Spatial distribution and metal contamination in the coastal sediments of Al-Khafji area,Arabian Gulf,Saudi Arabia

To document the spatial distribution and metal contamination in the coastal sediments of the Al-Khafji area in the northern part of the Saudi Arabian Gulf, 27 samples were collected for Al, V, Cr, Mn, Cu, Zn, Cd, Pb, Hg, Sr, As, Fe, Co, and Ni analysis using inductively coupled plasma-mass spectrometer (ICP-MS). The results revealed the following descending order of the metal concentrations: Sr > Fe > Al > As > Mn > Ni > V > Zn > Cr > Cu > Pb > Co > Hg > Cd. Average levels of enrichment factor of Sr, As, Hg, Cd, Ni, V, Cu, Co, and Pb were higher than 2 (218.10, 128.50, 80.94, 41.50, 12.31, 5.66, 2.95, 2.90, and 2.85, respectively) and that means the anthropogenic sources of these metals, while Al, Zn, Cr and Mn have enrichment factor less than 2, which implies natural sources. Average values of Sr, Hg, Cd, Cr, Ni, and As in the coastal sediments of Al-Khafji area were mostly higher than the values recorded from the background shale and earth crust and from those results along coasts of the Caspian Sea and the Mediterranean Sea. The highest levels of Cu in the northern part of the studied coastline might be due to Al-Khafji desalination plant, while levels of Al, Ni, Cr, Fe, Mn, Pb, and Zn in the central part may be a result of landfilling and industrial sewage. The highest levels of As, Cd, Co, Cu, Hg, and V in the southern part seem to be due to oil pollutants from Khafji Joint Operations (KJO). The higher values of Sr in the studied sediments in general and particularly in locality 7 could relate to the hypersalinity and aragonitic composition of the scleractinian corals abundant in that area.     

Assessment of metal pollution in urban road dusts from selected highways of the Greater Toronto Area in Canada

Over the last several decades, there has been increased attention on the heavy metal contamination associated with highways because of the associated health hazards and risks. Here, the results are reported of an analysis of the content of metals in roadside dust samples of selected major highways in the Greater Toronto Area of Ontario, Canada. The metals analysed are lead (Pb), zinc (Zn), cadmium (Cd), nickel (Ni), chromium (Cr), copper (Cu), manganese (Mn), calcium (Ca), potassium (K), magnesium (Mg) and iron (Fe). In the samples collected, the recorded mean concentrations (in parts per million) are as follows: Cd (0.51), Cu (162), Fe (40,052), Cr (197.9), K (9647.6), Mg (577.4), Ca (102,349), Zn (200.3), Mn (1202.2), Pb (182.8) and Ni (58.8). The mean concentrations for the analysed samples in the study area are almost all higher than the average natural background values for the corresponding metals. The geo-accumulation index of these metals in the roadside dust under study indicates that they are not contaminated with Cr, Mn and Ca; moderately contaminate with Cd and K; strongly contaminated with Fe and Mg; strongly to extremely contaminated with Ni and Pb; and extremely contaminated with Cu and Zn. The pollution load index (PLI) is used to relate pollution to highway conditions, and the results show that PLI values are slightly low at different samples collected from Highways 401 and 404 and high in many samples collected from Highway 400 and the Don Valley Parkway. Highway 400 exhibits the highest PLI values.     

Major and trace element contents in apples from a cultivated area of central Greece

Forty-two soil and apple samples from central Greece were collected and analyzed with regards to the content in major (Ca, Fe, K, Mg, Na, P, and S) and trace elements (As, B, Ba, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, Sc, Se, Sr, Ti, and Zn). Soil samples were analyzed by inductively coupled plasma atomic emission spectrometry, while for the apples inductively coupled plasma mass spectrometry was implemented. Several elements such as As, B, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Se, Ti, and Zn, represent high concentrations in apples from the study area. These relatively high concentrations may be a consequence of the local geology, along with the excessive application of agricultural products such as fertilizers and agrochemicals.     

