Time-dependent metabolomics uncover dynamic metabolic adaptions in MCF-7 cells exposed to bisphenol A

● Metabolomic temporal profiling of cells exposed to xenobiotics. ● Global metabolome dysregulation patterns with time-resolved landscapes. ● Synchronized regulation behavior and specific dysregulation sensitivity. ● Temporal metabolic adaptions indicated cellular emphasis transition. The biochemical consequences induced by xenobiotic stress are featured in dose-response and time-resolved landscapes. Understanding the dynamic process of cellular adaptations is crucial in conducting the risk assessment for chemical exposure. As one of the most phenotype-related omics, metabolome in response to environmental stress can vary from seconds to days. Up to now, very few dynamic metabolomics studies have been conducted to provide time-dependent mechanistic interpretations in understanding xenobiotics-induced cellular adaptations. This study aims to explore the time-resolved metabolite dysregulation manner and dynamically perturbed biological functions in MCF-7 cells exposed to bisphenol A (BPA), a well-known endocrine-disrupting chemical. By sampling at 11 time points from several minutes to hours, thirty seven significantly dysregulated metabolites were identified, ranging from amino acids, fatty acids, carboxylic acids and nucleoside phosphate compounds. The metabolites in different pathways basically showed distinct time-resolved changing patterns, while those within the common class or same pathways showed similar and synchronized dysregulation behaviors. The pathway enrichment analysis suggested that purine metabolism, pyrimidine metabolism, aminoacyl-tRNA biosynthesis as well as glutamine/glutamate (GABA) metabolism pathways were heavily disturbed. As exposure event continued, MCF-7 cells went through multiple sequential metabolic adaptations from cell proliferation to energy metabolism, which indicated an enhancing cellular requirement for elevated energy homeostasis, oxidative stress response and ER-α mediated cell growth. We further focused on the time-dependent metabolite dysregulation behavior in purine and pyrimidine metabolism, and identified the impaired glycolysis and oxidative phosphorylation by redox imbalance. Lastly, we established a restricted cubic spline-based model to fit and predict metabolite’s full range dysregulation cartography, with metabolite’ sensitivity comparisons retrieved and novel biomarkers suggested. Overall, the results indicated that 8 h BPA exposure leaded to global dynamic metabolome adaptions including amino acid, nucleoside and sugar metabolism disorders, and the dysregulated metabolites with interfered pathways at different stages are of significant temporal distinctions.     

Perfluoroalkane acids in human milk under the global monitoring plan of the Stockholm Convention on Persistent Organic Pollutants (2008–2019)

● Perfluorooctanesulfonic acid and perfluorooctanoic acid highest in human milk. ● All other perfluoroalkane substances had median values of zero (101 samples). ● Branched PFOS recommended to be analyzed separately from linear isomer. ● PFOS and PFOA showed differentiated regional and income distribution. ● Human health risk assessment values not yet available at global level. Within the global monitoring plan (GMP) established by article 16 of the Stockholm Convention on Persistent Organic Pollutants, perfluorooctane sulfonic acid (PFOS), perfluorooctanoic acid (PFOA), and perfluorohexane sulfonic acid (PFHxS) are recommended for analysis in core matrices to assess occurrence and changes geographically and with time. In 101 samples consisting of 86 national pools and 15 pools from States in Brazil obtained between 2008 and 2019, PFHxS was detected in 17% of the national pools and none in Brazil. PFOA and PFOS had a detection frequency of 100% and 92%, respectively. Other perfluoroalkane substances (PFAS) had either low detection frequencies and median values of zero (carboxylic acids C₄–C₁₁; except PFOA) or could not be quantified in any sample (sulfonic acids, C₄–C₁₀, and long-chain carboxylic acids, C₁₂–C₁₄). Correlation between PFOA and PFOS was moderately (r = 0.58). Whereas median values were almost identical (18.9 pg/g f.w. for PFOS; 18.6 pg/g f.w. for PFOA), PFOS showed larger ranges (< 6.2 pg/g f.w.–212 pg/g f.w.) than PFOA (< 6.2 pg/g f.w.–63.4 pg/g f.w.). It was shown that wealthier countries had higher PFOA concentrations than poorer countries. No difference in concentrations was found for samples collected in countries having or not having ratified the Stockholm Convention amendments to list PFOS or PFOA. The goal to achieve 50% decrease in concentrations within ten years was met by Antigua and Barbuda, Kenya, and Nigeria for PFOS and by Antigua and Barbuda for PFOA. In a few cases, increases were observed; one country for PFOS, four countries for PFOA.     

