纳滤处理含Cr(VI)废水的试验研究

采用纳滤对含Cr(Ⅵ)废水进行试验研究,讨论了初始浓度、pH、浓差极化、共存离子对处理效果的影响.试验结果表明,NF90膜对含Cr(Ⅵ)废水有良好的处理效果,去除率超过了98%,出水Cr(Ⅵ)浓度低于0.5 mg/L,可以达标排放或回用于镀件漂洗.     

Bioadsorption and bioaccumulation of chromium trivalent in Cr(III)-tolerant microalgae: A mechanisms for chromium resistance

Anthropogenic activity constantly releases heavy metals into the environment. The heavy metal chromium has a wide industrial use and exists in two stable oxidation states: trivalent and hexavalent. While hexavalent chromium uptake in plant cells has been reported that an active process by carrying essential anions, the cation Cr(III) appears to be taken up inactively. Dictyosphaerium chlorelloides (Dc1M), an unicellular green alga is a well-studied cell biological model organism. The present study was carried out to investigate the toxic effect of chromium exposures on wild-type Cr(III)-sensitive (Dc1M^wt) and Cr(III)-tolerant (Dc1M^Cr(III)R30) strains of these green algae, and to determine the potential mechanism of chromium resistance. Using cell growth as endpoint to determine Cr(III)-sensitivity, the IC₅₀₍₇₂₎ values obtained show significant differences of sensitivity between wild type and Cr(III)-tolerant cells. Scanning electron microscopy (SEM) showed significant morphological differences between both strains, such as decrease in cell size or reducing the coefficient of form; and transmission electron microscopy (TEM) revealed ultrastructural changes such as increased vacuolization and cell wall thickening in the Cr(III)-tolerant strain with respect to the wild-type strain. Energy dispersive X-ray analysis (SEM/XEDS) revealed that Cr(III)-tolerant D. chlorelloides cells are able to accumulate considerable amounts of chromium distributed in cell wall (bioadsorption) as well as in cytoplasm, vacuoles, and chloroplast (bio-accumulation). Morphological changes of Cr(III)-tolerant D. chlorelloides cells and the presence of these electron-dense bodies in their cell structures can be understood as a Cr(III) detoxification mechanism.     

Acute and chronic activity of perchlorate and hexavalent chromium contamination on the survival and development of Culex quinquefasciatus Say (Diptera: Culicidae)

Effects of water contamination with perchlorate and hexavalent chromium [Cr (VI)] on the mosquito Culex quinquefasciatus were assessed. The chronic (10-day) LC50s values for perchlorate and chromium were 74+/-8.0 mg/L and 0.41+/-0.15 mg/L, respectively. Relative Growth Index, a measure of growth and mortality rates in a population, was significantly reduced within 5 days for levels of perchlorate as low as 25 mg/L and for levels of chromium as low as 0.16 mg/L. Neither compound altered wing length of surviving adults. In combination, contaminants were synergistic, causing 14% more mortality than predicted. Acute (24-h) LC50 values for perchlorate and Cr (VI) were 17,000+/-3200 and 38+/-1.3 mg/L, respectively. Effects on mosquito larvae in contaminated environments are likely to be observed for Cr (VI) but not for perchlorate, which generally does not occur at levels as high as those shown here to affect larval mosquitoes.     

Efficient biosorption of chromium(VI) ion by dry Araucaria leaves

Background

In this paper, batch removal of hexavalent chromium from aqueous solutions by Araucaria heterophylla leaves was investigated. The batch experiments were conducted to study the adsorption of metal species and effect of different pH, contact time, metal concentration, biosorbent concentration, and adsorption capacity.

Method

Freundlich and Langmuir??s isotherm model were used to describe the adsorption behavior, and the experimental results fitted Freundlich model well.

Results

The adsorption efficiency observed for all chromium concentrations, i.e., 1, 3, 5, and 10?mg/L was 100% and the equilibrium was achieved in 30?min for 1 and 3?mg/L, whereas for 5 and 10?mg/L, it was less than 60?min. FTIR spectra was taken to identify functional groups involved in the biosorption.

