The influence of FeCl3 on the photocatalytic degradation of dissolved azo dyes in aqueous TiO2 suspensions

The study concerned decolouration of solutions of azo, anionic (Acid Orange 7, Reactive Red 45, Acid Yellow 23) and cationic (Basic Blue 41 and Basic Orange 66) dyes during illumination with UV (lambdamax 366 nm) irradiation in the presence of TiO2 and FeCl3. The process of decolouration during illumination of the solutions studied containing FeCl3 underwent significant intensification in the case of anionic dyes and unfavourable inhibition in case of cationic dyes. It was also observed that FeCl3 had a diverse influence on the adsorption of the dyes studied on TiO2. The adsorption of anionic dyes and decolouration of solutions before the illumination was observed only in the presence of FeCl3. In case of cationic dyes the addition of FeCl3 caused elimination of these phenomena. An additional cause of decolouration of anionic dyes solutions before illumination was the precipitation of their poorly soluble compounds from Fe3+. The processes of degradation and mineralization of the dye that accompanied decolouration of Acid Orange 7 solutions were also observed. It was stated that similarly to the case of Acid Orange 7, the decolouration of the studied anionic dyes' solutions can depend on the concentration of FeCl3, the amount of TiO2 and the initial concentration of the dye in its solution.     

Degrading a mixture of three textile dyes using photo-assisted electrochemical process with BDD anode and O2–diffusion cathode

In this paper, degradation of a mixture of three azo dyes was studied by the photo-assisted electrochemical process using an O₂-diffusion cathode containing carbon nanotubes and boron-doped diamond (BDD) anode. The concentration of three textile dyes (C.I. Acid Orange 8 (AO8), C.I. Acid Orange 10 (AO10), and C.I. Acid Orange 12 (AO12)) was determined simultaneously despite the severe overlap of their spectra. For this purpose, partial least square (PLS), as a multivariate calibration method, was utilized based on recording UV–Vis spectra during the decolorization process. Moreover, the central composite design was used for the modeling of photo-assisted electrochemical decolorization of the aqueous solutions containing three dyes. The investigated parameters were the initial concentration of three dyes, applied current and reaction time. Analysis of variance (ANOVA) revealed that the obtained regression models match the experimental results well with R (Khataee et al. 2010, Clean-Soil Air Water 38 (1):96–103, 2010) of 0.972, 0.971, and 0.957 for AO8, AO10, and AO12, respectively. Three-dimensional surface and contour plots were applied to describe the relation between experimental conditions and the observed response. The results of TOC analysis confirmed good ability of proposed photo-assisted electrochemical process for degradation and mineralization of textile industry wastewater.     

活性炭纤维对染料的吸附性能研究

研究了聚丙烯腈活性炭纤维（P－ACF）、粘胶活性炭纤维（R－ACF）和颗粒活性炭（GAC）对5种红色染料的吸附能力,通过简单的模型,算出5种染料在两种活性炭纤维上的吸附速率常数。结果表明,尽管吸附能力随染料种类不同而有一定的差别,但总体上,聚丙烯腈活性炭纤维的吸附能力略低于颗粒活性炭,而粘胶活性炭纤维的吸附能力则远远优于前两种,对染料有着较大的吸附容量和较快的吸附速率。     

Advanced oxidation processes in azo dye wastewater treatment.

The chemical degradation of synthetic azo dyes color index (C.I.) Acid Orange 7, C.I. Direct Orange 39, and C.I. Mordant Yellow 10 has been studied by the following advanced oxidation processes: Fenton, Fenton-like, ozonation, peroxone without or with addition of solid particles, zeolites HY, and NH4ZSM5. Spectrophotometric (UV/visible light spectrum) and total organic carbon measurements were used for determination of process efficiency and reaction kinetics. The degradation rates are evaluated by determining their rate constants. The different hydroxyl radical generation processes were comparatively studied, and the most efficient experimental conditions for the degradation of organic azo dyes solutions were determined.     

