聚合氯化铝中纳米Al13电荷特性及其混凝效果

采用聚丙烯酰胺凝胶柱层析法分离纯化聚合氯化铝(PAC)中的Al₁₃形态,并采用Al-Ferron逐时络合比色法和ZATESIZER 3000HSA测定仪对分离所得纳米Al₁₃形态以及AlCl₃和PAC进行了分析表征和电荷特性的对比性研究;采用烧杯实验法对3个样品处理实际和模拟水样的混凝效果进行了对比性研究.Al-Ferron逐时络合比色法的结果表明,采用层析法分离可得到含量99%左右的纳米Al₁₃形态;电荷特性和混凝效果研究结果表明纳米Al₁₃形态较其它两者具有更好的除浊、除腐殖酸和脱色效果并且具有更强的电中和能力,因此Al₁₃形态是一种具有较高正电荷和较高的水解稳定性,在给水和废水处理中的一种较为有效的Al形态.     

Al13形态的凝胶层析分离及分离级分特性对比

采用聚丙烯酰胺凝胶柱层析法分离纯化聚合氯化铝(PAC)中的Al₁₃形态,并采用Al- Ferron逐时络合比色法、透射电镜(TEM)和ZATESIZER测定仪对分离纯化过程中所得3个级分进行了分析表征和电荷特性的研究;采用烧杯实验法对3个级分处理实际和模拟水样的混凝效果进行了对比性研究.Al- Ferron逐时络合比色法和TEM结果表明,在层析法分离中级分随着洗脱时间延长按分子的大小依次洗脱下来,因此截取中间组分即可得到含量95 %左右的纳米Al₁₃形态;电荷特性和混凝效果研究结果表明,第3个级分其他两者具有更好的除浊、除腐殖酸和脱色效果,并且具有更强的电中和能力,因此Al₁₃形态是一种具有较高正电荷和较高的水解稳定性以及宽的pH适用范围,在给水和废水处理中是一种较为有效的Al形态.     

聚合氯化铝中Alb形态去除腐殖酸的效果及机制研究

Al_b形态［Al₁₂AlO₄(OH)₂₄⁷⁺］是聚合氯化铝（polyaluminium chloride, PAC）水解-聚合作用中形成的一种粒度小、所带正电荷多、聚集程度高及分子量大的多核羟基配合物.本试验采用乙醇-丙酮混合沉淀法分离PAC溶液中各种铝形态,提纯出Al_b形态（Al_b絮凝剂）.研究投加量、pH及无机离子对Al_b絮凝剂处理腐殖酸模拟水样絮凝效果的影响,并利用光散射颗粒分析仪（PDA2000）测定Al_b絮凝剂对腐殖酸絮凝过程中絮体的形成与增长过程的动态变化,结合絮体的Zeta电位,对Al_b絮凝剂的絮凝机制进行了初步探讨.结果表明,当投加量为4.3～6.3 mg/L、pH值为3.0～6.0时,Al_b絮凝剂处理腐殖酸模拟水样达到最佳絮凝效果;NH⁺₄、SiO^2-₃、H₂PO^-₄的存在明显抑制其絮凝性能.絮凝动力学过程和絮体Zeta电位表明,Al_b絮凝剂在水处理中主要是通过电中和作用和吸附网捕卷扫作用共同起絮凝作用的.     

Efficient purification of Al30 by organic complexation method

A method was developed for preparing high purity Al₃₀O₈(OH)₅₆(H₂O)₂₄^18 + (Al₃₀) through elimination of impurities by complexation. Polyaluminum chloride II (PAC₃₀) with Al_c content of 75% was adopted as the source of Al₃₀. The PAC₃₀ was prepared under conditions of total aluminum concentration 0.1?mol/L and OH^?/Al ratio 2.2 to obtain the highest content of Al₃₀. A precipitation/metathesis method, organic solvent precipitation method and organic complexation method were examined to separate and purify Al₃₀. It was found that only by the organic complexation method could high purity Al₃₀ products be obtained in large yield economically. In the experiments, benzoic acid was used as the coordinating reagent to decompose the main impurity AlO₄Al₁₂(OH)₂₄(H₂O)₁₂^7 + (Al₁₃), and the Al₃₀ product could be obtained by precipitation and metathesis operations. It was noteworthy that the decomposition of impurities by benzoic acid could be completed in 2?hr. The Al₃₀ product was characterized by Ferron assay, ²⁷Al-NMR, SEM, XRD and TGA. The results showed that the purity of the Al₃₀ product could exceed 92%.     

