Bicyclist injury severity in traffic crashes: A spatial approach for geo-referenced crash data to uncover non-stationary correlates

Introduction: Bicyclists are among vulnerable road users with their safety a key concern. This study generates new knowledge about their safety by applying a spatial modeling approach to uncover non-stationary correlates of bicyclist injury severity in traffic crashes. Method: The approach is Geographically Weighted Ordinal Logistic Regression (GWOLR), extended from the regular Ordered Logistic Regression (OLR) by incorporating the spatial perspective of traffic crashes. The GWOLR modeling approach allows the relationships between injury severity and its contributing factors to vary across the spatial domain, to account for the spatial heterogeneity. This approach makes use of geo-referenced data. This study explored more than 7,000 geo-referenced bicycle--motor-vehicle crashes in North Carolina. Results: This study performed a series of non-stationarity tests to identify local relationships that vary substantially across the spatial domain. These local relationships are related to the bicyclist (bicyclist age, bicyclist behavior, bicyclist intoxication, bicycle direction, bicycle position), motorist (driver age, driver intoxication, driver behavior, vehicle speed, vehicle type) and traffic (traffic volume). Conclusions: Results from the regular OLR are in general consistent with previous findings. For example, an increased bicyclist injury severity is associated with older bicyclists, bicyclist being intoxicated, and higher motor-vehicle speeds. Results from the GWOLR show local (rather than global) relationships between contributing factors and bicyclist injury severity. Practical Applications: Researchers and practitioners may use GWOLR to prioritize cycling safety countermeasures for specific regions. For example, GWOLR modeling estimates in the study highlighted the west part (from Charlotte to Asheville) of North Carolina for increased bicyclist injury severity due to the intoxication of road users including both bicyclists and drivers. Therefore, if a countermeasure is concerned with the road user intoxication, there may be a priority for the region from Charlotte to Asheville (relative to other areas in North Carolina).     

Using latent class clustering and binary logistic regression to model Australian cyclist injury severity in motor vehicle–bicycle crashes

Introduction: In recent years, Australia is seeing an increase in the total number of cyclists. However, the rise of serious injuries and fatalities to cyclists has been a major concern. Understanding the factors affecting the fatalities and injuries of bicyclists in crashes with motor vehicles is important to develop effective policy measures aimed at improving the safety of bicyclists. This study aims to identify the factors affecting motor vehicle-bicycle (MVB) crashes in Victoria, Australia and introducing effective countermeasures for the identified risk factors. Method: A data set of 14,759 MVB crash records from Victoria, Australia between 2006 and 2019 was analyzed using the binary logit model and latent class clustering. Results: It was observed that the factors that increase the risk of fatalities and serious injuries of bicyclists (FSI) in all clusters are: elderly bicyclist, not using a helmet, and darkness condition. Likewise, in areas with no traffic control, clear weather, and dry surface condition (cluster 1), high speed limits increase the risk of FSI, but the occurrence of MVB crashes in cross intersection and T-intersection has been significantly associated with a reduction in the risk of FSI. In areas with traffic control and unfavorable weather conditions (cluster 2), wet road surface increases the risk of FSI, but the areas with give way sign and pedestrian crossing signs reduce the risk of FSI. Practical Applications: Recommendations to reduce the risk of fatalities or serious injury to bicyclists are: improvement of road lighting and more exposure of bicyclists using reflective clothing and reflectors, separation of the bicycle and vehicle path in mid blocks especially in high-speed areas, using a more stable bicycle for the older people, monitoring helmet use, improving autonomous emergency braking, and using bicyclist detection technology for vehicles.     

