Saharan dust episodes and pregnancy

Desert dust is one of the natural contributors to atmospheric particulate matter worldwide. Although particulate pollution has been shown to adversely affect pregnancy, the available evidence on the impact of dust episodes on pregnancy is very scarce. The aim of this study was to evaluate the impact of Saharan dust episodes on pregnancy complications (preeclampsia and bacteriuria) and outcomes (birth weight and gestational age at delivery). This study was based on a cohort of births (N = 3565) that occurred in a major university hospital in Barcelona during 2003-2005. To determine Saharan dust episodes, we developed a two-stage approach based on meteorological evidence of the presence of Saharan dust cloud over the region and unusually high levels of particulate levels on the ground while taking account of traffic sources. The associations between the number of Saharan dust episodes during whole pregnancy as well as each pregnancy trimester and pregnancy complications and outcomes were analysed. There were 152 days (out of 838 days) with Saharan dust cloud over the region from which 45 days were determined as episodic days. We did not observe any statistically significant harmful effect of Saharan dust episodes on our included pregnancy complications and outcomes. However, we observed a small but statistically significant increase in gestational age at delivery in association with the number of episodic days during the third trimester and whole pregnancy (0.8 and 0.5 days respectively). Our findings were not suggestive for any adverse effect of Saharan dust episodes on our included pregnancy complications and outcomes.     

Saharan dust contribution to PM₁₀, PM₂.₅ and PM₁ in urban and suburban areas of Rome: a comparison between single-particle SEM-EDS analysis and whole-sample PIXE analysis

From February 15th to April 15th 2009, a period characterised by two episodes of Saharan dust outbreaks in Italy, particulate matter (PM) samples were collected at two stations (urban and suburban) in Rome. Some samples were selected and analysed using the SEM-EDS technique to characterise PM, focussing especially on the mineral contribution. Samples were representative both of days affected by Saharan dust episodes and days without this contribution. Cluster analysis allowed the attribution of each of about 67,000 analysed particles to one of the seven main statistical groups based on their composition. Characteristics of the particulate components identified using SEM-EDS analysis were verified by PIXE analysis carried out on filters collected in a suburban area. Ultimately, the contribution of crustal particles was revealed to be consistently high, highlighting the importance of local and regional mineral contributions, as well as those of Saharan origin. Therefore, quantifying all mineral contributions to resuspended particulate could lead to significant reductions of the PM level also on days not influenced by Saharan dust, thus limiting conditions when PM?? daily limit value (DLV) established by European legislation is exceeded.     

Particulate Matter Over A Seven Year Period in Urban and Rural Areas Within, Proximal and Far from Mining and Power Station Operations in Greece

Lignite mining operations and lignite-fired power stations result in major particulate pollution (fly ash and fugitive dust) problems in the areas surrounding these activities. The problem is more complicated, especially, for urban areas located not far from these activities, due to additional contribution from the urban pollution sources. Knowledge of the distribution of airborne particulate matter into size fraction has become an increasing area of focus when examining the effects of particulate pollution. On the other hand, airborne particle concentration measurements are useful in order to assess the air pollution levels based on national and international air quality standards. These measurements are also necessary for developing air pollutants control strategies or for evaluating the effectiveness of these strategies, especially, for long periods. In this study an attempt is made in order to investigate the particle size distribution of fly ash and fugitive dust in a heavy industrialized (mining and power stations operations) area with complex terrain in the northwestern part of Greece. Parallel total suspended particulates (TSP) and particulate matter with an aerodynamic diameter less than 10 μm (PM10) concentrations are analyzed. These measurements gathered from thirteen monitoring stations located in the greater area of interest. Spatial, temporal variation and trend are analyzed over the last seven years. Furthermore, the geographical variation of PM10 – TSP correlation and PM10/TSP ratio are investigated and compared to those in the literature. The analysis has indicated that a complex system of sources and meteorological conditions modulate the particulate pollution of the examined area.     

