Comparison of leaching tests for the study of trace metals remobilisation in soils and sediments

Several leaching tests were applied and compared to study metal remobilisation on various unpolluted and contaminated soils and on several contaminated sediments. The trace elements considered were Cd, Cr, Cu, Ni, Pb and Zn, and leaching tests consisted of the application of reagents with contrasting characteristics and strengths in order to assess the information provided. An extraction with aqua regia permitted the estimation of the pseudo-total metal content in the sample. Mild extractants such as H2O, CaCl2 and NaNO3 showed low and similar leaching capacities. Acid (CH3COOH) and complexing (EDTA) agents were more effective in remobilising trace metals from soils and sediments. Cd and Zn showed similar extraction characteristics under both extractant solutions, whereas Cu and Pb were more sensitive to complexation, and Ni and Cr to acidification processes. Sequential chemical extractions provided additional information on the association of the trace elements with the different soil and sediment phases. Cd and Zn showed the highest mobility, Pb was associated to reducible solid phases, Cu and Ni to oxidisable phases, and Cr remained mostly in the residual fraction. The results obtained in this paper provided valuable information for choosing a leaching test, which is an instrument of environmental analysis for the estimation of trace metal mobility.     

Assessment of the effects of Cr, Cu, Ni and Pb soil contamination by ecotoxicological tests

This study aimed to assess soil quality by chemical and ecotoxicological investigations and to check the correspondence between soil metal concentrations and ecotoxicity. For these purposes, surface soils collected at four adjacent roadside urban parks and at a former industrial area were characterized for C/N, organic matter content, texture, and pH. Cr, Cu, Ni and Pb, chosen among the most representative soil metal contaminants, were measured as total content and as available and water soluble fractions. In addition, the total concentrations of the investigated metals were used to calculate two chemical indices: the contamination and the potential ecological risk factors. The toxicity of the investigated soils was evaluated by an ecotoxicity test battery carried out on both soil samples (Vibrio fischeri, Heterocypris incongruens and Sinapis alba) and elutriates (Vibrio fischeri, Daphnia magna and Selenastrum capricornutum). The findings, both by the chemical and ecotoxicological approaches, would suggest that the soils with high metal contamination pose ecological risks. On the other hand, moderately metal contaminated soils did not exclude soil ecotoxicity. In fact, toxic effects were also highlighted in soils with low metal content, toxicity being affected by metal availability and soil characteristics. Moreover, the results suggest the importance of using a battery of tests to assess soil ecotoxicity.     

Secondary mobilisation of heavy metals in overbank sediments

Heavy metal mobility was studied in overbank sediments of the Grote Beek river in Central Belgium. The geochemical signature of heavy metals in fine-scale sampled overbank sediments was compared with data on heavy metal emission into the river. The influence of acidification, organic and inorganic complexation on heavy metal mobility in overbank sediments was studied by single and sequential extractions and leaching tests. As confirmed by these tests, the elevated CaCl(2) content of the river water significantly enhanced the mobilisation of especially Cd, while Zn was mobilised to a lesser extent. The mobilisation of As on the other hand decreased in the presence of elevated CaCl(2) concentrations. Based on the results of single extractions, two highly contaminated zones with a different Cd mobility were observed in one of the overbank profiles. A detailed investigation of Cd leaching behaviour in the zone of Fe-accumulation during pH(stat) leaching tests, suggested that it was related to the association of Cd with Fe-oxides, while adsorption was the dominant binding form of Cd in the clay-rich part of the overbank sediment profile.     

Organic and inorganic diffuse contamination in urban soils: the case of Torino (Italy)

Soils in urban parks are useful tracers of diffuse contamination and could represent a potential health risk for citizens. Soils in the parks of Torino, Italy, were sampled and analysed for a broad range of organic and inorganic contaminants. Concentrations of potentially toxic elements, PAHs, PCBs and polychlorinated dibenzo-p-dioxins and dibenzofurans were often above national legislation limits, and higher than surrounding rural areas or than other cities. Mean concentrations were 233 mg kg(-1) for Cr, 164 mg kg(-1) for Ni, 124 mg kg(-1) for Pb and 170 mg kg(-1) for Zn. Other inorganic contaminants such as Cd, As, and Hg showed high concentrations in some soils. Organic contaminants were also found to be enriched in the sampled parks (e.g. maximum concentrations of PCDDs/DFs and PCBs were 12.6 ng kg(-1) and 0.310 mg kg(-1), respectively). Data from this study reveal an important enrichment of parks for some contaminants, reflecting the intensity of phenomena of diffuse contamination. Historical parks presented the highest degree of contamination, suggesting that the age of soils rather than their proximity to sources of emissions is a key factor in determining soil contamination. Data obtained in this study could be of help in the investigation and remediation practices of urban contaminated sites within large cities.     