Exploring bicyclist injury severity in bicycle-vehicle crashes using latent class clustering analysis and partial proportional odds models

Introduction: Bicyclists are more vulnerable compared to other road users. Therefore, it is critical to investigate the contributing factors to bicyclist injury severity to help provide better biking environment and improve biking safety. According to the data provided by National Highway Traffic Safety Administration (NHTSA), a total of 8,028 bicyclists were killed in bicycle-vehicle crashes from 2007 to 2017. The number of fatal bicyclists had increased rapidly by approximately 11.70% during the past 10 years (NHTSA, 2019). Methods: This paper conducts a latent class clustering analysis based on the police reported bicycle-vehicle crash data collected from 2007 to 2014 in North Carolina to identify the heterogeneity inherent in the crash data. First, the most appropriate number of clusters is determined in which each cluster has been characterized by the distribution of the featured variables. Then, partial proportional odds models are developed for each cluster to further analyze the impacts on bicyclist injury severity for specific crash patterns. Results: Marginal effects are calculated and used to evaluate and interpret the effect of each significant explanatory variable. The model results reveal that variables could have different influence on the bicyclist injury severity between clusters, and that some variables only have significant impacts on particular clusters. Conclusions: The results clearly indicate that it is essential to conduct latent class clustering analysis to investigate the impact of explanatory variables on bicyclist injury severity considering unobserved or latent features. In addition, the latent class clustering is found to be able to provide more accurate and insightful information on the bicyclist injury severity analysis. Practical Applications: In order to improve biking safety, regulations need to be established to prevent drinking and lights need to be provided since alcohol and lighting condition are significant factors in severe injuries according to the modeling results.     

Exploring the severity of bicycle–vehicle crashes using latent class clustering approach in India

IntroductionBicyclists are vulnerable users in the shared asset like roadways. However, people still prefer to use bicycles for environmental, societal, and health benefits. In India, the bicycle plays a role in supporting the mobility to more people at lower cost and are often associated with the urban poor. Bicyclists represents one of the road user categories with highest risk of injuries and fatalities. According to the report by the Ministry of Road Transport and Highways (Accidents, 2017) in India, there is a sharp increase in the number of fatal victims for bicyclists in 2017 over 2016. The number of cyclists killed jumped from 2,585 in 2016 to 3,559 in 2017, a 37.7% increase. Method: Few studies have only investigated the crash risk perceived by the bicyclists while interacting with other road users. The present paper investigates the injury severity of bicyclists in bicycle-vehicle crashes that occurred in the state of Tamilnadu, India during the nine year period (2009–2017). The analyses demonstrate that dividing bicycle-vehicle collision data into five clusters helps in reducing the systematic heterogeneity present in the data and identify the hidden relationship between the injury severity levels of bicyclists and cyclists demographics, vehicle, environmental, temporal cause for the crashes. Results: Latent Class Clustering (LCC) approach was used in the present study as a preliminary tool for the segmentation of 9,978 crashes. Later, logistic regression analysis was used to identify the factors that influence bicycle crash severity for the whole dataset as well as for the clusters that were obtained from the LCC model. Results of this study show that combined use of both techniques reveals further information that wouldn’t be obtained without prior segmentation of the data. Few variables such as season, weather conditions, and light conditions were significant for certain clusters that were hidden in the whole dataset. This study can help domain experts or traffic safety researchers to segment traffic crashes and develop targeted countermeasures to mitigate injury severity.     

Crash histories,safety perceptions,and attitudes among Virginia bicyclists

IntroductionCycling injury and fatality rates are on the rise, yet there exists no comprehensive database for bicycle crash injury data.MethodWidely used for safety analysis, police crash report datasets are automobile-oriented and widely known to under-report bicycle crashes. This research is one attempt to address gaps in bicycle data in sources like police crash reports. A survey was developed and deployed to enhance the quality and quantity of available bicycle safety data in Virginia. The survey captures bicyclist attitudes and perceptions of safety as well as bicycle crash histories of respondents.ResultsThe results of this survey most notably show very high levels of under-reporting of bicycle crashes, with only 12% of the crashes recorded in this survey reported to police. Additionally, the results of this work show that lack of knowledge concerning bicycle laws is associated with lower levels of cycling confidence. Count model results predict that bicyclists who stop completely at traffic signals are 40% less likely to be involved in crashes compared to counterparts who sometimes stop at signals. In this dataset, suburban and urban roads with designated bike lanes had more favorable injury severity profiles, with lower percentages of severe and minor injury crashes compared to similar roads with a shared bike/automobile lane or no designated bike infrastructure.     