The impact of different voltage application modes on biodegradation of chloramphenicol and shift of microbial community structure

● Presented coupled system enhanced biodegradation of antibiotic chloramphenicol. ● HRT and electrical stimulation modes were key influencing factors. ● Electrical stimulation had little effect on the chloramphenicol metabolic pathway. ● Microbial community structure varied with the voltage application mode. Exoelectrogenic biofilms have received considerable attention for their ability to enhance electron transfer between contaminants and electrodes in bioelectrochemical systems. In this study, we constructed anaerobic-aerobic-coupled upflow bioelectrochemical reactors (AO-UBERs) with different voltage application modes, voltages and hydraulic retention times (HRTs). In addition, we evaluated their capacity to remove chloramphenicol (CAP). AO-UBER can effectively mineralize CAP and its metabolites through electrical stimulation when an appropriate voltage is applied. The CAP removal efficiencies were ~81.1%±6.1% (intermittent voltage application mode) and 75.2%±4.6% (continuous voltage application mode) under 0.5 V supply voltage, which were ~21.5% and 15.6% greater than those in the control system without voltage applied, respectively. The removal efficiency is mainly attributed to the anaerobic chamber. High-throughput sequencing combined with catabolic pathway analysis indicated that electrical stimulation selectively enriched Megasphaera, Janthinobacterium, Pseudomonas, Emticicia, Zoogloea, Cloacibacterium and Cetobacterium, which are capable of denitrification, dechlorination and benzene ring cleavage, respectively. This study shows that under the intermittent voltage application mode, AO-UBERs are highly promising for treating antibiotic-contaminated wastewater.     

Characterization and variation of dissolved organic matter in composting: a critical review

● Effect of composting approaches on dissolved organic matter (DOM). ● Effect of composting conditions on the properties of DOM. ● Character indexes of DOM varied in composting. ● The size, hydrophobicity, humification, and electron transfer capacity increased. ● The hydrophilicity, protein-like materials, and aliphatic components reduced. As the most motive organic fraction in composting, dissolved organic matter (DOM) can contribute to the transfer and dispersal of pollutants and facilitate the global carbon cycle in aquatic ecosystems. However, it is still unclear how composting approaches and conditions influence the properties of compost-derived DOM. Further details on the shift of DOM character indexes are required. In this study, the change in properties of compost-derived DOM at different composting approaches and the effect of composting conditions on the DOM characteristics are summarized. Thereafter, the change in DOM character indexes’ in composting was comprehensively reviewed. Along with composting, the elements and spectral properties (chromophoric DOM (CDOM) and fluorescent DOM (FDOM)) were altered, size and hydrophobicity increased, and aromatic-C and electron transfer capacity were promoted. Finally, some prospects to improve this study were put forward. This paper should facilitate the people who have an interest in tracing the fate of DOM in composting.     

The role of lipids in fermentative propionate production from the co-fermentation of lipid and food waste

