Characteristics of Composition B particles from blow-in-place detonations

We sampled residues from high-order and low-order blow-in-place detonations of mortars and projectiles filled with Composition B (Comp B), a TNT and RDX mixture. Our goals were to (1) characterize the types of explosive particles, (2) estimate the explosive 'footprint' for different munitions, and (3) estimate the mass of Comp B remaining after each detonation. The aerial deposition of Comp B particles helps estimate how large of an area is contaminated by a low-order detonation and how best to sample residue resulting from different rounds. We found that the high-order detonations deposited microgram to milligram quantities whereas the low-order detonations deposited gram quantities of Comp B. For the high-order detonations the concentration of Comp B in the residue decreased as a function of distance from the blast. The low-order tests scattered centimeter-sized chunks and millimeter-sized or smaller particles of Comp B. The chunks were randomly scattered whereas the number of millimeter-sized particles decreased with distance from the detonation. For both high- and low-order detonations we found that the smaller munitions deposited less Comp B than the larger munitions and deposited it closer to the detonation point.     

RDX and TNT residues from live-fire and blow-in-place detonations

Snow was used as a collection medium to examine 1,3,5-hexahydro-1,3,5-trinitrotriazine (RDX) and 2,4,6-trinitrotoluene (TNT) residues post-detonation of 60-, 81-, and 120-mm mortar rounds, 105- and 155-mm howitzer rounds, M67 hand grenades, 40-mm rifle grenades, and blocks of C4. Residue-covered snow samples were collected, processed, and analyzed for explosives without cross-contamination from previous detonations and other potential matrix interferences. Detonation trials were performed following standard military live-fire and blow-in-place techniques. When possible, replicate munitions were detonated under similar conditions to provide a more reliable estimation of the mass of unconsumed high explosive residues. Overall the amount of energetic residues deposited from live-fire detonations were considerably less than the energetic residues deposited by blow-in-place detonations.     

Effective elution of RDX and TNT from particles of Comp B in surface soil

During live fire training exercises, large amounts of explosives are consumed. Low order detonations of high explosive payloads result in the patchy dispersal of particles of high explosive formulations over large areas of firing range soils. Dissolution of explosives from explosive formulation particles into soil pore water is a controlling factor for transport, fate, and effects of explosive compounds. We developed an empirical method to evaluate soils based on functionally defined effective dissolution rates. An automated Accelerated Solvent Extractor was used to determine the effective elution rates under controlled conditions of RDX and TNT from soil columns containing particles of Comp B. Contrived soils containing selected soil geosorbants and reactive surfaces were used to quantitatively determine the importance of these materials. Natural soils from training ranges of various soil types were also evaluated. The effects of geosorbants on effective elution rates were compound- and sorbent-specific. TNT elution was less than that of RDX and was greatly slowed by humic acid. Iron and iron-bearing clays reduced the effective elution rates of both RDX and TNT. This empirical method is a useful tool for directly generating data on the potential for explosives to leach from firing range soils, to identify general bulk soil characteristics that can be used to predict the potential, and to identify means to engineer soil treatments to mitigate potential transport.     

Comparing solid phase extraction and direct injection for the analysis of ultra-trace levels of relevant explosives in lake water and tributaries using liquid chromatography-electrospray tandem mass spectrometry

Off-line solid phase extraction and direct injection analysis were evaluated for the determination of traces of explosives such as TNT and its mono and diamino metabolites, HMX, RDX, nitroglycerin and PETN in lake water and tributaries applying liquid chromatography-electrospray tandem mass spectrometry. Improved chromatographic separation was achieved on a phenyl based stationary phase with baseline resolution of the mono- and diamino metabolites of TNT. Identification and quantification of the target compounds was performed by multiple reaction monitoring applying electrospray ionization in either the positive mode for the diaminometabolites of TNT or the negative mode for all other compounds. An extensive method validation was performed and limits of quantification were obtained for the explosives in preconcentrated lake water samples from 0.03 to 1 ng l(-1) and 0.1 to 5 ng l(-1) in river water. Direct injection analysis revealed comparable results to preconcentrated water samples for the most persistent explosives. Analysis of lake water samples collected at different depths showed the presence of HMX, RDX and PETN at concentrations from 0.1 to 0.4 ng l(-1). The analysis of main tributaries revealed concentrations from 0.1 to 0.9 ng l(-1) of the same compounds. They seem to be responsible for the contamination of the explosives in the lakes.     