流动注射分光光度法研究离子强度对活性炭吸附阴、阳离子染料的影响

运用流动注射分光光度法,考察了不同离子强度(NaCl)下,在水溶液中表面带负电的活性炭分别吸附阴、阳离子染料的动力学行为。实验结果表明,对于所考察的2种阳离子染料和3种阴离子染料,活性炭的表观吸附速率常数均随着离子强度的增大而增大。这种加速吸附效应的出现,主要是因为离子强度的增大促进了活性炭表面与染料之间的非静电力作用。     

Fixed bed adsorption of acid dyes onto activated carbon

The context of the study here is the adsorption of acid dyes from wastewater arising from a nylon carpet printing plant which currently receives no treatment. Since nylon is a particularly difficult fibre to dye, acid dyes are required for successful coloration. However, their presence, in high concentrations, in aqueous effluent arising from the plant can create major problems with respect to disposal. A treatment method based on adsorption onto granular activated carbon (GAC F400) in a fixed column configuration is described and breakthrough data of the dyes determined. The breakthrough data were correlated using a model based on liquid and pore diffusion with a good fit of experimental results obtained. Trends in the effective diffusivity used in the model correlated with other authors. A slight decrease in effective diffusivity was found with decrease in particle size and was attributed to interactions between the relatively large molecular sized dye and the microspore structure found in granular activated carbon.     

褐煤对废水中酸性红B的吸附去除

选用褐煤作为廉价吸附剂,脱除模拟废水中染料酸性红B。研究了褐煤对废水中酸性红B的吸附动力学、等温吸附模式,考察了pH、褐煤投加量以及离子强度(NaCl)对吸附效果的影响。结果表明,吸附动力学较好地符合准二级速率方程(R2=1.000),并且以化学吸附为主;吸附等温式满足Langmuir方程(R2=0.986),最大单分子层吸附量为42 mg/g;废水中染料的去除率随溶液pH的减小而明显增加,在pH=1时,去除效果最好,证实吸附过程存在静电吸引及化学键合;在一定条件下,溶液中酸性红B的去除率随褐煤投加量增加而增加;吸附效果随溶液中离子强度(NaCl)的增加而增强。说明褐煤可以作为一种廉价吸附材料,用于处理含染料废水。     

污泥吸附剂对3种染料吸附动力学的研究

以污水厂脱水污泥、锯末和焦油的混合物为原料，选择ZnCl₂为活化剂制备出过渡孔发达、强度大的污泥吸附剂（S-AC）。借助BET、FT-IR等现代分析测试方法对污泥吸附剂进行表征，同时，研究了吸附剂对酸性大红、中性红和碱性品红吸附动力学行为。结果表明，制得的污泥吸附剂BET比表面积为358 m²/g，强度大于89%。吸附剂的动力学数据均符合伪二阶动力学方程、液膜扩散方程和颗粒内扩散方程，其中液膜扩散为吸附剂对酸性大红吸附过程的主控步骤，颗粒内扩散为吸附剂对中性红和碱性品红吸附过程的主控步骤。     

Characterization of activated carbons prepared from sugarcane bagasse by ZnCl2 activation.

Activated carbons were prepared from the agricultural waste of sugarcane bagasse by the chemical activation with zinc chloride (ZnCl2) at the activation temperature of 500 degrees C with soaking time of 0.5 hour. The influence of activation parameters on the final carbon products was examined by varying the impregnation ratio (i.e., mass ratio of added ZnCl2 to bagasse) and bagasse size. The physical properties of carbon products were characterized by nitrogen adsorption/desorption isotherms (at 77 K) and helium displacement method. The surface area and pore volume of carbons were thus obtained by the BET equation and t-plot method. Also, the particle density and porosity of carbons were estimated by the total pore volume and true density. The increases of the values of surface area and pore volume are approximately proportional to the impregnation ratio. The microporous carbon product with the BET surface area of 905 m2/g and total pore volume of 0.44 cm3/g was obtained in the present study. Further, the adsorption isotherms of two acid dyes from aqueous solutions onto the carbon products were performed at 30 degrees C. The results show that the adsorption isotherms of acid dyes with high molecular weight or large molecular size on the microporous adsorbents of activated carbons are plateau forms, indicating multilayer adsorptions, which may be attributed to the steric hindrance of the adsorbate molecules.     

