Algal growth inhibition: effect of the choice of growth rate or biomass as endpoint on the classification and labelling of new substances notified in the EU

From the complete base set notifications of new substances currently available, we have investigated what effects the choice of using growth rate or biomass in the algal growth inhibition test has on the relative sensitivity of the three aquatic toxicity tests. Both parameters derived from the algal test were more sensitive than either fish or Daphnia tests. Changes in the classification of substances after the removal of either algae, Daphnia or fish data from the base set, when applying current legal practice, occur in 22.9%, 6.6% and 4.8% of the notifications, respectively. When always using growth rate as a parameter, these numbers change to 15.4%, 9.2% and 7.2%, respectively.     

ECOSAR model performance with a large test set of industrial chemicals

The widely used ECOSAR computer programme for QSAR prediction of chemical toxicity towards aquatic organisms was evaluated by using large data sets of industrial chemicals with varying molecular structures. Experimentally derived toxicity data covering acute effects on fish, Daphnia and green algae growth inhibition of in total more than 1,000 randomly selected substances were compared to the prediction results of the ECOSAR programme in order (1) to assess the capability of ECOSAR to correctly classify the chemicals into defined classes of aquatic toxicity according to rules of EU regulation and (2) to determine the number of correct predictions within tolerance factors from 2 to 1,000. Regarding ecotoxicity classification, 65% (fish), 52% (Daphnia) and 49% (algae) of the substances were correctly predicted into the classes "not harmful", "harmful", "toxic" and "very toxic". At all trophic levels about 20% of the chemicals were underestimated in their toxicity. The class of "not harmful" substances (experimental LC/EC(50)>100 mg l(-1)) represents nearly half of the whole data set. The percentages for correct predictions of toxic effects on fish, Daphnia and algae growth inhibition were 69%, 64% and 60%, respectively, when a tolerance factor of 10 was allowed. Focussing on those experimental results which were verified by analytically measured concentrations, the predictability for Daphnia and algae toxicity was improved by approximately three percentage points, whereas for fish no improvement was determined. The calculated correlation coefficients demonstrated poor correlation when the complete data set was taken, but showed good results for some of the ECOSAR chemical classes. The results are discussed in the context of literature data on the performance of ECOSAR and other QSAR models.     

Effects assessment: boron compounds in the aquatic environment

In previous studies, boron compounds were considered to be of comparatively low toxicity in the aquatic environment, with predicted no effect concentration (PNEC) values ranging around 1 mg B/L (expressed as boron equivalent). In the present study, we describe an evaluation of toxicity data for boron available for the aquatic environment by different methods.For substances with rich datasets, it is often possible to perform a species sensitivity distribution (SSD). The typical outcome of an SSD is the Hazardous Concentration 5% (HC₅), the concentration at which 95% of all species are protected with a probability of 95%. The data set currently available on the toxic effects of boron compounds to aquatic organisms is comprehensive, but a careful evaluation of these data revealed that chronic data for aquatic insects and plants are missing. In the present study both the standard assessment factor approach as well as the SSD approach were applied. The standard approach led to a PNEC of 0.18 mg B/L (equivalent to 1.03 mg boric acid/L), while the SSD approach resulted in a PNEC of 0.34 mg B/L (equivalent to 1.94 mg boric acid/L). These evaluations indicate that boron compounds could be hazardous to aquatic organisms at concentrations close to the natural environmental background in some European regions. This suggests a possible high sensitivity of some ecosystems for anthropogenic input of boron compounds. Another concern is that the anthropogenic input of boron could lead to toxic effects in organisms adapted to low boron concentration.     

