咸宁市桂花旅游资源开发利用研究

根据对咸宁市桂花旅游资源开发利用条件的分析评价,提出咸宁市旅游业的发展应以开发其特有的优势资源“桂花”为先导,并结合其它旅游资源的开发配置,逐步形成集桂花观赏、文化、娱乐、科研、生态及商品生产为一体的桂花旅游资源发展模式。     

试论四川省草地资源开发利用与可持续发展

四川省草地资源丰富,是我国五大牧区之一。本文从可持续发展理论对草地资源开发利用的指导作用、草地资源在开发利用中存在的主要问题以及如何实现草地资源开发利用的可持续发展进行了探讨     

资源开发利用的环境经济学分析

资源开发利用产生的环境问题作为资源产业发展中的负产品，已成为资源产业能否可持续发展的关键。本文运用经济学理论，通过对资源开发利用地区环境容量和资源开发利用经济行为的分析，指出资源开发利用环境问题的实质是外部不经济性。为了实现在生态环境不被破坏的前提下资源开发利用经济效益最大化，需主动进行环境治理并取适当的经济手段。     

武汉市桂花品种资源及其利用

武汉市桂花品种资源及其利用姚崇怀，王彩云（华中农业大学林学系，武汉４３００７０）桂花（ＯｓｍａｎｔｈｕｓｆｒａｇｒａｎｓＬｏｕｒ）属木犀科（Ｏｌｅａｃｅａｅ）木犀属（Ｏｓｍａｎｔｈｕｓ）［１］，为原产我国的著名观赏花木，其树形端庄优雅，姿态秀美，枝叶...     

安徽野生动物资源及其开发利用与保护

安徽省自然条件优越,野生动物资源丰富,但在资源的开发利用上存在不少问题。只有在科学研究的基础上,把资源的开发利用与保护有机地结合起来,才能实现野生动物资源的永续利用。     

烟台市土地资源开发利用对策

根据烟台市土地资源利用现状,中文分析了烟台市土地资源在开发利用中存在的主要问题,提出了开发利用对策。     

宁夏苦豆子资源的保护及其开发利用

通过对宁夏地区苦豆子的资源调查和生物特性分析,提出了苦豆子资源的保护和开发利用对策,为宁夏野生苦豆子资源的保护和开发利用提供重要依据.     

曲阜市文化旅游资源及其开发利用

文化旅游资源是曲阜市的优势资源，文在分析其文化旅游资源特点和开发利用的区内外环境条件的基础上，提出了曲阜市文化旅游资源开发利用的基本战略。     

难溶性钾矿资源的开发利用

本文根据我国钾肥紧缺和天然难溶性钾矿资源状况,论述了几种主要难溶性钾矿资源的开发利用途径、方法和工艺,以阐明我国难溶性钾肥资源开发利用的可行性和重要性     

贵州省能源资源评价

本文通过对能源资源的综合分析评价，揭示了贵州省能源资源的基本特点和开发利用的有利条件，并分别探讨了煤炭和水能资源的开发利用问题。     

获取NEBS认证的“3P”阶段

NEBS认证，是电信网络设备进入北美地区电信网络的通行证。本文把获取NEBS认证的全过程划分为三个阶段，即准备阶段、设计阶段和实施阶段，并论述了各阶段的关键要点。首先，在准备阶段对NEBS进行了介绍，简要分析了NEBS认证的主要标准，同时指出运营商的特殊要求的重要性。接着分析了在设计阶段应该注意的技术点，如空间尺寸要求、电源输入、接地、防火、地震等。最后，讨论了认证测试阶段面临的困难，并强调了认证前摸底测试的重要性及必须具备足够的耐心。     