Conclusion

Thus, Araucaria leaves can be considered as one of the cheap and efficient biosorbent for toxic hexavalent chromium removal from natural or wastewaters.     

pH和有机质对铬渣污染土壤中Cr赋存形态的影响

选用3种不同的铬渣污染土壤作为试验样,通过调节其pH和有机质含量,并采用碱消解-共沉淀法和改良BCR顺序提取法,研究了pH和有机质含量对土壤中铬的价态及形态的影响。结果表明,总体上Cr(Ⅵ)含量随pH降低和有机质投加量增大而减小,Cr(Ⅲ)则增加,但土1各水平间差异均显著(F8.89),土2和土3只有部分水平间差异显著。同时,随pH降低和有机质投加量增大,酸可提取态Cr含量减小,可氧化态Cr增加,可还原态略有增加,表明酸性条件和有机质有利于Cr(Ⅵ)的还原和酸可提取态Cr向可还原态和可氧化态Cr的转化。     

Size and Concentration Measurements of Particles Produced in Commercial Chromium Plating Processes

Abstract

Optical measurements of particle size and concentration were made at the chromium plating tank and exhaust system at a commercial hexavalent chromium plating facility. Particles were examined at three locations in the exhaust system: 1) directly at the hexavalent chromium plating bath surface, 2) at the exit of a cyclone separator located in the exhaust system approximately three to four meters downstream of the bath, and 3) in the exhaust stack, downstream of the induced draft fan and all abatement devices. Particle diameters at the bath surface ranged from 0.3 to 25 μm. Downstream of the cyclone exit and mesh pad filters, particle top sizes were approximately 5 and 0.7 mm, respectively. On a mass basis, the collection efficiency of all abatement devices was 99.997%. Assuming that droplets in the flow consist primarily of water and chromium, correcting the total particle mass flow against water content gives a chromium emission rate of 64,000 μg/hr, which compares favorably with a value of 77,000 μg/hr measured with EPA methods. This initial agreement, which should be validated through additional measurements over a broad range of flow conditions, raises the possibility of continuous monitoring for chromium metal emissions using particle size/mass as a surrogate.     

Soil humic acids may favour the persistence of hexavalent chromium in soil

The interaction between hexavalent chromium Cr(VI), as K₂CrO₄, and standard humic acids (HAs) in bulk solution was studied using three complementary analytical methods: UV-Visible spectroscopy, X-ray absorption spectroscopy and differential pulse stripping voltammetry. The observed UV-Vis and X-ray absorption spectra showed that, under our experimental conditions, HAs did not induce reduction of Cr(VI) to its trivalent chemical form. The interaction between Cr(VI) and HAs has rather led to the formation of Cr(VI)-HAs micelles via supramolecular chemical processes. The reported results could contribute towards explaining the relative persistence of ecotoxic hexavalent chromium in soils.     

Phenotypic plasticity in Scenedesmus incrassatulus (Chlorophyceae) in response to heavy metals stress

The microalgae genus Scenedesmus is commonly found in freshwater bodies, wastewater facilities and water polluted with heavy metals. Phenotypic plasticity in Scenedesmus has been documented in response to a wide variety of conditions; however, heavy metals have not been comprehensively documented as phenotypic plasticity inducers. In this study, we report the phenotypic plasticity of Scenedesmus incrassatulus (a non-spiny, four-cell coenobium forming species) in response to EC₅₀ value of copper, cadmium and hexavalent chromium. S. incrassatulus was grown in batch cultures in the presence of each metal. Chlorophyll-a content, cell size, parameters derived from the schematic energy-flux model for photosystem II, and morphotype expressions were recorded. Divalent cation metals induced unicellular forms, and hexavalent chromium produced out-of-shape coenobia corresponding to various stages of autospore formation. The changes induced by divalent metals were interpreted as phenotypic plasticity, because they were always associated to population doublings and were reversible when toxicant pressure was removed (only for Cu). Copper was the best inductor of unicellular forms and also affected significantly all the photosynthetic parameters measured. The developed morphotypes could confer ecological advantages to S. incrassatulus in metal stressed environments.     

Potassium dichromate increases the micronucleus frequency in the crayfish Procambarus clarkii

The assessment of biological effects on aquatic vertebrate and invertebrate species is frequently employed to monitor water pollution because it provides meaningful information on bioavailability and effective concentration levels. Of special concern are genotoxic agents that induce DNA alterations at subtoxic exposure levels. With the objective of developing a field-assay for the detection of genotoxic pollutants in water, we investigated the effects of hexavalent chromium in the haemolymph cells of Procambarus clarkii using the micronuclei (MN) test. The frequency of micronucleated cells significantly correlated with the amount of potassium dichromate in water and with the amount of chromium found in gills.     