Germination and seedling growth of the water cress Rorippa sp. exposed to the chelant [S,S]-EDDS

With the implementation of the new EU environmental framework directives, high tier risk assessments of chemicals will be increasingly needed. For high production chemicals, additional tests will complement the standard battery for aquatic toxicity assessments (daphnids, algae, and fish). In the context of a new chemical notification at the European Union level, we have developed a seed germination and root elongation toxicity test with the freshwater aquatic plant Rorippa nasturtium-aquaticum (water cress) to confirm the low environmental risk of the chelant [S,S]-EDDS. A 14 day semi-static growth inhibition test was conducted with daily renewal of the test solution. No concentration related inhibition was found on the basis of any of the criteria investigated, i.e., time and extent of germination, biomass, number of leaves, stalk and root lengths. The no-observed effect concentration was considered to be >or=387 mg SS-EDDS/l. Although germination was selected as an appropriate endpoint to assess the effect of a chelant on an aquatic plant (other endpoints would have been dependant on essential metals that are chelated in standard culture tests), the absence of dose related effects requires further tests with higher exposure concentrations and/or other toxicant(s) to assess the validity of the test as a general tool for aquatic risk assessment.     

Physicochemical substance properties as indicators for unreliable exposure in microplate-based bioassays

In the last years many efforts were made to transform standardized algal test protocols into low-cost microplate assays. While advantages were pointed out frequently, limitations are not systematically addressed, thus hindering a widespread utilisation. In this study a group of organic substances with a wide distribution of volatility (log K_AW from −6.53 to −2.13) and lipophilicity (log K_OW from 1.26 to 4.92) was investigated with respect to the influence of these physicochemical properties on their algal toxicity in different assays. Therefore the EC₅₀ values were determined with a microplate assay based on ISO 8692 protocol and the results were compared with those of an established algal growth inhibition test conducted in air tight glass vessels. Using the ratio of the EC₅₀ values, a clear connection between biological response and volatility as well as lipophilicity of test substances could be detected. Chemicals with a log K_OW higher than 3 or a Henry coefficient log K_AW higher than −4 were identified as less effective in the microplate assay than in the comparative assay. The loss in nominal concentration due to physicochemical properties could be shown to contribute to this using HPLC analysis. Consequently, when using microplate assay’s one should be aware that lipophilic and volatile chemicals might be underestimated in their toxicity, which could be indicated from evaluating related physicochemical properties modelled from structural information prior to an experimental investigation.     