颗粒物激光雷达在大气复合污染立体监测中的应用

针对由于局地污染、沙尘输入、外源性输入与局地污染物相互叠加所导致的3种灰霾污染发生过程,分别选取3个典型案例,采用颗粒物激光雷达对污染物的时空分布特征进行解析。研究发现,在局地污染发生时,污染物从地面开始垂直向上扩散,扩散高度约1 km。重度污染过程中,气溶胶的日均垂直消光系数随高度的变化背离指数衰减特征,800 m高度处出现消光系数的极大值层,极大值超过2.5 km-1,800 m以下消光系数近乎常数,约为0.3 km-1。这说明,重污染过程中,有一层较厚重的颗粒物分布,使近地面污染物在垂直方向的扩散能力减弱,形成积累效应,造成大面积空气混浊。当有外源性沙尘输入时,激光雷达能够清晰地监测到污染团输入的全过程。沙团突然出现在高空2~3 km。污染团退偏振度较大,超过0.3。随着沙尘粒子的重力沉降,沙团的轮廓在垂直方向上不断地增大。沙团的输入,导致近地面粗颗粒质量浓度的增加幅度明显大于细颗粒。在第3个案例中,激光雷达清晰地监测到高空1.8~3 km突然出现含有大量球形细颗粒的污染团,同时还发现此污染团与近地面的污染物有不同的演化特征。近地面污染物随时间垂直向上扩散,12:00左右扩散高度超过1.8 km。而高空的污染团逐渐沉降进入边界层内,与近地面扩散的污染物相互混合,共同导致本地的灰霾天气。综上所述,激光雷达可以清晰地捕获污染物的垂直结构特征,对不同的致霾过程进行立体解析,实现对大气复合污染的监测和机理研判。     

辽宁省三城市大气颗粒物来源解析研究

针对辽宁省的沈阳、抚顺、葫芦岛三个城市的大气颗粒物来源,应用CMB化学质量平衡模型和二重源解析技术进行了定性和定量解析。识别各源类及其成分谱的特征,分析、比较大气颗粒物的时空分布特征,并计算三城市各源类在不同季节对城市大气颗粒物污染的贡献率,得到辽宁省城市大气颗粒物来源和季节分布特征的一般规律,说明城市扬尘、土壤风沙尘和煤烟尘是城市颗粒物的主要来源,应作为颗粒物污染治理的重点,而抚顺市特有的钢铁尘,葫芦岛市特有的锌尘等源类的污染也不容忽视。     

北方沙尘对江苏环境空气中可吸入颗粒物浓度的影响

利用卫星遥感数据、气象观测资料和江苏省环境空气自动站的可吸入颗粒物的监测数据,对春季中国北方的沙尘暴过程对江苏环境空气中可吸入颗粒物浓度的影响分析发现,沙尘暴所含的沙尘粒子在冷空气的引导下可能进入江苏,对环境空气中可吸入颗粒物浓度将会产生较大的影响;北方沙尘暴所携带的沙尘粒子是春季江苏空气污染的重要来源之一,是预报空气质量异常偏高的重要依据之一。     

Regional and seasonal characteristics of emission sources of fine airborne particulate matter collected in the center and suburbs of Tokyo, Japan as determined by multielement analysis and source receptor models

Airborne particulate matter, suspected to induce adverse effects on human health, have been one of the most important concerns regarding recent air pollution issues in Japan. To characterize regional and seasonal variations in emission sources of fine airborne particulate matter (d < 2 microm), monthly samples (n = 36 for each site) were collected at urban (Tokyo), suburban (Maebashi), and mountainous (Akagi) sites in Japan from April 2003 to March 2006. Multielement analysis of chemical species (Na, Al, K, Ca, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Sb, and Pb) was performed by inductively coupled plasma-atomic emission spectrometry and inductively coupled plasma-mass spectrometry. The combined source receptor model, which consists of positive matrix factorization and chemical mass balance, determined the contributions of nine emission sources (local and continental soils, road dust, coal and oil combustion, waste incineration, steel industry, brake wear, and diesel exhaust) to the observed elemental concentrations. Large regional differences were identified in the source contributions among the observational sites. Diesel exhaust was identified as the most significant source (70% of identified contributions) at the urban site. Local and continental soils, coal combustion, and diesel exhaust were intricately assigned (20-30% each) to the suburban site. Continental soil was the predominant source (65%) at the mountainous site. Respective significant source contributions dominated the seasonal variations of total elemental concentrations at each site. These results suggest that a better understanding of the regional and seasonal characteristics of impacting emission sources will be important for improving regional environments.     