● Lipid can promote PA production on a target from food waste. ● PA productivity reached 6.23 g/(L∙d) from co-fermentation of lipid and food waste. ● Lipid promoted the hydrolysis and utilization of protein in food waste. ● Prevotella , Veillonella and norank _f _Propioni bacteriaceae were enriched. ● Main pathway of PA production was the succinate pathway. Food waste (FW) is a promising renewable low-cost biomass substrate for enhancing the economic feasibility of fermentative propionate production. Although lipids, a common component of food waste, can be used as a carbon source to enhance the production of volatile fatty acids (VFAs) during co-fermentation, few studies have evaluated the potential for directional propionate production from the co-fermentation of lipids and FW. In this study, co-fermentation experiments were conducted using different combinations of lipids and FW for VFA production. The contributions of lipids and FW to propionate production, hydrolysis of substrates, and microbial composition during co-fermentation were evaluated. The results revealed that lipids shifted the fermentation type of FW from butyric to propionic acid fermentation. Based on the estimated propionate production kinetic parameters, the maximum propionate productivity increased significantly with an increase in lipid content, reaching 6.23 g propionate/(L∙d) at a lipid content of 50%. Propionate-producing bacteria Prevotella, Veillonella, and norank_f_Propionibacteriaceae were enriched in the presence of lipids, and the succinate pathway was identified as a prominent fermentation route for propionate production. Moreover, the Kyoto Encyclopedia of Genes and Genomes functional annotation revealed that the expression of functional genes associated with amino acid metabolism was enhanced by the presence of lipids. Collectively, these findings will contribute to gaining a better understanding of targeted propionate production from FW.     

Collaborative control of fine particles and ozone required in China for health benefit

● Increased DAAO offsets 3/4 of the decrease of DAAP in 2013–2020. ● DAAO increases are mainly due to O₃ concentration increase and population aging. ● Health benefit from PM_2.5 reduction after 2017 is larger than that before 2017. ● Reducing PM_2.5 concentration by 1% results in 0.6% reduction of DAAP. ● Reducing O₃ concentration by 1% results in 2% reduction of DAAO. PM_2.5 concentration declined significantly nationwide, while O₃ concentration increased in most regions in China in 2013–2020. Recent evidences proved that peak season O₃ is related to increased death risk from non-accidental and respiratory diseases. Based on these new evidences, we estimate excess deaths associated with long-term exposure to ambient PM_2.5 and O₃ in China following the counterfactual analytic framework from Global Burden Disease. Excess deaths from non-accidental diseases associated with long-term exposure to ambient O₃ in China reaches to 579 (95% confidential interval (CI): 93, 990) thousand in 2020, which has been significantly underestimated in previous studies. In addition, the increased excess deaths associated with long-term O₃ exposure (234 (95% CI: 177, 282) thousand) in 2013–2020 offset three quarters of the avoided excess deaths (302 (95% CI: 244, 366) thousand) mainly due to PM_2.5 exposure reduction. In key regions (the North China Plain, the Yangtze River Delta and the Fen-Wei Plain), the former is even larger than the latter, particularly in 2017–2020. Health benefit of PM_2.5 concentration reduction offsets the adverse effects of population growth and aging on excess deaths attributed to PM_2.5 exposure. Increase of excess deaths associated with O₃ exposure is mainly due to the strong increase of O₃ concentration, followed by population aging. Considering the faster population aging process in the future, collaborative control, and faster reduction of PM_2.5 and O₃ are needed to reduce the associated excess deaths.     

Salinity exchange between seawater/brackish water and domestic wastewater through electrodialysis for potable water

● Present a general concept called “salinity exchange”. ● Salts transferred from seawater to treated wastewater until completely switch. ● Process demonstrated using a laboratory-scale electrodialysis system. ● High-quality desalinated water obtained at ~1 mL/min consuming < 1 kWh/m ³ energy. Two-thirds of the world’s population has limited access to potable water. As we continue to use up our freshwater resources, new and improved techniques for potable water production are warranted. Here, we present a general concept called “salinity exchange” that transfers salts from seawater or brackish water to treated wastewater until their salinity values approximately switch, thus producing wastewater with an increased salinity for discharge and desalinated seawater as the potable water source. We have demonstrated this process using electrodialysis. Salinity exchange has been successfully achieved between influents of different salinities under various operating conditions. Laboratory-scale salinity exchange electrodialysis (SEE) systems can produce high-quality desalinated water at ~1 mL/min with an energy consumption less than 1 kWh/m³. SEE has also been operated using real water, and the challenges of its implementation at a larger scale are evaluated.     