Risk assessment of boron in glass wool insulation

Background, aim and scope  Glass wools are man-made vitreous fibres, which consist principally of sodium, calcium and magnesium silicates, but may contain smaller amounts of other elements, including boron. The boron contents originate from the use of borates in the glass melting process as a glass former and a flux agent. During the production and application of glass wool insulation products, workers may legally be exposed to glass fibre up to the occupational limit value, commonly of 1 fibre/cm³. However, in practice, the fibre exposure will be at least ten times lower. Boron is a non-metallic element widely distributed in nature, where it occurs as boric acid, borates and borosilicates. Humans are mainly exposed to boron via vegetarian food and drinking water, mineral supplements and various consumer products. Boron is an essential element for plant growth, but the essentiality for humans is not proven, although intakes of trace amounts of the element seem to be useful for bone health and proper brain function; higher concentrations of boron, however, may be toxic. In relation to the European Union legislation on dangerous substances, an EU Expert Group has recommended classifying boric acid and borates with risk phrases for reproductive toxicity. The aim of this paper is to assess whether the new EU hazard classification of boron compounds should imply that glass wool products used for building insulation in the future should be labelled, “may impair fertility and cause harm to the unborn child”, because of the low boron content. Materials and methods  Boron intakes are estimated in a worst-case occupational situation with human exposure to glass wool fibres at the occupational limit of 1 fibre/cm³ by calculation of the mass of the amount of fibres inhaled during an 8-h work day. Fibres are supposed to be cylinders of glass with a length of 30 μm, an average diameter of 1.5–2 μm and containing either 1.5% or 3.5% boron. As a worst-case scenario, the density of the fibres is set to 2,700 kg/m³. The inhalation rate of the individuals at moderate work load was set to 2 m³/h. A worst-case scenario also corresponds to 100% retention and to 100% solubility of the retained fibres in the lungs. Results  With the normal boron content of 1.5% in glass wool fibres for building insulation, the extra daily occupational boron intake/uptake will be 0.03–0.06 mg B for 5 days a week. For more uncommon glass wool with maximum boron content of 3.5%, the worst-case daily boron intake/uptake will be 0.08–0.16 mg B. The main boron exposure in the general population is from vegetarian food, and the average daily dietary intake with food is estimated to 1.2–1.5 mg B/day. In addition, significant intakes may come with drinking water, especially from mineral water. In some instances, exposure from mineral supplements, cosmetics and other consumer products may be significant. For example, individuals taking mineral supplements, e.g. for bodybuilding, may have an additional intake to that of 1–10 mg/day. During the years, various organisations have recommended safe intake values for boron. Recently, the Scientific Panel on Dietetic Products, Nutrition and Allergies of the European Food Safety Authority (EFSA) has established the ‘Tolerable Upper Intake Level’ (UL) for the intake of boron (boric acid and borates) at 0.16 mg B/kg body weight per day or about 10 mg B/day for an adult. Discussion  The calculated, worst-case exposure scenario during an 8-h work day will result in an extra daily boron intake that only corresponds to about 10% of the average daily adult boron intakes through food and drinks of about 1.5 mg. The inter-individual variations in boron intakes from foods, water and supplements will be much greater than an eventual, very worst-case, additional intake of boron from inhalation of glass wool fibres. In addition, the combined intakes are far lower than the ‘Tolerable Upper Intake Level’ of 10 mg B/day for a person weighing 60 kg, as recommended by the European Food Safety Agency. The potential boron intake from inhalation of glass wool fibres is also much lower than boron intakes by workers in the boron industry, who at the present occupational limit value will be exposed to 50 mg of boron 5 days a week, or 100 times more than the worst case for glass wool fibres. Furthermore, in practice, exposure levels will mostly be ten to 100 times lower than the occupational limit used here as a worst case. Conclusions  The estimated boron intake from inhalation of glass wool fibres in occupational settings will be insignificant and without any health risks, even in the case of non-compliance with the occupational limit value. Any proposal requiring hazard labels on commercial glass wool products for building insulation, because of the boron content, is not supported by the present scientific knowledge. Recommendations and perspectives  The European Commission should ensure that the new EU hazard classification of boron compounds is not applied to commercial glass wool products for building insulation having a low content of boron.     

A fluorescence-based bioassay for aquatic macrophytes and its suitability for effect analysis of non-photosystem II inhibitors