Application of zeolite-activated carbon macrocomposite for the adsorption of Acid Orange 7: isotherm, kinetic and thermodynamic studies

In this study, the adsorption behavior of azo dye Acid Orange 7 (AO7) from aqueous solution onto macrocomposite (MC) was investigated under various experimental conditions. The adsorbent, MC, which consists of a mixture of zeolite and activated carbon, was found to be effective in removing AO7. The MC were characterized by scanning electron microscopy (SEM), energy dispersive X-ray, point of zero charge, and Brunauer–Emmett–Teller surface area analysis. A series of experiments were performed via batch adsorption technique to examine the effect of the process variables, namely, contact time, initial dye concentration, and solution pH. The dye equilibrium adsorption was investigated, and the equilibrium data were fitted to Langmuir, Freundlich, and Tempkin isotherm models. The Langmuir isotherm model fits the equilibrium data better than the Freundlich isotherm model. For the kinetic study, pseudo-first-order, pseudo-second-order, and intraparticle diffusion model were used to fit the experimental data. The adsorption kinetic was found to be well described by the pseudo-second-order model. Thermodynamic analysis indicated that the adsorption process is a spontaneous and endothermic process. The SEM, Fourier transform infrared spectroscopy, ultraviolet–visible spectral and high performance liquid chromatography analysis were carried out before and after the adsorption process. For the phytotoxicity test, treated AO7 was found to be less toxic. Thus, the study indicated that MC has good potential use as an adsorbent for the removal of azo dye from aqueous solution.     

染色废水吸附混凝效应研究

用自制的酸性膨润土用无机混凝剂Ａｌ２（ＳＯ４）３联用处理含酸性红３Ｂ,弱酸橙ＧＳ和弱酸艳绿５Ｇ等染料的合成废水,以ＣＤＯＣＲ去除率和脱色率来表征吸附的处理效果,结果表明,酸性膨润土和酸性膨润土－硫酸铝两种吸收混凝剂的废水处理效果无明显差异,其效率与染料种类有关,处理含５Ｇ绿废水的效果优于含ＧＳ橙和３Ｂ红废水。     

褐煤活性炭吸附处理焦化废水

研究褐煤活性炭吸附处理焦化废水的性能，为褐煤活性炭用于废水处理提供理论依据和技术指导。以河南某气化厂的焦化废水为吸附原水，进行褐煤活性炭对酚吸附性能的静态和动态实验。静态实验表明，褐煤活性炭对酚的吸附性能符合弗兰德里希（Freundlich）吸附方程式。在室温条件下，对于150 mL焦化废水，当活性炭的用量为10 g，吸附反应时间为1 h，酚的去除率可达92%以上。动态实验研究表明，当进水酚浓度为3 800 mg/L，吸附1.5 h，活性炭的吸附容量可达21.38 mg/g。水处理的实验研究表明，利用褐煤制备的活性炭，对焦化废水具有良好的处理效果。     

零价铁复合有机膨润土处理染料废水的研究

针对目前印染废水处理现状及膨润土在水处理中回收困难等问题，提出将零价铁复合到有机膨润土中制成零价铁复合有机膨润土(ZVI-OB)，以达到高效吸附并降解污染物的目的。以染料废水(Orange II) 作为研究对象，考察了废水中染料的初始浓度、pH以及吸附时间对ZVI-OB去除染料效率的影响，并研究了吸附后降解过程中时间和pH对污染物降解的影响以及降解前后膨润土层结构的变化。研究结果表明，ZVI-OB相对于CTMAB改性的有机膨润土而言，其吸附量有所降低，但ZVI-OB在吸附污染物之后能有效降解有机物。ZVI-OB在饱和吸附Orange II后经催化氧化，总有机碳含量降低为原来的19%，可以重复利用。     

The evaluation of electrical energy per order (E(Eo)) for photooxidative decolorization of four textile dye solutions by the kinetic model

Photooxidative decolorization of four textile dyestuffs, C.I. Acid Orange 7 (AO7), C.I. Acid Orange 8 (AO8), C.I. Acid Orange 52 (AO52) and C.I. Acid Blue 74 (AB74), by UV/H2O2 was investigated in a laboratory scale photoreactor equipped with a 15 W low pressure mercury vapour lamp. The decolorization of the dyes was found to follow pseudo-first-order kinetics, and hence the figure-of-merit electrical energy per order (E(Eo)) is appropriate for estimating the electrical energy efficiency. The E(Eo) values were found to depend on the concentration of H2O2, concentration and basic structure of the dye. This study shows that these textile dyes can be treated easily and effectively with the UV/H2O2 process with E(Eo) values between 0.4 and 5 kW h m-3 order-1, depending on the initial concentrations of dyes and H2O2. The kinetic model, based on the initial rates of degradation, provided good prediction of the E(Eo) values for a variety of conditions.     