Metal concentrations in deciduous tree leaves from urban areas in Poland

Accumulation of metals in deciduous tree foliage fromurban areas in western-south Poland was monitored duringthe vegetation season of 2000 year. Concentrations of Al,Ba, Ca, Cd, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Sr, Ti and Znwere measured in birch, willow, linden and maple leavesusing the ICP-AES method. Seasonal variations of metalconcentrations and their relations with sampling sitewere investigated. The most dynamic accumulation of Al,Cd, Cr, Ni and Pb was observed for examined species. Thehighest differences in element concentrations forinvestigated sites were found for Ba, Cd, Mn and Ni.Interelement correlations were investigated. In allfoliar samples synergistic relationships between Al–Crand Ca-Sr were found. Statistically significant negativecorrelations were observed only for Cd and Ti in birch leaves.     

Assessment of heavy metal levels in sediment samples of Kapulukaya Dam Lake (Kirikkale) and lower catchment area

In this study, the concentrations of 13 elements (Al, Fe, Mn, Cr, Ni, Zn, Co, As, Pb, Cu, Mo, Hg, and Cd) were determined in the sediments of three different sites in the Kapulukaya Dam Lake between May 2007 and November 2008. They ranged from 1.47 to 4.64 for Al, 0.92 to 3.48 for Fe (in percent), 326.60 to 1053.00 for Mn, 98.00 to 1,116.00 for Cr, 24.70 to 127.10 for Ni, 14.80 to 124.20 for Zn, 11.0 to 43.20 for Co, 5.00 to 29.30 for Cu, 9.10 to 69.70 for As, 8.60 to 34.00 for Pb, 2.50 to 5.20 for Mo, 1.00 to 1.60 for Hg, and 0.50 to1.80 for Cd in microgram per gram dry weight sediment. The contamination degree of the sediment was assessed on the basis of enrichment factor and corresponding sediment quality guideline. The calculated enrichment factors (EF, measured metal vs. background concentrations) indicated that the effect of man-made activities on the occurrence of concentrations could be accounted for the majority of heavy metals namely Mn, As, Ni, Cu, Zn, Cr, Co, Mo, and Cd, whereas such affect was not detected for Hg and Pb. The maximum values of the EF were represented by As, minimum values by Hg at all sites. Mean EF values were 36.60 and 0.70 for As and Hg, respectively. This study has clearly assessed a certain level of heavy metal pollution in the region, based particularly on the findings from sediment.     

Element content of propolis collected from different areas of South Spain

The aim of this work is to determine the content of essential and toxic elements in 25 raw propolis samples, when considering pollution agents and geographical and botanical factors. The microwave-assisted digestion was the most reliable and accurate method for determination of inorganic elements in propolis samples. The results were obtained using certified reference materials in a good agreement with certified values. Inductively coupled plasma atomic emission spectroscopy was used for the determination of 23 macro- and microelements (Ag, Al, As, B, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, P, Pb, S, Sb, Se, Si, Sn, and Zn). A Mercury analyzer was also utilized for the detection of the total Hg. Among the analyzed metals, Ca, K, Mg, Zn, Si, S, Fe, Al, P, and Na were found to be the most predominant. Heavy metals (As, Cd, Hg, and Pb) were determined in minimal concentration, and Pb was the highest mean contained toxic (<3.80 mg/kg), without influence on provisional tolerable weekly intake values. The method can be applied for routine analysis and quality and environmental pollution controls of toxic elements in propolis samples. The results obtained indicate no pollution of the collection areas and naturally high concentration of Al (460?±?62.2 mg/kg).     

Spatial and temporal trace metal distribution of a Peruvian basin: recognizing trace metal sources and assessing the potential risk