Surface-enhanced Raman spectroscopy for emerging contaminant analysis in drinking water

● Definition of emerging contaminants in drinking water is introduced. ● SERS and standard methods for emerging contaminant analysis are compared. ● Enhancement factor and accessibility of SERS hot spots are equally important. ● SERS sensors should be tailored according to emerging contaminant properties. ● Challenges to meet drinking water regulatory guidelines are discussed. Emerging contaminants (ECs) in drinking water pose threats to public health due to their environmental prevalence and potential toxicity. The occurrence of ECs in our drinking water supplies depends on their physicochemical properties, discharging rate, and susceptibility to removal by water treatment processes. Uncertain health effects of long-term exposure to ECs justify their regular monitoring in drinking water supplies. In this review article, we will summarize the current status and future opportunities of surface-enhanced Raman spectroscopy (SERS) for EC analysis in drinking water. Working principles of SERS are first introduced and a comparison of SERS and liquid chromatography-tandem mass spectrometry in terms of cost, time, sensitivity, and availability is made. Subsequently, we discuss the strategies for designing effective SERS sensors for EC analysis based on five categories—per- and polyfluoroalkyl substances, novel pesticides, pharmaceuticals, endocrine-disrupting chemicals, and microplastics. In addition to maximizing the intrinsic enhancement factors of SERS substrates, strategies to improve hot spot accessibilities to the targeting ECs are equally important. This is a review article focusing on SERS analysis of ECs in drinking water. The discussions are not only guided by numerous endeavors to advance SERS technology but also by the drinking water regulatory policy.     

Differences in distributions,assembly mechanisms,and putative interactions of AOB and NOB at a large spatial scale

● Nitrifiers in WWTP were investigated at large spatial scale. ● AOB populations varied greatly but NOB populations were similar among cities. ● Drift dominated both AOB and NOB assembling processes. ● DO did not show a significant effect on NOB. ● NOB tended to cooperate with AOB and non-nitrifying microorganisms. Ammonia-oxidizing bacteria (AOB) and nitrite-oxidizing bacteria (NOB) play crucial roles in removing nitrogen from sewage in wastewater treatment plants (WWTPs) to protect water resources. However, the differences in ecological properties and putative interactions of AOB and NOB in WWTPs at a large spatial scale remain unclear. Hence, 132 activated sludge (AS) samples collected from 11 cities across China were studied by utilizing 16S rRNA gene sequencing technology. Results indicated that Nitrosomonas and Nitrosospira accounted for similar ratios of the AOB community and might play nearly equal roles in ammonia oxidation in AS. However, Nitrospira greatly outnumbered other NOB genera, with proportions varying from 94.7% to 99.9% of the NOB community in all WWTPs. Similar compositions and, hence, a low distance–decay turnover rate of NOB (0.035) across China were observed. This scenario might have partly resulted from the high proportions of homogenizing dispersal (~13%). Additionally, drift presented dominant roles in AOB and NOB assembling mechanisms (85.2% and 81.6% for AOB and NOB, respectively). The partial Mantel test illustrated that sludge retention time and temperature were the primary environmental factors affecting AOB and NOB communities. Network results showed that NOB played a leading role in maintaining module structures and node connections in AS. Moreover, most links between NOB and other microorganisms were positive, indicating that NOB were involved in complex symbioses with bacteria in AS.     

Development of machine learning multi-city model for municipal solid waste generation prediction

● A database of municipal solid waste (MSW) generation in China was established. ● An accurate MSW generation prediction model (WGMod) was constructed. ● Key factors affecting MSW generation were identified. ● MSW trends generation in Beijing and Shenzhen in the near future are projected. Integrated management of municipal solid waste (MSW) is a major environmental challenge encountered by many countries. To support waste treatment/management and national macroeconomic policy development, it is essential to develop a prediction model. With this motivation, a database of MSW generation and feature variables covering 130 cities across China is constructed. Based on the database, advanced machine learning (gradient boost regression tree) algorithm is adopted to build the waste generation prediction model, i.e., WGMod. In the model development process, the main influencing factors on MSW generation are identified by weight analysis. The selected key influencing factors are annual precipitation, population density and annual mean temperature with the weights of 13%, 11% and 10%, respectively. The WGMod shows good performance with R² = 0.939. Model prediction on MSW generation in Beijing and Shenzhen indicates that waste generation in Beijing would increase gradually in the next 3–5 years, while that in Shenzhen would grow rapidly in the next 3 years. The difference between the two is predominately driven by the different trends of population growth.     