Background, Goals and Scope During the last years the miniaturization of toxicity test systems for rapid and parallel measurements of large quantities of samples has often been discussed. For unicellular algae as well as for aquatic macrophytes, fluorescence-based miniaturized test systems have been introduced to analyze photosystem II (PSII) inhibitors. Nevertheless, high-throughput screening should also guarantee the effect detection of a broad range of toxicants in order to ensure routinely applicable, high-throughput measuring device experiments which can cover a broad range of toxicants and modes of action others than PSII inhibition. Thus, the aim of this study was to establish a fast and reproducible measuring system for non-PSII inhibitors for aquatic macrophyte species to overcome major limitations for use. Methods A newly developed imaging pulse-amplitude-modulated chlorophyll fluorometer (I-PAM) was applied as an effect detector in short-term bioassays with the aquatic macrophyte species Lemna minor. This multiwell-plate based measuring device enabled the incubation and measurement of up to 24 samples in parallel. The chemicals paraquat-dichloride, alizarine and triclosan were chosen as representatives for the toxicant groups of non-PSII herbicides, polycyclic aromatic hydrocarbons (PAHs) and pharmaceuticals and personal care products (PPCPs), which are often detected in the aquatic environment. The I-PAM was used (i) to establish and validate the sensitivity of the test system to the three non-PSII inhibitors, (ii) to compare the test systems with standardized and established biotests for aquatic macrophytes, and (iii) to define necessary time scales in aquatic macrophyte testing. For validation of the fluorescence-based assay, the standard growth test with L. minor (ISO/DIS 20079) was performed in parallel for each chemical. Results The results revealed that fluorescence-based measurements with the I-PAM allow rapid and parallel analysis of large amounts of aquatic macrophyte samples. The I-PAM enabled the recording of concentration-effect-curves with L. minor samples on a 24-well plate with single measurements. Fluorescence-based concentration-effect-curves could be detected for all three chemicals after only 1 h of incubation. After 4–5 h incubation time, the maximum inhibition of fluorescence showed an 80–100% effect for the chemicals tested. The EC50 after 24 h incubation were estimated to be 0.06 mg/L, 0.84 mg/L and 1.69 mg/L for paraquatdichloride, alizarine and triclosan, respectively. Discussion The results obtained with the I-PAM after 24 h for the herbicide paraquat-dichloride and the polycyclic aromatic hydrocarbon alizarine were in good accordance with median effective concentrations (EC50s) obtained by the standardized growth test for L. minor after 7 d incubation (0.09 mg/L and 0.79 mg/L for paraquat-dichloride and alizarine, respectively). Those results were in accordance with literature findings for the two chemicals. In contrast, fluorescence-based EC50 of the antimicrobial agent triclosan proved to be two orders of magnitude greater when compared to the standard growth test with 7 d incubation time (0.026 mg/L) as well as with literature findings. Conclusion Typically, aquatic macrophyte testing is very time consuming and relies on laborious experimental set-ups. The I-PAM measuring device enabled fast effect screening for the three chemicals tested. While established test systems for aquatic macrophytes need incubation times of ≥ 7 d, the I-PAM can detect inhibitory effects much earlier (24 h), even if inhibition of chemicals is not specifically associated with PSII. Thus, the fluorescence-based bioassay with the I-PAM offers a promising approach for the miniaturization and high-throughput testing of chemicals with aquatic macrophytes. For the chemical triclosan, however, the short-term effect prediction with the I-PAM has been shown to be less sensitive than with long-term bioassays, which might be due to physicochemical substance properties such as lipophilicity. Recommendations and Perspectives The results of this study show that the I-PAM represents a promising tool for decreasing the incubation times of aquatic macrophyte toxicity testing to about 24 h as a supplement to existing test batteries. The applicability of this I-PAM bioassay on emergent and submerged aquatic macrophyte species should be investigated in further studies. Regarding considerations that physicochemical properties of the tested substances might play an important role in microplate bioassays, the I-PAM bioassay should either be accompanied by evaluating physicochemical properties modeled from structural information prior to an experimental investigation, or by intensified chemical analyses to identify and determine nominal concentrations of the toxicants tested. The chemicals paraquat-dichloride, alizarine and triclosan were chosen as representatives for the toxicant groups of non-PSII herbicides, PAHs and PPCPs which are often detected in the aquatic environment. Nevertheless, in order to ensure a routinely applicable measuring device, experiments with a broader range of toxicants and samples of surface and/or waste waters are necessary. ESS-Submission Editor: Dr. Markus Hecker (MHecker@Entrix.com)     

Effect of humic acids on the toxicity of pollutants to Chlamydomonas reinhardtii: Investigation by a microscale algal growth inhibition test

Dissolved humic substances (DHSs) are the major components of organic matter in the aquatic environment. DHSs are well known to considerably affect the speciation, solubility, and toxicity of a wide variety of pollutants in the aquatic environment. In this study, the effects of the toxicity of heavy metals and hydrophobic organic pollutants (HOPs) on Chlamydomonas reinhardtii in the presence of humic acid (HA) were examined by a microscale algal growth inhibition (μ-AGI) test based on spectrophotometric detection. To clarify the relationship between the chemical properties of HAs and the toxicity change of pollutants, eight HAs from different sources were prepared and used. HAs were responsible for mitigating the toxicity of Hg, Cu, pesticides (γ-HCH, 2,4-D, and DDT), and polycyclic aromatic hydrocarbons (PAHs) such as naphthalene (Nap), anthracene (Ant), and benzo[a]pyrene (BaP). In particular, an approximately 100-fold decrease in the toxicity of BaP was observed in the presence of 10 ppm HAs extracted from tropical peat. The results indicated that the carboxylic group content and the HA molecular weight are correlated to the changes in the heavy metal toxicity. For HOPs, the aromaticity and polarity of HAs are crucial for mitigating their toxicity. Furthermore, it was clearly shown that the lake water including a high concentration of DHSs collected from Central Kalimantan, Indonesia, reduced the toxicity of Hg and γ-HCH on Chlamydomonas reinhardtii.

