NH3-SCR performance and the resistance to SO2 for Nb doped vanadium based catalyst at low temperatures

Niobium oxide as the promoter was doped in the V/WTi catalyst for the selective catalytic reduction(SCR)of NO.The results showed that the addition of Nb_2O_5could improve the SCR activity at low temperatures and the 6 wt.%additive was an appropriate dosage.The enhanced reaction activity of adsorbed ammonia species and the improved dispersion of vanadium oxide might be the reasons for the elevation of SCR activity at low temperatures.The resistances to SO_2of 3V6Nb/WTi catalyst at different temperatures were investigated.FTIR spectrum and TG-FTIR result indicated that the deposition of ammonium sulfate species was the main deactivation reason at low temperatures,which still exhibited the reactivity with NO above 200°C on the catalyst surface.There was a synergistic effect among NH_3,H_2O and SO_2that NH_3and H_2O both accelerated the catalyst deactivation in the presence of SO_2at 175°C.The thermal treatment at 400°C could regenerate the deactivated catalyst and get SCR activity recovered.The particle and monolith catalysts both kept stable NO_xconversion at 225°C with high concentration of H_2O and SO_2during the long time tests.     

Fe-MnOx-CeO2/ZrO2低温催化还原NO性能研究

以纳米ZrO2为载体,用浸渍法制备出Fe-MnOx-CeO2/ZrO2催化剂,考察了活性组分配比和助剂负载量对催化剂低温NH3选择性催化还原NO活性的影响,并对催化剂进行了XRD、SEM、EDS和BET表征;探讨了温度、H2O和SO2对Fe-MnOx-CeO2/ZrO2催化剂低温下NH3选择性催化还原NO的影响,结果表明,无SO2和H2O条件下,8%Fe-10%MnOx-CeO2/ZrO2催化剂具有良好的催化活性和稳定性.120℃时,催化剂的脱硝效率为85.23%,当温度升至180℃时,脱硝效率可达到92.0%.SO2和H2O共存条件下,催化剂易失活,采用傅立叶变换红外光谱对各反应阶段的催化剂进行了表征,对其失活机制进行深入研究,结果表明,催化剂失活的主要原因是催化剂表面硫酸铵盐的沉积和催化剂本身活性成分的硫酸盐化.     

Performance and mechanism study for low-temperature SCR of NO with propylene in excess oxygen over Pt/TiO2 catalyst

A 0.5 wt.% Pt/TiO2 catalyst was prepared and used for the low-temperature selective catalytic reduction(SCR) of NO with C3 H6 in the presence of excess oxygen.The effects of Pt loading and O2 concentration on Pt/TiO2 catalytic performance for low-temperature SCR were investigated.It was found that optimal Pt loading was 0.5 wt.% and excess O2 favored low-temperature SCR of NOx.The mechanism of low-temperature SCR of NO with C3 H6 was investigated with respect to the behavior of adsorbed species over Pt/TiO2 at 150°C using in situ DRIFTS.The results indicated that surface nitrosyl species(Pt δ+-NO and Ti 3+-NO) and Pt 2+-CO are main reaction intermediates during the interactions of NO,C3 H6 and O2.A simplified NO decomposition mechanism for the low-temperature SCR of NO with C3 H6 was proposed.     

添加硫酸根对燃煤电厂V2O5基脱硝催化剂性能的影响

采用浸渍法分别制得活性物质V2O5的含量均为1%和SO2-4的含量不同的催化剂,并通过实验研究了添加SO-24对燃煤电厂SCR法脱硝技术中V2O5基催化剂活性和热稳定性的影响.在固定床反应器上,在NH3/NOx物质的量比为1.0和模拟烟气流量为72 L·h-1条件下,对几种催化剂的活性进行了测试,结果显示,当负载加入5.01%的SO2-4或使用含有8.91%的SO-24载体制备催化剂时,催化剂的活性提高最为显著;在TGA 92热重.差热分析仪上对这两种催化剂进行了热重实验,结果表明,添加的硫酸根对催化剂的热稳定性也有一定提高,且不会影响电厂SCR催化剂的使用.     