Property-performance relationship of core-shell structured black TiO2 photocatalyst for environmental remediation

● Properties and performance relationship of CSBT photocatalyst were investigated. ● Properties of CSBT were controlled by simply manipulating glycerol content. ● Performance was linked to semiconducting and physicochemical properties. ● CSBT (W:G ratio 9:1) had better performance with lower energy consumption. ● Phenols were reduced by 48.30% at a cost of $2.4127 per unit volume of effluent. Understanding the relationship between the properties and performance of black titanium dioxide with core-shell structure (CSBT) for environmental remediation is crucial for improving its prospects in practical applications. In this study, CSBT was synthesized using a glycerol-assisted sol-gel approach. The effect of different water-to-glycerol ratios (W:G = 1:0, 9:1, 2:1, and 1:1) on the semiconducting and physicochemical properties of CSBT was investigated. The effectiveness of CSBT in removing phenolic compounds (PHCs) from real agro-industrial wastewater was studied. The CSBT synthesized with a W:G ratio of 9:1 has optimized properties for enhanced removal of PHCs. It has a distinct core-shell structure and an appropriate amount of Ti³⁺ cations (11.18%), which play a crucial role in enhancing the performance of CSBT. When exposed to visible light, the CSBT performed better: 48.30% of PHCs were removed after 180 min, compared to only 21.95% for TiO₂ without core-shell structure. The CSBT consumed only 45.5235 kWh/m³ of electrical energy per order of magnitude and cost $2.4127 per unit volume of treated agro-industrial wastewater. Under the conditions tested, the CSBT demonstrated exceptional stability and reusability. The CSBT showed promising results in the treatment of phenols-containing agro-industrial wastewater.     

PM2.5 concentration declining saves health expenditure in China

● Monthly hospitalization expenses are sensitive to increases in PM_2.5 exposure. ● The increased PM_2.5 causes patients with CHD and LRI to stay longer in the hospital. ● The impact of PM_2.5 on total expenses for stroke is greater in southern China. ● Males may be more sensitive to air pollution than females. Air pollution has been a severe issue in China. Exposure to PM_2.5 has adverse health effects and causes economic losses. This study investigated the economic impact of exposure to PM_2.5 pollution using monthly city-level data covering 88.5 million urban employees in 2016 and 2017. This study mainly focused on three expenditure indicators to measure the economic impact considering lower respiratory infections (LRIs), coronary heart disease (CHD), and stroke. The results show that a 10 µg/m³ increase in PM_2.5 would cause total monthly expenses of LRIs, CHD, and stroke to increase by 0.226%, 0.237%, and 0.374%, respectively. We also found that LRI, CHD, and stroke hospital admissions increased significantly by 10%, 8.42%, and 5.64%, respectively. Furthermore, the total hospital stays of LRIs, CHDs, and strokes increased by 2.49%, 2. 51%, and 1.64%, respectively. Our findings also suggest heterogeneous impacts of PM_2.5 exposures by sex and across regions, but no statistical evidence shows significant differences between the older and younger adult subgroups. Our results provide several policy implications for reducing unequal public health expenditures in overpolluted countries.     

