Impact of poor solid waste management on ground water

Eight sediment cores recovered from Tamaki Estuary were analysed for Cu, Pb, Zn, and Cd using downward cored sub-samples. The results indicate a significant upward enrichment in heavy metals with the highest concentrations found in the uppermost 0–10 cm layer. Assessment of heavy metal pollution in marine sediments requires knowledge of pre-anthropogenic metal concentrations to act as a reference against which measured values can be compared. Pristine values for the cored sediments were determined from flat “base-line” metal trends evident in lower core samples. Various methods for calculating metal enrichment and contamination factors are reviewed in detail and a modified and more robust version of the procedure for calculating the degree of contamination is proposed. The revised procedure allows the incorporation of a flexible range of pollutants, including various organic species, and the degree of contamination is expressed as an average ratio rather than an absolute summation number. Comparative data for normalized enrichment factors and the modified degree of contamination show that Tamaki Estuary sediments have suffered significant systematic heavy metal contamination following catchment urbanization. Compared to baseline values the uppermost sediment layers show four-fold enrichment averaged across eight cores and four analysed metals.     

Anthropogenic pollution and variability of manganese in alluvial sediments of the Yellow River,Ningxia, northwest China

Heavy metal pollution of sediments is a global concern and can be a serious problem in heavily industrialized parts of the world. Pollution by manganese is particularly common due to its ubiquitous natural occurrence, ease of mobilization, and extensive association with industry. In Ningxia, China, manganese pollution of Yellow River alluvial sediments was assessed by comparing manganese concentrations in 35 sediment samples with background values derived from similar sediments obtained at sites considered remote from potential sources of contamination. Natural background values of manganese were found to range from 192 to 323 mg/kg for surface sediments, and from 220 to 325 and 283 to 394 mg/kg for subsurface sediments at depths of 45–50 and 95–100 cm, respectively. In the study area, manganese content ranged from 565 to 1,363 mg/kg, indicating anthropogenic pollution extending to a depth of at least 1 m in the study area. All 35 samples were found to exceed the threshold effect concentration (TEC) of 460 mg/kg, below which adverse effects on sediment-dwelling organisms are not expected to occur, and one sample (T12) was found to exceed the probable effect concentration (PEC) of 1,100 mg/kg. PEC defines the threshold above which adverse effects are likely to be observed. Variogram analysis of the surface sediment manganese data revealed adherence to a Gaussian model, and ordinary kriging was used to generate a manganese distribution map. Analysis of the high nugget effect ratio indicates high, small-scale variations that are consistent with potential emissions from an adjacent electrolytic manganese plant.     

Elemental composition of sediments in Lake Jinzai, Japan: Assessment of sources and pollution

Bottom sediments from Lake Jinzai in southwest Japan were analyzed to determine their chemical compositions and to assess the potential for ecological harm by comparison with sediment quality guidelines. The pollution status of lake sediments was evaluated by employing contamination factor (CF), pollution load index (PLI), and geoaccumulation index (I(geo)), focusing on a suite of elements in lakebed and core sediments. Elevated concentrations of As, Pb, Zn, Cu, TOC, N, and P were present in several layers of the upper core and other surface sediments. The elevated metal concentrations are likely related to the fine-grained nature of the sediments, reducing bottom conditions produced by abundant organic matter, and possibly minor non-point anthropogenic sources. Moreover, correlations between the concentrations of trace metals and organic carbon, nitrogen, phosphorus, and iron, suggest that these elements play a role in controlling abundances. Calculated CF, PLI, and I(geo) indicate that the sediments are strongly polluted with respect to As, moderately to strongly polluted with Zn, and moderately polluted with Pb and Cu. Metal concentrations exceed the New York State Department of Environmental Conservation (NYSDEC) lowest effect level and the Canadian Council of Ministers of the Environment (CCME) interim sediment quality guidelines that indicate moderate impact on aquatic organisms in the study area.     