Evaluating the Applicability of Regulatory Leaching Tests for Assessing Lead Leachability in Contaminated Shooting Range Soils

The toxicity characteristic leaching procedure (TCLP) is the current US-EPA standard protocol to evaluate metal leachability in wastes and contaminated soils. However, application of TCLP to assess lead (Pb) leachability from contaminated shooting range soils may be questionable. This study determined Pb leachability in the range soils using TCLP and another US-EPA regulatory leaching method, synthetic precipitation leaching procedure (SPLP). Possible mechanisms that are responsible for Pb leaching in each leaching protocol were elucidated via X-ray diffraction (XRD). Soil samples were collected from the backstop berms at four shooting ranges, with Pb concentrations ranging from 5,000 to 60,600 mg kg⁻¹ soil. Lead concentrations in the TCLP leachates were from 3 to 350 mg l⁻¹, with all but one soil exceeding the USEPA non-hazardous waste disposal limit of 5 mg l⁻¹. However, continued dissolution of metallic Pb particles from spent Pb bullets and its re-precipitation as cerussite (PbCO₃) prevented the TCLP extraction from reaching equilibrium at the end of the standard leaching period (18 h). Thus, the standard one-point TCLP test would either over- or under-estimate Pb leachability in shooting range soils. Lead concentration in the SPLP leachates ranged from 0.021 to 2.6 mg l⁻¹, with all soils above the USEPA regulatory limit of 0.015 mg l⁻¹. In contrast to TCLP, SPLP leaching had reached equilibrium, with regard to both pH and Pb concentrations, within the standard 18 h leaching period, and the analytical SPLP results were in good agreement with those derived from modeling. Thus, we concluded that SPLP is a more appropriate alternative than TCLP for assessing lead leachability in range soils.     

Foliar concentrations of volunteer willows growing on polluted sediment-derived sites versus sites with baseline contamination levels

Many alluvial soils along navigable waterways are affected by disposal of dredged sediments or overbank sedimentation and contain metal concentrations that are elevated compared to baseline levels. Uptake patterns for metals and other elements by several volunteer Salix species growing on these sites were determined during a growing season in field plots and compared with the same species growing on soils with baseline contamination levels. For Cd and Zn, foliar concentrations were clearly higher on dredged sediment landfills. Uptake patterns differed significantly between species. A high uptake of Mn and low uptake of Cu, K and S in S. cinerea was attributed to wetland soil chemistry. Site effects on metal uptake were evaluated in more detail for Salix cinerea and S. alba growing on different sediment-derived sites under field conditions. Foliar Cd concentrations were higher in S. cinerea than in S. alba. This appeared to be a genetic feature not influenced by soil chemical properties, as it was observed both on clean sites and polluted sediment-derived sites. For S. cinerea, soil chemistry was reflected in foliar concentrations, while foliar Cd concentrations and bioavailability were found to be independent of the thickness of the polluted horizon. Dredged sediment landfills and freshwater tidal marshes with comparable Cd soil pollution had significantly different foliar Cd concentrations.     

Geochemical characterization and biomonitoring of reclaimed soils in the Po River Delta (Northern Italy): implications for the agricultural activities

This geochemical study is focused on the easternmost part of the Po River alluvial plain in Northern Italy, which is interested by widespread agricultural activities, investigating a reclaimed sector of the Province of Ferrara, known as “Valle del Mezzano” (Mezzano Low Land, hereafter reported as MLL) characterized by peat-rich soils. The chemical–mineralogical characterization of these reclaimed soils is important to compare the local geochemical backgrounds with those recorded in other sectors of the River Po plain and to monitor if the observed concentration exceeds critical thresholds. The reported analyses include (a) measurement of the soil salinity, (b) nutrient evaluation, (c) major and trace element concentrations carried out on bulk soils, (d) tests of metal extraction with both aqua regia and EDTA to highlight the distinct elemental mobility and (e) phyto-toxicological measurement of heavy metal concentrations in plants (Lactuca sativa acephala) grown on the studied soils. The results indicate (1) high soil salinity, often with drastic increase of sodium and chloride along the soil profiles, (2) high nitrogen content (in part related to anthropogenic activities) on superficial horizons and nitrate decrease along the soil profiles and (3) comparative enrichments in heavy metals with respect to other soils of the province, which indicate that peat deposits are effective in trapping metals from anthropogenic sources. This, in turn, implies potential geochemical risks for the agricultural activities. In this regard, specific concerns are related to the high nickel and arsenic content of MLL soils due to the mobility of these elements and their attitude to be taken up by plants.     