Graphical abstract

     

Statistical evaluation of chronic toxicity data on aquatic organisms for the hazard identification: the chemicals toxicity distribution approach

Presently, in the Globally Harmonised System of Classification and Labelling of Chemicals the classification of substances for long-term effects to aquatic life is based on acute toxicity in combination with degradation and/or bioaccumulation potential. Recently an OECD Working Group was created to develop the classification scheme to accommodate chronic toxicity data related to aquatic organisms for assigning a chronic hazard category. This study focuses on a new approach for setting chronic toxicity cut-off values based on Chemicals Toxicity Distributions (CTDs). A CTD is obtained through statistical fitting of the data used by regulatory bodies for setting hazard-based classifications. The CTDs were made using the lowest aquatic NOEC value of each chemical. A review of different toxicological sources reporting acute aquatic toxicities was carried out. Initially, the data were arranged according to the specific source and distributions for key taxonomic groups (i.e. fishes, crustaceans and algae) were evaluated separately. In most cases, no significant departures from normality were observed. Thereafter, a compiled database containing >900 values was developed and the CTDs were constructed for each taxonomic group. Significant deviation from normality (P < 0.05) was observed in the fishes and crustaceans' CTDs. However, this deviation was apparently produced by the presence of only seven values with NOECs <1 x 10(-5) mg l(-1), while high correlation between the data and the normal scores (r-values>or= 0.989) indicated that the data were samples from normal distributions. From these observations, potential cut-off values would allow quantitative estimations of the percentage of chemicals falling into each specific category. This approach results in a simple classification hazard scheme where most chemicals are covered in one of the categories, allowing a clear distribution of the chemicals among three categories for chronic toxicity.     

Indicators for Chemicals: Sources,impacts and policy performance (5 pp)

Background Different types of indicators have been developed to describe the impact of chemicals on society and environment. Due to the high number of substances and their different types of use, most of these indicators are directed to specific areas of interest – regarding workplace safety, environmental health or consumer health. They address a specific subset of chemicals and can be used for monitoring enterprise-specific, national or international management measures. Main Features A survey of existing indicators for chemicals has shown that indicators already exist for a remarkable number of problem fields. As soon as the release and the environmental fate of chemicals are taken into account, the complexity of the approaches increases considerably. The distinction between indicators for drivers, pressures, state, impacts and responses, as proposed by the European Environmental Agency, supports the identification of proper indicators for a specific type of problem. Discussion and Conclusions. No single indicator exists which is able to cover the whole range of chemicals and their applications. Several indicator approaches cover at least a subset of the most relevant substances. If they are intended to be used for European monitoring, robust data must be provided by EU Member States. Chemicals in enterprises (ancillary inputs as well as process chemicals) are an important element of in-plant material flow management – in terms of occupational safety and health as well as environmental protection. Existing indicators for hazardous chemicals can be a valuable tool for process and product refinement regarding hazardous chemicals, especially for enterprises. Outlook Indicators for production and impact of chemicals, as well as policy performance indicators, are essential elements in order to monitor the management of chemicals. They have to be established for the national and for the EU level.     

Toxicity of chlorophenols to Pseudokirchneriella subcapitata under air-tight test environment