Indexing method for assessment of pollution potential of leachate from non-engineered landfill sites and its effect on ground water quality

Dumping of solid waste in a non-engineered landfill site often leads to contamination of ground water due to leachate percolation into ground water. The present paper assesses the pollution potential of leachate generated from three non-engineered landfill sites located in the Tricity region (one each in cities of Chandigarh, Mohali and Panchkula) of Northern India and its possible effects of contamination of groundwater. Analysis of physico-chemical properties of leachate from all the three landfill sites and the surrounding groundwater samples from five different downwind distances from each of the landfill sites were collected and tested to determine the leachate pollution index (LPI) and the water quality index (WQI). The Leachate Pollution Index values of 26.1, 27 and 27.8 respectively for landfill sites of Chandigarh (CHD), Mohali (MOH) and Panchkula (PKL) cities showed that the leachate generated are contaminated. The average pH values of the leachate samples over the sampling period (9.2 for CHD, 8.97 for MOH and 8.9 for PKL) show an alkaline nature indicating that all the three landfill sites could be classified as mature to old stage. The WQI calculated over the different downwind distances from the contamination sites showed that the quality of the groundwater improved with an increase in the downwind distance. Principal component analysis (PCA) carried out established major components mainly from natural and anthropogenic sources with cumulative variance of 88% for Chandigarh, 87.1% for Mohali and 87.8% for Panchkula. Hierarchical cluster analysis (HCA) identifies three distinct cluster types for the groundwater samples. These clusters corresponds to a relatively low pollution, moderate pollution and high pollution regions. It is suggested that all the three non-engineered landfill sites be converted to engineered landfill sites to prevent groundwater contamination and also new sites be considered for construction of these engineered landfill sites as the present dumpsites are nearing the end of their lifespan capacity.     

Statistical apportionment and risk assessment of selected metals in sediments from Rawal Lake (Pakistan)

The present study was carried out in order to evaluate the statistical apportionment and risk assessment of selected metals (Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Na, Pb, Sr, and Zn) in freshly deposited sediments in Rawal Lake, Pakistan. Composite sediment samples were collected, oven-dried, grounded, homogenized, and processed to assess the water-soluble and acid extractable concentrations of the metals in the water extract and acid extract of the sediments using flame atomic absorption spectrophotometer. Statistical methods were used to identify the possible sources of the metals. Sediment quality guidelines and potential acute toxicity were used to evaluate the ecotoxicological sense of selected metals. Non-carcinogenic health risk assessment was also carried out to determine the potential adverse health risks to the inhabitants. Relatively higher concentration was noted for Ca, Fe, Mg, Na, K, Mn, and Sr in the sediment samples. Principal component analysis and cluster analysis revealed anthropogenic contributions of Cd, Pb, Cr, Mn, Fe, and Li in the sediments. Enrichment factors of the metals in sediments showed severe to moderate enrichment of Cd, Pb, Ca, Fe, Li, Mn, and Sr. Geoaccumulation indices and contamination factors evidenced significant contamination by Cd and Pb, although, on the whole, low degree of contamination was noted. The levels of some metals exceeded the sediment quality guidelines, which revealed frequently adverse biological effects to the dwelling biota in the aquatic ecosystem. The sediments were found to be significantly contaminated by Cd, Pb, Cr, Mn, Fe, and Li.     

An assessment of metal contamination risk in sediments of Hara Biosphere Reserve,southern Iran with a focus on application of pollution indicators