Enrichment of organic pollutants in the sea surface microlayer (SML) at Terra Nova Bay, Antarctica: influence of SML on superficial snow composition

Concentrations of dissolved and particle-associated n-alkanes, phthalates and polycyclic aromatic hydrocarbons (PAHs) were measured in sea surface microlayer (SML) and sub-surface water (SSL) samples collected in the coastal area of Terra Nova Bay, Antarctica, during the Austral spring 1998/1999. SML concentrations of the selected organic compounds were higher than SSL values and the enrichment factors were greater in the particulate phase than in the dissolved phase. During the same campaign, "fresh" snow samples, collected at different altitudes (from sea level up to 2670 m) near the coast on Mt Melbourne, immediately after a snowy event, were analysed in order to provide more information on air/sea exchange processes. The same classes of organic compounds found in sea water were also present in "fresh" snow samples. The surfactant fluorescent organic matter (SFOM), adsorbed on the microdrop aerosol surface, could be considered the main constituent of the enrichment and the carrier at higher altitudes of organic compounds. In fact, hydrocarbons (n-alkanes and PAHs), which are not surfactants like phthalates, could interact with SFOM and follow the same fate.     

石家庄市大气颗粒物元素组分特征分析

为研究石家庄市大气颗粒物的污染特征及其来源,于2013年4—5月在主城6区分别采集TSP、PM10和PM2.5颗粒物样品,利用ICP-MS分析其中的22种元素浓度。结果表明,石家庄市城区Ca、Fe元素在各粒径颗粒物中含量都较高,PM2.5中的S、K含量较高,PM10和TSP中Mg、Al的浓度相对较高。颗粒物的主要来源为燃煤尘、道路尘和建筑尘,TSP、PM10和PM2.5具有较好的统计相关性和同源性。     

基于颗粒物光量子雷达的颗粒物排放实时溯源及应用

在大气污染治理中,传统探测方式在局地大气颗粒物排放源的精准定位和实时溯源方面还有所不足。自主研发的1 550 nm波长颗粒物光量子雷达,具备探测效率高、人眼安全等特点,360°水平扫描一周仅需8.5 min。基于该雷达水平扫描监测,结合迭代拼接法和新发展的颗粒物示踪系数及污染源定位方法,可准确识别并定位出当地的污染排放源位置。对于部分污染排放定位溯源案例,结合多图展现并分析了颗粒物排放、扩散、传输、消散过程中的烟羽变化,并结合卫星图像确认了相应工业生产和建筑扬尘等典型颗粒物排放源。地面监测数据分析了部分污染源对监测站点颗粒物浓度的影响。该雷达通过低仰角、可重复性的快速扫描,结合符合颗粒物扩散规律的分析过程,在颗粒物污染实时溯源定位方面展现了极高的准确性。     

2015—2017年江苏省秋、冬季空气质量状况

采用2015—2017年秋、冬季江苏省环境空气质量监测数据,从空气质量优良(达标)率、首要污染物、主要污染物浓度分析空气质量现状及特点。结果表明,江苏省秋、冬季空气质量优良(达标)率在60%左右,其中沿海地区空气质量达标率最高(71.1%),西北地区达标率最差(52.2%)。污染日的首要污染物主要为PM 2.5,占比高达91.5%。ρ(PM2.5)/ρ(PM 10)存在地区差异,江苏西北地区扬尘源贡献较大,江苏南部地区的二次颗粒物贡献更明显。ρ(NO2)/ρ(SO2)逐年持续升高,表明大气污染类型从燃煤性污染转变为复合型污染。     

Characteristics of Hazardous Airborne Dust Around an Indian Surface Coal Mining Area

Surface coal mining creates more air pollution problems with respect to dust than underground mining . An investigation was conducted to evaluate the characteristics of the airborne dust created by surface coal mining in the Jharia Coalfield. Work zone air quality monitoring was conducted at six locations, and ambient air quality monitoring was conducted at five locations, for a period of 1 year. Total suspended particulate matter (TSP) concentration was found to be as high as 3,723 μg/m³, respirable particulate matter (PM10) 780 μg/m³, and benzene soluble matter was up to 32% in TSP in work zone air. In ambient air, the average maximum level of TSP was 837 μg/m³, PM10 170 μg/m³ and benzene soluble matter was up to 30%. Particle size analysis of TSP revealed that they were more respirable in nature and the median diameter was around 20 μm. Work zone air was found to have higher levels of TSP, PM10 and benzene soluble materials than ambient air. Variations in weight percentages for different size particles are discussed on the basis of mining activities. Anionic concentration in TSP was also determined. This paper concludes that more stringent air quality standards should be adopted for coal mining areas and due consideration should be given on particle size distribution of the air-borne dust while designing control equipment.     