Reducing degradation of azo dye by zero-valent iron in aqueous solution

The reducing degradation kinetics of five azo dyes, Acid orange II, Acid orange IV, Acid orange GG, Acid red 3B and Orange I, by zero-valent iron powder in aqueous solution were studied. It showed that the degradation is a two-step reaction, with the first step being reversible. Solution acidity and iron surface area are the factors greatly influencing the degradation rates, and with increasing of acidity and iron surface area, the degradation rates increase.     

Adsorption characteristics of 2,4-dichlorophenoxyacetic acid (2,4-D) from aqueous solution on powdered activated carbon

The removal of 2,4-dichlorophenoxyacetic acid (2,4-D), one of the most commonly used phenoxy acid herbicides, from aqueous solution was studied by using acid-washed powdered activated carbon (PAC) as an adsorbent in a batch system. Adsorption equilibrium, kinetics, and thermodynamics were investigated as a function of initial pH, temperature, and initial 2,4-D concentration. Powdered activated carbon exhibited the highest 2,4-D uptake capacity of 333.3 mg g(-1) at 25 degrees C and an initial pH value of 2.0. Freundlich, Langmuir, and Redlich-Peterson isotherm models were used to express the equilibrium data of 2,4-D depending on temperature. Equilibrium data fitted very well to the Freundlich equilibrium model in the studied concentration range of 2,4-D at all the temperatures studied. Three simplified models including pseudo-first-order, pseudo-second-order, and saturation-type kinetic models were used to test the adsorption kinetics. It was shown that the adsorption of 2,4-D on PAC at 25, 35, and 45 degrees C could be best fitted by the saturation-type kinetic model with film and intraparticle diffusions being the essential rate-controlling steps. The activation energy of adsorption (EA) was determined as--1.69 kJ mole(-1). Using the thermodynamic equilibrium coefficients obtained at different temperatures, the thermodynamic constants of adsorption (deltaG degrees, deltaH degrees, and deltaS degrees) were also evaluated.     

人工湿地基质的筛选及其对猪场废水厌氧消化液中氨氮吸附性能研究

采用静态吸附实验,对比了岷江砂、沱江砂、青衣江砂、沸石、活性炭对猪场废水厌氧消化液中氨氮的吸附去除效率,基于氨氮去除能力、购买成本与运费的比较,筛选出性价比较高的基质--岷江砂作为四川地区人工湿地的基质处理猪场废水厌氧消化液.吸附实验表明,砂对氨氮的去除率随振荡时间和投加量的增加而增加.通过吸附等温曲线Langmuir...     

Removal of arsenic(V) from aqueous solutions using iron-oxide-coated modified activated carbon.

Removal of arsenic(V) from aqueous solutions was evaluated with the following three different sorption materials: coal-based activated carbon 12 x 40 (activated carbon), iron(II) oxide (FeO)/activated carbon-H, and iron oxide. The apparent characteristics and physical chemistry performances of these adsorbents were investigated by X-ray diffraction, nitrogen adsorption, and scanning electronic microscope. Also, batch experiments for arsenic removal were performed, and the effects of pH value on arsenic(V) removal were studied. The results suggest that the main phases of the iron oxide surface are magnetite, maghemite, hematite, and goethite; fine and uniform iron oxide particles can cover activated carbon surfaces and affect the surface area or pore structures of activated carbon; adsorption kinetics obey a pseudo-first-order rate equation; and adsorption capacities of adsorbents are affected by the values of pH. The optimum value of pH for iron oxide lies in a narrow range between 4.0 and 5.5, and arsenic(V) removal by FeO/activated carbon-H is ideal and stable in the pH range 3 to 7, while activated carbon has the lowest adsorption capacity in the entire pH range. Also, the adsorption characteristics of FeO/activated carbon-H composites and virgin activated carbon match well the Langmuir adsorption model, while those of iron oxide fit well the Freundlich adsorption model.     

剩余污泥对酸性大红G的吸附

以剩余污泥为吸附剂,研究其对模拟废水中酸性大红G的吸附条件及吸附机理。结果表明,剩余污泥对酸性大红G的吸附是一个快速过程,吸附时间可控制在30 min;其吸附过程同时受液膜扩散和颗粒内扩散的影响,可以用假二级动力学模型进行描述和预测;Freundlich方程可以较好地描述剩余污泥对酸性大红G的吸附行为。污泥未调pH时,对pH<2的溶液中酸性大红G的吸附性能良好;污泥pH为1时,对实验范围(pH<11)溶液中的酸性大红G均可有效吸附;污泥投加量增加,酸性大红G去除率升高,但污泥对酸性大红G的吸附量下降。