CeO2改性MnOx/Al2O3的低温SCR法脱硝性能及机制研究

采用凝胶溶胶法制备大比表面积的Al2O3载体,等体积浸渍法配制负载MnOx和CeO2组分的CeO2-MnOx催化剂.以NH3为还原剂,一定的空气流速及合适的气体配比的条件下,考察所制备的催化剂在70～300℃范围内低温SCR法的脱硝性能及机制,同时分别对催化剂进行BET、XRD、SEM等表征实验,研究催化剂的理化性质....     

SO2对Ag/Al2O3催化剂上CH3OH还原NO性能的影响

用溶胶-凝胶混合法制备了Ag负载量为5%的Ag/A1₂O₃催化剂.研究了富氧条件下,SO₂对CH₃OH在催化剂上还原NO性能的影响.结果表明,反应气不含SO₂和H₂O时,NO还原活性温度较低,有显著量N₂O生成,这被归因为反应过程中,部分氧化态Ag被还原为金属Ag.添加SO₂或同时添加SO₂和H_{2相似文献}   

核-壳结构的Fe-FeOxH2x-3催化UV/H2O2降解腐殖酸

采用硼氢化钠还原法制备了核-壳结构的Fe-FeOxH2x-3纳米复合材料,在近紫外光和H2O2催化条件下,对饮用水消毒副产物前驱体腐殖酸的去除比纳米零价铁的去除高.说明零价铁表面铁氧化物能加速界面电子转移,提高反应效率.探讨了H2O2浓度、腐殖酸初始浓度和起始溶液pH对反应速率的影响.研究结果表明,H2O2最佳投加量为5 mmol·L-1,在pH为5～9时,催化剂都显示了较高的活性;腐殖酸不但被脱色降解,而且TOC去除率达到60%,并且生成的中间产物降低了三氯甲烷的生成趋势.     

钒和钨负载量对V2O5-WO3/TiO2表面形态及催化性能的影响

采用浸渍法制备了一系列不同钒和钨负载量的V₂O₅-WO₃/TiO₂催化剂样品,对样品NH₃选择性催化还原NO性能进行了评价,并用BET、XRD、XPS等手段对催化剂样品的表面形态进行了表征.研究发现,钒的负载量对催化剂的比表面积和催化活性有显著影响,当钒负载量从1％升高到8％时,催化剂比表面积下降了16 m²/g,最高活性温度降低了约100℃.钨起到稳定剂和助剂的双重作用,当钒负载量为1％时,钨负载量从0升高到6％,催化剂比表面积仅下降了3 m²/g,而活性温度窗口向高温和低温各拓宽了约50℃.研究表明钒和钨负载量都能影响催化剂表面的VO_x物种,但对催化剂的表面晶型没有明显影响.     

Treatment of phenol wastewater by microwave-induced ClO2-CuOx/Al2O3 catalytic oxidation process

The catalyst of CuOx/Al2O3 was prepared by the dipping-sedimentation method using γ-Al2O3 as a carrier. CuO and Cu2O were loaded on the surface of γ-Al2O3, characterized by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). In the presence of CuOx/Al2O3, the microwave-induced chlorine dioxide (ClO2) catalytic oxidation process was conducted for the treatment of synthetic wastewater containing 100 mg/L phenol. The relationships between removal percentage and initial ClO2 concentration, catalyst dosage, microwave power, contact time, initial phenol concentration and pH were investigated and the results showed that microwave-induced ClO2-CuOx/Al2O3 process could effectively degrade contaminants in a short reaction time with a low oxidant dosage, extensive pH range. Under a given condition (ClO2 concentration 80 mg/L, microwave power 50 W, contact time 5 min, catalyst dosage 50 g/L, pH 9), phenol removal percentage approached 92.24%, corresponding to 79.13% of CODCr removal. The removal of phenol by microwave-induced ClO2-CuOx/Al2O3 catalytic oxidation process was a complicated non-homogeneous solid/water reaction, which fitted pseudo-first-order by kinetics. Compared with traditional ClO2 oxidation, ClO2 catalytic oxidation and microwave-induced ClO2 oxidation, microwave-induced ClO2 catalytic oxidation system could significantly enhance the degradation efficiency. It provides an effective technology for the removal of phenol wastewater.     

