Evolution of water chemistry in natural acidic environments in Yangmingshan,Taiwan

In Yangmingshan National Park, located in the northern part of the Taiwan Island, there is a very rare area where fish (Channa asiatica) live in spite of acid environments. The origin of the acid in local acid ponds and rivers and the evolution of the water chemistry are discussed on the basis of sulfur stable isotope ratios and chemical equilibria. One of the sources of the acid is sulfuric acid, which is derived from the oxidation of hydrogen sulfide in volcanic gas gushing out from fumaroles around the area and from acid deposition supplied from Taipei City. It is also derived from the oxidation of pyrite: the sulfur stable isotope ratios of delta 34S of +1@1000 to +4@1000 (relative to CDT) of sulfate in acid pond waters (pH 3-4) could be related to those of hydrogen sulfide in volcanic gas, pyrite in local pond sediments and soils, and sulfate in rain water. One acid source is sulfuric and hydrochloric acids arising in springs from geothermal activity: the delta 34S values were characterised by +13@1000 to +17@1000 sulfate-S, which was provided by a disproportionation reaction of sulfur dioxide in the depths. Another acid source could be the oxidation of iron(II). Under acidic conditions, the water-rock reaction gives rise to high concentrations of aluminium and iron. While flowing down surface streams, iron(II) is oxidised to iron(III) and then hydrolysed to cause further acidification under oxic conditions. The concentrations of iron and aluminium are controlled by redox and dissolution equilibria.     

A laboratory investigation of the effectiveness of various skin and surface decontaminants for aliphatic polyisocyanates

Isocyanates may cause contact dermatitis and respiratory sensitization leading to asthma. Dermal exposure to aliphatic isocyanates in auto body shops is very common. However, little is known about the effectiveness of available commercial products used for decontaminating aliphatic polyisocyanates. This experimental study evaluated the decontamination effectiveness of aliphatic polyisocyanates for several skin and surface decontaminants available for use in the auto body industry. The efficiency of two major decontamination mechanisms, namely (i) consumption of free isocyanate groups via chemical reactions with active hydrogen components of the decontaminant and (ii) physical removal processes such as dissolution were studied separately for each decontaminant. Considerable differences were observed among surface decontaminants in their rate of isocyanate consumption, of which those containing free amine groups performed the best. Overall, Pine-Sol(R) MEA containing monoethanolamine was the most efficient surface decontaminant, operating primarily via chemical reaction with the isocyanate group. Polypropylene glycol (PPG) had the highest physical removal efficiency and the lowest reaction rate with isocyanates. All tested skin decontaminants performed similarly, accomplishing decontamination primarily via physical processes and removing 70-80% of isocyanates in one wiping. Limitations of these skin decontaminants are discussed and alternatives presented. In vitro testing using animal skins and in vivo testing with field workers are being conducted to further assess the efficiency and identify related determinants.     

江苏省不锈钢产业集聚区土壤重金属污染评价与分析

随着不锈钢产业的发展,其生产加工过程中产生的含重金属的废水、废气及固体废弃物对周围土壤及地表水环境的影响也日益显现。选择江苏省不锈钢产业集聚区内溱东镇土壤为研究对象,对区域内63个采样点进行分析,发现区域内土壤中Cr、Zn、Cd、Pb质量分数平均值均未超过国家土壤环境质量标准的二级标准要求,重金属污染程度由大到小的顺序为:CdNiCrMnZnPb,并且通过SPSS13.0统计软件对分析数据进行相关性分析,数据表明,土壤中重金属Cr、Fe、Cd、Ni、Mn来自不锈钢产业的可能性较大。     

氯气检测管的研制

经过条件优化试验，研制出氯气检测管。检测管显色长度与氯气浓度呈线性相关，对氯气标气7次测定的变异系数为13．8％，平均相对误差为5．2％，小于15％；一次测定最大相对误差为20％，小于25％，符合国家标准GB7230－87的要求。与化学法比较，2种方法测试结果无显著性差异。干扰物有溴和氯化氢气体以及高浓度二氧化氮。检测管寿命为1a。     

