phosphorus release to water

Pasture systems in Hawaii are based primarily on kikuyugrass (Pennisetum clandestinum Hochst. ex Chiov.). Relationships among kikuyugrass P concentration, animal P requirements, and various soil P determinations are needed to help identify source areas for implementing pasture management strategies to limit P loss via overland flow. A total of 51 rotationally stocked kikuyugrass pastures (>20 yr old) with contrasting soil chemical properties were sampled. A satisfactory predictive relationship between modified-Truog (MT)-extractable phosphorus (P(MT)) and dissolved (<0.45-mum pore diameter), molybdate-reactive phosphorus (DRP) desorbed from soil in a water extract (DRP(WE)) was found when 0- to 4-cm-depth data for the soil orders with medium to high DRP(WE) (two Mollisols and an Inceptisol) were pooled separately from those with low DRP(WE) (five Andisols, three Ultisols, and an Oxisol). The oxalate phosphorus saturation index (PSI(ox)) procedure was the best predictor of DRP(WE) across soil orders when oxalate-extractable molybdate-reactive phosphorus (RP(ox)) was used to calculate PSI(ox) (PSI(ox)RP) rather than when total oxalate-extractable phosphorus (TP(ox)) was used (PSI(ox)TP). There was little DRP(WE) until PSI(ox)RP exceeded 6% or PSI(ox)TP exceeded 8%. A more empirical dilute-acid phosphorus saturation index (PSI(MT)) was also calculated using P(MT) and MT-extractable iron (Fe(MT)) and aluminum (Al(MT)). The PSI(MT) procedure showed some utility in predicting DRP(WE), was positively related to the PSI(ox) procedures, and can be more readily performed in agronomic soil testing laboratories than PSI(ox). The present research suggests that while Hawaiian kikuyugrass pastures tend to be sufficient to high in forage P, potential soil P release to water only appeared to be a possible environmental concern for the Mollisol and Inceptisol sites.     

Relationship between soil test phosphorus and phosphorus in runoff: effects of soil series variability

Phosphorus loss in runoff from agricultural fields has been identified as an important contributor to eutrophication. The objective of this research was to determine the relationship between phosphorus (P) in runoff from a benchmark soil (Cecil sandy loam; fine, kaolinitic, thermic Typic Kanhapludult) and Mehlich III-, deionized water-, and Fe(2)O(3)-extractable soil P, and degree of phosphorus saturation (DPS). Additionally, the value of including other soil properties in P loss prediction equations was evaluated. Simulated rainfall was applied (75 mm h(-1)) to 54 1-m(2) plots installed on six fields with different soil test phosphorus (STP) levels. Runoff was collected in its entirety for 30 min and analyzed for total P and dissolved reactive phosphorus (DRP). Soil samples were collected from 0- to 2-, 0- to 5-, and 0- to 10-cm depths. The strongest correlation for total P and DRP occurred with DPS (r(2) = 0.72). Normalizing DRP by runoff depth resulted in improved correlation with deionized water-extractable P for the 0- to 10-cm sampling depth (r(2) = 0.81). The STP levels were not different among sampling depths and analysis of the regression equations revealed that soil sampling depth had no effect on the relationship between STP and P in runoff. For all forms of P in runoff and STP measures, the relationship between STP and runoff P was much stronger when the data were split into groups based on the ratio of oxalate-extractable Fe to Al. For all forms of P in runoff and all STP methods, R(2) increased with the inclusion of oxalate-extractable Al and Fe in the regression equation. The results of this study indicate that inclusion of site-specific information about soil Al and Fe content can improve the relationship between STP and runoff P.     

Utilization of coal combustion by-products in sustainable construction materials

Solid waste management is gaining significant importance with the ever-increasing quantities of industrial by-products and wastes. With the environmental awareness and scarcity of space for landfilling, wastes/by-product utilization has become an attractive alternative to disposal. Several industrial by-products are produced from manufacturing processes, service industries and municipal solid wastes. Some of these industrial by-products/waste materials could possibility be used in cement-based materials.Coal combustion by-products (CCBs) represent incombustible materials left after combustion of coal in conventional and/or advanced clean-coal technology combustors. These include fly ash, bottom ash, boiler slag, and flue gas desulfurization (FGD) by-products from advanced clean-coal technology combustors. This paper briefly describes various coal combustion products produced, as well as current best recycling use options for these materials. Materials, productions, properties, potential applications in manufacture of emerging materials for sustainable construction, as well as environmental impact are also briefly discussed.     

Influence of water treatment residuals on phosphorus solubility and leaching

Laboratory and greenhouse studies compared the ability of water treatment residuals (WTRs) to alter P solubility and leaching in Immokalee sandy soil (sandy, siliceous, hyperthermic Arenic Alaquod) amended with biosolids and triple superphosphate (TSP). Aluminum sulfate (Al-WTR) and ferric sulfate (Fe-WTR) coagulation residuals, a lime softening residual (Ca-WTR) produced during hardness removal, and pure hematite were examined. In equilibration studies, the ability to reduce soluble P followed the order Al-WTR > Ca-WTR = Fe-WTR > hematite. Differences in the P-fixing capacity of the sesquioxide-dominated materials (Al-WTR, Fe-WTR, hematite) were attributed to their varying reactive Fe- and Al-hydrous oxide contents as measured by oxalate extraction. Leachate P was monitored from greenhouse columns where bahiagrass (Paspalum notatum Flugge) was grown on Immokalee soil amended with biosolids or TSP at an equivalent rate of 224 kg P ha(-1) and WTRs at 2.5% (56 Mg ha(-1)). In the absence of WTRs, 21% of TSP and 11% of Largo cake biosolids total phosphorus (PT) leached over 4 mo. With co-applied WTRs, losses from TSP columns were reduced to 3.5% (Fe-WTR), 2.5% (Ca-WTR), and <1% (Al-WTR) of applied P. For the Largo biosolids treatments all WTRs retarded downward P flux such that leachate P was not statistically different than for control (soil only) columns. The phosphorus saturation index (PSI = [Pox]/ [Al(ox) + Fe(ox)], where Pox, Al, and Fe(ox) are oxalate-extractable P, Al, and Fe, respectively) based on a simple oxalate extraction of the WTR and biosolids is potentially useful for determining WTR application rates for controlled reduction of P in drainage when biosolids are applied to low P-sorbing soils.     