γ-Al_2O_3催化C_xH_yO_z还原NO_x的研究进展

概述了γ-Al2O3催化CxHyOz还原NOX的发展情况。着重分析了脱硝反应机理、NO2生成问题及各种CxHyOz还原剂的脱硝活性。并探讨了O2、水蒸汽和SO2对脱硝反应的影响。     

Al2O3为载体的催化剂净化贫燃汽车尾气研究

在富氧条件下,考察了C₃H₆和C₂H₅OH在Ag/Al₂O₃、In/Al₂O₃、Sn/Al₂O₃、Co/Al₂O₃、Pt/Al₂O₃和Ag/Al₂O₃+Pt/Al₂O₃组合催化剂上选择性还原NO的性能.结果表明,Ag/Al₂O₃具有最高的NO还原活性.在负载型过渡金属氧化物催化剂上,会生成显著量的CO,其HC和CO氧化转化温度也远远高于Pt/Al₂O₃催化剂.串联组合Ag/Al₂O₃+Pt/Al₂O₃催化剂可显著拓宽活性温度范围,促进HC和CO氧化,降低N₂O和CH₃CHO生成量.     

Ag/Al2O3催化剂用于碳氢化合物选择性还原NO

比较了富氧条件下CH4、C3H8、C3H6和C2H5OH分别用作还原剂时,NO在Ag/Al2O3催化剂上的还原活性.结果表明, CH4和C3H8还原NO的活性很低,而C3H6和C2H5OH能有效地还原NO.在此基础上,研究了H2O和SO2对C3H6和C2H5OH在Ag/Al2O3催化剂上还原NO活性的影响.结果表明,H2O的存在会降低低温区的NO还原活性,而且这种影响是可逆的.将H2O 和SO2同时加入反应混合气,引起NO还原活性较大幅度降低,结合程序升温脱附实验结果,认为可能是由于存在SO2时,Ag/Al2O3催化剂吸附NO的能力降低.     

Unraveling SO2-tolerant mechanism over Fe2（SO4）3/TiO2 catalysts for NOx reduction

Developing low-temperature SO₂-tolerant catalysts for the selective catalytic reduction of NO_x is still a challenging task. The sulfation of active metal oxides and deposition of ammonium bisulfate deactivate catalysts, due to the difficult decomposition of the as-formed sulfate species at low temperatures（<300 °C）. In recent years, metal sulfate catalysts have attracted increasing attention owing to their good catalytic activity and strong SO₂ tolerance at hi...     

Effect of MoO3 on vanadium based catalysts for the selective catalytic reduction of NOx with NH3 at low temperature

The selective catalytic reduction(SCR) activities of the MoO_3 doped V/WTi catalysts prepared by the incipient wetness impregnation method at low temperature were investigated.The results showed that the addition of MoO_3 could enhance the NO_ xconversion at low temperature and the best SCR activity was obtained when the dosage of MoO_3 reached5 wt.%. The NH3-TPD and DRIFTS experiments indicated that the addition of MoO_3 changed the type and number of acid sites on the surface of catalysts and reaction activities of acid sites were altered at the same time. The redox capacity and amount of active oxygen species got improved for V3Mo5/WTi catalyst, which could be confirmed by the H_2-TPR and transient response experiments. Water vapor inhibited the NO_xconversion at low temperature. Deposition of ammonium sulfate or bisulfate might be main reason for the loss of catalytic activity in the presence of SO_2 at low temperature. Choosing the suitable NH_3/NO ratio and elevation of reaction temperature both could weaken the influence of SO_2 on the SCR activity of the V3Mo5/WTi catalyst. Thermal treatment of the deactivated catalyst at350°C could get the low temperature activity recovered. The decrease of GHSV improved the de NO_x efficiency at low temperature and we speculated that the rational technological process and operation parameters could contribute to the application of this kind of catalysts in real industrial environment.     