基于环境库兹涅茨曲线特征的桂林市大气环境状况研究

根据2006年-2012年桂林市经济发展主要指标和大气环境污染指标的统计资料，分析了该市人均 GDP 与SO2、NO x、烟（粉）尘排放量及 PM10质量浓度和 API优良率等大气环境指标的相关关系，建立了经济发展与大气环境指标之间的模拟曲线。模拟结果表明，桂林市处于工业时期，随着人均GDP增加，SO2和烟（粉）尘排放得到了一定程度的缓解，而NO x 和 PM10排放从长期看还处于上升趋势。建议改善能源结构，调整产业结构和工业布局，制定财税激励政策，开展环境综合整治，加大机动车排污防治力度，进一步控制大气污染。     

质谱直接测量法解析盐城市大气细颗粒物来源

为全面了解盐城市大气颗粒物的组成,摸清以PM2.5为首要污染物的来源,说清其化学组分和源贡献率,于2014年12月16日00:00—2014年12月21日09:00,利用在线单颗粒气溶胶质谱仪,对盐城市细颗粒物进行实时在线源解析。结果表明,盐城首要污染物为燃煤,占比为23.7%,其次是机动车尾气,占比为18.3%,第三位是扬尘,占总颗粒数的15.7%,生物质燃烧占比为14.8%位列第四,工业工艺源、二次无机源和其他源贡献率相对较小。     

Major and trace element partitioning between dissolved and particulate phases in Antarctic surface snow

In order to provide a new insight into the Antarctic snow chemistry, partitioning of major and trace elements between dissolved and particulate (i.e. insoluble particles, >0.45 μm) phases have been investigated in a number of coastal and inland snow samples, along with their total and acid-dissolvable (0.5% nitric acid) concentrations. Alkaline and alkaline-earth elements (Na, K, Ca, Mg, Sr) were mainly present in the dissolved phase, while Fe and Al were predominantly associated with the particulate matter, without any significant difference between inland and coastal samples. On the other hand, partitioning of trace elements depended on the sampling site position, showing a general decrease of the particulate fraction by moving from the coast to the plateau. Cd, Cu, Pb and Zn were for the most part in the dissolved phase, while Cr was mainly associated with the particulate fraction. Co, Mn and V were equally distributed between dissolved and particulate phases in the samples collected from the plateau and preferentially associated with the particulate in the coastal samples. The correlation between the elements and the inter-sample variability of their concentration significantly decreased for the plateau samples compared to the coastal ones, according to a change in the relative contribution of the metal sources and in good agreement with the estimated marine and crustal enrichment factors. In addition, samples from the plateau were characterised by higher enrichment factors of anthropogenic elements (Cd, Cr, Cu, Pb and Zn), compared to the coastal area. Finally, it was observed that the acid-dissolvable metal concentrations were generally lower than the total concentration values, showing that the acid treatment can dissolve only a given fraction of the metal associated with the particulate (<20% for iron and aluminium).     

Possible markers of traffic-related emissions

Looking for robust indicators of motor vehicle emissions it has been found that brake wear and linings are significant contributors of Cu, Mo and Sb to air particulate matter. These trace elements, whose mutual ratios in airborne particulate matter resulted quite different from those in crustal material, appear to be available fingerprinting tools to identify the contribution of on-road vehicles to traffic-derived particulate matter. In this study, the results of analytical determinations of Cu, Mo and Sb on PM(10), PM(2.5), vegetation and brake dust samples, together with gas (CO, NOx) concentrations, are discussed. Highly significant correlations among Cu, Sb and Mo were observed in particulate matter from Palermo and between Cu-Sb and Cu-Mo at Catania. Further significant positive correlations have been found in pine needles from Palermo, Gela and in platanus leaves from Catania.     

青藏高原典型城市拉萨市大气颗粒物污染源成分谱建立研究与特征分析

系统研究建立高原典型城市拉萨市开放源(土壤风沙尘、道路扬尘、施工扬尘、采矿扬尘),移动源(机动车尾气尘),固定源(工业烟粉尘、生物质燃烧尘及餐饮油烟)共3类8种大气颗粒物(PM_(2.5)、PM_(10))污染源化学成分谱。研究结果表明:开放源以地壳类元素为主,自然背景特征明显;移动源源成分谱中元素碳含量明显高于其他城市,在PM_(2.5)、PM_(10)源谱中分别占60.15%、51.86%,有机碳含量也相对较高,均超过20%;固定源中,牛粪和松柏枝两类生物质燃烧污染源的有机碳含量显著高于其他组分,工业烟粉尘中Ca远高于其他组分,在PM_(2.5)、PM_(10)源谱中分别占21.32%、21.21%。移动源、固定源源成分谱均显示出高原城市的独特特征。     