Analysis of the severity of vehicle-bicycle crashes with data mining techniques

Introduction: Although cycling is increasingly being promoted for transportation, the safety concern of bicyclists is one of the major impediments to their adoption. A thorough investigation on the contributing factors to fatalities and injuries involving bicyclist. Method: This paper designs an integrated data mining framework to determine the significant factors that contribute to the severity of vehicle-bicycle crashes based on the crash dataset of Victorian, Australia (2013–2018). The framework integrates imbalanced data resampling, learning-based feature extraction with gradient boosting algorithm and marginal effect analysis. The top 10 significant predictors of the severity of vehicle-bicycle crashes are extracted, which gives an area under ROC curve (AUC) value of 0.8236 and computing time as 37.8 s. Results: The findings provide insights for understanding and developing countermeasures or policy initiatives to reduce severe vehicle-bicycle crashes.     

Highway safety assessment and improvement through crash prediction by injury severity and vehicle damage using Multivariate Poisson-Lognormal model and Joint Negative Binomial-Generalized Ordered Probit Fractional Split model

Introduction: Predicting crash counts by severity plays a dominant role in identifying roadway sites that experience overrepresented crashes, or an increase in the potential for crashes with higher severity levels. Valid and reliable methodologies for predicting highway accidents by severity are necessary in assessing contributing factors to severe highway crashes, and assisting the practitioners in allocating safety improvement resources. Methods: This paper uses urban and suburban intersection data in Connecticut, along with two sophisticated modeling approaches, i.e. a Multivariate Poisson-Lognormal (MVPLN) model and a Joint Negative Binomial-Generalized Ordered Probit Fractional Split (NB-GOPFS) model to assess the methodological rationality and accuracy by accommodating for the unobserved factors in predicting crash counts by severity level. Furthermore, crash prediction models based on vehicle damage level are estimated using the same two methodologies to supplement the injury severity in estimating crashes by severity when the sample mean of severe injury crashes (e.g., fatal crashes) is very low. Results: The model estimation results highlight the presence of correlations of crash counts among severity levels, as well as the crash counts in total and crash proportions by different severity levels. A comparison of results indicates that injury severity and vehicle damage are highly consistent. Conclusions: Crash severity counts are significantly correlated and should be accommodated in crash prediction models. Practical application: The findings of this research could help select sound and reliable methodologies for predicting highway accidents by injury severity. When crash data samples have challenges associated with the low observed sampling rates for severe injury crashes, this research also confirmed that vehicle damage can be appropriate as an alternative to injury severity in crash prediction by severity.     

The unintended impact of helmet use on bicyclists’ risk-taking behaviors

Introduction: Safety is a critical factor in promoting sustainable urban non-motorized travel modes like bicycles. Helmets have shown to be effective in reducing injury severity in bicycle crashes, however, their effects on bicyclists’ behaviors still requires deeper understanding, especially amid the emerging trend of using shared bicycles. Risk compensation effects suggest that bicyclists may offset perceived gains in safety from wearing a helmet by increasing risk-taking behaviors. A better understanding of these compensation effects can be useful in assessing various bicycle safety related programs. Method: Using a sample of 131 bicyclists from the San Francisco Bay area, this research studies how bicyclists respond with respect to risk-taking behaviors under various urban-street conditions, as a function of helmet use. Study participants were each shown 12 videos, shot in Berkeley, California, from the perspective of a bicyclist riding behind another bicyclist. A fractional factorial experiment design was used to systematically vary contextual attributes (e.g., speed, bike lane facilities, on-street parking, passing vehicles) across the videos. After each video, participants were asked to indicate if they would overtake the bicyclist in the video. With the help of data adaptive estimation techniques, targeted maximum likelihood estimation (TMLE) was applied to estimate the average risk difference between helmeted users and non-users, controlling for self-selection effects. Individual-based nonparametric bootstrap was performed to assess the uncertainty associated with the estimator. Results: Our findings suggest, on average, individuals more likely to wear a helmet are 15.6% more likely to undertake a risky overtaking maneuver. Practical Applications: This study doesn’t try to oppose mandatory helmet laws, but rather serves as a cautionary warning that road safety programs may need to consider strategies in which unintended impact of bicycle helmet use can be mitigated. Moreover, our findings also provide additional evaluation component when it comes to the cost-benefit assessment of helmet-related laws.     