A closed-system algal toxicity test with no headspace was applied to evaluate the toxicity of chlorophenols to Pseudokirchneriella subcapitata. The dissolved oxygen production and the growth rate based on cell density were the response endpoints. Phenol and seven chlorophenols were tested using the above test technique. Median effective concentrations (EC50) range from 0.004 to 25.93 mg/l (based on DO production) and 0.0134 to 20.90 mg/l (based on growth rate). No-observed-effect concentration (NOEC) is within the range of 0.001-8.19 mg/l. In general, growth rate is a more sensitive response endpoint than the oxygen production, except for the case of pentachlorophenol. However, the differences in sensitivity between the two parameters were marginal. Furthermore, quantitative structure-activity relationships (QSAR's) based on the n-octanol/water partition coefficient (log P) and the acid dissociation constant (pK(a)) values were established with R(2) ranged from 0.90 to 0.96. From literature data also based on P. subcapitata, the new test method is 1.65-108 times more sensitive than the conventional algal batch tests. A completely different relative-sensitivity relationship among various aquatic organisms was thus observed. The results of this study indicate that the toxicity data of volatile organic chemicals derived by conventional algal toxicity tests may severely underestimate the impact of these toxicants. Our results show that alga is very sensitive to chlorophenols compared to other aquatic organisms such as the luminescent bacteria (the Microtox test), Daphnia magna, and rainbow trout.     

Biodegradation in laboratory activated sludge plants and aquatic toxicity of herbicides

The biodegradation and the aquatic toxicity of four herbicides (isoproturon, terbuthylazine, mecoprop, metamitron) were investigated. Laboratory activated sludge plants were used for biodegradation experiments. The biodegradation of mecoprop reached nearly 100%, the other herbicides were not eliminated by biodegradation. The acute Daphnia magna 24-h assay, the algal 72-h inhibition test, and the recently developed lemna growth inhibition 7-d test were applied to evaluate the biological effects of herbicides as original substances. EC 50 and EC 10 values were determined. Algal and lemna test show that isoproturon and terbuthylazine are both much more toxic than mecoprop and metamitron. Daphnids are generally less sensitive against herbicides than plants. Biodegradation and toxicity test were coupled for mecoprop to assess biological long-term effects of possible biodegradation products of this herbicide. The effluents of the laboratory activated sludge units were used in toxicity tests (Daphnia magna 21-d reproduction test, lemna growth inhibition 7-d test). No inhibiting effect on the tested organisms was observed.     

Acute toxicity tests with Daphnia magna, Americamysis bahia, Chironomus riparius and Gammarus pulex and implications of new EU requirements for the aquatic effect assessment of insecticides

Threshold concentrations for treatment related effects of 31 insecticides, as derived from aquatic micro-/mesocosm tests, were used to calibrate the predictive value of the European Tier-1 acute effect assessment on basis of laboratory toxicity tests with Daphnia magna, Chironomus spp., Americamysis bahia and Gammarus pulex. The acute Tier-1 effect assessment on basis of Daphnia (EC(50)/100) overall was protective for organophosphates, carbamates and most pyrethroids but not for neonicotinoids and the majority of insect growth regulators (IGRs) in the database. By including the 28-day water-spiked Chironomus riparius test, the effect assessment improves but selecting the lowest value on basis of the 48-h Daphnia test (EC50/100) and the 28-day Chironomus test (NOEC/10) is not fully protective for 4 out of 23 insecticide cases. An assessment on basis of G. pulex (EC(50)/100) is sufficiently protective for 15 out of 19 insecticide cases. The Tier-1 procedure on basis of acute toxicity data (EC(50)/100) for the combination of Daphnia and A. bahia and/or Chironomus (new EU dossier requirements currently under discussion) overall is protective to pulsed insecticide exposures in micro-/mesocosms. For IGRs that affect moulting, the effect assessment on basis of the 48-h Chironomus test (EC(50)/100) may not always be protective enough to replace that of the water-spiked 28-day C. riparius test (NOEC/10) because of latency of effects.     

Environmental risk assessment of musk ketone and musk xylene in the Netherlands in accordance with the EU-TGD

An environmental risk assessment has been carried out for musk ketone and musk xylene according to the EU Technical Guidance Document for Environmental Risk Assessment for New and Existing Substances [1]. Musk ketone and musk xylene are used in fragrances for cosmetics and household products. For the fragrance industry these are important fragrance ingredients because of their excellent substantivity as well as for their unique smell, which determines largely the odor of a product.