聚合氯化铝中Al_(13)形态水解稳定性的研究

采用聚丙烯酰胺凝胶柱层析法分离纯化聚合氯化铝(PAC)中的Al13形态,并采用Al-Ferron逐时络合比色法对比研究了Al13形态、PAC和Al13三种样品水解稳定性。研究结果表明Al13形态无论是对于稀释倍数、介质的pH值和水解时间都具有较高的水解稳定性,是给水和废水处理中的一种较为有效的Al形态。     

羟基聚合氯化铝铁溶液的形态转化规律

采用改进的 Al-Fe-Ferron逐时络合比色法和酸滴定实验研究了典型羟基聚合铝铁(n_Al/n_Fe=9∶1,5∶5)溶液的形态转化 .结果表明 ,羟基聚合铝铁的形态转化主要由 n_Al/n_Fe值、碱化度和熟化等因素决定 ;羟基聚合铝铁的形态转化特征是优势形态之间的转变 ;当n_Al/n_Fe>5∶5,随碱化度的升高 ,[Al+Fe]_a和 [Al+Fe]_b 2类形态逐渐占优势 ;随n_Al/n_Fe值的减小 ,[Al+Fe]_a和 [Al+Fe]_c增加 ,而 [Al+Fe]_b 减少 .讨论了羟基聚合铝铁的形态转化规律 .     

Decomposition of Al13 promoted by salicylic acid under acidic condition: Mechanism study by differential mass spectrometry method and DFT calculation

Decomposition of the polycation Al₁₃O₄(OH)₂₄(H₂O)₁₂⁷⁺ (Al₁₃) promoted by ligand is a vital subject to advance our understanding of natural and artificial occurrence and evolution of aluminum ions, especially in the case of acidic condition that dissolved Al³⁺ species can be released from the Al-bearing substances. However, the microscopic pathway of synchronous proton-promoted and ligand-promoted decomposition process for Al₁₃ is still in the status of ambiguity. Herein, we applied differential mass spectrometry method and DFT calculation to study the initial detailed process of Al₁₃ decomposition under the presence of proton and salicylic acid (H₂Sal). Mass results showed that the mononuclear Al³⁺-H₂Sal complexes dominated the resulting Al species, whereas the monodentate complex Al₁₃HSal⁶⁺ was not observed in the spectra. The difference of decomposition levels between the ligand/Al ratio 0.2 and 0.5 cases revealed that proton and ligand performed synergistic effect in initial Al₁₃ decomposition process, and the proton transfer determined the ring closure efficiency. The ring closure reaction is the prerequisite for the collapse of Al₁₃ structure and detachment of the mononuclear complex. DFT calculations reveal that hydrogen bond plays an important role in inducing the formation of chelated complex accompanying proton transfer. Attachment of protons at the bridging OH⁻ can elongate and weaken the critical bond between targeted Al³⁺ and µ₄-O^2- resulting from delocalization of electron pairs in the oxygen atom. These results demonstrate the detailed mechanism of Al₁₃ composition promoted by ligand and proton, and provide significant understanding for further application and control of Al₁₃.     

纳米Al13的分离方法及混凝效果动态过程的研究

以相同Al13含量、不同浓度的PAC为原料,利用乙醇-丙酮混合溶剂法、SO4^2-／Ba^2 沉淀置换法以及柱层析法分离提纯纳米Al13形态,同时利用Al-Ferron逐时络合比色法、^27Al-NMR等多种现代分析手段进行分析鉴定,比较其分离效果,并采用烧杯实验法和透光率脉动检测技术对Al13形态以及PAC、AlCl3的絮凝效果及絮凝过程中絮集物形成和增长的变化差异作了对比性研究．实验结果表明,乙醇．丙酮混合溶剂法对Al13分离纯化效果最好,分离所得Al13平均粒径大,聚合程度高．柱层析法受柱体积的影响只对低浓度的PAC有较好的分离效果;SO4^2-／Ba^2 沉淀置换法虽具有较好的分离效果,但分离过程有其他杂质离子的加入,影响到产品品质．混凝效果和动态实验结果表明,Al13形态是在絮凝过程中起电中和作用的主要形态,具有较强的除浊及脱色能力,在混凝过程中当絮体受到剪切力的破坏时Al13形态比PAC和AlCl3具有更强重新絮凝的能力．     