The aim of this study was to assess the pollution status of metals in sediments of Hara Biosphere Reserve using pollution indicators. For this purpose, sediment samples from nine locations were collected and characterized for metal content (Pb, Cr, Zn, Cu, and Fe) using the total digestion technique. Comparison of metal concentrations with that of sediment quality guidelines (SQGs) demonstrated no association with negative biological effects for Cu and Zn, while the values of Pb and Cr mainly illustrated to have association with negative biological effects. The results of the geo-accumulation index (I _geo) indicated no contamination for Cr, Cu, Zn, and Fe, while the values of Pb demonstrated to have moderate contamination based on I _geo values. The analysis of the enrichment factor (EF) showed no enrichment for Cu and Zn and minor enrichment for Pb and Cr. Similar results were also found for quantification of contamination (QoC) analysis, where the values of Cu and Zn demonstrated to have a geogenic source of contamination, while the values of Pb and Cr mainly illustrated to have an anthropogenic source of contamination. According to EF and QoC calculations, the values of Cu and Zn were derived mainly from natural processes and exposure of material from the earth’s crust, while the values for Pb and Cr were enriched by anthropogenic activities. The results of the contamination factor (C _f ⁱ ) demonstrated low contamination levels for Fe, Cr, Zn, and Cu and moderate contamination levels for Pb. The pollution load index (PLI), showing the overall contamination of metals, demonstrated moderate pollution status in the study area.     

Evaluation of Clostridium perfringens as a tracer of sewage contamination in sediments by two enumeration methods

A traditional method of enumerating Clostridium perfringens using membrane filtration (MF) as an indicator of fecal contamination was compared to recently developed rapid method using Rapid Fung Double Tube (RFDT) in an evaluation to characterize the extent of sewage contamination in sediments of the Great Lakes. Evaluation of these two methods included determining C. perfringens concentrations and recovery efficiencies from sewage, sewage-spiked sediments, and water (surface and bottom) and sediment samples collected from two Great Lakes. The RFDT method proved to be a superior method for identifying C. perfringens in lake sediments compared to MF, as it had higher recovery efficiency and was more rapid, reliable, simple, and effective. This study provides biological evidence of the long-term deposition and movement of sewage particulates in the Great Lakes environment and demonstrates the potential usefulness of C. perfringens as a tracer for sewage contamination using a reliable enumeration method.     

滇池宝丰湾疏浚区底泥污染程度评价及环保疏浚深度的确定

根据滇池外海主要入湖河口及重点区域底泥疏浚工程,宝丰湾疏浚区设计阶段勘察结果,采用内梅罗污染指数法及Lars Hakanson的重金属潜在生态风险指数法对疏浚区底泥进行了污染程度评价。针对底泥污染空间分布特征,确定疏浚深度,为环保施工提供依据。     

Heavy metal enrichment in surface sediments from the SW Gulf of Mexico

The south west coastal zone in the Gulf of Mexico is an area with great industrial and agricultural development, which experiences intensive prospecting and extraction of hydrocarbons. After running through industrial, agricultural, and urban areas, waters from both the Jamapa River and La Antigua River arrive here. The rivers’ discharge areas of influence were estimated considering the textural and chemical composition of the supplied sediments. The main factors that determine sediment distribution were mineralogy, heavy minerals, carbonates, and anthropic contributions. The presence of metals in excess was evaluated using various pollution indicators, such as the enrichment factor, contamination factor, modified contamination factor, and geo-accumulation indexes. Data from different used contamination indexes show metal enrichments in As, Cu, Zn, Co, Cr, and V in La Antigua; As, Cu, and Cr in Jamapa; and As, Zn, and Pb in the Continental slope area. The adverse effects of metals on aquatic organisms were assessed using sediment quality guidelines that show Ni, As, Cu, and Cr may produce adverse effects on coastal areas. There was no evidence of contamination associated to the oil industry.     

应用地积累指数法评价南通市内河沉积物中重金属污染

对南通市51个沉积物样品中重金属Cu、Pb、Cr、Hg、As、Cd的质量浓度进行了测试,并用地积累指数法评价了河流沉积物的重金属污染。结果表明:南通市沉积物重金属基本上未受污染,只有元素As受到轻度污染。     