Reduction of SO2 emissions by ammonia gas during unstaged combustion

The reduction of SO₂ by the addition of ammonia gas has been studied in a 2 m high fluidized bed combustor having a 30 cm static bed height and a freeboard height of 170 cm. Ammonia gas was injected at 52 cm above the distributor where the temperature is ca. 700° C by an uncooled stainless steel tube injector. Experiments were carried out to investigate the effects of amminia gas injection on sulphur dioxide emissions at unstaged conditions of: (i) excess air level, (ii) NH₃:SO₂ molar ratio, (iii) fluidizing velocity and (iv) bed height.A maximum reduction of 75% in SO₂ emissions was found at 40% excess air, at an NH₃:SO₂ molar ratio of 5.4. The onset of SO₂ reduction occurred at an NH₃:SO₂ ratio of 1.5 However, the most effective ratio was found to be between 3 and 5. Fluidizing velocity and bed height were also found to have significant influence on SO₂ reduction.It is difficult to determine how the SO₂ reduction varied with operating conditions. When ammonia is added in the main combustor zone, the temperature is much higher than that required for the occurrence of sulphur dioxide-ammonia and sulphur trioxide-ammonia reactions. However, this paper points out the significance of ammonia addition in the reduction of sulphur dioxide.     

Metal release rate from AISI 316L stainless steel and pure Fe, Cr and Ni into a synthetic biological medium--a comparison

Metal release rates from stainless steel grade 316L were investigated in artificial lysosomal fluid (ALF), simulating a human inflammatory cell response. The main focus was placed on release rates of main alloying elements using graphite furnace atomic absorption spectroscopy, and changes in surface oxide composition by means of X-ray photoelectron spectroscopy. To emphasise that alloys and pure metals possess totally different intrinsic properties, comparative studies were performed on the pure alloying constituents: iron, nickel and chromium. Significant differences in release rates were observed due to the presence of a passive surface film on stainless steel. Iron and nickel were released at rates more than 300 times lower from the 316L alloy compared with the pure metals whereas the release rate of chromium was similar. Iron was preferentially released compared with nickel and chromium. Immersion in ALF resulted in the gradual enrichment of chromium in the surface film, a small increase of nickel, and the reduction of oxidized iron with decreasing release rates of alloy constituents as a result. As expected, released metals from stainless steel grade 316L were neither in proportion to the bulk alloy composition nor to the surface film composition.     

The rumen and hindgut as source of ruminant methanogenesis

The advantage of ruminants is their ability to convert fibrous biomass to high quality protein for human nutrition purposes. Rumen fermentation, however, is always associated with the formation of methane — a very effective greenhouse gas. Hindgut fermentation differs from rumen fermentation by a substantially lower methane production and the presence of reductive acetogenesis or dissimilatory sulfate reduction. Sulfate reduction and methanogenesis seem to be mutually exclusive, while methanogenesis and reductive acetogenesis may occur simultaneously in the hindgut. Although acetogenic bacteria have been isolated from the bovine rumen, methanogenesis prevails in the forestomachs. The substitution of acetate for methane as a hydrogen sink in the rumen should increase energy yield for the animal and decrease methane emissions into the environment. Differences in the major hydrogen sinks in both microbial ecosystems are discussed and mainly related to differences in substrate availability and to the absence of protozoa in the hindgut.     

Theoretical aspects of fluoride air contaminant formation in aluminium smelter potrooms

The amount of particulate fluorides evolved from aluminium electrolysis cells is not entirely accounted for by the fluorides entrained in the anode gas. The largest additional source of particulate fluoride formation is by direct evaporation of fluorides into the anode gas stream and subsequent condensation on the drops of electrolyte generated in the process of bubble burst. A theoretical model was used for the calculation of the main physical parameters responsible for the formation of particle nuclei when the hot anode-gas is mixed with ambient air. The results of these calculations are in agreement with experimental observations reported in the literature. In particular, the size distribution, composition and morphology of the nano-particles support the theory of a vapour condensation mechanism under conditions of extreme supersaturation, but further studies are necessary.     