Dissolution kinetics of sub-millimeter Composition B detonation residues: role of particle size and particle wetting

The dissolution of the 2,4,6-trinitrotoluene (TNT), hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) from microscale particles (<250 μm) of the explosive formulation Composition B was examined and compared to dissolution from macroscopic particles (>0.5 mm). The dissolution of explosives from detonation soot was also examined. The measured mass transfer coefficients for the microscale particles were one to two orders of magnitude greater than the macroscopic particles. When normalized to particle surface area, mass transfer coefficients of microscale and macroscale particles were similar, indicating that the bulk dissolution processes were similar throughout the examined size range. However, an inverse relationship was observed between the particle diameter and the RDX:TNT mass transfer rate coefficient ratio for dry-attritted particles, which suggests that RDX may be more readily dissolved (relative to TNT) in microscale particles compared to macroscale particles. Aqueous weathering of larger Composition B residues generated particles that possessed mass transfer coefficients that were on the order of 5- to 20-fold higher than dry-attritted particles of all sizes, even when normalized to particle surface area. These aqueous weathered particles also possessed a fourfold lower absolute zeta-potential than dry-attritted particles, which is indicative that they were less hydrophobic (and hence, more wettable) than dry-attritted particles. The increased wettability of these particles provides a plausible explanation for the observed enhanced dissolution. The wetting history and the processes by which particles are produced (e.g., dry physical attrition vs. aqueous weathering) of Composition B residues should be considered when calculating mass transfer rates for fate and transport modeling.     

A morphological investigation of soot produced by the detonation of munitions

The morphology of three different detonation soot samples along with other common soot materials such as carbon black, diesel soot and chimney soot was studied by elemental and proximate analysis, X-ray diffraction and electron microscopy. The goal of this study was to better define the morphology of the detonation soot in order to better assess the interactions of this type of soot with explosive residues. The detonation soot samples were obtained by the detonation of artillery 155mm projectiles filled with either pure TNT (2,4,6-trinitrotoluene) or composition B, a military explosive based on a mixture of TNT and RDX (trimethylentrinitramine). The carbon content of the soot samples varied considerably depending on the feedstock composition. Detonation soot contains less carbon and more nitrogen than the other carbonaceous samples studied, due to the molecular structure of the energetic materials detonated such as TNT and RDX. The ash concentration was higher for detonation soot samples due to the high metal content coming from the projectiles shell and to the soil contamination which occurred during the detonation. By X-ray diffraction, diamond and graphite were found to be the major crystalline carbon forms in the detonation soot. Two electron microscopy techniques were used in this study to visualise the primary particles and to try to explain the formation mechanism of detonation soot samples.     

High uptake of 2,4,6-trinitrotoluene by vetiver grass--potential for phytoremediation?

2,4,6-Trinitrotoluene (TNT) is a potent mutagen, and a Group C human carcinogen that has been widely used to produce munitions and explosives. Vast areas that have been previously used as ranges, munition burning, and open detonation sites are heavily contaminated with TNT. Conventional remediation activities in such sites are expensive and damaging to the ecosystem. Phytoremediation offers a cost-effective, environment-friendly solution, utilizing plants to extract TNT from contaminated soil. We investigated the potential use of vetiver grass (Vetiveria zizanioides) to effectively remove TNT from contaminated solutions. Vetiver grass plants were grown in hydroponic systems containing 40 mg TNTL(-1) for 8d. Aqueous concentrations of TNT reached the method detection limit ( approximately 1 microg L(-1)) within the 8-d period, demonstrating high affinity of vetiver for TNT, without any visible toxic effects. Results from this preliminary hydroponic study are encouraging, but in need of verification using TNT-contaminated soils.     

