污泥处置方式在三峡库区的适应性分析

简述了三峡库区污泥的处置现状及存在的问题.结合当前国内外污泥的处置技术及发展趋势,以及污泥处置的技术经济可行性,针对三峡库区的实际情况,提出三峡库区污泥的处置方向是:目前以生活垃圾填埋场填埋为主,以土地利用为发展方向.     

污泥调理剂的研究进展

介绍了复合型污泥脱水调理剂的研发进展,着重讨论了不同类型污泥调理剂的复配使用方法,指出使用复合型调理剂或复配调理剂可提高污泥脱水性能,并探讨了污泥处理与处置一体化的可能性.     

城市污泥太阳能光热干化技术研究进展

污泥干化是城市污泥无害化处置和资源化利用的前提和关键工序,需要消耗大量能源。将太阳能应用于城市污泥干化,可大幅度减少污泥干化过程对常规能源的依赖,经济高效地实现污泥的稳定化、减量化及资源化。对国内外城市污泥的处理处置和太阳能污泥干化技术的研究现状进行综述。     

高分子絮凝剂对污泥脱水性能的影响

使用活性污泥法处理废水会产生大量剩余污泥,给污泥的处理和处置带来很大麻烦.许多方法可用于减少剩余污泥量,如消化和脱水.化学药剂可用于提高污泥的脱水性能.介绍了污泥脱水性能的表达方式及聚电解质提高污泥脱水性能的原理,讨论了聚电解质提高污泥脱水性能的相关影响因素.     

垃圾焚烧发电厂渗滤液处理站污泥危险特性研究

通过对一例垃圾焚烧发电厂渗滤液处理站污泥进行鉴定,表明该部分污泥不属于危险固废,可以纳入焚烧炉与生活垃圾一起处理。鉴别结果为促进固体废物循环利用及同类企业合理处置渗滤液处理站污泥提供了借鉴。     

电镀污泥处理现状及进展

电镀污泥性质复杂、危害性大,然而其中蕴藏的重金属资源丰富。在天然矿产资源日益枯竭和环境保护深入人心的背景下,科学处理电镀污泥成为研究热点。从电镀污泥的危害性和资源性出发,对国内外电镀污泥无害处置和重金属回收现状进行综述,讨论了电镀污泥处理的方向。     

污泥深度脱水干化/焚烧技术分析及其经济性评估

全面分析了我国污泥的产生现状,对比分析了目前主要的污泥干化处理处置技术。污泥干化处理技术能够有效对污泥进行深度脱水,并且不改变污泥热值,是一种具有前景的污泥处理工艺。详细介绍了该技术的收集、预处理、深度干化及返混、焚烧发电等步骤,分析了其主要污染物及控制技术。借助示范工程实例中污泥深度脱水干化/焚烧一体化技术工艺的运行状况,对污泥深度脱水干化/焚烧技术进行经济性评估。     

污泥余热干化技术及其经济性分析

我国污水处理厂每年都会产生大量的污泥,其复杂的成分及高含水率制约污泥的有效利用,如何降低污泥的含水率是其资源化利用的关键.首先调研了污泥产生及成分,从污泥干化的典型工艺及设备、干化过程的环境污染与控制、污泥干化过程的尾气处理和污泥干化经济性分析4个方面对污泥干化技术进行阐述,指出污泥余热干化是污泥实现节能、经济及环保的有效处置方式.     

刍议污泥分类处置及其资源化再生利用技术

污泥中含有大量的氮氧化物、重金属和病菌元,直接排放将给环境造成严重的污染。如果对污泥进行有效的处理,可以将污泥转化为有机肥,成为植物的养分。当前由于我国的城镇污水处理厂污泥处理技术不完善,大量污泥没有得到有效的处理,不仅降低了污水处理厂的除污能力,浪费了大量资源,而且对环境造成严重的破坏,提高城市污水处理厂的污泥处理技术至关重要。阐述了污泥类别、国内外污泥处理技术处理现状以及污泥分类处置和资源化再生利用技术。     

污泥减量化技术研究进展

针对当前日益突出的污泥处理处置难等问题,分别从物理法、化学法和生物法等方面阐述了当前污泥减量化技术的研究发展现状,介绍了各种工艺的基本原理、特点和存在的问题.结合国内外污泥减量化技术的研究进展,提出了未来污泥减量化技术的发展方向.     