Petroleum contaminated soil in Oman: Evaluation of bioremediation treatment and potential for reuse in hot asphalt mix concrete

This paper presents a study that aims at evaluating the leaching characteristics of petroleum contaminated soils as well as their application in hot mix asphalt concrete. Soil samples are environmentally characterized in terms of their total heavy metals and hydrocarbon compounds and leachability. The total petroleum hydrocarbon (TPH) present in the PCS before and after treatment was determined to be 6.8% and 5.3% by dry weight, indicating a reduction of 1% in the TPH of PCS due to the current treatment employed. Results of the total heavy metal analysis on soils indicate that the concentrations of heavy metals are lower when extraction of the soil samples is carried out using hexane in comparison to TCE. The results show that the clean soils present in the vicinity of contaminated sites contain heavy metals in the following decreasing order: nickel (Ni), followed by chromium (Cr), zinc (Zn), copper (Cu), lead (Pb), and vanadium (V). The current treatment practice employed for remediation of the contaminated soil reduces the concentrations of nickel and chromium, but increases the concentrations of all remaining heavy metals.     

生态修复后某矿区下游农田土壤金属污染特征与风险评价

为研究广东省某矿区开展生态修复多年后下游农田土壤的金属污染状况，选取该矿区下游某村周边农田土壤及灌溉水渠作为研究对象，对该区域采集了40个土壤表层样本和8个水体样本，利用Arcgis软件对农田土壤样品中As、Cu、Cd、Pb、Zn、Mn和Fe₂O₃的质量分数进行克里金空间插值，解析该区域农田土壤金属的空间分布特征；采用综合污染指数法和潜在生态风险指数法对该区域耕作层土壤中As、Cu、Cd、Pb、Zn和Mn进行风险评价。结果表明，40个土壤样品中As、Cd、Cu、Zn和Pb的超标率分别为77.5%、70%、87.5%、27.5%和67.5%,说明调查区域农田土壤污染属于多金属复合污染，且对农作物的生产和安全产生巨大的威胁。部分土壤样品中As、Pb和Cd含量超过了中国农用地土壤污染风险管制值，需采取严格管控措施。通过分析土壤金属的空间分布，发现土壤金属含量超标点位主要位于灌溉口与受污染河流周边，且含量与离灌溉口距离成反比。结合目前灌溉水样中的金属均未超标的情况，得出该区域农田土壤污染是由该矿区生态环境修复前所产生的含金属灌溉水导致土壤中金属的积累...     

Factors affecting metal concentrations in the upper sediment layer of intertidal reedbeds along the river Scheldt

Factors that play a role in determining metal accumulation in sediments of 26 intertidal marshes which are mainly vegetated by reed plants (Phragmites australis) were assessed along the Scheldt estuary (Belgium and The Netherlands). In the upper 20 cm sediment layer, several physico-chemical properties (clay, silt and sand content, organic matter, carbonate and chloride content, pH and conductivity) and aqua regia extractable metals (Cd, Cr, Cu, Ni, Pb, Zn) were determined. The sediments were significantly contaminated with trace metals. The Cd concentrations often exceeded the Flemish soil remediation thresholds for nature areas, whereas Cr, Cu and Zn levels indicated moderate contamination. Pb concentrations occasionally were high, whereas Ni concentrations leaned towards background values. Organic matter was the single most important predictor variable for total metal contents in regression models, except for Cr. Additional significant predictor variables were clay or chloride content, depending on the metal. Observed metal concentrations at sites within a range of a few km from specific point-sources of metals (e.g. shipyards, industrial areas with metallurgic activities, affluents, major motorways) were somewhat higher than predicted by the models, whereas they were lower than predicted at sites which are regularly subjected to flooding by water of high salinity. The ratio between observed and predicted concentrations seems to be a valuable tool for the identification of areas which are specifically impacted by point sources.     