Motorcyclist injury severity in angle crashes at T-junctions: Identifying significant factors and analysing what made motorists fail to yield to motorcycles

Evidence in literature suggested that motorists’ failure to give way to motorcycles at junctions is the main contributory factor to motorcycle–car accidents that involve gap acceptance (i.e., approach-turn and angle crashes). This paper attempts to examine how motorist’s failure to give way affects motorcyclist injury severity in angle crashes at T-junctions, while controlling for other factors (demographic, vehicle, crash, and environmental factors). Binary logistic models of motorcyclist injury severity were estimated using the data extracted from the Stats19 accident injury database (1991–2004). Angle collisions were classified into several sub-crashes based on the manoeuvres motorcycles and cars were making prior to the accidents. The modelling results showed that injuries were greatest when a travelling-straight motorcycle on the main road crashed into a right-turn car from the minor road, particularly at stop-/yield-controlled junctions. Such crash pattern was assumed to be an accident involving right-of-way violation. Using binary logistic models, factors determining the likelihood of motorist’s failure to yield to motorcycles were also examined. The implications of the research findings of this present study were provided.     

Ordered logistic models of influencing factors on crash injury severity of single and multiple-vehicle downgrade crashes: A case study in Wyoming

Introduction: The state of Wyoming, like other western United States, is characterized by mountainous terrain. Such terrain is well noted for its severe downgrades and difficult geometry. Given the specific challenges of driving in such difficult terrain, crashes with severe injuries are bound to occur. The literature is replete with research about factors that influence crash injury severity under different conditions. Differences in geometric characteristics of downgrades and mechanics of vehicle operations on such sections mean different factors may be at play in impacting crash severity in contrast to straight, level roadway sections. However, the impact of downgrades on injury severity has not been fully explored in the literature. This study is thus an attempt to fill this research gap. In this paper, an investigation was carried out to determine the influencing factors of crash injury severities of downgrade crashes. Method: Due to the ordered nature of the response variable, the ordered logit model was chosen to investigate the influencing factors of crash injury severities of downgrade crashes. The model was calibrated separately for single and multiple-vehicle crashes to ensure the different factors influencing both types of crashes were captured. Results: The parameter estimates were as expected and mostly had signs consistent with engineering intuition. The results of the ordered model for single-vehicle crashes indicated that alcohol, gender, road condition, vehicle type, point of impact, vehicle maneuver, safety equipment use, driver action, and annual average daily traffic (AADT) per lane all impacted the injury severity of downgrade crashes. Safety equipment use, lighting conditions, posted speed limit, and lane width were also found to be significant factors influencing multiple-vehicle downgrade crashes. Injury severity probability plots were included as part of the study to provide a pictorial representation of how some of the variables change in response to each level of crash injury severity. Conclusion: Overall, this study provides insights into contributory factors of downgrade crashes. The literature review indicated that there are substantial differences between single- and multiple vehicle crashes. This was confirmed by the analysis which showed that mostly, separate factors impacted the crash injury severity of the two crash types. Practical applications: The results of this study could be used by policy makers, in other locations, to reduce downgrade crashes in mountainous areas.     