Sorption, mobility, and transformation of estrogenic hormones in natural soil

Potent estrogenic hormones are consistently detected in the environment at low concentration, yet these chemicals are strongly sorbed to soil and are labile. The objective of this research was to improve the understanding of the processes of sorption, mobility, and transformation for estrogens in natural soils, and their interaction. Equilibrium and kinetic batch sorption experiments, and a long-term column study were used to study the fate and transport of 17beta-estradiol and its primary metabolite, estrone, in natural soil. Kinetic and equilibrium batch experiments were done using radiolabeled 17beta-estradiol and estrone. At the concentrations used, it appeared that equilibrium sorption for both estrogens was achieved between 5 and 24 h, and that the equilibrium sorption isotherms were linear. The log K(oc) values for 17beta-estradiol (2.94) and estrone (2.99) were consistent with previously reported values. Additionally, it was found that there was rate-limited sorption for both 17beta-estradiol (0.178 h(-1)) and estrone (0.210 h(-1)). An approximately 42 h long, steady-flow, saturated column experiment was used to study the transport of radiolabeled 17beta-estradiol, which was applied in a 5.00 mg L(-1) solution pulse for 44 pore volumes. 17beta-estradiol and estrone were the predominant compounds detected in the effluent. The effluent breakthrough curves were asymmetric and the transport modeling indicated that sorption was rate-limited. Sorption rates and distributions of the estrogens were in agreement between column and batch experiments. This research can provide a better link between the laboratory results and observations in the natural environment.     

Treatment of drainage water with industrial by-products to prevent phosphorus loss from tile-drained land

Tile drained land with phosphorus (P)-rich topsoil is prone to P loss, which can impair surface water quality via eutrophication. We used by-products from steel and energy industries to mitigate P loss from tile drains. For each by-product, P sorption maximum (P(max)) and strength (k) were determined, while a fluvarium trial assessed P uptake with flow rate. Although two ash materials (fly ash and bottom ash) had high P(max) and k values, heavy metal concentrations negated their use in the field. The fluvarium experiment determined that P uptake with by-products was best at low flow, but decreased at higher flow in proportion to k. A mixture of melter slag (<10 mm) and basic slag (high P(max), 7250 mg kg(-1); and k, 0.508 L mg P(-1)) was installed as backfill in eight drains on a dairy farm. Four drains with greywacke as backfill were constructed for controls. The site (10 ha) had P-rich topsoil (Olsen P of 64 mg kg(-1)) and yielded a mean dissolved reactive P (DRP) and total P (TP) concentration from greywacke backfilled drains of 0.33 and 1.20 mg L(-1), respectively. In contrast, slag backfilled drains had DRP and TP concentrations of 0.09 and 0.36 mg L(-1), respectively. Loads of DRP and TP in greywacke drains (0.45 and 1.92, respectively) were significantly greater (P < 0.05) than those from slag drains (0.18 and 0.85, respectively). Data from a farm where melter slag was used as a backfill suggested that slag would have a life expectancy of about 25 yr. Thus, backfilling tile drains with melter slag and a small proportion of basic slag is recommended as an effective means of decreasing P loss from high P soils.     

Site-specific phosphorus application based on the kriging fertilizer-phosphorus availability index of soils

Site-specific phosphorus management is done to optimize crop production and minimize P loss from soils. The spatial variability of the available P prior to fertilizer application and the P-fixation tendency of soil both need to be taken into account for variable-rate P application. The objectives of this research were to document the spatial variability of the fertilizer-P availability index, which shows the P-fixation tendency, and to develop a strategy that takes the spatial distribution of this index into account for site-specific phosphorus application. In this study, the spatial patterns of the fertilizer-P availability index were characterized by using geostatistics. The ordinary kriging was used for spatial interpolation of the fertilizer-P availability index. Because the fertilizer-P availability index of soil is related to oxalate-extractable Fe and Al and because measuring oxalate-extractable Fe and Al is much easier than directly determining the fertilizer-P availability index, the spatial distribution of the fertilizer-P availability index can be obtained using the oxalate-extractable Fe and Al data. The spatial distribution of Olsen-extractable P, which was used to measure the available-P status prior to fertilizer-P application, was also estimated by using ordinary kriging. The required fertilizer-P amounts were then determined using the kriging estimates of the fertilizer-P availability index and Olsen-extractable P. A fertilizer-P recommendation map for the 430-ha study site in Changhua county, Taiwan was generated by using this approach for illustration. The proposed method for generating fertilizer-P recommendation maps can be used for variable-rate application to maintain an adequate P status for crop production and to potentially reduce the P loss from soils.