Trace elements as tracers of environmental pollution in the canal sediments (alluvial formation of the Danube River, Serbia)

The purpose of this study was to examine the levels of trace elements and to discuss the origin and mobility of these contaminants in the canal sediments (alluvial formation of the Danube River). The most significant fractions binding all of the studied elements were oxides and silicates. The high proportion of elements in the residual fraction and the generally low contents of extractable elements reflected the background geochemical conditions. The contents of trace elements (except Hg and As) were dominantly controlled by the presence of Fe and Mn oxides as well as by the grain size and the geochemical composition of the sediment. The studied alluvial sediments were not heavily contaminated; there were only few sites where an anthropogenic influence on the concentrations of some metals (Cu, Cd, Zn, and Pb) was noticed. The results from this study show that impact of Pan?evo industrial zone on the quality of the Danube River and its contamination with trace element is minor.     

Environmental hazard of cadmium, copper, lead and zinc in metal-contaminated soils remediated by sulfosuccinamate formulation

Accumulation of metals in soil at elevated concentrations causes risks to the environmental quality and human health for more than one hundred million people globally. The rate of metal release and the alteration of metal distribution in soil phases after soil washing with a sulfosuccinamate surfactant solution (Aerosol 22) were evaluated for four contaminated soils. Furthermore, a sequential extraction scheme was carried out using selective extractants (HAcO, NH(2)OH·HCl, H(2)O(2) + NH(4)AcO) to evaluate which metal species are extracted by A22 and the alteration in metal distribution upon surfactant-washing. Efficiency of A22 to remove metals varied among soils. The washing treatment released up to 50% of Cd, 40% of Cu, 20% of Pb and 12% of Zn, mainly from the soluble and reducible soil fractions, therefore, greatly reducing the fraction of metals readily available in soil. Metal speciation analysis for the solutions collected upon soil washing with Aerosol 22 further confirmed these results. Copper and lead in solution were mostly present as soluble complexes, while Cd and Zn were present as free ions. Besides, redistribution of metals in soil was observed upon washing. The ratios of Zn strongly retained in the soil matrix and Cd complexed with organic ligands increased. Lead was mobilized to more weakly retained forms, which indicates a high bioavailability of the remaining Pb in soil after washing. Comprehensive knowledge on chemical forms of metals present in soil allows a feasible assessment of the environmental impact of metals for a given scenario, as well as possible alteration of environmental conditions, and a valuable prediction for potential leaching and groundwater contamination.     

Leaching Characteristics of Heavy Metals and As from Two Urban Roadside Soils

The leaching tests, including the Toxicity Characteristic Leaching Procedure (TCLP), EDTA extraction and BCR sequential extractions before and after EDTA treatments, were performed on two specific soils to elucidate heavy metal-associated mineral fractions and general leachability. The TCLP illustrated the low leachability of heavy metals in soils from two sites. EDTA is a strong chelator and therefore had higher extraction efficiency compared to that of TCLP. The lower extraction percentages by EDTA for As and Sb were found compared to the other heavy metals derived from anthropogenic sources. Sequential extractions showed that the importance of acid-extractable, organically-bound and Fe–Mn oxide fractions was identified for anthropogenic heavy metals with the exception of As and Ni while the importance of residual fraction was identified for endogenous metals. Changes in sequential fractions of heavy metals after leaching with EDTA are very complex and it is difficult to generalize on which fraction was more mobile than the others. These combined results are helpful in elucidating the association of heavy metals to soil fractions and the mobility characteristics of heavy metals under certain environmental conditions.     