大气中有机胺类物质反应机理和消除过程研究

综述大气中有机胺可能的来源、健康危害及其在大气中的均相和非均相化学转化机制,阐述有机胺的反应产物对二次有机气溶胶及其对大气气溶胶的物理和化学性质的改变,此类改变增强大气气溶胶间接气候效应(如成云结核能力等)。大气中的有机胺主要通过与大气氧化剂的反应和非均相反应过程的溶解或置换进入颗粒相,而后随着湿沉降(如云滴、雾滴、雨滴等)到达地面或海面。     

化学吸收法采集固定污染源氨气的影响因素探究

固定污染源氨气的手工监测,干扰因素较多,其中采样环节尤为关键。实验通过催化氧化-化学发光法考察不同采样管线材质对氨气的吸附效果,离子色谱法考察化学吸收法采集氨气的吸收瓶类型、采样流量、吸收液种类、吸收液浓度及体积等采样条件对氨气吸收效率的影响。实验表明,316 L不锈钢与聚四氟乙烯对氨气的吸附较小,氨气的采样流量不宜超过1.0 L/min,棕色气泡式吸收瓶更适用于氨气样品的采集,磷酸溶液作吸收液对氨气的吸收效率较好,对于低浓度的氨气样品,应采用低流量长时间采集。     

Evaluation of electrochemical processes for the removal of several target aromatic hydrocarbons from petroleum contaminated water

Ground and surface water contamination resulting from the leakage of crude oil and refined petroleum products is a serious and growing environmental problem throughout the world. Consequently, a study of the use of electrochemical treatment in the clean-up was undertaken with the aim of reducing the water contamination by aromatic pollutants to more acceptable levels. In the experiments described, water contamination by refined petroleum products was simulated under laboratory conditions. Electrochemical treatment, using aluminium electrodes, has been optimised by full factorial design and surface response analysis in term of BTEX and PAHs removal and energy consumption. The optimal conditions of pH, current density, electrolysis time, electrolyte type, and electrolyte concentration have then been applied in the treatment of real water samples which were monitored as petroleum contaminated samples. Treatment results have shown that electrochemical methods could achieve the concentration of these pollutants to undetectable levels in particular groundwater and surface water, hence, they can be highly effective in the remediation of water contaminated by aromatic hydrocarbons, and the use of these processes is therefore recommended.     

Corrosion-induced release of the main alloying constituents of manganese-chromium stainless steels in different media

The main focus of this paper is the assessment of release rates of chromium, nickel, iron and manganese from manganese-chromium stainless steel grades of low nickel content. The manganese content varied between 9.7 and 1.5 wt% and the corresponding nickel content between 1 and 5 wt%. All grades were exposed to artificial rain and two were immersed in a synthetic body fluid of similar pH but of different composition and exposure conditions. Surface compositional studies were performed using X-ray photoelectron spectroscopy (XPS) in parallel to correlate the metal release process with changes in surface oxide properties. All grades, independent of media, revealed a time-dependent metal release process with a preferential low release of iron and manganese compared to nickel and chromium while the chromium content of the surface oxide increased slightly. Manganese was detected in the surface oxide of all grades, except the grade of the lowest manganese bulk content. No nickel was observed in the outermost surface oxide. Stainless steel grades of the lowest chromium content (approximately 16 wt%) and highest manganese content (approximately 7-9 wt%), released the highest quantity of alloy constituents in total, and vice versa. No correlation was observed between the release rate of manganese and the alloy composition. Released main alloy constituents were neither proportional to the bulk alloy composition nor to the surface oxide composition.     

Compact semi-automatic incident sampler for personal monitoring of volatile organic compounds in occupational air

Suddenly occurring and time limited chemical exposures caused by unintended incidents might pose a threat to many workers at various work sites. Monitoring of exposure during such occasional incidents is challenging. In this study a compact, low-weight and personal semi-automatic pumped unit for sampling of organic vapor phase compounds from occupational air during sporadic and suddenly occurring incidents has been developed, providing simple activation by the worker potentially subjected to the sudden occurring exposures when a trained occupational hygienist is not available. The sampler encompasses a tube (glass or stainless steel) containing an adsorbent material in combination with a small membrane pump, where the adsorbent is capped at both ends by gas tight solenoid valves. The sampler is operated by a conventional 9 V battery which tolerates long storage time (at least one year), and is activated by pulling a pin followed by automatic operation and subsequent closing of valves, prior to shipping to a laboratory. The adjustable sampling air flow rate and the sampling time are pre-programmed with a standard setting of 200 mL min(-1) and 30 min, respectively. The average airflow in the time interval 25-30 min compared to average airflow in the interval 2-7 min was 92-95% (n = 6), while the flow rate between-assay precisions (RSD) for six different samplers on three days each were in the range 0.5-3.7%. Incident sampler recoveries of VOCs from a generated VOC atmosphere relative to a validated standard method were between 95 and 102% (+/-4-5%). The valves that seal the sampler adsorbent during storage have been shown to prevent an external VOC atmosphere (500 mg m(-3)) to enter the adsorbent tube, in addition to that the sampler adsorbent is storable for at least one month due to absence of ingress of contaminants from internal parts. The sampler was also suitable for trapping of semi-volatile organophosphates.     

