突发性环境污染事故应急监测质量保证体系的研究

结合北京市环境保护监测中心应急监测质量保证工作的经验,提出了应急监测质量保证体系的构成、运行和质量保证措施.强调了加强应急监测质量保证工作,尤其是日常的质量保证工作,定期进行应急监测演习及案例分析,是做好应急监测工作,实现应急监测数据快速性、准确性、可靠性、代表性、时效性的重要保证.     

环境空气质量自动监测系统质量保证工作的探索

根据全国多个省市的环境空气自动监测质量保证工作的经验和做法,结合乌鲁木齐市环境空气自动监测质量保证工作实际情况,对点位设置要求、制度体系建立、仪器质量控制难点、数据审核与研判等环境空气自动监测质量保证工作的关键环节进行探索,为加强环境空气自动监测质量保证体系提供参考依据.     

浅谈建设项目竣工环境保护验收监测的质量保证

建设项目竣工环境保护验收监测是各级环境监测站的一项重要工作,而质量保证措施是贯穿于验收监测全过程的核心。本文联系监测工作的实际,对该项监测的质量保证做了初步的探讨。     

大气连续自动采样中的质量保证

大气连续自动采样中的质量保证赵柳生（乌鲁木齐市环境科研监测中心站８３００００）在大气环境监测中的质量保证工作，由于监测手段，方法及气体的特性，决定了它较水质监测的质量保证有较大的难度。《环境监测技术规范》（简称规范）主要针对实验室内的操作提出了大气监...     

抓好质量保证工作 提高监测数据质量

四级环境监测站担负着环境质量监测和污染源监督监测。今就如何开展这一工作谈点浅见。１抓住机遇、建立机构、完善体系１９８９年正值我国开展质量检验机构计量认证工作,我站抓住这一时机,进一步的完善了质量保证体系,建立了质控室,设专人负责质量保证工作,同时在各...     

关于化工园区开展自行监测的探讨

从明确监测责任主体,制定监测方案、确定监测内容,做好自行监测的质量保证和质量控制等方面对化工园区如何开展自行监测进行了探讨。提出,应以化工园区为责任主体,以全要素、全指标、全过程为原则制定监测方案,明确各环境要素的监测点位、监测污染物指标以及监测频次,参照《排污单位自行监测技术指南总则》的要求做好自行监测的质量保证和质量控制工作。     

《环境监测质量管理工作指南》征订启事

<正>为进一步规范环境监测质量管理工作,推进监测质量保证体系的建立和完善,使监测质量保证和质量控制工作更加程序化、系统化、制度化、法制化,中国环境监测总站组织编写了《环境监测质量管理工作指南》。     

新书讯息

<正>为进一步规范环境监测质量管理工作,推进监测质量保证体系的建立和完善,使监测质量保证和质量控制工作更加程序化、系统化、制度化、法制化,中国环境监测总站组织编写了《环境监测质量管理工作指南》。     

大气环境监测的质量保证杂谈

大气环境监测的质量保证工作,在“空气和废气监测分析方法”,“环境监测技术规范──大气部分”、“环境空气监测质量保证手册”等书中,有了比较详细的规定,如仪器的校准,流量计的校准,空白值的测定、校准曲线的制作以及采样、布点等.本文就采样和分析中一些不易被人们注意,而又是与质量保证有关的问题,谈一点看法。     

甲醛法测定二氧化硫问题研究

在大气监测工作中,作为质量保证措施之一,就是要求校准曲线的斜率b控制在一定的范围,以检验标准溶液的准确度以及试剂的质量。《环境监测技术规范》,《环境空气监测质量保证手册》(简称“手册”),以及最新出版的《空气和废气监测分析方法》,均对斜率控制范围作了明确规定。但在实际工作中,往往有的     

一起河流砷污染事故的处置与监测分析

介绍了大沙河砷污染事故的处置和监测分析。多介质排查监测摸清了污染的范围和程度,为治理工作提供了科学依据,污染治理措施有效控制了污染的扩散;监测数据表明,治理措施将水中砷污染物沉降至河床使污染水质达标排放。吸附了大量砷化合物的底泥被清理并进一步处置,多介质跟踪监测应持续进行直至不存在潜在危害。     

核应急辐射环境监测的准备和响应

日本核泄漏事故引发的核危机为人类安全和平地利用核能又一次敲响了警钟.核事故应急工作作为减小核电站危害环境和公众安全的最后屏障,将起到重要的作用,必须做好相关的准备和响应工作.核应急辐射环境监测工作是核应急工作的重要组成部分,在对核应急辐射环境监测进行准备和响应时主要遵循实用性、适用性和适度性并兼顾常规和应急监测的“平战...     