炼油厂厂界恶臭强度分级评估

石油炼制是产生恶臭污染的重点行业之一,恶臭强度是评估恶臭污染程度的重要参数。以炼油厂厂界大气特征污染物为研究对象,综合考虑检出率、嗅阈值和物质浓度3项指标,采用指标评分法筛选出厂界主要恶臭污染物硫化氢、氨、甲苯和二甲苯。基于韦伯-费希纳定律构建了恶臭强度分级评估方法,以某炼油厂为例进行了厂界恶臭强度评估,结果表明,厂界恶臭强度值为0.63,属于Ⅱ级(轻污染),硫化氢是恶臭强度的主要贡献源。应用感官测定法验证了该评估方法的可靠性。从恶臭管理的角度看,炼油厂在厂界达标排放的基础上应进一步实施恶臭污染综合治理措施,以改善周边的环境质量。     

Characterization and control of odorous gases at a landfill site: a case study in Hangzhou, China

Municipal solid waste (MSW) landfills are one of the major sources of offensive odors potentially creating annoyance in adjacent communities. At the end of May 2007, an odor pollution incident occurred at the Tianziling landfill site, Hangzhou, China, where the residents lodged complaints about the intense odor from the landfill, which drew a significant attention from the government. In this study, ambient air monitoring was conducted at the Tianziling landfill site. The main odor composition of the gas samples collected on June 1st 2007 and the reduction of various odorous gases from the samples collected on June 1st 2009 due to the applied odor control techniques were determined using gas chromatography-mass spectrometry (GC-MS). In addition, variations of primary odorous gaseous (NH₃ and H₂S) concentrations at different locations in the landfill site from July 2007 to June 2009 were also investigated by using classical spectrophotometric methods. Results showed that a total of 68 volatile compounds were identified among which H₂S (56.58-579.84 μg/m³) and NH₃ (520-4460 μg/m³) were the notable odor components contributing to 4.47-10.92% and 83.91-93.94% of total concentrations, respectively. Similar spatial and temporal shifts of H₂S and NH₃ concentrations were observed and were significantly affected by environmental factors including temperature, air pressure and wind direction. Odor pollution was worse when high temperature, high humidity, low air pressure, and southeast, northeast or east wind appeared. Moreover, the environmental sampling points of the dumping area and the leachate treatment plant were found to be the main odor sources at the Tianziling landfill site. The odor control technologies used in this project had a good mitigating effect on the primary odorous compounds. This study provides long-term valuable information concerning the characteristics and control of odors at landfill sites in a long run.     

炼油恶臭污染治理技术在中国石化天津分公司的应用实例

简述了炼油装置区恶臭污染源的主要分布、恶臭气体组成和排放规律，介绍了恶臭治理的基本方法。通过治理实例，重点分析了目前常用的吸收法、燃烧法、生物法和吸附法等恶臭治理技术的优势和相对不足，并对恶臭治理应用技术方案的选择提出建议。     

Food decay and offensive odorants: A comparative analysis among three types of food

In this study, a list of offensive odorants including reduced sulfur, carbonyls, nitrogenous, and volatile organic compounds was measured by the indirect (instrumental) method during the decay processes of three food types (snipe egg, mackerel, and squid). The strengths of the odor release were also quantified in terms of dilution-to-threshold (D/T) ratio based on the air dilution sensory test. To collect odor samples for each food type, decaying experiments were conducted in 100 mL throwaway syringes for 1 month. The results showed that ammonia had the largest mean ranging from 385 ppm (fish) to 554 ppm (egg). However, most odorants generally fell in the range of 0.01–10 ppm, regardless of food type. The odor strengths measured with the suprathreshold method in terms of average D/T values increased on the order of 33,520 (egg), 202,330 (fish), and 766,330 (squid). These results were highly comparable to the patterns of odor indices derived by empirical conversion of odorant concentration data. The overall results of this study thus suggest that a unique pattern of odor release develops among different odorants as well as food type.     

含硫气田恶臭气体阈限值与恶臭强度的关系

介绍了恶臭强度的6级分类法,针对含硫气田典型的5种含硫恶臭化合物,利用韦伯-费希纳公式研究了气体浓度和恶臭强度的关系,计算并分析了我国环境标准和职业卫生标准规定的阈限值对应的恶臭强度。GB/T14554—1993《恶臭污染物排放标准》规定一级厂界浓度标准限值对应的恶臭强度为2.5左右,二级新改扩建厂界标准限值对应恶臭强度为2.8左右。我国国家职业卫生标准GBZ 2.1—2007中规定的含硫恶臭气体职业接触限值对应的恶臭强度均在4以上。     

In-situ emission characteristics of odorous gases from two food waste processing plants

Odorous gas emission is the main environmental concern of food waste treatment. Two typical food waste processing plants, one for animal feed production by hydrothermal hydrolysis + aerobic fermentation (Plant A), and the other for biogas production by anaerobic digestion (Plant B), were selected to conduct in situ monitoring of fugitive odorous gas emission for five consecutive days, and the emission characteristics of NH₃ and total volatile organic compounds (TVOC) were compared in this paper. The results showed that the two processes had different emission characteristics of odorous gases. Closed-operated hydrothermal hydrolysis had positive effects on overall fugitive odor control in plant A. Meanwhile, more fugitive odor gases may be released into the environment during the pretreatment with high-temperature and seemingly-open facilities in plant B. The emission strength of odor gases at night was generally lower than that in the day since more fresh food waste was received in the day and the higher temperature and lower air pressure in the day were favorable to gas emission. In general, the process of hydrothermal hydrolysis + aerobic fermentation was more advantageous in controlling odor than the process of anaerobic digestion.     