Immobilised microbial reactor for the biotransformation of hexavalent chromium

Out of an array of bacterial strains isolated from soil contaminated with effluents from electroplating wastewater, Bacillus coagulans exhibited the maximum Cr(VI) reduction potential. The feasibility of an immobilized B. coagulans bioreactor for hexavalent chromium reduction was investigated. Experimental results demonstrated that near complete removal of Cr(VI) was achieved in the reactor with an initial Cr(VI) concentration of 26 mg/l and reactor time of 24 h. The removal efficiency in the bioreactor was significantly affected by the influent Cr(VI) concentration, the Cr(VI) loading rate, the reaction time and the amount of Cr(VI) reduced by the biomass.     

Spectrophotometric determination of sulphur dioxide

Sulphur dioxide, an important industrial gas and air pollutant, is usually estimated using mercury salts. The authors have developed a method in which hazardous mercury salts are avoided. Sulphur dioxide is trapped in aqueous morpholine and mixed with the excess of dichromate solution in acidic medium. The hexavalent chromium in dichromate is reduced to trivalent chromium by sulphur dioxide and the excess of hexavalent chromium is determined with diphenylcarbazide which yields a soluble red-violet complex with an absorption maximum at 540 nm. The decrease in the absorbance values of the red-violet complex formed after reduction, when compared to that of a reagent control, is proportional to the concentration of sulphur dioxide used for reduction. Beer's law operates between 0.4 and 4 microg ml(-1) concentration of sulphur dioxide in solution.     

Copper toxicity to Lemna minor modelled using humic acid as a surrogate for the plant root

Humic acids are chemically analogous to plant root cell walls in that their surface sites are principally comprised of carboxylic and phenolic acids which bind both metals and protons. Based on this analogy, we developed a biotic-ligand type of model to predict Cu toxicity to Lemna minor, using particulate humic acid (HA(part)) of the Windermere Humic Aqueous Model (WHAM), and 7d static-renewal exposures with five surface waters and one nutrient media which varied in DOC (1-10 mg L(-1)), pH (6.9-8.7), and water hardness (35-236 mg equivalent CaCO(3)L(-1)). Although the range of waters tested resulted in a 36-fold variation in 50% inhibitory concentration (IC50) values, the calculated concentration of Cu bound to HA(part) using this framework was highly correlated with pooled percent net root elongation (%NRE) (R(2)=0.95). Ten and fifty percent IC values based on [Cu-HA(part)] were additionally within a factor of ±1.5 and ±1.4, respectively, inclusive of 95% confidence limits. This model construct, which defines the free metal ion and the first hydrolysis product (but not metal carbonate complexes) as being bioavailable, provides an alternative means of defining the binding surface in bioavailability models, whereby a heterogeneous mixture of ligands collectively influence root-metal sorption and toxicity.     

Natural and anthropogenic influences on heavy metals in airborne particles over the Korean Peninsula

Six monitoring stations were selected to characterize the variations in airborne concentrations of heavy metals in South Korea between 1999 and 2012. Three stations represented higher concentrations, and three represented lower concentrations. The heavy metals monitored at these stations include cadmium, chromium, copper, iron (Fe), lead, manganese (Mn), and nickel. During the study period, concentrations of heavy metals at many stations, including those around the Seoul metropolitan area, showed a decreasing trend. However, concentrations of Mn and Fe that are primarily of crustal origin increased at four of the six stations. Some stations were significantly affected by emissions from the local industrial complex (IC), and heavy metal concentrations at those stations were relatively high even in summer. Many heavy metal concentrations were higher in spring than in winter, but wintertime concentrations of Cr and Pb were higher at the stations representing lower concentrations due to the dominant influence of combustion emissions. At stations less affected by emissions from the IC, concentrations of Fe and Mn that are predominantly crustal in origin were higher in spring, when Asian dust (AD) events are most frequent. Although Mn concentrations were also high at stations within the steelmaking IC during AD periods, they were much higher during non-AD periods due to local emissions. Variations in heavy metal concentrations, which are heavily influenced by emissions from the IC, warrant individual analysis because their emission characteristics differ from those of typical cases.     

Metal concentrations in water,sediment and gudgeon (Gobio gobio) from a pollution gradient: relationship with fish condition factor

This study assesses the applicability of a sentinel fish species as a biomonitor of metal pollution. Gudgeon (Gobio gobio) were collected from 14 sites in metal polluted lowland rivers in Flanders, including a clear Cd and Zn pollution gradient. Fish tissues were analysed for Cd, Cr, Cu, Ni, Pb and Zn. Metal levels in organs were related to levels in water and sediment. At some sites Cd and Zn levels were up to 50 times higher compared to reference values and literature. Significant relationships between Cd and Zn in fish tissue and environmental levels were found, especially in the pollution gradient where up to 70% of the observed variation could be described. Condition factor differed significantly among the sampling sites but could not be directly related to the environmental metal levels. Nevertheless, in the pollution gradient, threshold tissue concentrations could be defined above which the condition factor was always low.     