降水中汞的赋存形态

在北京市不同地点和不同时期采集降水样品 36个 .分析结果表明 ,汞易形成相对稳定的络合态汞 ,除 Hg⁰_(w) 外各形态汞含量均表现为采暖期大于非采暖期 .降水中各形态汞的含量和百分比按大小排序 ,经统计检验 ,在非采暖期水相中为 Hg^re_(w)>[Hg⁰_(w),Hg²⁺_(w)],颗粒态汞为 Hg^re_(p)>Hg²⁺_(p)>Hg⁰_(p);在采暖期水相中均为 Hg^re_(w)>Hg²⁺_(w)>Hg⁰_(w),颗粒态汞为 Hg^re_(p)>[Hg²⁺_(p),Hg⁰_(p)].在非采暖期颗粒态汞含量及百分比 Hg^T_(p)>溶解态汞 Hg^T_(w),在采暖期颗粒态汞和溶解态汞没有明显差异 .小于 0.45μm颗粒吸附的汞 Hg⁰相对较多 ,Hg²⁺形态汞较少 ,水溶液中 Hg⁰ 形态汞少 ,Hg²⁺形态汞多 ,表明 Hg⁰ 形态汞更易在微小颗粒物上吸附 ,而 Hg²⁺形态汞相当部分可以保留在水溶液中 .     

Al13改性羟基磷灰石的除氟性能研究

为了提高羟基磷灰石（HAP）的除氟效果,采用化学沉淀法合成3种不同Al/Ca值的Al₁₃改性后的HAP吸附材料,并对其进行XRD、FTIR、SEM、BET等表征,考察吸附过程中pH的影响,同时通过吸附热力学、吸附动力学等探讨了其除氟性能.结果表明,Al₁₃-HAP材料比HAP更加疏松多孔,当Al/Ca=0.7时,比表面积增大到了137.2 m²·g^-1,孔容增大到0.8217 cm³·g^-1.FTIR结果表明,Al₁₃的掺入给吸附材料中带入了大量—OH.根据Al₁₃-HAP吸附F^-前后的表征,F^-主要通过配体交换取代Al₁₃-HAP中的—OH从环境中被去除.当Al/Ca=0.4时,Al₁₃-HAP最大除氟效果达到5.03 mg·L^-1;零电荷点pH_PZC为8.46,大于HAP的pH_PZC,具体表现为对天然水体pH值适用性较广.吸附过程与Langmuir吸附模型以及拟二级动力学模型契合度高,这也证实了化学吸附为主要作用,吸附热力学结果表明Al₁₃-HAP吸附氟是自发的吸热过程.     

Separating method and dynamic processes of Nano-Al13

In order to investigate the characteristics of pure Nano-Al₁₃, Nano-Al₁₃ was separated and purified from a series of poly-aluminum chloride (PAC) solutions which had the same Al₁₃ percentage but different total Al concentrations, by using column chromatography, ethanol-acetone resolving and SO²⁻ ₄/Ba²⁺ displacement. The Al₁₃ species yield was characterized by Al-ferron timed complexation spectrophotometry and ²⁷Al-NMR (nuclear magnetic resonance). The coagulation efficiency of Nano-Al₁₃, PAC and AlCl₃ in synthetic water was also investigated by Jar tests. The dynamic process and aggregation state of kaolin suspensions coagulating with Nano-Al₁₃, PAC and AlCl₃ were similarly investigated using a photometric dispersion analyzer 2000 (PDA2000). The experimental results indicated that the ethanol-acetone resolving method was simple and could separate the PAC solution at different concentrations, while column chromatography could separate PAC solutions at low concentrations. The SO₄ ²⁻/Ba²⁺ displacement method could separate PAC solutions at high concentrations. However, extra inorganic cation and anion could be added in the solution during separation. The coagulation efficiency and dynamic experimental results showed that Nano-Al₁₃ with high positive-charged species was effective in removing turbidity and color. The dynamic process results showed that Nano-Al₁₃ also had the best recovery capability after shearing compared with PAC and AlCl₃ because the Nano-Al₁₃ conformation is more effective in charge neutralization. Translated from Acta Scientiae Circumstantiae, 2005, 25(6): 767–772 [译自: 环境科学学报]     

Purification and characterization of Al13 species in coagulant polyaluminum chloride