Dissolution kinetics of high explosives particles in a saturated sandy soil

Solid phase high explosive (HE) residues from munitions detonation may be a persistent source of soil and groundwater contamination at military training ranges. Saturated soil column tests were conducted to observe the dissolution behavior of individual components (RDX, HMX, and TNT) from two HE formulations (Comp B and C4). HE particles dissolved readily, with higher velocities yielding higher dissolution rates, higher mass transfer coefficients, and lower effluent concentrations. Effluent concentrations were below solubility limits for all components at superficial velocities of 10-50 cm day(-1). Under continuous flow at 50 cm day(-1), RDX dissolution rates from Comp B and C4 were 34.6 and 97.6 microg h(-1) cm(-2) (based on initial RDX surface area), respectively, significantly lower than previously reported dissolution rates. Cycling between flow and no-flow conditions had a small effect on the dissolution rates and effluent concentrations; however, TNT dissolution from Comp B was enhanced under intermittent-flow conditions. A model that includes advection, dispersion, and film transfer resistance was developed to estimate the steady-state effluent concentrations.     

Degradation of explosives-related compounds using nickel catalysts

We report the ability of nickel-based catalysts to degrade explosives compounds in aqueous solution. Several nickel catalysts completely degraded the explosives, although rates varied. Nearly all of the organic explosive compounds tested, including 2,4,6-trinitrotoluene (TNT), hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), were rapidly degraded to below detection limits by a powdered nickel on an alumina-silicate support (Aldrich nickel catalyst). Perchlorate degradation was minimal (<25%). Degradation of TNT by Aldrich nickel catalyst resulted in apparent first-order kinetics. Significant gaseous 14C was released and collected in an alkaline solution (most likely carbon dioxide) from [14C]RDX and [14C]HMX, indicating heterocyclic ring cleavage. Significant gaseous 14C was not produced from [14C]TNT, but spectrophotometric evidence indicated loss of aromaticity. Degradation occurred in low ionic strength solutions, groundwater, and from pH 3 to pH 9. Degradation of TNT, RDX, and HMX was maintained in flow-through columns of Aldrich nickel catalyst mixed with sand down to a hydraulic retention time of 4h. These data indicate that nickel-based catalysts may be an effective means for remediation of energetics-contaminated groundwater.     

Effects of particulate explosives on estimating contamination at a historical explosives testing area.

A historical explosives testing area harbored contamination as unevenly distributed solid particles within a contaminant-stained soil matrix. Particles larger than 3 mm diameter accounted for 96.4% of the explosives contamination. Independent sampling and analysis methods showed significant differences in contaminant estimations due to particulate explosives. We present a solvent-based sample averaging method designed to solve spatial heterogeneity problems resulting from the presence of contaminant particles.     

UV-VIS spectroscopy of 2,4,6-trinitrotoluene-hydroxide reaction

Contamination of groundwater, surface water and soil by explosives has occurred at military sites throughout the world as a result of manufacture of explosive compounds, assembly of munitions, and deployment of explosives containing devices. Due to the adverse effects of explosives on humans and other natural receptors, a low cost means of decontaminating these areas of contamination is needed. Base-induced transformation of explosives has shown promise as a rapid, low cost, and minimally resource-intensive technology for detoxifying explosives in soil and water. In order to understand the reaction mechanism, a reaction mixture of 2:1:1 (water:2,4,6-trinitrotoluene (TNT):1 N KOH) was analyzed by UV/VIS spectrometry from 190 to 1,100 nm. Time course measurements were conducted at 25, 20, 15, and 12 degrees C. A factor analysis program was used to analyze the spectral data. Principal component analysis indicated that six principal components explained the spectra to within experimental error, with four factors explaining the majority of the variance. Test spectral vectors for four components were developed, including TNT, two intermediates, and the final product, and were tested against the abstract vectors. Two possible reaction mechanisms were suggested and tested to explain the spectral data.     