Distribution of Metals in the Edible Plants Grown at Jajmau, Kanpur (India) Receiving Treated Tannery Wastewater: Relation with Physico-Chemical Properties of the Soil

The implications of metal contamination of agricultural soils due to long term irrigation with treated industrial wastewater and their subsequent accumulation in the vegetables/crops growing on such soils has been assessed in an area of industrial complex, Jajmau, Kanpur (India). Physico-chemical properties of the soil were also studied. The soil and vegetables/crops were sampled from an area of 2100 acre agricultural land and analyzed for physico-chemical properties and metal accumulation in different parts of the plants. The comparison of the data of physico-chemical properties of control and contaminated soil showed that salinity, electrical conductivity, available phosphorous, sodium and potassium content (both water soluble and exchangeable) were found high in contaminated soil. The analysis of plant available metal content in the soil showed the highest level of Fe, which ranged from 529.02 to 2615 μg g⁻¹ dw and lowest level of Ni (3.12 to 10.51 μg g⁻¹ dw). The analysis of the results revealed that accumulation of toxic metal Cr in leafy vegetables was found more than fruit bearing vegetables/crops. Thus, it is recommended that the leafy vegetables are unsuitable to grow in such contaminated sites. It is important to note that toxic metal, Ni was not detected in all the plants. The edible part of the vegetables (under ground) such as, garlic (19.27 μg g⁻¹ dw), potato (11.81 μg g⁻¹ dw) and turmeric (20.86 μg g⁻¹ dw) has accumulated lowest level of toxic metal, Cr than leafy and fruit bearing vegetables. In some fruit part of vegetables such as, bitter gourd, egg plant, jack tree, maize and okra, the accumulation of Cr was not detected and may be grown in this area.     

Heavy metal risk assessment for potatoes grown in overused phosphate-fertilized soils

The long-term application of phosphate fertilizers on vegetable production fields has raised concerns about the potential health risks of heavy metal contamination of crops grown on contaminated soils in the Hamadan province, western Iran. This study found that long-term fertilizer use led to a growing accumulation of heavy metals in soils. High concentrations of elemental As, Cd, Cr, Cu, Pb, and Zn were found in potatoes sampled from overused phosphate-fertilized soils, which increased the daily intake of metals in food. However, the ingestion of potatoes from soils affected by phosphate fertilizers posed a low health risk when compared with the health risk index of <1 for heavy metals. Nevertheless, heavy metal concentrations should be periodically monitored in vegetables grown in these soils. It would also be beneficial to implement effective remediation technologies to minimize possible impacts on human health.     

Characterization and validation of a Portuguese natural reference soil to be used as substrate for ecotoxicological purposes

This study describes the first attempt to validate a Portuguese natural soil (PTRS1) to be used as reference soil for ecotoxicological purposes, aimed to both: (i) obtain ecotoxicological data for the derivation of Soil Screening Values (SSVs) with regional relevance, acting as a substrate to be spiked with ranges of concentrations of the chemicals under evaluation and (ii) act as control and as substrate for the dilution of contaminated soils in ecotoxicological assays performed to evaluate the ecotoxicity of contaminated soils, in tier 2 of risk assessment frameworks, applied to contaminated lands. The PTRS1 is a cambisol from a granitic area integrated in the Central Iberian Zone. After chemical characterization of the soil in terms of pseudo-total metals, PAHs, PCBs and pesticide contents, it was possible to perceive that some metals (Ba, Be, Co, Cr and V) surpass the Dutch Target Values (Dtvs) corrected for the percentage of organic matter and clay of the PTRS1. Nevertheless, these metals displayed total concentrations below the background total concentrations described for Portuguese soils in general. The same was observed for aldrin, endosulfan I, endosulfan II, heptachlor epoxide, and heptachlor; however the Dtvs corrected become negligible. The performance of invertebrate and plant species, commonly used in standard ecotoxicological assays, was not compromised by both soil properties and soil metal contents. The results obtained suggest that the PTRS1 can be used as a natural reference soil in ecotoxicological assays carried out under the scope of ecological risk assessment.     

Spatial distribution and transport of heavy metals in soil, ponded-surface water and grass in a pb-contaminated watershed as related to land-use practices

The aim of this study was to investigate the spatial distribution of heavy metal in soil and evaluate the dissolution of metal from soil to ponded-surface water, leaching through soil profiles and metal uptake in grass as related to different land-use practices. The data provided a scientific basis for best-management practices for land use in Khli Ti watershed. The watershed has a Pb-contamination problem from the previous operation of a Pb-ore concentrator and abandoned Zn–Pb mine. Sampling sites were selected from a land-use map, with land-use types falling into the following four categories: forest, agricultural land, residential area and road. Soil, ponded-surface water, grass samples and soil profiles were collected. The study related soil characteristics from different land-use practices and locations with observed metal concentrations in ponded-surface water and soil. High enrichment factors of Pb and As in soil were found. Partitioning coefficient, K_d values were in the order: Cr > Pb > Ni > Cu > Cd > Zn. Soil disturbance from land-use activities including tillage and traffic increased leaching of trace metal from soils. Pb in soil was significantly taken up by grass even though the Transfer Factor, TF values were rather low. Agricultural activities in the watershed must be limited. Moreover, land encroachments in the upper and middle part of the watershed which have high potential of Pb must be strictly controlled in order to reduce the Pb contamination from non-point sources.     