An in-depth analysis of self-reported cycling injuries in single and multiparty bicycle crashes in Denmark

Introduction: Cycling is one of the main forms of transportation in Denmark. However, while the number of traffic crash fatalities in the country has decreased over the past decade, the frequency of cyclists killed or seriously injured has increased. The high rate of serious injuries and fatalities associated with cycling emphasizes the increasing need for mitigating the severity of such crashes. Method: This study conducted an in-depth analysis of cyclist injury severity resulting from single and multiparty bicycle-involved crashes. Detailed information was collected using self-reporting data undertaken in Denmark for a 12-month period between 1 November 2012 and 31 October 2013. Separate multilevel logistic (MLL) regression models were applied to estimate cyclist injury severity for single and multiparty crashes. The goodness-of-fit measures favored the MLL models over the standard logistic models, capturing the intercorrelation among bicycle crashes that occurred in the same geographical area. Results: The results also showed that single bicycle-involved crashes resulted in more serious outcomes when compared to multiparty crashes. For both single and multiparty bicycle crash categories, non-urban areas were associated with more serious injury outcomes. For the single crashes, wet surface condition, autumn and summer seasons, evening and night periods, non-adverse weather conditions, cyclists aged between 45 and 64 years, male sex, riding for the purpose of work or educational activities, and bicycles with light turned-off were associated with severe injuries. For the multiparty crashes, intersections, bicycle paths, non-winter season, not being employed or retired, lower personal car ownership, and race bicycles were directly related to severe injury consequences. Practical Applications: The findings of this study demonstrated that the best way to promote cycling safety is the combination of improving the design and maintenance of cycling facilities, encouraging safe cycling behavior, and intensifying enforcement efforts.     

Why are powered two wheeler riders still fatally injured in road junction crashes? – A causation analysis

Introduction: Powered Two Wheeler (PTW) crashes continue to be a road safety concern with a plateauing of the number of associated fatalities. Method: Forty one UK fatal or serious injury crashes involving a PTW and another vehicle at a junction were examined. Crash causation was analysed using the Driver Reliability and Error Analysis Method (DREAMv3.2). Crashes were split into two groups: Group A, where the other vehicle was travelling in the opposite direction to the PTW and commenced a right turn across the PTW’s path; and Group B where the other vehicle turned right out of a side road (or entrance) across the PTW’s path. Results: Overall, the factor that led directly to the crash (phenotype) was most commonly ‘too high speed’ or ‘too late action’ for the motorcyclist and ‘too early action’ for the other driver. Missed or late observations were contributory factors for both PTW riders and other vehicle drivers. Some differences between groups were observed with the PTW riders in Group B more likely to have ‘insufficient skills’ and the other vehicle drivers in Group A more likely to have ‘attention allocation’ as a causation factor. For both groups the crashes occurred because the other vehicle failed to give way to the PTW with causation chains that suggest ‘looked but failed to see’ is still an issue in this type of crash. The excessive speed of the PTW contributed to some crashes. Conclusions: This analysis suggests that drivers failing to give way to PTW riders at junctions is still a problem. This may relate to the ‘looked but did not see’ phenomenon. Causation differences were observed between the examined groups. Practical considerations: The DREAM methodology is an effective tool in analysing crash data from police collision investigation reports. Different countermeasures may be necessary to prevent different types of junction crashes.     

Traffic safety culture and prosocial driver behavior for safer vehicle-bicyclist interactions

Introduction: Bicyclist safety is a growing concern as more adults use this form of transportation for recreation, exercise, and mobility. Most bicyclist fatalities result from a crash with a vehicle. Often, the behaviors of the driver are responsible for the crash. Method: This survey study of Montana and North Dakota residents (n = 938) examined the influence of traffic safety culture on driver behaviors that affect safe interactions with bicyclists. Results: Prosocial driver behavior was most common and appeared to be intentional. Intention was increased by positive attitudes, normative perceptions, and perceived control. However, normative perceptions appear to offer the most opportunity for change. Practical Application: Strategies that increase perceptions that prosocial driver behavior is normal may increase prosocial intentions, thereby increasing bicyclist safety.     