固液分离法处理废钻井液的实验研究

废钻井液对环境的污染是一个难以解决的问题。针对塔里木油田的地质情况,使用固液分离法对部分废钻井液样品进行了实验研究工作。固液分离法采用两次处理工艺流程。即先经一级初步絮凝处理和强化离心分离,使大部分固相去除,然后对脱出的废液进行第二级絮凝处理后即可达到排放要求。实验结果表明：固液分离法能够将废钻井液分离成固-液两相,其液相能够达到排放要求,固相残渣对环境污染程度大幅度降低甚至无污染;若将此处理法同其它方法相结合,如坑内密封法、固化法等相结合会得到更满意的环保效果。     

基于GM(1,1)的芜湖市人均农用地生态足迹变化研究

应用Wackernagel等提出的生态足迹方法,对芜湖市1996—2005年的人均农用地生态足迹、人均农用地生态承载力和生态赤字进行了计算;利用灰色系统预测模型建立了芜湖市人均生态足迹、生态承载力预测模型GM(1,1),经求解、检验、预测,可得到今后数年该市人均农用地生态足迹、生态承载力数据,并对灰色系统模型应用于生态足迹的预测作了可行性分析。结果显示,未来5年该区域的人均农用地生态足迹呈逐渐增大、人均农用地生态承载力呈逐渐下降的趋势,人均生态赤字也逐渐增大。     

Performance and stability of an anaerobic fixed bed reactor subjected to progressive increasing concentrations of influent organic matter and organic shock loads

Data on the performance of a horizontal-flow anaerobic immobilized biomass (HAIB) reactor subjected to step increases of organic loading rates (OLR) and to organic shock loads (OSL) are presented and discussed. The tubular reactor (100 cm long and 5 cm diameter) with a useful volume of 1995 mL was filled with polyurethane foam cubic matrices holding immobilized biomass and fed with synthetic wastewater. The reactor was operated at the controlled temperature of 30+/-1 degrees C and hydraulic retention time of 7 h. After about 15 days, the HAIB reactor attained operating stability. Thereafter, it was subjected to step increases of the applied OLR that ranged from 6.8 to 18.8 kg COD/m(3)d. After steady state had been achieved at each step, OSL corresponding to approximately three times the operating OLR were applied for 7 h. No disturbance was observed due to the step increase in OLR. An increase in effluent chemical oxygen demand (COD) and volatile fatty acids (VFA) concentrations and a decrease in the percentage of methane in the biogas were observed due to OSL applications. However, stability of the monitoring parameters was always restored approximately 17 h after the application of OSL for all conditions tested.     

Utilization of UV‐A and UV‐C radiation in advanced oxidation processes with the intention of removing color and organic matter from the gross leachate of a stabilized sanitary landfill

The present work investigated color and biochemical oxygen demand (COD) removal from treated landfill leachate via advanced oxidative processes (AOPs) artificially emitted. The AOP H₂O₂/UV, TiO₂/UV, and photolysis were tested in two bench‐scale photoreactors: The first one with UV‐C lamp and the other with UV‐A lamp associated or not with coagulation / flocculation pretreatment. Crude leachate samples with pH ranging from 8 to 3 were used, and time varied in 30, 45, and 60 minutes. Experiments were performed in two stages: step 1 with a 20 mL volume from each sample and step 2 with repetition of the best results from the previous step, adopting the 150 mL volume. In step 1, the AOP applied in the crude leachate sample showed the best results, standing out H₂O₂/UV‐C with 30 minutes and TiO₂/UV‐A with 60 minutes. In step 2, H₂O₂/UV‐C had a 60% color removal and 25% COD reduction, while TiO₂/UV‐A had a 10% color removal and 20% COD reduction. Therefore, the H₂O₂/UV‐C process was the most efficient, because the complex characteristics of the effluent interfered in the TiO₂/UV‐A efficiency, but it is necessary to eliminate the process interferences. The use of artificial radiation is a viable alternative; however, it can be costly, being relevant in the associations between processes with artificial UV and solar UV, as the natural radiation becomes more attractive and allows the process operating costs reduction.     