Antioxidative responses in relation to growth of mustard (Brassica juncea cv. Pusa Jaikisan) plants exposed to hexavalent chromium

Effect of hexavalent chromium (Cr6+) was seen on Brassica juncea cv. Pusa Jaikisan grown for 15 days in hydroponic culture supplemented with 0.2, 2 and 20 microM Cr. The inhibitory response of Cr6+ on growth of B. juncea was concentration and time dependent. The stimulation of plant growth, observed in response to exposure to 0.2 microM Cr6+, during initial 5 days was reversed on prolonged treatment and at higher Cr6+ concentrations (2 and 20 microM Cr6+). Despite reduction in growth, chlorophyll content increased substantially on 15 days exposure to 20 microM Cr6+. Significant increases in lipid peroxidation and tissue concentration of H2O2 occurred in plants exposed to 2 and 20 microM Cr6+. Effect of Cr6+ on antioxidative enzymes in roots and leaves was differential. SOD and CAT activities at lower levels of Cr6+ supply remained higher all through the treatment. While APX was very susceptible to excess Cr6+, GR and GST increased at elevated levels of Cr6+. The results suggested Cr6+ induced depression in plant growth of B. juncea to be a function of increased cellular accumulation of Cr despite increase in the activities of some of the antioxidative enzymes.     

Distribution, origin and fate of chromium in soils in Guanajuato, Mexico

Total, hexavalent and trivalent chromium were determined in surface and 30-cm depth soil samples from a highly chromium-polluted area in Guanajuato state, central México. Four samples were also analyzed by a sequential extraction procedure. Nearly 0.9 km(2) out of the 8 km(2) area sampled was polluted with chromium, at concentrations up to 12960 mg kg(-1), mostly as Cr(III). Concentrations of Cr(VI) were lower than 0.5 mg kg(-1) in most sampled points, with the exception of one, where the concentration was found to be 65.14 mg kg(-1). Chromiumcontaining dust from a chromate factory accounted for most of the contamination. The highest concentrations of hexavalent chromium in soil, were in the bottom sediments of an abandoned water reservoir used to store polluted water from a well, before use of the water in the factory process. Tannery wastes, dust from a sanitary landfill of chromate compounds and the transport of chromium products are the sources of chromium at other sites. Chromium is fixed preferentially in the hydrous Fe and Mn oxides in the more polluted soils. Less polluted soils have a high proportion of chromium associated with the sulfide and organic fraction. Cr(III) is retained preferentially in the superficial soil layer. Variations in the physical characteristics of the soil, relative abundance of the various soil components and characteristics of the contaminant source, give rise to differences in chromium soil concentrations with depth.     

Removal of chromium from synthetic plating waste by zero-valent iron and sulfate-reducing bacteria.

Experiments were conducted to evaluate the potential of zero-valent iron and sulfate-reducing bacteria (SRB) for reduction and removal of chromium from synthetic electroplating waste. The zero-valent iron shows promising results as a reductant of hexavalent chromium (Cr+6) to trivalent chromium (Cr+3), capable of 100% reduction. The required iron concentration was a function of chromium concentration in the waste stream. Removal of Cr+3 by adsorption or precipitation on iron leads to complete removal of chromium from the waste and was a slower process than the reduction of Cr+6. Presence SRB in a completely mixed batch reactor inhibited the reduction of Cr+6. In a fixed-bed column reactor, SRB enhanced chromium removal and showed promising results for the treatment of wastes with low chromium concentrations. It is proposed that, for waste with high chromium concentration, zero-valent iron is an efficient reductant and can be used for reduction of Cr+6. For low chromium concentrations, a SRB augmented zero-valent iron and sand column is capable of removing chromium completely.     

Effects of sintering atmosphere on cement clinkers produced from chromium-bearing sludge