Prediction of PAH biodegradation in field contaminated soils using a cyclodextrin extraction technique

Biodegradation has been identified as a major loss process for organic contaminants in soils and, as a result, microbial strategies have been developed for the remediation of contaminated land. Prediction of the biodegradable fraction would be important for determining bioremediation end-points in the clean-up of contaminated land. The aim of this study was to investigate the ability of a cyclodextrin extraction to predict the extent to which polycyclic aromatic hydrocarbons (PAHs) would be degraded microbiologically in field contaminated soils; further testing the robustness and reproducibility of this extraction in chemically complex systems. Dichloromethane and hydroxypropyl-beta-cyclodextrin (HPCD) extractable fractions were measured together with the PAH biodegradable fraction in each of the six field contaminated soils. The amounts of PAHs degraded by the catabolic activity of the indigenous microflora in each of the soils were correlated with HPCD-extractable PAH concentrations. The regressions showed that the amounts of lower molecular weight PAHs extracted by the HPCD were not significantly (P > 0.05) different to the amounts that were degraded. However, higher molecular weight PAHs that were extracted by HPCD did differ significantly (P < 0.05) from the amounts degraded. Although the HPCD extraction did overestimate the microbially degradable fraction of the higher molecular weight PAHs, overall the correlations between the HPCD extractable fraction and the microbially degradable fraction were very close, with mean values of the slope of line for the six soils equalling 1. This study further describes the robust and reproducible nature of the aqueous-based soil extraction technique reliably measuring the extent to which PAHs will be microbially degraded in soil.     

Effect of biosludge and biofertilizer amendment on growth of Jatropha curcas in heavy metal contaminated soils

The pot experiments were conducted to evaluate the effect of different concentrations of arsenic, chromium and zinc contaminated soils, amended with biosludge and biofertilizer on the growth of Jatropha curcas which is a biodiesel crop. The results further showed that biosludge alone and in combination with biofertilizer significantly improved the survival rates and enhanced the growth of the plant. With the amendments, the plant was able to grow and survive upto 500, 250 and 4,000 mg kg(-1) of As, Cr and Zn contaminated soils, respectively. The results also showed that zinc enhanced the growth of J. curcas more as compared to other metals contaminated soils. The heavy metal accumulation in plant increased with increasing concentrations of heavy metals in soil, where as a significant reduction in the metal uptake in plant was observed, when amended with biosludge and biofertilizer and biosludge alone. It seems that the organic matter present in the biosludge acted as metal chelator thereby reducing the toxicity of metals to the plant. Findings suggest that plantation of J. curcas may be promoted in metal contaminated soils, degraded soils or wasteland suitably after amending with organic waste.     

Vertical characterization of soil contamination using multi-way modeling – A case study

This study describes application of chemometric multi-way modeling approach to analyze the dataset pertaining to soils of industrial area with a view to assess the soil/sub-soil contamination, accumulation pathways and mobility of contaminants in the soil profiles. The three-way (sampling depths, chemical variables, sampling sites) dataset on heavy metals in soil samples collected from three different sites in an industrial area, up to a depth of 60 m each was analyzed using three-way Tucker3 model validated for stability and goodness of fit. A two component Tucker3 model, explaining 66.6% of data variance, allowed interpretation of the data information in all the three modes. The interpretation of core elements revealing interactions among the components of different modes (depth, variables, sites) allowed inferring more realistic information about the contamination pattern of soils both along the horizontal and vertical coordinates, contamination pathways, and mobility of contaminants through soil profiles, as compared to the traditional data analysis techniques. It concluded that soils at site-1 and site-2 are relatively more contaminated with heavy metals of both the natural as well as anthropogenic origins, as compared to the soil of site-3. Moreover, the accumulation pathways of metals for upper shallow layers and deeper layers of soils in the area were differentiated. The information generated would be helpful in developing strategies for remediation of the contaminated soils for reducing the subsequent risk of ground-water contamination in the study region.