In-depth approach for identifying crash causation patterns and its implications for pedestrian crash prevention

IntroductionA pedestrian crash occurs due to a series of contributing factors taking effect in an antecedent-consequent order. One specific type of antecedent-consequent order is called a crash causation pattern. Understanding crash causation patterns is important for clarifying the complicated growth of a pedestrian crash, which ultimately helps recommend corresponding countermeasures. However, previous studies lack an in-depth investigation of pedestrian crash cases, and are insufficient to propose a representative picture of causation patterns. Method: In this study, pedestrian crash causation patterns were discerned by using the Driving Reliability and Error Analysis Method (DREAM). One hundred and forty-two pedestrian crashes were investigated, and five pedestrian pre-crash scenarios were extracted. Then, the crash causation patterns in each pre-crash scenario were analyzed; and finally, six distinct patterns were identified. Accordingly, 17 typical situations corresponding to these causation patterns were specified as well. Results: Among these patterns, the pattern related to distracted driving and the pattern related to an unexpected change of pedestrian trajectory contributed to a large portion of the total crashes (i.e., 27% and 24%, respectively). Other patterns also played an important role in inducing a pedestrian crash; these patterns include the pattern related to an obstructed line of sight caused by outside objects (9%), the pattern that involves reduced visibility (13%), and the pattern related to an improper estimation of the gap distance between the vehicle and the pedestrian (10%). The results further demonstrated the inter-heterogeneity of a crash causation pattern, as well as the intra-heterogeneity of pattern features between different pedestrian pre-crash scenarios. Conclusions and practical applications: Essentially, a crash causation pattern might involve different contributing factors by nature or dependent on specific scenarios. Finally, this study proposed suggestions for roadway facility design, roadway safety education and pedestrian crash prevention system development.     

Examining crash injury severity and barrier-hit outcomes from cable barriers and strong-post guardrails on Alabama’s interstate highways

Introduction: This study investigates the impact of several risk factors (i.e., roadway, driver, vehicle, environmental, and barrier-specific characteristics) on the injury severity resulting from barrier-related crashes and also on barrier-hit outcomes (i.e., vehicle containment, vehicle redirection, and barrier penetration). A total of 1,685 barrier-related crashes, which occurred on three major interstate highways (I-65, I-85, and I-20) in the state of Alabama, were collected for a seven-year period (2010–2016), and all relevant information from the police reports was reviewed. Features that were rarely explored before (e.g., median width, barrier length, barrier offset or lateral position, left shoulder width, blockout type, and number of cables) were also collected and examined. Two types of longitudinal barriers were analyzed: high-tension cable barriers installed on medians and strong-post guardrails installed on medians and/or roadsides. Method: Two separate mixed logit (MXL) models were used to analyze crash injury severity in median and roadside barrier-related crashes. Two additional MXL models were separately adopted for median and roadside barrier-related crashes to estimate the probability of three barrier-hit outcomes (vehicle containment, vehicle redirection, and barrier penetration). Results: The results of crash injury severity MXL models showed that, for both median and roadside barrier crashes, barrier penetration, female drivers, and driver fatigue were associated with a higher probability of injury or fatal crashes. The results of barrier-hit MXL models showed that longer barrier length, Brifen cable barrier system, and barrier lateral position were significant predictors of median barrier-hit outcomes, whereas dark lighting condition, driving under the influence (DUI), presence of curved freeway sections, and right shoulder width significantly contributed to roadside barrier-hit outcomes. Conclusions: The MXL model succeeded in identifying several contributing factors of crash severity and barrier-hit outcomes along Alabama’s interstate highways. Practical applications: One study application is to design longer barrier run length (greater than 1230 feet or 0.2 miles) to reduce the barrier penetration likelihood.     