Nano-Al₁₃ was separated and purified by four methods to investigate its characteristic, and was analyzed by Al-Ferron timed complexation spectrophotometer,²⁷ Al-NMR (nuclear magnetic resonance), and transmission electron microscopy (TEM). Coagulation efficiency of nano-Al₁₃, polyaluminum chloride (PAC), and AlCl₃ in synthetic water were also investigated by jar test. The dynamic process and aggregation state of kaolin suspensions coagulating with nano-Al₁₃, PAC, and AlCl₃ were also investigated. The experimental results indicated that the efficiency of gel column chromatography method was the highest for separating PAC solution with low Al concentration. Ethanol and acetone method was simple and could separated PAC solution with different Al concentrations, while silicon alkylation white block column chromatography method could separate PAC solution only with low Al concentration. The SO₄²−/Ba²⁺ displacement method could separate PAC solution with high Al concentration, but extra inorganic cation and anion could be introduced into the solution during the separation. The coagulation efficiency and dynamic experimental results showed that nano- Al₁₃ with a high positive-charged species was the main species of electric neutralization in coagulation process, and it could reduce the turbidity and increase the effective particles collision rate efficiently in coagulation process. Its coagulation speed and the particle size of coagulant formed were of greatest value in this study.     

聚合氯化铝与有机高分子复合絮凝剂的形态分布研究--Al-Ferron和27Al-NMR相结合

主要研究了Al Ferron逐时络合比色法和2 7Al NMR法应用于聚合铝与有机高分子复合絮凝剂形态分布的测定 .结果表明 ,两种方法分别测定的Alb 和Al13 的结果具有一定的相关性 ;聚合铝与有机高分子复合后其形态分布发生了一定的变化 ,Alb(或Al13 )的含量有所降低 ,但仍是优势形态 ,Ala(或Al单)的含量基本保持不变 .     

聚合氯化铝与有机高分子复合絮凝剂的形态分布研究——AlFerron和~(27)AlNMR相结合

主要研究了Ａｌ－Ｆｅｒｒｏｎ逐时络合比色法和＾２７Ａｌ－ＮＭＲ法应用于聚合铝与有机高分子复合絮凝剂形态分布的测定，结果表明，两种方法分别测定的Ａｌｂ和Ａｌ１３的结果具有一定的相关性；聚合铝与有机高分子复合后其形态分布发生了一定的变化，Ａｌｂ（或Ａｌ１３）的含量有所降低，但仍是优势形态，Ａｌａ（或Ａｌ单）的含量基本保持不变。     

水解聚合铝溶液中形态分布的定量模拟研究

通过Ａｌ－Ｆｅｒｒｏｎ逐时络合比色法和￣（２７）Ａｌ核磁共振（ＮＭＲ）法，并应用“ＭＩＮＥＱＬ”化学平衡模式计算法，对采用不同反应途径制得的聚合铝（ＰＡＣ）溶液中的化学形态分布规律进行了定量模拟研究和对比。模式计算结果与两种实验定量分析结果都较为吻合，结果表明，在水解聚合铝溶液中较稳定的化学形态主要有五种：一种单体形态［ａｌ＿ａ］，即Ａｌ￣（３＋），Ａｌ（ＯＨ）￣（２＋），Ａｌ（ＯＨ）＿２￣＋；３种聚合形态［Ａｌ＿ｂ］，即和以及一种溶胶或凝胶形态［Ａｌ＿ｃ］，即Ａｌ（ＯＨ）＿３（ａｍ）．这些化学形态的分布和转化不仅取决于溶液的化学特征，而且也取决于制备方法的不同。     

混凝过程中铝与聚合铝水解形态的动力学转化及其稳定性

采用Ｆｅｒｒｏｎ逐时络合比色法，并结合电泳测定研究了混凝过程中氯化铝和聚合氯化铝的水解形态动力学转化及稳定性。结果表明，ＡＣ在混凝过程中所形成的水解形态完全不同于ＰＡＣ的预制水解聚合形态，其电荷及分子量均明显低于聚合铝且不稳定，ＡＣ随混凝条件如投加浓度、ＰＨ和混合时间而变，而ＰＡＣ－２５水解聚合形态不随混凝条件变化，始终保持稳定状态，ＡＣ水解沉淀规律与理论计算相符并形成无定形Ａｌ（ＯＨ）３絮体颗粒