V2O5/TiO2与MoO3/TiO2催化剂表面结构形貌及其对催化氧化碳烟活性的影响

为研究纳米级V₂O₅与MoO₃催化剂表面结构对其催化氧化碳烟活性的影响,以TiO₂为载体,采用等体积浸渍法制备了不同负载率(5%、10%、20%、40%)的V₂O₅/TiO₂与MoO₃/TiO₂催化剂,通过扫描电镜(SEM)、X射线衍射仪(XRD)对比研究了2种催化剂在TiO₂载体上的分散状态及物相结构.以Printex-U碳黑为试验用碳烟,采用热重分析仪对V₂O₅与MoO₃催化剂催化碳烟氧化的活性进行了比较.结果表明:V₂O₅与MoO₃在TiO₂载体上均存在一个单层分散饱和阈值,分别为V20(负载率为20%,下同)、Mo10,在该阈值前后活性组分在载体上分别以单层分散状态和明显的晶态存在.对于V₂O₅催化剂,其最佳催化活性出现在负载率接近单层分散饱和阈值时,与无催化状态相比,T_i(起燃温度)、T_p(最大失重率温度)以及T_f(燃尽温度)分别下降了69.1、46.0、23.0 ℃,有明显的阈值效应.而对于MoO₃催化剂,因其自身低熔点性而表现出良好的表面迁移能力,再加上α-MoO₃晶体特有的层状结构,使其可释放出更多的晶格氧,随着负载率的增加,该催化剂催化氧化碳烟活性持续增加,并且未观察到明显的阈值效应.研究显示,在相同负载率下,MoO₃催化剂催化氧化碳烟活性均高于V₂O₅催化剂.      

Effect of Ce doping of TiO2 support on NH3-SCR activity over V2O5-WO3/CeO2-TiO2 catalyst

CeO2–TiO2composite supports with different Ce/Ti molar ratios were prepared by a homogeneous precipitation method, and V2O5–WO3/CeO2–TiO2catalysts for the selective catalytic reduction（SCR） of NOx with NH3 were prepared by an incipient-wetness impregnation method. These catalysts were characterized by means of BET, XRD, UV–Vis,Raman and XPS techniques. The results showed that the catalytic activity of V2O5–WO3/TiO2 was greatly enhanced by Ce doping（molar ratio of Ce/Ti = 1/10） in the TiO2 support.The catalysts that were predominantly anatase TiO2 showed better catalytic performance than the catalysts that were predominantly fluorite CeO2. The Ce additive could enhance the surface adsorbed oxygen and accelerate the SCR reaction. The effects of O2 concentration, ratio of NH3/NO, space velocity and SO2 on the catalytic activity were also investigated. The presence of oxygen played an important role in NO reduction. The optimal ratio of NH3/NO was 1/1 and the catalyst had good resistance to SO2 poisoning.     