Geochemical assessment of metal transport in glacial till during electrokinetic remediation

This paper presents the chemical speciation and retention behavior of chromium (Cr), nickel (Ni), and cadmium (Cd) prior to and after the electrokinetic remediation in glacial till soil. The speciation of the metals was predicted using the chemical speciation program MINEQL⁺. The simulations were performed for single-contaminant with only Cr(VI) or Ni, and multi-contaminants consisting of: (1) Cr(VI), Ni, and Cd; (2) Cr(III), Ni and Cd; (3) Cr(VI), Cr(III), Ni and Cd; (4) Cr(VI), Ni, and Cd with reducing agents; and (5) Cr(III), Ni, and Cd with oxidizing agent (Mn). The results showed that the speciation and distribution of cationic metals [Ni, Cd, and Cr(III)] in glacial till soil remain unaffected or slightly affected during electrokinetics. This is attributed to the high pH buffering capacity of the glacial till, leading the metals to precipitate in the soil prior to and after electrokinetics. This study showed that during electrokinetics, Cr(VI) existed as anionic complex and migrated towards the anode and the migration is maximum in case of a single-contaminant system. The study also showed that near the anode in the absence of any reducing and oxidizing agent, Cr(VI) mostly adsorbed, and some of Cr(VI) reduced to Cr(III) and migrated towards the cathode and finally precipitated due to high pH conditions. Ni and Cd remain adsorbed or precipitated due to the high pH conditions throughout the soil. Among the reducing agents, the sulfide had significant effect on the migration of metals compared to ferrous ions. While in the presence of oxidizing agent (Mn), no noticeable Cr(VI) was found in the soil sample indicating the reduction of Cr(VI) to Cr(III) and the predominance of reducing conditions due to the presence of naturally occurring iron in the glacial till soil. Overall, this study provides a reasonable explanation of the speciation and distribution of chromium, nickel and cadmium during the electrokinetic remediation of glacial till soil.     

Assessing health consequences in an environmental impact assessment: The case of Amsterdam Airport Schiphol

In this article a comprehensive approach for the evaluation of possible health effects in an environmental impact assessment (EIA) is described, illustrated with the example of Amsterdam Airport Schiphol. Unlike many EIAs, we estimated quantitatively the impact of aircraft-related pollution in terms of the number of affected people for aircraft noise annoyance, odour annoyance and hypertension. In addition, an analysis of health registry data on cardiovascular and respiratory diseases and a short survey on annoyance and risk perception were carried out. The scope of a health impact assessment depends on the situation, available knowledge and data, concern in the population about the impact and the number of people concerned. It is important to pay attention to the perception of risks and concerns from all parties involved. Moreover, the results demonstrate that far more people outside the area for which standards apply were affected than inside.     

基于WRF-NAQPMS的一次沙尘天气预报评估

为提高沙尘天气的预报准确率,利用ECWMF再分析资料和近地面PM₁₀小时质量浓度监测数据,评估WRFNAQPMS模式对2021年3月15—21日甘肃强沙尘过程的预报能力。结果表明,WRF-NAQPMS能够在一定程度上模拟此次污染过程:WRF对“3· 15”天气系统的模拟与实况整体趋势较为一致,随着预报时效延长,气象模拟场移动偏快,导致沙尘预报场发展偏快、沙尘二次传输影响下游时间提前;近地面风向的局地偏差是导致甘肃中东部地区沙尘浓度出现预报误差的主要气象因素。NAQPMS模式对PM₁₀小时质量浓度的模拟随着预报时效增加和离沙源地距离的增大,预报误差逐步增大:在河西地区,沙尘影响时段和起沙浓度的模拟值均接近监测值,其中嘉峪关、酒泉、张掖的PM₁₀小时质量浓度模拟值与监测值相关系数r>0.8;中部地区城市的沙尘影响时段预报略有偏差,且模拟值低于监测值;受复杂下垫面和气象场预报误差影响,省内其他地区沙尘预报结果参考性较低。     

Operational and Design Considerations of a Trickling Filter for Ammonia Removal from Potable Water

We studied the steady-state behavior of a mathematical model of a nitrifying trickling filter. In particular, we studied the effect of the operating conditions of the filter on the complete and safe nitrification. We presented the results with the help of the operating diagram of the system and we determined the range of operating conditions resulting in optimal operation. We also computed biofilm thickness along the filter depth and concentration profiles inside the biofilm, and compared them with experimental results found in the literature. The comparison shows very good qualitative agreement between model predictions and experimental data.     

Kelp as a Bioindicator: Does it Matter Which Part of 5 M Long Plant is Used for Metal Analysis?