Effect of Cu-ZSM-5 catalysts with different CuO particle size on selective catalytic oxidation of N,N-Dimethylformamide

● A series of Cu-ZSM-5 catalysts were tested for DMF selective catalytic oxidation. ● Cu-6 nm samples showed the best catalytic activity and N₂ selectivity. ● Redox properties and chemisorbed oxygen impact on DMF catalytic oxidation. ● Isolated Cu²⁺ species and weak acidity have effects on the generation of N₂. N, N-Dimethylformamide (DMF), a nitrogen-containing volatile organic compound (NVOC) with high emissions from the spray industry, has attracted increasing attention. In this study, Cu-ZSM-5 catalysts with different CuO particle sizes of 3, 6, 9 and 12 nm were synthesized and tested for DMF selective catalytic oxidation. The crystal structure and physicochemical properties of the catalyst were studied by various characterization methods. The catalytic activity increases with increasing CuO particle size, and complete conversion can be achieved at 300–350 °C. The Cu-12 nm catalyst has the highest catalytic activity and can achieve complete conversion at 300 °C. The Cu-6 nm sample has the highest N₂ selectivity at lower temperatures, reaching 95% at 300 °C. The activity of the catalysts is determined by the surface CuO cluster species, the bulk CuO species and the chemisorbed surface oxygen species. The high N₂ selectivity of the catalyst is attributed to the ratio of isolated Cu²⁺ and bulk CuO species, and weak acidity is beneficial to the formation of N₂. The results in this work will provide a new design of NVOC catalytic oxidation catalysts.     

Mechanistic insights into the selective photocatalytic degradation of dyes over TiO2/ZSM-11

● TiO₂/ZSM-11 was prepared by a facile solid state dispersion method. ● Mechanism for photocatalytic degradation of dyes was investigated. ● Both experimental and MD simulations were conducted. ● Chemisorption instead of electrostatic interaction played a critical role. Photocatalytic degradation is a promising way to eliminate dye contaminants. In this work, a series of TiO₂/ZSM-11 (TZ) nanocomposites were prepared using a facile solid state dispersion method. Methyl orange (MO), methylene blue (MB), and rhodamine B (RhB) were intentionally chosen as target substrates in the photocatalytic degradation reactions. Compared to pristine TiO₂, negative effect was observed on MO degradation while promoted kinetics were collected on MB and RhB over TZ composites. Moreover, a much higher photocatalytic rate was interestingly achieved on RhB than MB, which indicated that a new factor has to be included other than the widely accepted electrostatic interaction mechanism to fully understand the selective photodegradation reactions. Systematic characterizations showed that TiO₂ and ZSM-11 physically mixed and maintained both the whole framework and local structure without chemical interaction. The different trends observed in surface area and the photo-absorption ability of TZ composites with reaction performance further excluded both as the promotion mechanism. Instead, adsorption energies predicted by molecular dynamics simulations suggested that differences in the adsorption strength played a critical role. This work provided a deep mechanistic understanding of the selective photocatalytic degradation of dyes reactions, which helps to rationally design highly efficient photocatalysts.     

Numerical simulation of benzene transport in shoreline groundwater affected by tides under different conditions

● An approach for assessing the transport of benzene on the beach was proposed. ● The behavior of benzene in the subsurface of the beach was impacted by tide. ● Tidal amplitude influenced the travel speed and the benzene biodegradation. ● Hydraulic conductivity had the impact on plume residence time and biodegradation. ● Plume dispersed and concentration decreased due to high longitudinal dispersivity. The release and transport of benzene in coastal aquifers were investigated in the present study. Numerical simulations were implemented using the SEAM3D, coupled with GMS, to study the behavior of benzene in the subsurface of tidally influenced beaches. The transport and fate of the benzene plume were simulated, considering advection, dispersion, sorption, biodegradation, and dissolution on the beach. Different tide amplitudes, aquifer characteristics, and pollutant release locations were studied. It was found that the tide amplitude, hydraulic conductivity, and longitudinal dispersivity were the primary factors affecting the fate and transport of benzene. The tidal amplitude influenced the transport speed and percentage of biodegradation of benzene plume in the beach. A high tidal range reduced the spreading area and enhanced the rate of benzene biodegradation. Hydraulic conductivity had an impact on plume residence time and the percentage of contaminant biodegradation. Lower hydraulic conductivity induced longer residence time in each beach portion and a higher percentage of biodegradation on the beach. The plume dispersed and the concentration decreased due to high longitudinal dispersivity. The results can be used to support future risk assessment and management for the shorelines impacted by spill and leaking accidents. Modeling the heterogeneous beach aquifer subjected to tides can also be further explored in the future study.     