上海市黄浦江表层沉积物重金属污染评价

用沉积物富集系数法和Hakanson潜在生态风险评估法对上海市黄浦江表层沉积物重金属含量进行了评价。结果显示,沉积物中Cd、As和Pb含量富集程度较低,Hg和Cu含量富集程度较高;其分布特征为上游段含量相对较轻,到中游段有所上升,至下游段含量又有所下降,整体呈钟型分布,重金属含量分布规律可能与苏州河对黄浦江下游沉积物的影响和黄浦江中游段有工业污染排放输入有关;河口与内陆河流沉积物中重金属含量存在差异性,河口重金属含量明显下降;调查区37.5%的断面Hg含量潜在生态危害为中等;沉积物富集系数法可用来评价重金属累积程度,而潜在生态风险指数则突出对生物有很强毒性的重金属作用。     

Metal pollution records in core sediments of some Red Sea coastal areas, Kingdom of Saudi Arabia

In the last three decades, the industrial and human activities in the coastal area of Saudi Arabia have increased dramatically and resulted in the continuous invasion of different types of pollutants including heavy metals. Seven sediment cores were collected from three major industrialized areas; Jeddah, Rabigh and Yanbu, along the coast of Saudi Arabia to determine the spatial and temporal distribution of metals and to assess the magnitude of pollution and their potential biological effects. Sediments were analyzed for texture, calcium carbonate contents, organic matter and metals (Al, Fe, Mn, Cd, Cr, Cu, Ni, Pb and Zn). Some metals like, Cr, Mn, Ni and Zn, were enriched in the upper 15 cm of core samples (recent deposition of sediments). Cadmium concentrations showed high fluctuations with depth and reverse pattern to that for Al, Fe and Mn which indicated land based sources of this element to the studied areas. Elevated concentrations of lead were recorded in the bottom layers of cores in Jeddah that indicated the most dramatic increase in usage of gasoline in early 1970s. The calculated contamination factors (CF's) were found in the following sequences: Cd > Pb > Ni > Cu > Zn > Cr > Mn for all studied areas. Results of Pollution Load Index (PLI) revealed that Jeddah is the most polluted area, followed by Rabigh while Yanbu is the least contaminated area. Except for Ni, the concentrations of most metals in the majority of sediment samples were believed to be safe for living organisms. As no data were available on the concentration of metals in core sediments in the coastal area of Saudi Arabia, the results of this study would serve as a baseline against which future anthropogenic effects can be assessed.     

Water quality and heavy metal monitoring in water and sediment samples of the Küçükçekmece Lagoon, Turkey (2002–2003)

Physical and chemical parameters have been analyzed in water samples from a brackish water lagoon, Küçükçekmece, located on the western outskirts of Istanbul. Samples were collected every two months for a year from nine sampling stations. Of the parameters measured, temperature, pH, salinity, nitrate and phosphate showed changes when compared with the previously published data. The lagoon was found eutrophic as it was reported previously. Sulphate and COD levels were higher when compared with the standards established by the Turkish Water Pollution and Control Regulation. Additionally, concentrations of heavy metals (Cd, Co, Cr, Cu, Mn, Ni, Pb, Zn) in water and bottom sediments were measured and compared with the standards established by the Turkish Water Pollution and Control Regulation and with the previously published data. The results were analysed statistically with respect to location and any relationships between the concentration of the elements in corresponding water and sediment samples were examined. Principal Component Analysis of water samples allowed us to discriminate three areas affected mainly by heavy metal contamination, possibly due to industrial, commercial and/or urban activities. Generally, the concentrations of the heavy metals were higher at stations near the three estuaries, suggesting a direct influence of the three creeks on the pollution of the Küçükçekmece Lagoon. Although elevated levels of Cd were recorded in several water samples, it was not detected in sediment. On the other hand, a particularly high level of Cr pollution was recorded most of the water and sediment samples.     