Short term exposure to elevated trinitrotoluene concentrations induced structural and functional changes in the soil bacterial community

We investigated the acute impact of trinitrotoluene (TNT) contamination of soil on the aerobic bacterial community composition and function. The contamination of the environment with explosive residues presents a serious problem at sites across the world, with the highly toxic compound TNT being the most widespread explosive contaminant. We investigated the acute impact of trinitrotoluene (TNT) contamination of soil on the aerobic bacterial community composition and function. Soil microcosms were amended with a range of concentrations of TNT for 30 days. A polyphasic approach encompassing culture-independent molecular analysis by DGGE, community-level physiological profiling (CLPP) and cell enumeration revealed that the amendment of soils with TNT resulted in a shift from slower growing k-strategists towards faster growing r-strategists. Pseudomonads became prevalent at high concentrations of TNT. Pollution induced community tolerance (PICT) was observed as TNT concentrations increased. Chemical analyses revealed that TNT was reduced to its amino derivatives, products of reductive microbial transformation. The transformation to amino derivatives decreased at high concentrations of TNT, indicative of inhibition of microbial TNT transformation.     

Dissolution rates of three high explosive compounds: TNT,RDX, and HMX

Incidental exposure to high explosive compounds can cause subtle health effects to which a population could be more susceptible than injury by detonation. Proper source characterization is a key requirement in the conduct of risk assessments. For nonvolatile solid explosives, dissolution is one of the primary mechanisms that controls fate and transport, resulting in exposure to these compounds remote from their source. To date, information describing dissolution rates of high explosives has been sparse. The objective of this study was to determine the dissolution rates of three high explosive compounds, 2,4,6-trinitrotoluene (TNT), hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), in dilute aqueous solutions as a function of temperature, surface area, and energy input. To determine each variable's impact on dissolution rate, experiments were performed where one variable was changed while the other two were held constant. TNT demonstrated the fastest dissolution rate followed by HMX and then RDX. Dissolution rate correlation equations were developed for each explosive compound incorporating the three aforementioned variables, independently, and collectively in one correlation equation.     

Environmental behavior of explosives in groundwater from the Milan Army Ammunition Plant in aquatic and wetland plant treatments. Removal, mass balances and fate in groundwater of TNT and RDX.

Phytoremediation of 2,4,6-trinitrotoluene (TNT) and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) in groundwater using constructed wetlands is a potentially economical remediation alternative. To evaluate Explosives removal and fate was evaluated using hydroponic batch incubations of plant and substrate treatments with explosives-contaminated groundwater amended with [U-14C]-TNT or [U-14C]-RDX. Plants and substrates were collected from a small-scale wetland constructed for explosives removal, and groundwater originated from a local aquifer at the Milan Army Ammunition Plant. The study surveyed three aquatic, four wetland plant species and two substrates in independent incubations of 7 days with TNT and 13 days with RDX. Parent compounds and transformation products were followed using 14C and chemical (HPLC) analyses. Mass balance of water, plants, substrates and air was determined. It was demonstrated that TNT disappeared completely from groundwater incubated with plants, although growth of most plants except parrot-feather was low in groundwater amended to contain 1.6 to 3.4 mg TNT L-1. Highest specific removal rates were found in submersed plants in water star-grass and in all emergent plants except wool-grass. TNT declined less with substrates, and least in controls without plants. Radiolabel was present in all plants after incubation. Mineralization to 14CO2 was very low, and evolution into 14C-volatile organics negligible. RDX disappeared less rapidly than TNT from groundwater. Growth of submersed plants was normal, but that of emergent plants reduced in groundwater amended to contain 1.5 mg RDX L-1. Highest specific RDX removal rates were found in submersed plants in elodea, and in emergent plants in reed canary grass. RDX failed to disappear with substrates. Mineralization to 14CO2 was low, but relatively higher than in the TNT experiment. Evolution into 14C-volatile organics was negligible. Important considerations for using certain aquatic and wetland plants in constructed wetlands aimed at removing explosives from water are: (1) plant persistence at the explosives level to which it is exposed, (2) specific plant-mass based explosives removal rates, (3) plant productivity, and (4) fate of parent compounds and transformation products in water, plants, and sediments.     