Recent efforts have been made to determine the environmental impact of mining over the past 11 years in the Jequetepeque River basin, in northern Peru. We have now analyzed data from two studies to elucidate the spatial and temporal trace metal distributions and to assess the sources of contamination. These two studies were carried out from 2003 to 2008 by a Peruvian government administration and from 2008 to 2010 by us. We analyzed 249 samples by principal component analysis, measuring: pH, electrical conductivity, total dissolved solids, total suspended solids, chloride, weak-acid-dissociable cyanide, total cyanide, nitrite and nitrate, ammonium, sulfate, and trace metals and metalloids (Al, As, Ca, Cd, Cu, Cr, Fe, Mg, Mn, Ni, Pb, and Zn). Within the spatial distribution of the basin, the highest Al, As, Cu, Fe, Ni, and Pb concentrations were found at the closest point to the mine sites for both periods of time, with the higher peaks measured during the first years of the sampling data. Temporal trends showed higher concentrations of Cu and Fe in samples taken before 2005, at which point the two mines were closed. Risk assessment was quantified by the hazard quotient as related to water ingestion. The risk for human health posed by the concentrations of several trace metals and metalloids was found to be highly adverse (As and Cr), significant (Al, Cd, Cu, Fe, and Pb), or minimal (Ni and Zn).     

Fractionation of eleven elements by chemical bonding from airborne particulate matter collected in an industrial city in Argentina

A four-step chemical sequential extraction procedure was used to evaluate the distribution of Al, As, Cr, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn in airborne particulate matter collected on glass fibre filters using a high-volume sampler. Two sets of samples were collected in 2001 (winter and summer campaigns) in representative zones of an industrial city of Argentina. The leaching scheme was applied to PM-10 particles and consisted in extracting the elements in four fractions, namely soluble and exchangeable elements; carbonates, oxides and reducible elements; bound to organic matter and sulfidic metals; and residual elements. Metals and metalloids at microg g(-1) level were determined in each fraction by inductively coupled plasma optical emission spectrometry (ICP OES). Analyte concentration varied from 14 microg g(-1) (equivalent to 1.0 ng m(-3)) for As to 11.8 mg g(-1) (equivalent to 2,089 ng m(-3)) for Al. Seven elements, namely Al, Cr, Fe, Mn, Pb, Ti and Zn showed similar distributions in both seasons while As was distributed in a significantly different manner in each season. The results exhibited low As contents in the first and second fractions that could be associated with routine coal combustion and a high content in the third and fourth fractions of the summer samples that could be linked to the use of pesticides. Aluminium, As, Cu, Mn, Ni, Ti, V and Zn were found in different percentages in the more bioavailable aqueous fraction with As, Mn, V and Zn exhibiting solubilities greater than 1% while Cr and Pb being insoluble. The content of Al, Cr, Cu, Fe, Ni, Pb, and Zn in the residual fraction was, in average, higher than 50%. A comparative assessment of the use of the underlying information available from fractionation studies compared to that obtained from total element content was done for Fe and Mn. It showed that the results obtained using chemical sequential extraction procedures allowed further discrimination of the potential air pollution sources.     

Chemometric study on the trace metal accumulation in the sediments of the Cochin Estuary―Southwest coast of India

The distribution and accumulation of trace metals in the sediments of the Cochin estuary during the pre-monsoon, monsoon and post-monsoon periods were investigated. Sediment samples from 14 locations were collected and analysed for the metal contents (Mg, Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd and Pb), organic carbon, total nitrogen, total sulphur and grain size. The data were processed using statistical tools like correlation, factor and cluster analysis. The study revealed an enrichment of Cd and Zn in the study area particularly at station 2, which is confirmed by enrichment factor, contamination factor and geoaccumulation index. The factor analysis revealed that the source of Cd and Zn may be same. The study indicated that the spatial variation for the metals like Mg, Cr, Fe, Co, Ni, Cu, Zn, Cd and Pb were predominant unlike Mn which shows a temporal variation. The strong association of trace metals with Fe and Mn hydroxides and oxides are prominent along the Cochin estuary. The anthropogenic inputs of industrial effluents mainly control the trace metals enrichment in the Cochin estuary.     