Managing environmental knowledge through unlearning in Spanish hospitality companies

The Spanish hospitality industry is facing environmental challenges which require organizations and individuals to learn new skills and practices and create new environmental knowledge. Understanding the nature and role of prior knowledge for sustainable development is a necessary step towards understanding if new environmental practices will be adopted successfully. This research focuses on unlearning and its impact on environmental knowledge by carrying out an empirical investigation of the unlearning context in 127 Spanish hospitality companies. The findings indicate that a process for consolidating emergent understandings would appear to be an intermediary step between the forgetting of old knowledge and the application of new environmental knowledge. Consequently, it is important that managers provide an appropriate unlearning context to support the openness of individuals to new ideas and environmental awareness. Otherwise, individuals may be fearful of or confused by the prospect of unlearning old habits and routines.     

谈谈高加速寿命试验

高加速寿命试验（HALT）是一种新兴技术，它使用在产品的设计阶段，用于快速暴露产品的缺陷和薄弱环节。本文介绍了HALT的优点，典型的HALT过程及HAST项目；对HAST项目中的温度步进应力，6自由度随机振动，快速温度变换，温度与振动综合试验等方法进行了详细描述。     

Carbon footprint in corporate logistics operations in the food sector

Global warming is negatively affecting the environment of the planet. This situation has led to the development of international standards, such as the International Organisation for Standardization's DIS 14064‐1 and the Greenhouse Gas Protocol Corporate Standard, both of which measure corporate carbon footprints. These standards provide guidelines that can be applied to different organizational sectors. However, these are not sufficient for controlling the reduction of carbon emissions, because although they propose the use of indicators, they do not explicitly define them. In addition, in the case of emissions from wastewater treatment, they only suggest that the emissions associated with this process be considered. In the present study, an eight‐step, unified methodology based on these two international standards is proposed, focusing on direct emissions. Moreover, the step‐by‐step to data collection, calculations, and the required indicators to control the emissions are defined. The first scope considers direct emissions from sources that are owned or controlled by the company. Methane generation measurement from wastewater treatment has been included in the methodology within Scope 1, as it is the second most polluting gas after carbon dioxide, both of which give rise to global warming. The proposed methodology was tested as a case study in one of the most important companies in the food sector in Colombia.     

Improving anaerobic sewage sludge digestion by implementation of a hyper-thermophilic prehydrolysis step

The present study focuses on a two-step process for treatment and stabilisation of primary sludge. The process consists of a hyper-thermophilic hydrolysis step operated at 70 degrees C and a hydraulic retention time (HRT) of 2 days followed by a thermophilic (55 degrees C) anaerobic digestion step at a HRT of 13 days. A one-step anaerobic digester operated at 55 degrees C and 15 days HRT was used as a reference process. The two-step process was characterized by a 12% higher organic suspended solids removal efficiency and better pathogen reduction effect than the conventional one-step digestion. The microbial community of the digester fed with pre-treated sludge was characterised by a higher activity compared to that of the digester treating raw sludge. Moreover, the pre-treatment of the primary sludge resulted up to 48% increase of the methane potential (20.09 and 13.56mmolCH(4)g(-)VS(-1) with and without pre-treatment, respectively) and up to 115% increase of the methane production rate. Finally it was shown that the extra energy requirements for the operation of a pre-treatment step would be covered by the energy produced from the extra methane production and in addition there would be a significant energy surplus of 2.17kJd(-1) for the system tested.     

标准溶液直读法标定电导电极常数的探讨

目前电导率测定在实验室是一个十分普遍而重要的项目,标定电极常数的方法有直接测定法和比较测定法。在直接测定法的基础上,针对现代数显电导仪的特点,设计了标准溶液直读法标定电极常数,绕过了标定过程中需要测定电导G(电阻)的步骤。该方法直观易懂,操作简单,不需要计算,省时省力,适用于所有需要调节并能读出该电极常数的电导率仪。