Effect of loading rate on shear strength parameters of mechanically and biologically treated waste

● Mechanical behavior of MBT waste affected by loading rate was investigated. ● Shear strength ratio of MBT waste increases with an increase in loading rate. ● Cohesion is inversely related to loading rate. ● Internal friction angles are positively related to loading rate. ● MBT waste from China shows smaller range of φ. Mechanical biological treatment (MBT) technology has attracted increasing attention because it can reduce the volume of waste produced. To deal with the current trend of increasing waste, MBT practices are being adopted to address waste generated in developing urban societies. In this study, a total of 20 specimens of consolidated undrained triaxial tests were conducted on waste obtained from the Hangzhou Tianziling landfill, China, to evaluate the effect of loading rate on the shear strength parameters of MBT waste. The MBT waste samples exhibited an evident strain-hardening behavior, and no peak was observed even when the axial strain exceeded 25%. Further, the shear strength increased with an increase in the loading rate; the effect of loading rate on shear strength under a low confining pressure was greater than that under a high confining pressure. Furthermore, the shear strength parameters of MBT waste were related to the loading rate. The relationship between the cohesion, internal friction angle, and logarithm of the loading rate could be fitted to a linear relationship, which was established in this study. Finally, the ranges of shear strength parameters cohesion c and effective cohesion c ´ were determined as 1.0–8.2 kPa and 2.1–14.9 kPa, respectively; the ranges of the internal friction angle φ and effective internal friction angle φ ´ were determined as 16.2°–29° and 19.8°–43.9°, respectively. These results could be used as a valuable reference for conducting stability analyses of MBT landfills.     

Microbial biodegradation of plastics: Challenges,opportunities, and a critical perspective

● Health hazards of plastic waste on environment are discussed. ● Microbial species involved in biodegradation of plastics are being reviewed. ● Enzymatic biodegradation mechanism of plastics is outlined. ● Analytical techniques to evaluate the plastic biodegradation are presented. The abundance of synthetic polymers has increased due to their uncontrolled utilization and disposal in the environment. The recalcitrant nature of plastics leads to accumulation and saturation in the environment, which is a matter of great concern. An exponential rise has been reported in plastic pollution during the corona pandemic because of PPE kits, gloves, and face masks made up of single-use plastics. The physicochemical methods have been employed to degrade synthetic polymers, but these methods have limited efficiency and cause the release of hazardous metabolites or by-products in the environment. Microbial species, isolated from landfills and dumpsites, have utilized plastics as the sole source of carbon, energy, and biomass production. The involvement of microbial strains in plastic degradation is evident as a substantial amount of mineralization has been observed. However, the complete removal of plastic could not be achieved, but it is still effective compared to the pre-existing traditional methods. Therefore, microbial species and the enzymes involved in plastic waste degradation could be utilized as eco-friendly alternatives. Thus, microbial biodegradation approaches have a profound scope to cope with the plastic waste problem in a cost-effective and environmental-friendly manner. Further, microbial degradation can be optimized and combined with physicochemical methods to achieve substantial results. This review summarizes the different microbial species, their genes, biochemical pathways, and enzymes involved in plastic biodegradation.     

A critical review on thermodynamic mechanisms of membrane fouling in membrane-based water treatment process

● Fundamentals of membrane fouling are comprehensively reviewed. ● Contribution of thermodynamics on revealing membrane fouling mechanism is summarized. ● Quantitative approaches toward thermodynamic fouling mechanisms are deeply analyzed. ● Inspirations of thermodynamics for membrane fouling mitigation are briefly discussed. ● Research prospects on thermodynamics and membrane fouling are forecasted. Membrane technology is widely regarded as one of the most promising technologies for wastewater treatment and reclamation in the 21st century. However, membrane fouling significantly limits its applicability and productivity. In recent decades, research on the membrane fouling has been one of the hottest spots in the field of membrane technology. In particular, recent advances in thermodynamics have substantially widened people’s perspectives on the intrinsic mechanisms of membrane fouling. Formulation of fouling mitigation strategies and fabrication of anti-fouling membranes have both benefited substantially from those studies. In the present review, a summary of the recent results on the thermodynamic mechanisms associated with the critical adhesion and filtration processes during membrane fouling is provided. Firstly, the importance of thermodynamics in membrane fouling is comprehensively assessed. Secondly, the quantitative methods and general factors involved in thermodynamic fouling mechanisms are critically reviewed. Based on the aforementioned information, a brief discussion is presented on the potential applications of thermodynamic fouling mechanisms for membrane fouling control. Finally, prospects for further research on thermodynamic mechanisms underlying membrane fouling are presented. Overall, the present review offers comprehensive and in-depth information on the thermodynamic mechanisms associated with complex fouling behaviors, which will further facilitate research and development in membrane technology.     