The initial environmental risk assessment is based on information provided by the fragrance industry as represented in the Netherlands by its association NEA, by the Research Institute for Fragrance Materials (RIFM) and data reported in the international open literature. The risk assessment includes an evaluation of the risks for aquatic organisms in surface water and sediment and for soil organisms in soil after application of sewage sludge. Secondary poisoning of fish-eating birds and mammals is considered as well. For each compartment the Predicted Environmental Concentration (PEC) is compared to the Predicted No Effect Concentration (PNEC) to obtain PEC/PNEC ratios. Since monitoring data are available in water, sediment and fish, similar ratios are obtained with measured concentrations instead of the predicted ones.

For both substances, PEC/PNEC ratios are at or below 0.1 for organisms in the aquatic environment, including sediment organisms. PEC/PNEC ratios for fish-eating predators are 0.01. Ratios based on monitoring data are below 0.01 for all of these organisms. For soil organisms the PEC/PNEC ratio is 0.5 for musk ketone and 1.3 for musk xylene. Although in the Netherlands (as well as in some other European countries), sewage sludge presently finds no application as fertilizer on agricultural soil, the aim of environmental policy is to upgrade the sludge quality to enable future applications on agricultural and grassland. The reliability of the predicted soil concentrations can be greatly improved by obtaining experimental data on fate and behaviour of musk ketone and musk xylene in digested sludge and soil.

The risk assessment provides reassurance for the aquatic compartment while pointing the way for obtaining aditional data for the soil compartment.     

Are individual NOEC levels safe for mixtures? A study on mixture toxicity of brominated flame-retardants in the copepod Nitocra spinipes

In aquatic ecosystems organisms are exposed to mixtures of pollutants. Still, risk assessment focuses almost exclusively on effect characterization of individual substances. The main objective of the current study was therefore to study mixture toxicity of a common group of industrial substances, i.e., brominated flame-retardants (BFRs), in the harpacticoid copepod Nitocra spinipes. Initially, 10 BFRs with high hydrophobicity but otherwise varying chemical characteristics were selected based on multivariate chemical characterization and tested individually for effects on mortality and development using a partial life cycle test (six days) where silica gel is used as a carrier of the hydrophobic substances. Based on these findings, six of the 10 BFRs were mixed in a series of NOEC proportions (which were set to 0.008, 0.04, 0.2, 1, and five times the NOEC concentrations for each individual BFR), loaded on silica gel and tested in a full life cycle test (26 days). Significantly increased mortality was observed in N. spinipes after six and 26 days exposure at a NOEC proportion that equals the NOEC LDR value (x1) for each BFR in the mixture (p=0.0015 and p=0.0105, respectively). At the NOECx5 proportion all animals were dead. None of the other NOEC proportions caused significant negative responses related to development and reproduction. This shows that low concentrations of individual substances can cause toxicity if exposed in mixtures, which highlights the need to consider mixture toxicity to a greater extent in regulatory work.     

Adaptation of the Daphnia sp. acute toxicity test: miniaturization and prolongation for the testing of nanomaterials

Manufacturing of nanomaterials (NMs) is often complex and expensive, and their environmental risks are poorly understood or even unknown. An economization of testing NMs is therefore desirable, which can be achieved by miniaturizing test systems. However, the downsizing of test vessels and volumes can enlarge the surface/volume ratio (SVR) which in turn can affect the bioavailable concentration of adsorbing substances like NMs. The present study focused on the miniaturization of the acute toxicity test with Daphnia magna. The adaptations were verified with three reference substances, the non-adsorbing potassium dichromate (K₂Cr₂O₇) and as potentially highly-adsorbing substances silver nanoparticles (AgNPs) and silver nitrate (AgNO₃). The miniaturized test was conducted in 24-well microtiter plates (MT) and simultaneously compared to the OECD standard test (ST). Furthermore, the test duration was prolonged from 48 to 96 h since NMs tend to show effects only after extended exposure. The toxicity of K₂Cr₂O₇ and AgNPs continued to increase within the prolonged test span. The test comparisons with K₂Cr₂O₇ did not reveal any significant differences between ST and MT. AgNO₃ toxicity was significantly decreased in MT compared to ST due to the enlarged SVR. The toxicity of AgNPs in MT after 24 h was equal to ST. Contrary to our expectations an exposure longer than 24 h resulted in an increase of AgNP toxicity in MT, possibly due to enhanced dissolution of silver. Microtiter plates are appropriate alternative test vessels for the Daphnia sp. acute toxicity test; thus, its miniaturization is feasible. The enlarged SVR has to be taken into account since it can affect the toxicity of potentially adsorbing substances. Furthermore, the standard test duration of 48 h might underestimate the toxicity of many substances, especially of NMs.     