抚顺市PM10中元素分布特征及来源分析

为了确定抚顺市PM10中元素的浓度特征及其来源,于2006—2007年的采暖季、风沙季和非采暖季在抚顺市的6个采样点采集PM10样品,并用等离子体原子发射光谱法(ICP-AES)测定样品中Ti、Al、Mn、Mg、Ca、Na、K、Cu、Zn、As、Pb、Cr、Ni、Co、Cd、Fe、V等17种元素的含量。结果表明,Al、Mg、Ca、Na、K、Mn、Fe等地壳元素在17种元素中占有较大比重,全年平均达到97.0%。富集因子分析结果表明,Cu、Zn、Pb、Cr、Co、Cd等元素在各季和各采样点明显受到人为活动影响,是典型的污染元素。主因子分析结果显示,土壤风沙尘、建筑尘、燃煤尘、道路扬尘、机动车尾气排放、金属冶炼、锰、铜、钛工业源是抚顺市PM10中元素的主要来源。     

Season variations for metallic elements compositions study in plant Bidenens pilosa L. var. radiate Sch. in central Taiwan

The possibility of using Bidens pilosa L. var. radiate Sch leaves as environmental indicators of metallic element pollution has been investigated. Samples were analyzed with respect to the following pollutants: Zn, Mn, Cu, Ni, Pb, Cd, Cr, Fe, Ca, and Mg by using inductively coupled plasma atomic emission spectrometry. The results obtained on the metallic elements had the following average composition order: Ca > Mg > Fe, Mn > Zn > Cu > Ni > Pb > Cr > Cd for plant B. pilosa L. var. radiate Sch. at HK sampling site. In addition, the metallic elements had the following average composition order: Ca > Mg > Fe > Mn, Zn > Cu > Ni > Pb > Cr > Cd for plant B. pilosa L. var. radiate Sch. at TMP sampling site. Finally, the metallic elements had the following average composition order: Ca > Mg > Fe > Zn > Mn > Cu > Pb > Ni > Cr > Cd for plant B. pilosa L. var. radiate Sch. at LH sampling site. The seasonal average composition for metallic elements Mg, Fe, and Pb were ranked highest at HK sampling site in winter. In addition, seasonal average composition for metallic elements Mn, Zn, and Cd were ranked highest at TMP sampling site in winter. Finally, seasonal average composition for metallic elements Mg, Fe, and Cu were ranked highest at LH sampling site in spring.     

Metal Pollution Assessment of Sediment and Water in the River Hindon, India

The metal pollution in water and sediment of the River Hindon in western Uttar Pradesh (India) was assessed for Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn. The metal concentrations in water showed wide temporal variation compared with bed sediment because of variability in water discharge and variations in suspended solid loadings. Metal concentrations in bed sediments provided a better evaluation of the degree and the extent of contamination in the aquatic environment, Santagarh and Atali being the most polluted sites of the river. The ratio of heavy metals to conservative elements (Fe, Al, etc.) may reveal the geochemical imbalances due to the elevated metal concentrations normally attributed to anthropogenic sources. Metal/Al ratios for the bed sediments of the river Hindon were used to determine the relative mobility and general trend of relative mobility occurred Fe > Mn > Zn > Cr > Ni > Pb > Cu > Cd.     

Spatial distribution of trace metals (Cd, Pb, Hg, Cu, Zn, Fe and Mn) and oligo-elements (Mg, Ca, Na and K) in surface sediments of the Gulf of Tunis (Northern Tunisia)

The purpose of this paper is to evaluate the levels and spatial distribution of trace metals (Cd, Pb, Cu, Hg, Zn, Fe, and Mn), oligo-elements (Mg, Ca, Na and K), total organic carbon (TOC), and total nitrogen (TN) in the fine fraction of surface sediments collected from 38 stations in Gulf of Tunis (Mediterranean Sea, Northern Tunisia) between 2004 and 2005. The results showed that metals, oligo-elements, TOC, and TN concentrations in the sediments of the Gulf of Tunis are generally low compared to those found in other similar coastal marine areas. The spatial distribution of metals showed areas of major accumulation of Pb, Cd, Cu, Fe, and Zn in the central area of the Gulf and near the Mejerda River. The marine currents are influencing factors on metal accumulation in sediments. The principal component analysis applied to our elemental analytical results showed that there is a positive correlation between Fe, Zn, Cu, and Pb. These metals have a stronger affinity with site connection in the sediments than Ca and Mn.     