Odor Control for Land Application of Lime Stabilized Biosolids

Over three million dry metric tons of biosolids produced in the United States are land applied as Class B. Lime stabilization is employed for biosolids treatment at approximately 20% of the wastewater treatment plants because it is a simple and inexpensive process. During lime stabilization, the pH of sewage sludge is raised above 12 for pathogen inactivation and odor reduction. Lime dose and mixing have been found to greatly reduce odor generation from lime stabilized biosolids. A better quality biosolids product is less likely to create public opposition to land application programs. In this study, land application tests using Class B biosolids were conducted in order to determine whether better mixing can reduce odor generation during the land application of lime stabilized biosolids. The mixing quality of a treatment plant’s lime stabilized biosolids was improved by relocating the lime addition point, which prolonged the mixing time and produced a better mixed biosolids product. Based on field observations of land application, the poorly mixed biosolids were more odorous and offensive prior to incorporation. However, once incorporated into the soil, there was no appreciable odor difference between the biosolids. Another land application study was conducted to assess the odor of unincorporated Class A biosolids and compare it with incorporated Class A biosolids with the soil.     

Removal,Handling, and Thermal Desorption Treatment Techniques for Manufactured Gas Plant Wastes

Due to the nature of contamination typically found at former MGP (manufactured gas plant) sites, excavation and thermal desorption of MGP wastes has proven to be an effective method for the remediation of MGP‐contaminated soil. The use of on‐site thermal desorption enables MGP sites to be quickly remediated at a low cost. Tar pits, holders, and other underground storage structures typically contain coal tar residuals and waste from former operations, and the areas around these structures are often significantly contaminated. Thus, excavation techniques, odor and vapor management, and material preparation for the treatment method are important factors to consider when developing a site remediation strategy. This article reviews typical excavation and handling methods associated with the remediation of former MGP sites and discusses the treatment of MGP wastes using on‐site thermal desorption technology. © 2001 John Wiley & Sons, Inc.     

Estimation of odor emission rate from landfill areas using the sniffing team method

The monitoring of the odor annoyance generated by a landfill area is difficult, since it is a multi-area-sources problem, with a discontinuous odor emission. This paper proposes an adaptation of the method of sniffing team campaigns to the particular case of fresh waste odors. The method is based on the field determination of odor perception points, followed by data processing with a bi-Gaussian-type model, adapted to handle the odors. In a first step, field observers delineate the region in which odor impact is experienced and then the emission rate is manipulated in a dispersion model until the predicted size of the impact zone matches that observed in the field. In a second step the adjusted emission rate is entered into the model to calculate the percentiles corresponding to the average annoyance zone. The originality of the proposed method is the introduction of all observation points and of all recorded meteorological data into the model. The paper discusses the method limitations and the errors induced on the results, i.e. the odor emission rate and the percentile lines (or iso-concentration lines) which are used to describe the odor concentrations on a map of the surroundings of the plant. The proposed method proves to be reliable for diffuse sources, such as landfill areas. The obtained results are coherent with other results found in the literature with other techniques.     

Monitoring of odor compounds produced by solid waste treatment plants with diffusive samplers

Nuisance caused by odors is one of the most important problems for waste management plants. To control an odor nuisance, it must first be quantified. The analytical difficulties in odor measurements are related to the high number of volatile components (belonging to several chemical classes), above all when the concentration is lower than the detection limit of the technique used for the measurement. In this work, 2-butanone, alpha-pinene, tetrachloroethylene, dimethyldisulfide, beta-pinene, limonene, phenol and benzoic acid are determined, because they are representative of some important classes of compounds with higher odor impact. The compounds are sampled with thermal desorbable radial diffusive samplers Radiello containing Tenax cartridges. The analytical repeatability and the complete thermal desorption of the cartridges were verified for each odor compound; the relative standard deviations for repeated samples and the recovery percentage were, respectively, less than 7% and about 97% for all compounds. The measurements of the linearity of sampling showed no systematic difference according to the collection period. The comparison between the odor threshold and the limit of detection demonstrated that this method is reliable for the recognition and quantification of odor compounds, allowing Public Administration to impose legal limits and the control agencies to verify them.