Screening of organophosphorus compounds and their distribution in various indoor environments

Twelve organophosphorus compounds (OPs), which are used for diverse purposes (e.g. as plasticizers and flame retardants), were analysed in settled house dust from 15 indoor environments and in wipe test samples from computer screens and covers. Seven of the substances analysed dominated Swedish imports of OPs in 1999, six of these are also listed as EU High Production Volume Chemicals. Eight of the substances were found in all samples. Tris(2-butoxyethyl)phosphate was the most abundant in most of the samples, with levels ranging from 0.014 to 5.3 g/kg followed by tris(2-chloroethyl)phosphate, tris(chloropropyl)phosphate and tris(1,3-dichloropropyl)phosphate. In wipe test samples from computers, triphenyl phosphate proved to be the main component of the OPs analysed (4.0 microg/m2). Potential sources of these compounds include, inter alia, floor polish, polyvinylchloride floor coverings, upholstery and plastic products. The distribution patterns of the OPs differed between the sites and generally reflected the building materials and consumer products used in their vicinity.     

Assessing the toxicity of organophosphorous pesticides to indigenous algae with implication for their ecotoxicological impact to aquatic ecosystems

This study aimed to determine the toxicity of three organophosphorous pesticides, chlorpyrifos, terbufos and methamidophos, to three indigenous algal species isolated from local rivers and algal mixtures. The diatom Nitzschia sp. (0.30–1.68 mg L^?1 of EC₅₀ -the estimated concentration related to a 50% growth reduction) and the cyanobacteria Oscillatoria sp. (EC₅₀ of 0.33–7.99 mg L^?1) were sensitive to single pesticide treatment and the chlorophyta Chlorella sp. was the most tolerant (EC₅₀ of 1.29–41.16 mg L^?1). In treatment with the mixture of three pesticides, Chlorella sp. became the most sensitive alga. The antagonistic joint toxic effects on three indigenous algae and algal mixtures were found for most of the two pesticide mixtures. The results suggested that mixture of pesticides might induce the detoxification mechanisms more easily than the single pesticide. The synergistic interactions between terbufos and methamidophos to algal mixtures and between methamidophos and chlorpyrifos to Nitzschia sp. indicated methamidophos might act as a potential synergist. Differential sensitivity of three families of algae to these pesticides might result in changes in the algal community structures after river water has been contaminated with different pesticides, posing great ecological risk on the structure and functioning of the aquatic ecosystem.     

Classifying environmental pollutants: Part 3. External validation of the classification system

In order to validate a classification system for the prediction of the toxic effect concentrations of organic environmental pollutants to fish, all available fish acute toxicity data were retrieved from the ECETOC database, a database of quality-evaluated aquatic toxicity measurements created and maintained by the European Centre for the Ecotoxicology and Toxicology of Chemicals. The individual chemicals for which these data were available were classified according to the rulebase under consideration and predictions of effect concentrations or ranges of possible effect concentrations were generated. These predictions were compared to the actual toxicity data retrieved from the database. The results of this comparison show that generally, the classification system provides adequate predictions of either the aquatic toxicity (class 1) or the possible range of toxicity (other classes) of organic compounds. A slight underestimation of effect concentrations occurs for some highly water soluble, reactive chemicals with low log K(ow) values. On the other end of the scale, some compounds that are classified as belonging to a relatively toxic class appear to belong to the so-called baseline toxicity compounds. For some of these, additional classification rules are proposed. Furthermore, some groups of compounds cannot be classified, although they should be amenable to predictions. For these compounds additional research as to class membership and associated prediction rules is proposed.