Heavy metal assessment using geochemical and statistical tools in the surface sediments of Vembanad Lake, Southwest Coast of India

The geochemical distribution and enrichment of ten heavy metals in the surface sediments of Vembanad Lake, southwest coast of India was evaluated. Sediment samples from 47 stations in the Lake were collected during dry and wet seasons in 2008 and examined for heavy metal content (Al, Fe, Mn, Cr, Zn, Ni, Pb, Cu, Co, Cd), organic carbon, and sediment texture. Statistically significant spatial variation was observed among all sediment variables, but negligible significant seasonal variation was observed. Correlation analysis showed that the metal content of sediments was mainly regulated by organic carbon, Fe oxy-hydroxides, and grain size. Principal component analysis was used to reduce the 14 sediment variables into three factors that reveal distinct origins or accumulation mechanisms controlling the chemical composition in the study area. Pollution intensity of the Vembanad Lake was measured using the enrichment factor and the pollution load index. Severe and moderately severe enrichment of Cd and Zn in the north estuary with minor enrichment of Pb and Cr were observed, which reflects the intensity of the anthropogenic inputs related to industrial discharge into this system. The results of pollution load index reveal that the sediment was heavily polluted in northern arm and moderately polluted in the extreme end and port region of the southern arm of the lake. A comparison with sediment quality guideline quotient was also made, indicating that there may be some ecotoxicological risk to benthic organisms in these sediments.     

Siting analyses for water quality sampling in a catchment

Pollution loads discharged from upstream development or human activities significantly degrade the water quality of a reservoir. The design of an appropriate water quality sampling network is therefore important for detecting potential pollution events and monitoring pollution trends. However, under a limited budgetary constraint, how to site an appropriate number of sampling stations is a challenging task. A previous study proposed a method applying the simulated annealing algorithm to design the sampling network based on three cost factors including the number of reaches, bank length, and subcatchment area. However, these factors are not directly related to the distribution of possible pollution. Thus, this study modified the method by considering three additional factors, i.e. total phosphorus, nitrogen, and sediment loads. The larger the possible load, the higher the probability of a pollution event may occur. The study area was the Derchi reservoir catchment in Taiwan. Pollution loads were derived from the AGNPS model with rainfall intensity estimated using the Thiessen method. Analyses for a network with various numbers of sampling sites were implemented. The results obtained based on varied cost factors were compared and discussed. With the three additional factors, the chosen sampling network is expected to properly detect pollution events and monitor pollution distribution and temporal trends.     

Assessing heavy metal pollution in the recent bottom sediments of Mabahiss Bay, North Hurghada, Red Sea, Egypt

Thirty-nine samples of recent bottom sediments were collected from Mabahiss Bay, north of Hurghada City, Red Sea, Egypt. The collected samples were subjected to a total digestion technique and analyzed by absorption spectrometer for metals including Pb, Zn, Cd, Ni, Co, Cu, and Mn. Concentration data were processed using correlation analysis, principal component analysis, and hierarchical cluster analysis. Multivariate statistical analysis classified heavy metals in the study area into different groups. The pollution level attributed to these metals was evaluated using geoaccumulation index and contamination factor in order to determine anthropogenically derived sediment contamination. The results of both geoaccumulation index and contamination factor results reveal that the study area is not contaminated with respect to Zn, Ni, Cu, and Mn; uncontaminated to moderately contaminate with Pb; and moderately to strongly contaminate with Cd. The high contents of Pb, Cd, and Co in the study area result from various anthropogenic activities including dredging, land filling, localized oil pollution, using of antifouling and anticorrosive paints from fishing and tourist boats, and sewage discharging from various sources within the study area.     

沉积物重金属污染评价——以巢湖龟山区为例

文章系统介绍了水环境沉积物重金属污染评价方法,比较了不同评价方法的优缺点。采用地累积指数法和潜在生态风险法对巢湖龟山区沉积物中Pb、Cu、Zn、Cr等4种重金属污染进行了评价。结果表明,巢湖龟山区沉积物中金属Cr有中度生态风险,Cu有轻度污染,Pb和Zn没有污染。结果也说明,对沉积物中重金属污染的评价需要用多种方法进行比较评价。     