A multinomial logit model of motorcycle crash severity at Australian intersections

Introduction: Motorcyclists are exposed to more fatalities and severe injuries per mile of travel as compared to other vehicle drivers. Moreover, crashes that take place at intersections are more likely to result in serious or fatal injuries as compared to those that occur at non-intersections. Therefore, the purpose of this study is to evaluate the contributing factors to motorcycle crash severity at intersections. Method: A data set of 7,714 motorcycle crashes at intersections in the State of Victoria, Australia was analyzed over the period of 2006–2018. The multinomial logit model was used for evaluating the motorcycle crashes. The severity of motorcycle crashes was divided into three categories: minor injury, serious injury and fatal injury. The risk factors consisted of four major categories: motorcyclist characteristics, environmental characteristics, intersection characteristics and crash characteristics. Results: The results of the model demonstrated that certain factors increased the probability of fatal injuries. These factors were: motorcyclists aged over 59 years, weekend crashes, midnight/early morning crashes, morning rush hours crashes, multiple vehicles involved in the crash, t-intersections, crashes in towns, crashes in rural areas, stop or give-way intersections, roundabouts, and uncontrolled intersections. By contrast, factors such as female motorcyclists, snowy or stormy or foggy weather, rainy weather, evening rush hours crashes, and unpaved roads reduced the probability of fatal injuries. Practical Applications: The results from our study demonstrated that certain treatment measures for t-intersections may reduce the probability of fatal injuries. An effective way for improving the safety of stop or give-way intersections and uncontrolled intersections could be to convert them to all-way stop controls. Further, it is recommended to educate the older riders that with ageing, there are physiological changes that occur within the body which can increase both crash likelihood and injury severity.     

Correlation between crash avoidance maneuvers and injury severity sustained by motorcyclists in single-vehicle crashes

Objectives: In order to improve motorcycle safety, this article examines the correlation between crash avoidance maneuvers and injury severity sustained by motorcyclists, under multiple precrash conditions. Method: Ten-year crash data for single-vehicle motorcycle crashes from the General Estimates Systems (GES) were analyzed, using partial proportional odds models (i.e., generalized ordered logit models). Results: The modeling results show that “braking (no lock-up)” is associated with a higher probability of increased severity, whereas “braking (lock-up)” is associated with a higher probability of decreased severity, under all precrash conditions. “Steering” is associated with a higher probability of reduced injury severity when other vehicles are encroaching, whereas it is correlated with high injury severity under other conditions. “Braking and steering” is significantly associated with a higher probability of low severity under “animal encounter and object presence,” whereas it is surprisingly correlated with high injury severity when motorcycles are traveling off the edge of the road. The results also show that a large number of motorcyclists did not perform any crash avoidance maneuvers or conducted crash avoidance maneuvers that are significantly associated with high injury severity. Conclusions: In general, this study suggests that precrash maneuvers are an important factor associated with motorcyclists' injury severity. To improve motorcycle safety, training/educational programs should be considered to improve safety awareness and adjust driving habits of motorcyclists. Antilock brakes and such systems are also promising, because they could effectively prevent brake lock-up and assist motorcyclists in maneuvering during critical conditions. This study also provides valuable information for the design of motorcycle training curriculum.     

Injury severity analysis of rollover crashes for passenger cars and light trucks considering temporal stability: A random parameters logit approach with heterogeneity in mean and variance

Problem: The rollover crash is a serious crash type that often causes higher injury severities. Moreover, factors that contribute to the injury severities of rollover crashes may show instabilities in different vehicle types and time periods, which requires further investigations. This study utilizes the rollover crash data in North Carolina from Highway Safety Information System (HSIS) to study the effect instabilities of factors in vehicle type and time periods in rollover crashes. Methods: The injury severities of drivers are estimated using the random parameters logit (RPL) model with heterogeneity in means and variances. Available factors in HSIS have been categorized into three groups, which are drivers, road, and environment, respectively. This study also justifies the segmentations through transferability tests. The effects of identified significant factors are evaluated using marginal effects. Results: Factors such as FWP (farm, wood, and pasture areas), unhealthy physical condition, impaired physical condition, road adverse, and so forth have shown instabilities in marginal effects among vehicle types and time periods. Practical Applications: The finding of this research could provide important references for policy makers and automobile manufactures to help mitigate the injury severity of rollover crashes.