Kelp may be useful as a bioindicator because they are primary producers that are eaten by higher trophic level organisms, including people and livestock. Often when kelp or other algae species are used as bioindicators, the whole organism is homogenized. However, some kelp can be over 25 m long from their holdfast to the tip of the blade, making it important to understand how contaminant levels vary throughout the plant. We compared the levels of arsenic, cadmium, chromium, lead, manganese, mercury and selenium in five different parts of the kelp Alaria nana to examine the variability of metal distribution. To be useful as a bioindicator, it is critical to know whether levels are constant throughout the kelp, or which part is the highest accumulator. Kelp were collected on Adak Island in the Aleutian Chain of Alaska from the Adak Harbor and Clam Cove, which opens onto the Bering Sea. In addition to determining if the levels differ in different parts of the kelp, we wanted to determine whether there were locational or size-related differences. Regression models indicated that between 14% and 43% of the variation in the levels of arsenic, cadmium, chromium, manganese, mercury, and selenium was explained by total length, part of the plant, and location (but not for lead). The main contributors to variability were length (for arsenic and selenium), location (mercury), and part of the plant (for arsenic, cadmium, chromium and manganese). The higher levels of selenium occurred at Clam Cove, while mercury was higher at the harbor. Where there was a significant difference among parts, the holdfast had the highest levels, although the differences were not great. These data indicate that consistency should be applied in selecting the part of kelp (and the length) to be used as a bioindicator. While any part of Alaria could be collected for some metals, for arsenic, cadmium, chromium, and manganese a conversion should be made among parts. In the Aleutians the holdfast can be perennial while the blade, whipped to pieces by winter wave action, is regrown each year. Thus the holdfast may be used for longer-term exposure for arsenic, cadmium, chromium and manganese, while the blade can be used for short-term exposure for all metals. Cadmium, lead and selenium were at levels that suggest that predators, including people, may be at risk from consuming Alaria. More attention should be devoted to heavy metal levels in kelp and other algae from Adak, particularly where they may play a role in a subsistence diets.     

Comparison of Numerical and Experimental Results for the Evaluation of the Depollution Effectiveness of Photocatalytic Coverings in Street Canyons

Towards the aim of improving the air quality in the urban environment via the application of innovative TiO₂ based photocatalytic coverings, a field campaign took place within the frame of the EU PICADA project () to asses the expected depollution efficiency of such materials under realistic conditions. Furthermore, extensive numerical modeling was performed via the application of the RANS CFD code for microscale applications MIMO, in an effort to asses the sensitivity of the developing flow field and the corresponding dispersion mechanism and hence of the depollution efficiency of the PICADA products on a wide range of factors, with most notably the length of the street canyon, the thermal exchange between the heated street canyon walls and the air and the approaching wind direction. For the needs of the PICADA project a new, simple module had to be implemented into MIMO to be able to model the removal of NO_x from a street canyon whose walls have been treated with a photocatalytic product. The model simulations results presented in this paper, show that MIMO is indeed capable of predicting the effectiveness of the photocatalytic products in question. At the same time, they reveal a strong dependence of the developing flow and concentration fields inside the field site street canyon configuration on most of the aforementioned factors with most notably the direction of the approaching wind.

Assessment of Air Quality After the Implementation of Compressed Natural Gas (CNG) as Fuel in Public Transport in Delhi, India

Public transport in Delhi was amended by the Supreme Court of India to use Compressed Natural Gas (CNG) instead of diesel or petrol. After the implementation of CNG since April 2001, Delhi has the highest fraction of CNG-run public vehicles in the world and most of them were introduced within 20 months. In the present study, the concentrations of various criteria air pollutants (SPM, PM₁₀, CO, SO₂ and NO_x) and organic pollutants such as benzene, toluene, xylene (BTX) and polycyclic aromatic hydrocarbons (PAHs) were assessed before and after the implementation of CNG. A decreasing trend was found for PAHs, SO₂ and CO concentrations, while the NO_x level was increased in comparison to those before the implementation of CNG. Further, SPM, PM₁₀, and BTX concentrations showed no significant change after the implementation of CNG. However, the BTX concentration demonstrated a clear relation with the benzene content of gasoline. In addition to the impact of the introduction of CNG the daily variation in PAHs levels was also studied and the PAHs concentrations were observed to be relatively high between 10 pm to 6 am, which gives a proof of a relation with the limited day entry and movement of heavy vehicles in Delhi.     

The Great Lakes, an Ecosystem Rehabilitated, But Still Under Threat

Since 1972, the Parties (United States and Canada, 1987) to the Great Lakes Water Quality Agreement have been working collaboratively to achieve the purpose of the Agreement “to restore and maintain the chemical, physical and biological integrity of the waters of the Great Lakes Basin Ecosystem”. Billions of dollars and countless person – hours have been expended towards this end, but have the Parties, and their numerous collaborators at the state, provincial, and municipal levels, along with industry and citizen activists achieved meaningful results? This paper will examine the information provided through various monitoring programs and will assess the success of the Parties' programs, and will also discuss the continuing threats to achieving the purpose of the Agreement.