Environmental behavior of explosives in groundwater from the Milan Army Ammunition Plant in aquatic and wetland plant treatments. Uptake and fate of TNT and RDX in plants

Uptake and fate of TNT and RDX by three aquatic and four wetland plants were studied using hydroponic, batch, incubations in explosives-contaminated groundwater amended with [U-14C]-TNT or [U-14C]-RDX in the laboratory. Substrates in which the plants were rooted were also tested. Plants and substrates were collected from a small-scale wetland constructed for explosives removal, and groundwater originated from a local aquifer at the Milan Army Ammunition Plant. This study demonstrated rapid uptake of [U-14C]-TNT derived 14C, concentration at the uptake sites and limited transport in all plants. Per unit of mass, uptake was higher in submersed than in emergent species. Biotransformation of TNT had occurred in all plant treatments after 7-day incubation in 1.6 to 3.4 mg TNT L-i, with labeled amino-dinitrotoluenes (ADNTs), three unidentified compounds unique for plants, and mostly polar products as results. Biotransformation occurred also in the substrates, yielding labeled ADNT, one unidentified compound unique for substrates, and polar products. TNT was not recovered by HPLC in plants and substrates after incubation. Uptake of [U-14C]-RDX derived 14C in plants was slower than that of TNT, transport was substantial, and concentration occurred at sites where new plant material was synthesized. As for TNT, uptake per unit of mass was higher in submersed than in emergent species. Biotransformation of RDX had occurred in all plant treatments after 13-day incubation in 1.5 mg RDX L-1, with one unidentified compound unique for plants, and mostly polar products as results. Biotransformation had occurred also in the substrates, but to a far lower extent than in plants. Substrates and plants had one unidentified 14C-RDX metabolite in common. HPLC analysis confirmed the presence of RDX in most plants and in three out of four substrates at the end of the incubation period.     

Water-soluble ions in nano/ultrafine/fine/coarse particles collected near a busy road and at a rural site

This study investigated water-soluble ions in the sized particles (particularly nano (PM(0.01-0.056))/ultrafine (PM(0.01-0.1))) collected using MOUDI and Nano-MOUDI samplers near a busy road site and at a rural site. The analytical results demonstrate that nano and coarse particles exhibited the highest (16.3%) and lowest (8.37%) nitrate mass ratios, respectively. The mass ratio of NO(3)(-) was higher than that of SO(4)(2-) in all the sized particles at the traffic site. The secondary aerosols all displayed trimodal distributions. The aerosols in ultrafine particles collected at the roadside site exhibited Aitken mode distributions indicating they were of local origin. This finding was not observed for those ultrafine particles collected at the rural site. The mass median diameters (MMDs) of the nano, ultrafine, and fine particles were smaller at the traffic site than at the rural site, possibly related to the contribution of mobile engine emissions.     

Dissolution and sorption of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) and 2,4,6-trinitrotoluene (TNT) residues from detonated mineral surfaces

Composition B (Comp B) is a commonly used military formulation composed of the toxic explosive compounds 2,4,6-trinitrotoluene (TNT), and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). Numerous studies of the temporal fate of explosive compounds in soils, surface water and laboratory batch reactors have been conducted. However, most of these investigations relied on the application of explosive compounds to the media via aqueous addition and thus these studies do not provide information on the real world loading of explosive residues during detonation events. To address this we investigated the dissolution and sorption of TNT and RDX from Comp B residues loaded to pure mineral phases through controlled detonation. Mineral phases included nontronite, vermiculite, biotite and Ottawa sand (quartz with minor calcite). High Performance Liquid Chromatography and Attenuated Total Reflectance Fourier Transform Infrared spectroscopy were used to investigate the dissolution and sorption of TNT and RDX residues loaded onto the mineral surfaces. Detonation resulted in heterogeneous loading of TNT and RDX onto the mineral surfaces. Explosive compound residues dissolved rapidly (within 9 h) in all samples but maximum concentrations for TNT and RDX were not consistent over time due to precipitation from solution, sorption onto mineral surfaces, and/or chemical reactions between explosive compounds and mineral surfaces. We provide a conceptual model of the physical and chemical processes governing the fate of explosive compound residues in soil minerals controlled by sorption-desorption processes.     

Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing

Emission factors (EFs) of particulate matter with aerodynamic diameter ≤10 µm (PM₁₀) from the open burning/open detonation (OB/OD) of energetic materials were measured using a hybrid-optical remote sensing (hybrid-ORS) method. This method is based on the measurement of range-resolved PM backscattering values with a micropulse light detection and ranging (LIDAR; MPL) device. Field measurements were completed during March 2010 at Tooele Army Depot, Utah, which is an arid continental site. PM₁₀ EFs were quantified for OB of M1 propellant and OD of 2,4,6-trinitrotoluene (TNT). EFs from this study are compared with previous OB/OD measurements reported in the literature that have been determined with point measurements either in enclosed or ambient environments, and with concurrent airborne point measurements. PM₁₀ mass EFs, determined with the hybrid-ORS method, were 7.8?×?10^?3 kg PM₁₀/kg M1 from OB of M1 propellant, and 0.20 kg PM₁₀/kg TNT from OD of TNT. Compared with previous results reported in the literature, the hybrid-ORS method EFs were 13% larger for OB and 174% larger for OD. Compared with the concurrent airborne measurements, EF values from the hybrid-ORS method were 37% larger for OB and 54% larger for OD. For TNT, no statistically significant differences were observed for the EFs measured during the detonation of 22.7 and 45.4 kg of TNT, supporting that the total amount of detonated mass in this mass range does not have an effect on the EFs for OD of TNT.

Implications: Particulate matter (PM) in the atmosphere affects the health of humans and ecosystems, visibility, and climate. Fugitive PM emissions are not well characterized because of spatial and temporal ubiquity and heterogeneity. The hybrid-ORS method is appropriate for quantifying fugitive PM emission factors (EFs) because it captures the spatial and temporal dispersion of ground level and elevated plumes in real time, without requiring numerous point measurement devices. The method can be applied to provide an opportunity to reduce the uncertainty of fugitive PM EFs and readily update PM emissions in National Emission Inventories for a range of fugitive PM sources.     

Size distribution of polycyclic aromatic hydrocarbons in a roadway tunnel in Lisbon, Portugal

Atmospheric aerosols of four aerodynamic size ranges were collected using high volume cascade impactors in an extremely busy roadway tunnel in Lisbon (Portugal). Dust deposited on the tunnel walls and guardrails was also collected. Average particle mass concentrations in the tunnel atmosphere were more than 30 times higher than in the outside urban background air, revealing its origins almost exclusively from fresh vehicle emissions. Most of the aerosol mass was concentrated in submicrometer fractions (65%), and polycyclic aromatic hydrocarbons (PAH) were even more concentrated in the finer particles with an average of 84% of total PAH present in sizes smaller than 0.49 μm. The most abundant PAH were methylated phenanthrenes, fluoranthene and pyrene. About 46% of the total PAH mass was attributed to lower molecular weight compounds (two and three rings), suggesting a strong influence of diesel vehicle emissions on the production of local particulate PAH. The application of diagnostic ratios confirmed the relevance of this source of PAH in the tunnel ambient air. Deposited dust presented PAH profiles similar to the coarser aerosol size range, in agreement with the predominant origin of coarser aerosol particles from soil dust resuspension and vehicle wear products.     

Presence of plutonium contamination in soils from Palomares (Spain)

More than 30 years after the occurrence of an aircraft accident which involved the detonation of two nuclear weapons in the surrounding area of the village of Palomares (Spain), the affected terrestrial area has been investigated for remaining transuranic contamination. Evidence from the presence of this contamination was initially found through the analysis of the 241Am inventories in superficial soil samples collected in the region, and was confirmed through the analysis of the (239+240)Pu inventories and their associated 238Pu/(239+240)Pu activity ratios in the same samples. However, it was also observed that a considerable fraction of the remaining contamination in the area was present in particulate form, i.e. as "hot particles". The work performed in our laboratory for identification, isolation and characterisation of these "hot particles" as well as some conclusions obtained from these analyses are outlined in this paper.