Peak exposures in aluminium potrooms: instrument development and field calibration

Aluminium smelter potrooms are unique in that workplace exposures to hydrogen fluoride (HF), sulfur dioxide (SO2), and particulate matter occur simultaneously for some tasks. The peak exposures to these contaminants are of increasing interest in discovering the etiology of respiratory health effects. While a variety of direct-reading instruments are available for sulfur dioxide and particulate matter, only a few exist for hydrogen fluoride. The sensors in these HF instruments have a cross-sensitivity to sulfur dioxide making it difficult to monitor HF in an environment that also contains SO2. To overcome this problem, we assessed the simultaneous use of two electrochemical instruments: one with a SO2 sensor that does not respond to HF and the second with a hydrogen fluoride sensor that responds to both HF and SO2 in a 1 : 1 ratio, termed 'total acid gas'. The difference in the response between the two instruments should indicate the HF concentration: [HF + SO2] minus SO2 equals HF. The performance characteristics of this sampling train were evaluated in the laboratory through the generation of both HF and SO2 with permeation tubes. The response and recovery times for the SO2 only instrument were acceptable (6 and 15 s, respectively), but the "total acid gas" instrument exhibited both slow response and slow recovery approaching three and six min. The association between the traditional integrated filter sampling method and the direct-reading instrument for SO2 is 0.80 (Spearman's rho). The use of the digital filter strengthens the association between the HF direct-reading instrument and the integrated samples from 0.41 to 0.68.     

Remediation of drinking water contaminated with arsenic by the electro-removal process using different metal electrodes

The purification of water by the electro-removal process using different metal electrodes is widely used in different spheres of science and industry. The comparative characteristics under galvanostatic conditions of zinc (Zn), brass (Cu-Zn), copper (Cu) and iron (Fe) anodes for arsenic (As) removal from water by the electro-removal process in laboratory scale experiments were determined at current densities of 1.5, 3 and 12 mA cm(-2) for 60 min, from a solution containing different concentrations of As(v) (from 70 to 130 microg L(-1)). The results at these different current densities indicated that rapid arsenic removal was achieved at higher current densities (12 mA cm(-2)), with the chemical precipitation of arsenate complexes. The removal of As was relatively efficient, with the following tendency (at 1.5 mA cm(-2)): Fe (>93%) congruent with Zn (>93%) > Cu-Zn (>73%) >Cu (>67%), these efficiencies were relatively independent of the removal rate for all the initial arsenic concentrations investigated. This behaviour is attributed to the electrochemical intrinsic properties of the most active metals, and to the chemical precipitation reactions following the electrochemical process, iron being the most attractive metal for arsenic removal for practical applications.     

A sampling method to determine insecticide residues on surfaces and its application to food-handling establishments

Known amounts of acephate, chlorpyrifos, and diazinon were applied to Formica, unfinished plywood, stainless steel, and vinyl tile. Cotton-ball and dental wick materials were dipped in 2-propanol and swiped over the treated surface area two time. More acephate was found on the second swipe compared to the first from vinyl tile, similar amounts on both swipes from plywood, and less on the second swipe from formica and stainless steel. The ratio of chlorpyrifos on Swipe 1 compared to Swipe 2 found with cotton-ball on both formica and stainless steel surfaces was equivalent (6:1), but a considerable difference was seen when two dental wick swipes were used. Residues of diazinon removed from formica and stainless steel were equivalent, regardless of the swiping material used. Residues of chlorpyrifos were detected by taking swipes of surfaces in two restaurants and a supermarket up to 6 mo after a prescribed application by a commercial pest control firm. The data show that measurable amounts of chloropyrifos can be detected on surfaces not treated with the insecticide for at least 6 mo.     