Characterization and Identification of the Sources of Chromium, Zinc, Lead, Cadmium, Nickel, Manganese and Iron in Pm10 Particulates at the Two Sites of Kolkata, India

Monitoring of ambient PM₁₀ (particulate matter which passes through a size selective impactor inlet with a 50% efficiency cut-off at 10 μm aerodynamic diameter) has been done at residential (Kasba) and industrial (Cossipore) sites of an urban region of Kolkata during November 2003 to November 2004. These sites were selected depending on the dominant anthropogenic activities. Metal constituents of atmospheric PM₁₀ deposited on glass fibre filter paper were estimated using Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES). Chromium (Cr), zinc (Zn), lead (Pb), cadmium (Cd), nickel (Ni), manganese (Mn) and iron (Fe) are the seven toxic trace metals quantified from the measured PM₁₀ concentrations. The 24 h average concentrations of Cr, Zn, Pb, Cd, Ni, Mn and Fe from ninety PM₁₀ particulate samples of Kolkata were found to be 6.9, 506.1, 79.1, 3.3, 7.4, 2.4 and 103.6 ng/m³, respectively. The 24 h average PM₁₀ concentration exceeded national ambient air quality standard (NAAQS) as specified by central pollution control board, India at both residential (Kasba) and industrial (Cossipore) areas with mean concentration of 140.1 and 196.6 μg/m³, respectively. A simultaneous meteorology study was performed to assess the influence of air masses by wind speed, wind direction, rainfall, relative humidity and temperature. The measured toxic trace metals generally showed inverse relationship with wind speed, relative humidity and temperature. Factor analysis, a receptor modeling technique has been used for identification of the possible sources contributing to the PM₁₀. Varimax rotated factor analysis identified four possible sources of measured trace metals comprising solid waste dumping, vehicular traffic with the influence of road dust, road dust and soil dust at residential site (Kasba), while vehicular traffic with the influence of soil dust, road dust, galvanizing and electroplating industry, and tanning industry at industrial site (Cossipore).     

Monitoring of cotton dust and health risk assessment in small-scale weaving industry

The present study describes the estimation of particulate matter (cotton dust) with different sizes, i.e., PM(1.0), PM(2.5), PM(4.0), and PM(10.0 μm) in small-scale weaving industry (power looms) situated in district Hafizabad, Punjab, Pakistan, and the assessment of health problems of workers associated with these pollutants. A significant difference was found in PM(1.0), PM(2.5), PM(4.0), and PM(10.0) with reference to nine different sampling stations with p values <0.05. Multiple comparisons of particulate matter with respect to size, i.e. PM(1.0), PM(2.5), PM(4.0), and PM(10.0), depict that PM(1.0) differs significantly from PM(2.5), PM(4.0), and PM(10.0), with p values <0.05 and that PM(2.5) differs significantly from PM(1.0) and PM(10.0), with p values <0.05, whereas PM(2.5) differs non-significantly from PM(4.0), with a p value >0.05 in defined sampling stations on an average basis. Majority of the workers were facing several diseases due to interaction with particulate matter (cotton dust) during working hours. Flue, cough, eye, and skin infections were the most common diseases among workers caused by particulate matter (cotton dust).     

Multivariate Statistical Analysis of Meteorological and Air Pollution Data in the ‘Campo De Gibraltar’ Region, Spain

A complete statistical analysis of meteorological and air pollution data was carried out in the ‘Campo de Gibraltar’ region (in the South of Spain) from 1999 to 2002. This is a heavy industrialized area where, up to date, very few air pollution studies have been made. The main objectives of the study presented here have been the characterization of the meteorological and (gaseous and particulate) air pollution conditions in the area, and the relations between them. Multivariate statistical techniques, such as Principal Component Analysis (PCA), have been applied to the data. The results show that air quality in the area is highly dependent on meteorological conditions such as wind persistence and direction, dispersion capability of the atmosphere, and humidity content. On average, sulphur dioxide and nitrogen oxide air pollution, mainly caused by fuel-oil combustion and traffic, respectively, is not very high. However, an important number of exceedences of the limits established by the EU Directive 1999 for PM10 (particulate matter with a diameter less than 10 μm) have been observed in some points of the area. A significant percentage of these exceedences (about 22% on average) are likely caused by African dust intrusions, which usually take place from May to August. From gaseous and particulate air correlations, it seems that anthropogenic activities contribute with about 19% on average.