Iron-doped Mn-Ce/TiO2 catalyst for low temperature selective catalytic reduction of NO with NH3

The catalysts of iron-doped Mn-Ce/TiO 2(Fe-Mn-Ce/TiO 2) prepared by sol-gel method were investigated for low temperature selective catalytic reduction(SCR) of NO with NH 3.It was found that the NO conversion over Fe-Mn-Ce/TiO 2 was obviously improved after iron doping compared with that over Mn-Ce/TiO 2.Fe-Mn-Ce/TiO 2 with the molar ratio of Fe/Ti = 0.1 exhibited the highest activity.The results showed that 96.8% NO conversion was obtained over Fe(0.1)-Mn-Ce/TiO 2 at 180°C at a space velocity of 50,000 hr 1.Fe-Mn-Ce/TiO 2 exhibited much higher resistance to H 2 O and SO 2 than that of Mn-Ce/TiO 2.The properties of the catalysts were characterized using X-ray diffraction(XRD),N 2 adsorption,temperature programmed desorption(NH 3-TPD and NOx-TPD),and Xray photoelectron spectroscopy(XPS) techniques.BET,NH3-TPD and NOx-TPD results showed that the specific surface area and NH3 and NOx adsorption capacity of the catalysts increased with iron doping.It was known from XPS analysis that iron valence state on the surface of the catalysts were in Fe3+ state.The doping of iron enhanced the dispersion and oxidation state of Mn and Ce on the surface of the catalysts.The oxygen concentrations on the surface of the catalysts were found to increase after iron doping.Fe-Mn-Ce/TiO2 represented a promising catalyst for low temperature SCR of NO with NH3 in the presence of H2 O and SO2.     

汽车尾气净化催化剂Ag/SAPO-34选择性催化还原NO

评价了Ag/SAPO-34分子筛催化剂选择性还原NO的活性,并运用漫反射红外光谱原位研究NO在Ag/SAPO-34催化剂上的选择性催化还原机理.结果表明Ag/SAPO-34有良好的低温活性,在氧气浓度为3.6%和温度为573K～673K时NO还原成N2的转化率达70%;催化剂活性随C3H6浓度的增加而升高,随空速的增加而稍有下降.基于漫反射红外光谱,认为反应机理为:NO、丙烯和氧反应,在Ag/SAPO-34催化剂上生成吸附的有机-氮氧化物,再由这些吸附物种分解成N₂,催化还原的关键是形成有机-氮氧化物中间体.氧的作用是充分促进丙烯活化以及增加NO_x吸附态含量,并且氧的存在是有效产生一系列中间物不可缺少的条件.     

SO2对CoH-ZSM-5催化CH4还原NO催化性能的影响

研究了富氧条件下SO₂对CoH-ZSM-5上CH₄选择还原NO(CH₄-SCR)的影响,应用SO₂-TPSR,NO+(O₂)-TPD等方法研究了产生中毒的原因并定量研究了被毒化的活性位.反应在773 K进行时,加入体积分数78×10^-6SO₂,NO的转化率由72%逐渐降低并稳定在58%,提高反应温度至823 K,NO稳定转化率上升至62%.同时加入2.5     

Mn-CeOx/Ti-PILCs for selective catalytic reduction of NO with NH3 at low temperature

Titanium-pillared clays (Ti-PILCs) were obtained by different ways from TiCl₄, Ti(OC₃H₇)₄ and TiOSO₄, respectively. Mn-CeO_x/Ti-PILCs were then prepared and their activities of selective catalytic reduction (SCR) of NO with NH₃ at low-temperature were evaluated. Mn-CeO_x/Ti-PILCs were characterized by X-ray diffraction, N₂ adsorption, Fourier transform infrared spectroscopy, thermal analysis, temperature-programmed desorption of ammonia and H₂-temperature-programmed reduction. It was found that Ti-pillar tend to be helpful for the enlargement of surface area, pore volume, acidity and the enhancement of thermal stability for Mn-CeO_x/Ti-PILCs. Mn-CeO_x/Ti-PILCs catalysts were active for the SCR of NO. Among three resultant Mn-CeO_x/Ti-PILCs, the catalyst from TiOSO₄ showed the highest activity with 98% NO conversion at 220℃, it also exhibited good resistance to H₂O and SO₂ in flue gas. The catalyst from TiCl₄ exhibited the lowest activity due to the unsuccessful pillaring process.