Characterization of individual aerosol particles in workroom air of aluminium smelter potrooms

Aerosol particles with aerodynamic diameters between 0.18 and 10 microm were collected in the workroom air of two aluminium smelter potrooms with different production processes (Soderberg and Prebake processes). Size, morphology and chemical composition of more than 2000 individual particles were determined by high resolution scanning electron microscopy and energy-dispersive X-ray microanalysis. Based on chemical composition and morphology, particles were classified into different groups. Particle groups with a relative abundance above 1%(by number) include aluminium oxides, cryolite, aluminium oxides-cryolite mixtures, soot, silicates and sea salt. In both production halls, mixtures of aluminium oxides and cryolite are the dominant particle group. Many particles have fluoride-containing surface coatings or show agglomerations of nanometer-sized fluoride-containing particles on their surface. The phase composition of approximately 100 particles was studied by transmission electron microscopy. According to selected area electron diffraction, sodium beta-alumina (NaAl(11)O(17)) is the dominant aluminium oxide and cryolite (Na(3)AlF(6)) the only sodium aluminium fluoride present. Implications of our findings for assessment of adverse health effects are discussed.     

扩散电化学法现场测定高湿度烟气中低浓度二氧化硫能力的 研究

根据目前定电位电解法出现的问题,对扩散电化学法测定固定污染源高湿度烟气中低浓度二氧化硫的能力展开研究。结果显示,扩散电化学法测定值与参比值保持较好的一致性,说明该方法不受固定污染源烟气浓度、湿度以及负压等因素的影响,对高湿烟气中低浓度二氧化硫具备较强测定能力,非常适合该状况下SO₂的现场测定。但是方法也受传感器制约,适用范围受到限制。     

Estimates of total polychlorinated biphenyl (PCB) compounds in soils/sediments by hydrogenolysis to dicyclohexyl

A method to determine the total PCB content by hydrogenolysis (hydrodechlorination and hydrogenation) of chlorinated biphenyl compounds was extended to natural particulate matrices (soil and sediment). The contaminated soil was suspended in hexane in the presence of Pd/gamma-Al2O3 in a hydrogen atmosphere then permitted to react for one hour at 65 degrees C. Dicyclohexyl, recovered in the hexane, was quantified by gas chromatography mass spectrometry. The reaction was very efficient for soil/sediment in hexane suspension and virtually complete provided that excess catalyst was added to samples that were burdened with higher PCB loadings prior to reaction otherwise some partial hydrogenation of biphenyl was also observed. The proposed method was validated with the analysis of five certified reference materials.     

Suggested protocol for collecting, handling and preparing peat cores and peat samples for physical, chemical, mineralogical and isotopic analyses

For detailed reconstructions of atmospheric metal deposition using peat cores from bogs, a comprehensive protocol for working with peat cores is proposed. The first step is to locate and determine suitable sampling sites in accordance with the principal goal of the study, the period of time of interest and the precision required. Using the state of the art procedures and field equipment, peat cores are collected in such a way as to provide high quality records for paleoenvironmental study. Pertinent field observations gathered during the fieldwork are recorded in a field report. Cores are kept frozen at -18 degree C until they can be prepared in the laboratory. Frozen peat cores are precisely cut into 1 cm slices using a stainless steel band saw with stainless steel blades. The outside edges of each slice are removed using a titanium knife to avoid any possible contamination which might have occurred during the sampling and handling stage. Each slice is split, with one-half kept frozen for future studies (archived), and the other half further subdivided for physical, chemical, and mineralogical analyses. Physical parameters such as ash and water contents, the bulk density and the degree of decomposition of the peat are determined using established methods. A subsample is dried overnight at 105 degree C in a drying oven and milled in a centrifugal mill with titanium sieve. Prior to any expensive and time consuming chemical procedures and analyses, the resulting powdered samples, after manual homogenisation, are measured for more than twenty-two major and trace elements using non-destructive X-Ray fluorescence (XRF) methods. This approach provides lots of valuable geochemical data which documents the natural geochemical processes which occur in the peat profiles and their possible effect on the trace metal profiles. The development, evaluation and use of peat cores from bogs as archives of high-resolution records of atmospheric deposition of mineral dust and trace elements have led to the development of many analytical procedures which now permit the measurement of a wide range of elements in peat samples such as lead and lead isotope ratios, mercury, arsenic, antimony, silver, molybdenum, thorium, uranium, rare earth elements. Radiometric methods (the carbon bomb pulse of (14)C, (210)Pb and conventional (14)C dating) are combined to allow reliable age-depth models to be reconstructed for each peat profile.