Essential and toxic elements in infant foods from Spain, UK, China and USA

Spanish gluten-free rice, cereals with gluten, and pureed baby foods were analysed for essential macro-elements (Ca and Na), essential trace elements (Fe, Cu, Zn, Mn, Se, Cr, Co and Ni) and non-essential trace elements (As, Pb, Cd and Hg) using ICP-MS and AAS. Baby cereals were an excellent source of most of the essential elements (Ca, Fe, Cu, Mn and Zn). Sodium content was high in pureed foods to improve their flavour; fish products were also rich in Se. USA pure baby rice samples had the highest contents of all studied essential elements, showing a different nutrient pattern compared to those of other countries. Mineral fortification was not always properly stated in the labelling of infant foods. Complementary infant foods may also contain significant amounts of contaminants. The contents of Hg and Cd were low enough to guarantee the safety of these infant foods. However, it will be necessary to identify the source and reduce the levels of Pb, Cr and As in Spanish foods. Pure baby rice samples contained too much: Pb in Spain; As in UK; As, Cr and Ni in USA; and Cr and Cd in China.     

Assessment of heavy metal contamination in Candarli Gulf sediment, Eastern Aegean Sea

Concentrations of selected heavy metals (Fe, Mn, Ni, Cu, Zn, Pb, Hg, Cr, Al, and As) in surface sediments from 18 stations in the Candarli Gulf were studied in order to understand current metal contamination due to urbanization and economic development in Candarli region, Turkey. The sediment samples were collected by box corer in Candarli Gulf in 2009 to assess heavy metal pollution. Heavy metal concentrations in surface sediment varied from 1.62% to 3.60% for Fe, 0.38?C2.53% for Al, 173?C1,423 for Mn, 8?C100 for Ni, 3?C46 for Cu, 55?C119 for Zn, 16?C138 for Pb, 0.2?C6.3 for Hg, 16?C71 for Cr, and 11?C37 mg kg^???1 for As. This study showed that the concentrations of Mn, Ni, Zn, Pb, Hg, and Cr in the surface sediment layers were elevated when compared with the subsurface layers. Both metal enrichment and contamination factors show that Hg, Zn, and Pb contamination exists in the entire study area and contamination of other metals is also present in some locations depending on the sources.     

Statistical apportionment and risk assessment of selected metals in sediments from Rawal Lake (Pakistan)

The present study was carried out in order to evaluate the statistical apportionment and risk assessment of selected metals (Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Na, Pb, Sr, and Zn) in freshly deposited sediments in Rawal Lake, Pakistan. Composite sediment samples were collected, oven-dried, grounded, homogenized, and processed to assess the water-soluble and acid extractable concentrations of the metals in the water extract and acid extract of the sediments using flame atomic absorption spectrophotometer. Statistical methods were used to identify the possible sources of the metals. Sediment quality guidelines and potential acute toxicity were used to evaluate the ecotoxicological sense of selected metals. Non-carcinogenic health risk assessment was also carried out to determine the potential adverse health risks to the inhabitants. Relatively higher concentration was noted for Ca, Fe, Mg, Na, K, Mn, and Sr in the sediment samples. Principal component analysis and cluster analysis revealed anthropogenic contributions of Cd, Pb, Cr, Mn, Fe, and Li in the sediments. Enrichment factors of the metals in sediments showed severe to moderate enrichment of Cd, Pb, Ca, Fe, Li, Mn, and Sr. Geoaccumulation indices and contamination factors evidenced significant contamination by Cd and Pb, although, on the whole, low degree of contamination was noted. The levels of some metals exceeded the sediment quality guidelines, which revealed frequently adverse biological effects to the dwelling biota in the aquatic ecosystem. The sediments were found to be significantly contaminated by Cd, Pb, Cr, Mn, Fe, and Li.     

Characterization of particulate matter and its related metal toxicity in an urban location in South West India