Advancing ion-exchange membranes to ion-selective membranes: principles,status, and opportunities

● IEM ion/ion selectivities of charge, valence, & specific ion are critically assessed. ● Ion/molecule selectivities of ion/solvent and ion/uncharged solute are reviewed. ● Approaches to advance the selectivities through sorption and migration are analyzed. ● The permeability-selectivity tradeoff appears to be pervasive. ● Ion/molecule selectivities are comparatively underdeveloped and poorly understood. Ion-exchange membranes (IEMs) are utilized in numerous established, emergent, and emerging applications for water, energy, and the environment. This article reviews the five different types of IEM selectivity, namely charge, valence, specific ion, ion/solvent, and ion/uncharged solute selectivities. Technological pathways to advance the selectivities through the sorption and migration mechanisms of transport in IEM are critically analyzed. Because of the underlying principles governing transport, efforts to enhance selectivity by tuning the membrane structural and chemical properties are almost always accompanied by a concomitant decline in permeability of the desired ion. Suppressing the undesired crossover of solvent and neutral species is crucial to realize the practical implementation of several technologies, including bioelectrochemical systems, hypersaline electrodialysis desalination, fuel cells, and redox flow batteries, but the ion/solvent and ion/uncharged solute selectivities are relatively understudied, compared to the ion/ion selectivities. Deepening fundamental understanding of the transport phenomena, specifically the factors underpinning structure-property-performance relationships, will be vital to guide the informed development of more selective IEMs. Innovations in material and membrane design offer opportunities to utilize ion discrimination mechanisms that are radically different from conventional IEMs and potentially depart from the putative permeability-selectivity tradeoff. Advancements in IEM selectivity can contribute to meeting the aqueous separation needs of water, energy, and environmental challenges.     

Hybrid energy harvesting systems for self-powered sustainable water purification by harnessing ambient energy

● Energy harvesters harness multiple energies for self-powered water purification. ● Hybrid energy harvesters enable continuous output under fluctuating conditions. ● Mechanical, thermal, and solar energies enable synergic harvesting. ● Perspectives of hybrid energy harvester-driven water treatment are proposed. The development of self-powered water purification technologies for decentralized applications is crucial for ensuring the provision of drinking water in resource-limited regions. The elimination of the dependence on external energy inputs and the attainment of self-powered status significantly expands the applicability of the treatment system in real-world scenarios. Hybrid energy harvesters, which convert multiple ambient energies simultaneously, show the potential to drive self-powered water purification facilities under fluctuating actual conditions. Here, we propose recent advancements in hybrid energy systems that simultaneously harvest various ambient energies (e.g., photo irradiation, flow kinetic, thermal, and vibration) to drive water purification processes. The mechanisms of various energy harvesters and point-of-use water purification treatments are first outlined. Then we summarize the hybrid energy harvesters that can drive water purification treatment. These hybrid energy harvesters are based on the mechanisms of mechanical and photovoltaic, mechanical and thermal, and thermal and photovoltaic effects. This review provides a comprehensive understanding of the potential for advancing beyond the current state-of-the-art of hybrid energy harvester-driven water treatment processes. Future endeavors should focus on improving catalyst efficiency and developing sustainable hybrid energy harvesters to drive self-powered treatments under unstable conditions (e.g., fluctuating temperatures and humidity).