Integrated pollution evaluation of the Tagus River in Central Spain

The aim of this study was to integrate hydrochemical and sediment data in order to obtain a picture of the pollution state of the Tagus River along central Spain. This area is of special interest because tributaries from the Madrid region are discharged and no previous data were available. Waters and sediments were sampled between 2002 and 2004 from selected sites before and after Jarama River confluence (Madrid city input). The samples were analysed for more than 50 parameters, including those of physico-chemical nature and those reporting the pollution caused by both metals and organic compounds. The quality of waters for different uses has been tested and statistical quality indexes of both global and partial type has also been established. Sediments pollution state was evaluated by comparison with general quality standards. A high degree of pollution and general degradation was observed in the Tagus River downstream the Jarama River input. The pollution of waters is mainly related to parameters indicators of organic pollution from urban sewage. In sediments, a dramatic increase in the concentration of trace metals was found in different points, exceeding toxicological threshold. Further studies would be necessary for organic pollutants and also to evaluate the remobilization potential.     

Assessment of Cu, Pb, and Zn contamination in sediment of north western Peninsular Malaysia by using sediment quality values and different geochemical indices

Surface sediments were collected from the north western aquatic area (13 intertidal sites and 5 river drainages) of Peninsular Malaysia, which were suspected to have received different anthropogenic sources. These sites included town areas, ports, fishing village, industrial areas, highway sides, jetties and some relatively unpolluted sites. The present study revealed that 4.79-32.91 μg/g dry weight for Cu, 15.85-61.56 μg/g dry weight for Pb, and 33.6-317.4 μg/g dry weight for Zn based on 13 intertidal surface sediments while those based on 5 river drainage surface sediments were 10.24-119.6 μg/g dry weight for Cu, 26.7-125.7 μg/g dry weight for Pb and 88.7-484.1 μg/g dry weight for Zn. In general, the metal levels in the drainage sediments are higher than in the intertidal sediments, suggesting dilution factor in the intertidal sediment and direct effluent from point sources in the drainage sediment. In particular, the total concentrations of Cu, Pb, and Zn for the sampling site at Kuala Kurau Town exceeded the Effect Range Median values for Cu, Pb, and Zn for assessments of sediment quality values for freshwater sediment as proposed by MacDonald et al. (Arch Environ Contam Toxicol 39:20-31, 2000), thus adverse biological effects would be observed above this level. Assessment using enrichment factor (using Fe as a normalizer) and geoaccumulation index showed that the three metals at Kuala Kurau Town and Juru Industry drainage were evidenced as having more enrichment and mostly due to non-natural sources. However, caution should be exercised that the interpretation can only become valid when the ratios, indices, and sediment quality values are combined. This is due to the fact that not all the established indices are applicable and, to a certain extent, some of them should be further revised and improved to suit a different metal for Malaysian sediment. Undoubtedly, sites near drainages at Kuala Kurau Town and Juru River Basin need greater attention to mitigate the heavy metal pollution in the future.     

Distribution and temporal variation of trace metal enrichment in surface sediments of San Jorge Bay, Chile

Cu, Pb, and Hg concentrations were determined in surface sediment samples collected at three sites in San Jorge Bay, northern Chile. This study aims to evaluate differences in their spatial distribution and temporal variability. The highest metal concentrations were found at the site “Puerto”, where minerals (Cu and Pb) have been loaded for more than 60 years. On the other hand, Hg does not pose a contamination problem in this bay. Cu and Pb concentrations showed significant variations from 1 year to another. These variations seem to be a consequence of the combination of several factors, including changes in the loading and/or storage of minerals in San Jorge Bay, the dredging of bottom sediments (especially at Puerto), and seasonal changes in physical–chemical properties of the water column that modify the exchange of metals at the sediment–water interface. Differences in the contamination factor and geoaccumulation index suggest that pre-industrial concentrations measured in marine sediments of this geographical zone, were better than geological values (average shale, continental crust average) for evaluating the degree of contamination in this coastal system. Based on these last two indexes, San Jorge Bay has a serious problem of Cu and Pb pollution at the three sampling locations. However, only Cu exceeds the national maximum values used to evaluate ecological risk and the health of marine environments. It is suggested that Chilean environmental legislation for marine sediment quality—presently under technical discussion—is not an efficient tool for protecting the marine ecosystem.