This study reports the quantification of the toxicity of particulate matter (PM)-bound metals and their possible associated risks to human health. For assessment of PM, 24-h samples of PM₁₀ and PM_2.5 were collected by Mini Vol-TAS sampler at an urban site of Pune. Samples were sequentially extracted with ultrapure water and concentrated HNO₃ and analyzed for “soluble” and “total” metals. Factor analysis identified the resuspension of road dust due to traffic, biomass burning, construction activities, and wind-blown dust as possible sources that played an important role for overall pollution throughout the year. Water-soluble proportion was found to be ≤20 % for Cr, Co, Fe, and Al; ≥50 % for Sr, Cd, Ca, and Zn; and a substantial proportion (～25–45 %) for Mn, Ba, K, Na, Ni, Mg, Cu, and Pb metals in PM₁₀. For PM_2.5, the water-soluble proportion was ≤20 % for Fe, Co, Ni, Cr, and Al, while Sr, K, and Cd were mostly soluble (>50 %) and Cu, Ba, Mn, Ca, Zn, Pb, Na, and Mg were substantially soluble (～25–45 %). In the present study, among the toxic metals, Cd and Pb show higher concentration in the soluble fraction and thus represent the higher bioavailability index and especially are harmful to the environment and exposed person. Risk calculations with a simple exposure assessment method showed that the cancer risks of the bioavailable fractions of Cr, Cd and Ni were greater than the standard goal.     

Distribution and Fractionation of Heavy Metals in Solid Waste from Selected Sites in the Industrial Belt of Delhi, India

Solid waste samples were collected from five small-scale industrial sites in the National Capital Territory (NCT) of Delhi. These industrial sites represent the regional spread of the industrial belt in the NCT of Delhi. Solid waste samples were digested using aqua-regia and HF in air tight teflon bombs for the quantitative analysis of heavy metals (Hg, Pb, Cd, Mn, Fe, Ni, Cu and Zn) by GBC model 902 atomic absorption spectrophotometer. Hg was analysed using hydrid generator attachment. Beside this sequential extraction was used to fractionate five heavy metals (Pb, Ni, Cd, Cu and Zn) into six operationally defined phases, viz. water soluble, exchangeable, carbonate-bound, Fe-Mn oxides, organic-bound and residual fractions to ascertain the relative mobility of these metals. The result obtained showed metal concentration to be in the range of Hg 0.42-2.3; Pb 23-530; Cd 014-224; Mn 494-19 964; Fe 35 684-233 119; Ni 192-1534; Cu 3065-10 144 and Zn 116-23 321 (all units in mg kg(-1)) in all the industrial areas studied. The fractionated toxic metals like Pb, Ni and Cd were observed to be in the range of 25-35, 15-50 and 40-50%, respectively, in mobile or bio-available fractions of solid waste. As this waste is often disposed-off by the roadsides, low lying areas, abandoned quarries or in landfill sites which are often not properly planned, thus posing potential risk to ground and surface water quality to millions of people living downstream.     

Evaluation of metal contamination in sediments from north of Morocco: geochemical and statistical approaches

Concentrations of Fe, Mn, Cr, Cu, Ni, Pb, Zn, Cd and Hg were evaluated in surface sediments of two rivers from north of Morocco, known as Souani and Mghogha rivers. Significantly higher concentrations in mg kg^???1 dry weight (dw) of Mn (747.6 vs. 392.9), Cr (86.4 vs. 56.3), Zn (299.5 vs. 138.5) were found in sediment samples from Mghogha when compared with Souani river. Average concentrations of Cd and Hg in several sediment samples from both rivers were above the effect range median that predicts toxic effects to aquatic organisms. The calculation of enrichment factors showed that Mn, Cr, Cu and Ni were depleted, whereas Pb and Hg were enriched. The results of geoaccumulation index revealed that sediments of both rivers were unpolluted with most of the metals and moderately contaminated with Fe and Hg. Some of elevated concentrations of Hg, principally in Mghogha River, were due to anthropogenic sources including the direct discharges of industrial zone.     

Assessment of trace metal pollution in surface sediments of Nemrut Bay, Aegean Sea

Surface sediments collected from nine stations in Nemrut Bay, Aegean Sea were analyzed for trace metals (Hg, Cd, Pb, Cr, Cu, Zn, Mn, Ni, Fe, As, and Mg) and grain sizes. The results were compared with the numerical sediment guidelines used in North America as well as literature values reported for similar studies conducted in Izmit Bay and Izmir Bay. The metal levels were also evaluated according to the enrichment factor and contamination factor analyses. The analyses revealed significant anthropogenic pollution of Hg, Pb, Zn, and As in the surficial sediments of Nemrut Bay.