The purpose of this study was to investigate the effects of sintering atmosphere (oxidizing and reducing) on the polymorphs of dicalcium silicates (Ca2SiO4, C2S) and on the chromium leaching of the belite-rich clinkers made from a chromium-bearing sludge. This sludge was generated in an electroplating factory, and in addition to chromium, it contained nickel, copper and zinc. In the clinker production, air was used as the oxidizing atmosphere, and carbon monoxide, which was produced by burning graphite with an insufficient amount of oxygen, was employed as the reducing atmosphere. Dicalcium silicates were substantially formed under both kinds of sintering atmosphere, but there was some nonhydraulic gamma-C2S in the clinkers produced under the oxidizing atmosphere. In addition, the amount of gamma-C2S decreased with the chromium-bearing sludge addition, whereas that of beta-C2S increased. The clinkers produced under the reducing atmosphere had less residual chromium, a finding that shows that more chromium was evaporated. However, the reducing atmosphere can decrease the proportion of hexavalent chromium (Cr(VI)) in the resulting clinkers. For other heavy metals, the residual amounts of nickel and copper generally increased with the sludge addition, but zinc was absent in most of the clinkers produced under the reducing atmosphere. This implies that the evaporation of zinc is much more significant than that of the other heavy metals under a reducing atmosphere. In the leaching tests, the concentrations of nickel, copper, and zinc were below the detection limits in all the leachates. In terms of chromium, the total leaching concentration was highly related to Cr(VI). The clinkers produced under the oxidizing atmosphere had high leaching concentrations of chromium, and thus failed to meet the regulatory limit. In contrast, the reducing atmosphere was effective in decreasing the chromium leaching, and it therefore makes the resulting cement clinkers more environmentally sound.     

Near-field dispersion modeling for regulatory applications

This paper evaluates the application of dispersion models to estimate near-field pollutant concentrations in two case studies. The Industrial Source Complex Short-Term Model (ISCST3) was evaluated with hexavalent chromium measurements collected within 100 m of two facilities in Barrio Logan, San Diego, CA. ISCST3 provided reasonable estimates for higher pollutant concentrations but underestimated lower concentrations. To understand the observed distribution of concentrations in Barrio Logan, a recently conducted tracer experiment was analyzed. The tracer, sulfur hexafluoride, was released at ambient temperature from an urban facility at the University of California at Riverside, and concentrations were measured within 20 m of the source. Modeling results indicated that Industrial Source Complex-Plume Rise Model Enhancement and American Meteorological Society/U.S. Environmental Protection Agency Regulatory Model-Plume Rise Model Enhancement overestimated high concentrations and underestimated low concentrations. A diagnostic study with a simple Gaussian dispersion model that incorporated site-specific meteorology was used to evaluate model results. This study found that incorporating lateral meandering for nonbuoyant urban plumes in Gaussian dispersion models could improve concentration estimates even when downwash is not considered. Incorporating a meandering component in ISCST3 resulted in improvements in estimating hexavalent chromium concentrations in Barrio Logan. Credible near-source concentration estimates depend on accurate characterization of emissions, onsite micrometeorology, and a method to account for lateral meandering in the near field.     

Biodegradation of phenol and phenol-related compounds by psychrophilic and cold-tolerant alpine yeasts

We characterized 32 cold-adapted, psychrophilic and cold-tolerant, yeast strains isolated from alpine habitats with regard to their taxonomy, growth temperature profile, and ability to degrade phenol and 18 phenol-related mono-aromatic compounds at 10 degrees C. Twenty of the strains were identified by sequencing of the ribosomal ITS region as seven species of the basidiomycota: Cryptococcus terreus (three strains), Cryptococcus terricola (one strain), Rhodosporidium lusitaniae (two strains), Rhodotorula creatinivora (10 strains), Rhodotorula ingeniosa (one strain), Mastigobasidium intermedium (one strain), and Sporobolomyces roseus (two strains). Twelve strains sharing closely related ITS sequences could not be identified to the species level; according to their ITS sequence they are included in the Microbotryomycetidae. These 12 strains were psychrophilic (no growth at temperatures above 20 degrees C); one-third of these strains did not grow above 15 degrees C. None of the 32 strains utilized any of the highly volatile mono-aromatic compounds (benzene, toluene, ethylbenzene, nitrobenzene, o-xylene, m-xylene, and p-xylene) as the sole carbon source. Non/low volatile aromatic compounds were degraded in the following order: phenol>hydroquinone>resorcinol>benzoate>catechol>salicylate>p-cresol>m-cresol. o-Cresol, guaiacol, p-nitrophenol, or p-nitrotoluene were not utilized for growth. R. creatinivora strains degraded up to seven compounds, whereas C. terricola and S. roseus strains degraded only two compounds. The toxicity of the compounds was determined via growth inhibition in the presence of toxicants and nutrients at 10 degrees C. R. creatinivora strains were characterized by higher IC50 values than other species, S. roseus was the most sensitive species. The most toxic compounds were the xylene isomers, ethylbenzene, p-nitrophenol, and m-cresol. There was a relation between the chemical structure of the compounds and their toxicity, whereas a relation between the toxicity of the compounds and the ability of the yeasts strains to utilize these compounds for growth was only detected in some cases.